Split rim wheels have split.Due to safety concerns, the old HEMTT HEMTT Heavy Expanded Mobility Tactical Truck split rim wheels are no longer available. You now have to order a new two-piece, bolt-together wheel. Here's what you'll you'll Contraction of you will. you'll you will or you shall you'll will need: Item NSN 2530-01- Wheel assembly (includes inner and outer wheel 474-5564 halves, o-ring, and nuts and studs) Valve 474-5537 Valve extension 474-5539 Bead-lock 349-2058 Instructions for installing the new rims start on Page 12-32.1 of TM 9-2320-279-20-2. Just because your HEMTT needs a new wheel doesn't does·n't Contraction of does not. mean you should do a complete swap-out. Split rims are still OK to use until they become unserviceable. The bolt-together rim does require a tubeless tire, though, So Michelin XL tubed tires must be replaced with Michelin XZL or Goodyear AT2A tubeless tires Tubeless tires are pneumatic tires that do not require a separate butyl rubber inner tube. Traditional designs of pneumatic tires required a separate inner tube which could fail for a number of reasons, such as: incorrect tire fitment, or friction between the tire wall and before installing a bolt-together rim. Early-production non-wrecker HEMTTs have three 0.62-in bosses on the rear axle axle Pin or shaft on or with which wheels revolve; with fixed wheels, one of the basic simple machines for amplifying force. Combined with the wheel, in its earliest form it was probably used for raising weights or water buckets from wells. hubs. These bosses should be reworked by DS to avoid interference when installing the bolt-together rims. The procedure is on Page 11-4.1 of TM 9-2320-279-34-2 (Jun 87 w/Ch 3). |
|
||||||||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion