Shield fins from damage.Nice, straight fins are what your HMMWV HMMWV High Mobility Multipurpose Wheeled Vehicle (HMMWV is a trademark of AM General LLC; aka HUMVEE, also a trademark of AM General LLC) needs for the oil cooler to work right. Bent fins stop air flow through the oil cooler and radiator, overheating Overheating An economy that is growing very quickly, with the risk of high inflation. the engine and transmission. The fins get bent because mechanics lean or crawl onto the oil cooler when they pull engine PM or adjust belt tension. Round off the edges and paint the board to prevent splinters. Stencil stencil, cutout device of oiled or shellacked tough and resistant paper, thin metal, or other material used in applying paint, dye, or ink to reproduce its design or lettering upon a surface. NO STEP on each side of the board. To use the shield, remove the eyehook eye·hook n. A hook attached to a ring at the end of a rope or chain. seals and slip the shield over the two lifting rings, laying it flat on the oil cooler frame. The rings will hold the shield in place. Never use the shield while the engine is running because it stops air flow and causes engine overheating. Be sure to replace the eyehook seals after using the shield. |
|
||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion