Servo Puller/Cutter Masters Tricky Tubing.This new puller/cutter for medical tubing has three servo An electromechanical device that uses feedback to provide precise starts and stops for such functions as the motors on a tape drive or the moving of an access arm on a disk. motors, one for each of the two belts and a third for the cutter cutter, small, one-masted sailing vessel, with a rig similar to that of a sloop except that it usually has a sliding bowsprit and a topmast. From 1800 to 1830 cutters were in service between England and France. . The usual arrangement for a servo puller has two motors, one driving the belts and the other the cutter. This direct-driven model from Wayne Machine & Die Co., Totowa, N.J., eliminates gears, shafts, and timing belts. It thereby provides the precise speed control and instantaneous in·stan·ta·ne·ous adj. 1. Occurring or completed without perceptible delay: Relief was instantaneous. 2. speed changes required to produce "bump" or taper tubing. It is also Wayne's first puller/cutter with touchscreen See touch screen. controls. |
|
||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion