Selective soldering/rework station.
DRS DRS Drives (street suffix)
DRS Dispute Resolution Service
DRS Doctorandus
DRS Department of Rehabilitative Services
DRS Direct Registration System (securities)
DRS Department of Rehabilitation Services 24 offers selective soldering Selective soldering is the process of soldering only through-hole electronic components onto a printed circuit board that has surface mount components on the under-side. This is usually done because the surface mounted component is not glued into place, instead solder paste is used and rework of SMD (1) (Storage Module Device) A high-performance hard disk interface used with minis and mainframes that transfers data in the 1-4 MBytes/sec range (SMD-E provides highest rate). See hard disk. components
including BGAs, QFPs, flip chips, CSPs and connectors. Has solid
construction on a stable platform for precise, accurate movements. A
3500 W underboard IR preheater and 1000 W top heater minimize the
dT--crucial for Pb-free processes. Custom nozzles available.
[ILLUSTRATION OMITTED]
Zevac AG, zevac.ch
COPYRIGHT 2005 UP Media Group, Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2005, Gale Group. All rights reserved. Gale Group is a Thomson Corporation Company.
|
Printer friendly
Cite/link
Email
Feedback
Reader Opinion