Secondary belt cleaner.Razor-Back with Spray Bar is a secondary belt cleaner that uses a row of spray nozzles A spray nozzle is a device that facilitates the formation of spray. When a liquid is dispersed as a stream of droplets (atomization), it is called a spray. The typical purpose of the spray is to maximize the effect of the liquid by increasing the total surface area for better to spray a fine, sharp stream of water at a 30[degrees] angle onto the conveyor belt conveyor belt One of various devices that provide mechanized movement of material, as in a factory. Conveyor belts are used in industrial applications and also on large farms, in warehousing and freight-handling, and in movement of raw materials. where the carryback material is difficult to remove. Water is applied to the belt in an overlapping spray pattern which places the particles <onlyinclude> This is a list of particles in particle physics, including currently known and hypothetical elementary particles, as well as the composite particles that can be built up from them. into a fluid suspension, while moistening the belt. The blades of the Razor-Back with Spray Bar are then able to make consistent contact with the belt surface to remove nearly 98% or more of the coarse carry-back. Advantages of the Razor-Back with Spray Bar are said to include lubrication lubrication, introduction of a substance between the contact surfaces of moving parts to reduce friction and to dissipate heat. A lubricant may be oil, grease, graphite, or any substance—gas, liquid, semisolid, or solid—that permits free action of of the belt/cleaners interface with much lighter tensioning required; fully adjustable sprays are built into the cleaner, enabling installation in the tightest spaces; spray nozzle sizes can be customized; and more. Asgco Manufacturing www.asgco.com |
|
||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion