Rubber injection molding machines feature low height.The clamping unit of the Ergo Latin, therefore; hence; because. ergo (air-go) conj. Latin for therefore, often used in legal writings. Its most famous use was in "Cogito, ergo sum:" "I think, therefore I am" principle by French philosopher Rene Descartes (1596-1650). 630 machine is said to offer both maximized platen support, as well as low working height. To reach this objective, it was necessary for the company to move the whole combination of clamp cylinder and piston, which would cause high horizontal forces on the seals during the phase of acceleration and deceleration deceleration /de·cel·er·a·tion/ (de-sel?er-a´shun) decrease in rate or speed. early deceleration . Because of the new design and the small number of moving parts Moving parts are the components of a device that undergo continuous or frequent motion, most commonly rotation. "Parts" only include the mechanical components which does not include fuel, or any other gas or liquid. , the clamping unit is very fast and highly reliable, according to the manufacturer. The redesigned injection unit also offers a low strip intake height, while keeping the FIFO (First In First Out) A storage method that retrieves the item stored for the longest time. Contrast with LIFO. See traffic engineering methods. FIFO - first-in first-out (first in, first out) principal and the short nozzle untouched. Based on these details, the injection process takes place with the smallest pressure losses for highest cavity filling pressure available. Starlinger Maplan Circle 2 on card [ILLUSTRATION OMITTED] |
|
||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion