Robotic trimmer/router handles deeper parts.A new robotic routing, trimming, and knife deflashing system handles increased heights on thermoformed parts. The RoboTrim RT-500 from Robotic Production Technology, Auburn Auburn (ô`bərn). 1 City (1990 pop. 33,830), Lee co., E Ala.; inc. 1839. The city's economy centers around Auburn Univ.; there is some manufacturing. 2 City (1990 pop. 24,309), seat of Androscoggin co. Hills, Mich., will be shown at NPE NPE NullPointerException (Java) NPE Network Processing Engine NPE National Policy on Education NPE National Plastics Exposition NPE Natural Penis Enlargement NPE Nutrition Program for the Elderly this month in Chicago. It has an articulated-arm robot and a servo-controlled rotating ro·tate v. ro·tat·ed, ro·tat·ing, ro·tates v.intr. 1. To turn around on an axis or center. 2. table. It can trim parts 60 x 60 in. x 36 in. high. Longer parts up to 80 x 36 in. with lower heights can also be processed. The RT-500 has three sides of access to the fixture and servo An electromechanical device that uses feedback to provide precise starts and stops for such functions as the motors on a tape drive or the moving of an access arm on a disk. table, since two workers are typically needed to move the parts. The RT-500 can utilize a choice of robots, one that takes spindles with up to 3 hp and one for spindles up to 15 hp. Both have optional 6-sec automatic tool-change capability, which will be demonstrated at NPE. Tel: (248) 829-2800 * PTDirect: 416GT [ILLUSTRATION OMITTED] |
|
||||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion