|
| |
Articles
1-100 out of 100 article(s)
| Title |
Author |
Type |
Date |
Words |
| Effect of filling stage on the cooling system design of injection molding. |
Hassan, Hamdy; Regnier, Nicolas; Le Bot, Cedric; Defaye, Guy |
Report |
May 1, 2009 |
5586 |
| Optical monitoring of polypropylene crystallization during injection molding. |
Favaro, Marcia M.; Marinelli, Alessandra L.; Farah, Marcelo; Bretas, Rosario E.S. |
Technical report |
Feb 1, 2008 |
5370 |
| Experimental characterization and computational simulations of the impact behavior of injection-molded polymers. |
Viana, Julio C.; Cunha, Antonio M.; Billon, Noelle |
|
Apr 1, 2007 |
5216 |
| An investigation on the application of predictive control for controlling screw position and velocity on an injection molding machine. |
Dubay, Rickey; Pramujati, Bambang; Han, Jianguo; Strohmaier, Franz |
Author abstract |
Apr 1, 2007 |
5753 |
| Rheology studies of foam flow during injection mold filling. |
Qin, X.; Thompson, M.R.; Hrymak, A.N. |
|
Apr 1, 2007 |
4419 |
| A novel fabrication method for the mold insert of microlens arrays by hot embossing molding. |
Shen, Y.K. |
|
Dec 1, 2006 |
2738 |
| Interfacial characteristics of film insert molded polycarbonate film/polycarbonate-acrylonitrile-butadiene-styrene substrate, Part 1: influence of substrate molecular weight and film thickness. |
Leong, Y.W.; Ishiaku, U.S.; Kotaki, M.; Hamada, H.; Yamaguchi, S. |
|
Dec 1, 2006 |
4135 |
| Investigation of melt manipulation phenomena during injection molding via in situ birefringence observation. |
Angstadt, David C.; Coulter, John P. |
|
Dec 1, 2006 |
3517 |
| Injection molding of syndiotactic polystyrene/clay nanocomposites. |
Sorrentino, Andrea; Pantani, Roberto; Brucato, Valerio |
|
Dec 1, 2006 |
5425 |
| Injection molding shrinkage of PP: experimental progress. |
Pomerleau, Joel; Sanschagrin, Bernard |
|
Sep 1, 2006 |
5245 |
| Plastic shaping by means of IR heating and direct pellet molding. |
Quadrini, Fabrizio; Santo, Loredana; Tagliaferri, Vincenzo; Trovalusci, Federica |
|
Jul 1, 2006 |
3887 |
| Crystallization and thermal behavior of microcellular injection-molded polyamide-6 nanocomposites. |
Yuan, Mingjun; Turng, Lih-Sheng; Caulfield, Daniel F. |
|
Jul 1, 2006 |
7431 |
| High-frequency proximity heating for injection molding applications. |
Yao, Donggang; Kimerling, Thomas E.; Kim, Byung |
|
Jul 1, 2006 |
5285 |
| Theoretical and experimental studies of anisotropic shrinkage in injection moldings of semicrystalline polymers. |
Kwon, Keehae; Isayev, A.I.; Kim, K.H.; van Sweden, C. |
|
Jun 1, 2006 |
10349 |
| Adaptive online quality control for injection-molding by monitoring and controlling mold separation. |
Chen, Zhongbao; Turng, Lih-Sheng; Wang, Kuo-King |
|
May 1, 2006 |
6157 |
| Effects of injection-molding conditions on the gloss and color of pigmented polypropylene. |
Pisciotti, Francesco; Boldizar, Antal; Rigdahl, Mikael; Arino, Ingrid |
|
Dec 1, 2005 |
6718 |
| Weld lines in nylon 6 melt-blended nanocomposites. |
Tung, J.; Simon, G.P.; Edward, G.H. |
|
Dec 1, 2005 |
4824 |
| The effect of the volume fraction of dispersed phase on toughness of injection molded polypropylene blended with SEBS, SEPS, and SEP. |
Matsuda, Yushi; Hara, Masao; Mano, Tsuyoshi; Okamoto, Kenzo; Ishikawa, Masaru |
|
Dec 1, 2005 |
4155 |
| Injection molding-induced morphology of thermoplastic polymer blends. |
Zhong, Gan-Ji; Li, Zhong-Ming |
|
Dec 1, 2005 |
7722 |
| Ultrasonic improvement of weld line strength of injection-molded polystyrene and polystyrene/polyethylene blend parts. |
Lu, Chang; Yu, Xiaofeng; Guo, Shaoyun |
|
Dec 1, 2005 |
2947 |
| Real-time monitoring of injection molding for microfluidic devices using ultrasound. |
Ono, Y.; Jen, C.-K.; Cheng, C.-C.; Kobayashi, M. |
|
Apr 1, 2005 |
3880 |
| Injection molding of long sisal fiber-reinforced polypropylene: effects of compatibilizer concentration and viscosity on fiber adhesion and thermal degradation. |
Arzondo, L.M.; Perez, C.J.; Carella, J.M. |
|
Apr 1, 2005 |
5031 |
| Ejection force of tubular injection moldings. Part II: a prediction model. |
Pontes, A.J.; Pouzada, A.S.; Pantani, R.; Titomanlio, G. |
|
Mar 1, 2005 |
4294 |
| Morphology and mechanical properties of injection molded poly(ethylene terephthalate). |
Viana, Julio C.; Alves, Natalia M.; Mano, Joao F. |
|
Dec 1, 2004 |
6504 |
| Mathematical modeling and numerical simulation of cell growth in injection molding of microcellular plastics. |
Osorio, Andres; Turng, Lih-Sheng |
|
Dec 1, 2004 |
9347 |
| Temperature control of injection molding. Part I: modeling and identification. |
Diduch, Chris; Dubay, Rickey; Li, Wan Gui |
|
Dec 1, 2004 |
6311 |
| Temperature control in injection molding. Part II: controller design, simulation, and implementation. |
Dubay, Rickey; Diduch, Chris; Li, Wan Gui |
|
Dec 1, 2004 |
6394 |
| The effect of molding conditions on mechanical and morphological properties at the interface of film insert injection molded polypropylene-film/polypropylene matrix. |
Leong, Y.W.; Yamaguchi, S.; Mizoguchi, M.; Hamada, H.; Ishiaku, U.S.; Tsujii, T. |
|
Dec 1, 2004 |
3366 |
| Shrinkage and warpage prediction of injection-molded thin-wall parts using artificial neural networks. |
Liao, S.J.; Hsieh, W.H.; Wang, James T.; Su, Y.C. |
|
Nov 1, 2004 |
7730 |
| Runner balancing by a direct genetic optimization of shrinkage. |
Alam, Kevin; Kamal, Musa R. |
|
Oct 1, 2004 |
7773 |
| Flow and heat transfer simulation of injection molding with microstructures. |
Yu, Liyong; Lee, L. James; Koelling, Kurt W. |
|
Oct 1, 2004 |
6714 |
| A temperature-dependent adaptive controller. Part I: controller methodology and open-loop testing. |
Dubay, Rickey; Lakhram, Rodney |
|
Oct 1, 2004 |
6962 |
| A model-based virtual sensing approach for the injection molding process. |
Cheng, J.-W. John; Chao, Tzu-Ching; Chang, Lih-Harng; Huang, Bo-Feng |
|
Sep 1, 2004 |
6513 |
| The thermomechanical environment and the mechanical properties of injection moldings. |
Viana, Julio C.; Billon, Noelle; Cunha, Antonio M. |
|
Aug 1, 2004 |
6444 |
| Capacitive transducer for in-mold monitoring of injection molding. |
Chen, Xi; Chen, Guohua; Gao, Furong |
|
Aug 1, 2004 |
5037 |
| Water-assisted injection molding of thermoplastic materials: effects of processing parameters. |
Liu, Shih-Jung; Chen, Yen-Show |
|
Nov 1, 2003 |
3931 |
| Three-dimensional simulation of multi-material injection molding: application to gas-assisted and co-injection molding. |
Ilinca, Florin; Hetu, Jean-Francois |
|
Jul 1, 2003 |
4369 |
| New flow simulalion for microcellular foams. (Injection Molding). |
|
Brief Article |
Jun 1, 2003 |
129 |
| Blends of a bottle-grade polyethylene terephthalate copolymer with a liquid crystalline polymer. Part II: thermal and transport properties. |
Silva, L.B. Da; Marinelli, A.L.; Ruvolo-Fileho, A.; Bretas, R.E.S. |
|
Aug 1, 2002 |
7969 |
| In-line monitoring of the injection molding process by dielectric spectroscopy. |
Gonnet, Jean-Marc; Guillet, Jacques; Raveyre, Claude; Assezat, Gilles; Fulchiron, Rene; Seytre, Gera |
Abstract |
Jun 1, 2002 |
4510 |
| Experimental investigation and numerical simulation of injection molding with micro-features. |
Yu, Liyong; Koh, Chee Guan; Lee, L. James; Koelling, Kurt W.; Madou, Marc J. |
Abstract |
May 1, 2002 |
6937 |
| Ejection force modeling for stereolithography injection molding tools. |
Pham, Giang T.; Colton, Jonathan S. |
Abstract |
Apr 1, 2002 |
6357 |
| Metal injection molding: 3D modeling of nonisothermal filling. |
Ilinca, Florin; Hetu, Jean-Francois; Derdouri, Abdessalem; Stevenson, James (American writer and ill |
Abstract |
Apr 1, 2002 |
4270 |
| Modeling of structural reaction injection molding. Part II: comparison with experimental data. |
Polushkin, Evgeny Yu.; Polushkina, Olga M.; Malkin, Alexander Ya.; Kulichikhin, Valery G.; Michaeli, |
Abstract |
Apr 1, 2002 |
6334 |
| Chemical modification of polyurethane for two-component injection molding. |
Brauer, M.; Hupfer, B.; Nagel, J.; Lehmann, D. |
Abstract |
Apr 1, 2002 |
5753 |
| A full 3D finite element analysis of the Powder Injection Molding filling process including slip phenomena. |
Hwang, C.J.; Kwon, T.H. |
|
Jan 1, 2002 |
9022 |
| Study on the residual wall thickness at dimensional transitions and curved sections in gas-assisted molded circular tubes. |
Yang, S.Y.; Chou, H.L. |
|
Jan 1, 2002 |
3117 |
| Computer Simulation of Stress-Induced Crystallization in Injection Molded Thermoplastics. |
Guo, Jianxin; Narh, Kwabena A. |
Statistical Data Included |
Nov 1, 2001 |
7396 |
| Relevance of Mold-Induced Thermal Boundary Conditions and Cavity Deformation in the Simulation of Injection Molding. |
Pantani, R.; Speranza, V.; Titomanlio, G. |
Statistical Data Included |
Nov 1, 2001 |
7680 |
| On-line Measurement of Polymer Orientation Using Ultrasonic Technology. |
EDWARDS, RUSS; THOMAS, CHARLES |
|
Sep 1, 2001 |
4557 |
| Reaction Injection Molding Process of Glass Fiber Reinforced Polyurethane Composites. |
KIM, DAE SU; MACOSKO, CHRISTOPHER W. |
|
Oct 1, 2000 |
6140 |
| Flow Behavior of LCP Melts and Its Influence on Morphology and Mechanical Properties of Injection Molded Parts [*]. |
NGUYEN, T. N.; GEIGER, K.; WALTHER, TH. |
|
Jul 1, 2000 |
4608 |
| Nature of Contact Between Polymer and Mold in Injection Molding. Part I: Influence of a Non-perfect Thermal Contact. |
DELAUNAY, D.; BOT, P. LE; FULCHIRON, R.; LUYE, J. F.; REGNIER, G. |
Statistical Data Included |
Jul 1, 2000 |
4829 |
| Nature of Contact Between Polymer and Mold in Injection Molding. Part II: Influence of Mold Deflection on Pressure History and Shrinkage. |
DELAUNAY, D.; BOT, P. LE; FULCHIRON, R.; LUYE, J. F.; REGNIER, G. |
|
Jul 1, 2000 |
3901 |
| A Visual Barrel System for Study of Reciprocating Screw Injection Molding. |
GAO, FURONG; JIN, ZHIMING; CHEN, XI |
|
Jun 1, 2000 |
3811 |
| Thermal Effects on Stereolithography Injection Mold Inserts. |
COLTON, JONATHAN S.; LEBAUT, YANN |
|
Jun 1, 2000 |
3085 |
| Morphology of Injection Molded Modified Poly(phenylene oxide)/Polyamide-6 Blends. |
SON, YOUNGGON; AHN, KYUNG HYUN; CHAR, KOOKHEON |
|
Jun 1, 2000 |
3506 |
| Effect of Processing Conditions and Reactive Compatibilizer on the Morphology of Injection Molded Modified Poly(phenylene oxide)/Polymide-6 Blends. |
SON, YOUNGGON; AHN, KYUNG HYUN; CHAR, KOOKHEON |
|
Jun 1, 2000 |
4049 |
| Failure mechanisms in Stereolithography Injection Molding Tooling. |
PALMER, A.E.; COLTON, J.S. |
|
Jun 1, 2000 |
5929 |
| Co-injection Molding: Effect of Processing on Material Distribution and Mechanical Properties of a Sandwich Molded Plate. |
SELDEN, R. |
|
May 1, 2000 |
3993 |
| Production of Injection Molding Tooling With Conformal Cooling Channels Using the Three Dimensional Printing Process. |
SACHS, EMANUEL; WYLONIS, EDWARD; ALLEN, SAMUEL; CIMA, MICHAEL; GUO, HONGLIN |
|
May 1, 2000 |
6826 |
| An Experimental Matrix Design to Optimize the Weldline Strength in Injection Molded Parts. |
LIU, SHIH-JUNG; WU, JUN-YU; CHANG, JER-HAUR; HUNG, SHIU-WAN |
|
May 1, 2000 |
2583 |
| A Fuzzy Multiobjective Approach for Minimization of Injection Molding Defects. |
TAN, K. H.; F. YUEN, M. M. |
Statistical Data Included |
Apr 1, 2000 |
6333 |
| Statistical Study of the Effects of Processing Conditions on the Impact Strength. |
Barbosa, Silvia E.; Kenny, Jose M. |
|
Oct 1, 1999 |
4457 |
| Numerical Modeling of Injection/Compression Molding for Center-Gated Disk: Part I. Injection Molding With Viscoelastic Compressible Fluid Model. |
Kim, I. H.; Park, S. J.; Chung, S. T.; Kwon, T. H.; on mo |
|
Oct 1, 1999 |
6668 |
| Numerical Modeling of Injection/Compression Molding for Center-Gated Disk: Part II. Effect of Compression Stage. |
Kim, I. H.; Park, S. J.; Chung, S. T.; Kwon, T. H. |
|
Oct 1, 1999 |
3991 |
| Comparison of Residual Stress Predictions and Measurements Using Excimer Laser Layer Removal. |
Jansen, K. M. B.; Orij, J. J. W.; Meijer, C. Z.; Van Dijk, D. J. |
|
Oct 1, 1999 |
5305 |
| Effects of injection molding-induced morphology on the work of fracture parameters in rubber-toughened polypropylenes. |
Karger-Kocsis, J.; Mouzakis, D.E. |
|
Aug 1, 1999 |
3680 |
| Mechanical behavior of injection-molded polystyrene/polyethylene blends: fracture toughness vs. fatigue crack propagation. |
Bureau, M.N.; Francesco, E. Di; Denault, J.; Dickson, J.I. |
|
Jun 1, 1999 |
5279 |
| Control of part weight in injection molding of amorphous thermoplastics. |
Kamal, Musa R.; Varela, Alfredo E.; Patterson, W. Ian |
|
May 1, 1999 |
4484 |
| Bubble growth in reaction injection molded parts foamed by ultrasonic excitation. |
Youn, Jae R.; Park, Hyeok |
|
Mar 1, 1999 |
4124 |
| Runner sizing. |
Lee, Ching-Chih; Stevenson, James F. |
|
Feb 1, 1999 |
5243 |
| Study of 'gas fingering' behavior in gas-assisted injection molding. |
Chiang, H.H.; Fong, L.; Zhao, J.; Lu, X. |
|
Jan 1, 1999 |
6139 |
| Solid state and mechanical properties of injection molded poly(ether ether ketone)/polyarylate blends. |
Arzak, A.; Eguiazabal, J.I.; Nazabal, J. |
|
Nov 1, 1998 |
5458 |
| Mechanism of void growth in the partial frame process. |
Ahn, Kyung Hyun; Kim, Dong-Hak |
|
Oct 1, 1998 |
4076 |
| Experimental study and numerical simulation of the injection stretch/blow molding process. |
Schmidt, F.M.; Agassant, J.F.; Bellet, M. |
|
Sep 1, 1998 |
5025 |
| Experimental study of the transcription of minute width grooves by injection molding. |
Yoshii, Masaki; Kuramoto, Hiroki; Ochiai, Yuuji |
|
Sep 1, 1998 |
2735 |
| Effect of processing conditions on shrinkage in injection molding. |
Jansen, K.M.B.; Dijk, D.J. Van; Husselman, M.H. |
|
May 1, 1998 |
3935 |
| Fluorescence monitoring of polymer injection molding: model development. |
Bur, Anthony J.; Thomas, Charles L. |
|
Sep 1, 1997 |
7194 |
| Control of plastic melt temperature: a multiple input multiple output model predictive approach. |
Dubay, Rickey; Bell, Adam C.; Gupta, Yash P. |
|
Sep 1, 1997 |
6073 |
| Creep and physical aging of injection molded, fiber reinforced polypropylene. |
Read, B.E.; Tomlins, P.E. |
|
Sep 1, 1997 |
4961 |
| Fiber orientation. |
Greene, Joseph P.; Wilkes, James O. |
|
Jun 1, 1997 |
4195 |
| Finite element analysis for the flow characteristics along the thickness direction in injection molding. |
Lee, Ho-Sang |
|
Mar 1, 1997 |
3213 |
| Injection pressures and flow. |
Greene, Joseph P.; Wilkes, James O. |
|
Mar 1, 1997 |
6103 |
| Polymer flow length simulation during injection mold filling. |
Buchmann, M.; Theriault, R.; Osswald, T.A. |
|
Mar 1, 1997 |
2768 |
| The structure and morphology of syndiotactic polystyrene injection molded coupons. |
Evans, A.M.; Kellar, E.J.C.; Knowles, J.; Galiotis, C.; Carriere, C.J.; Andrews, E.H. |
|
Jan 1, 1997 |
6161 |
| A study of rib geometry for gas-assisted injection molding. |
Yang, S.Y.; Huang, F.Z.; Liau, W.N. |
|
Dec 15, 1996 |
3293 |
| Foam formation in gas-assisted injection molded parts: theoretical and experimental considerations. |
Moritzer, E.; Obermann, Ch.; Potente, H. |
|
Aug 1, 1996 |
4375 |
| Fracture behavior of glass bead-filled poly(oxymethylene) injection moldings. |
Hashemi, S.; Din, K.J.; Low, P. |
|
Jul 15, 1996 |
5855 |
| Residual thermal stresses in injection molded products. |
Zoetelief, W.F.; Douven, L.F.A.; Housz, A.J. Ingen |
|
Jul 1, 1996 |
5341 |
| Online pattern-based part quality monitoring of the injection molding process. |
Woll, Suzanne L.B.; Cooper, Douglas J. |
|
Jun 15, 1996 |
6607 |
| The development of flow instabilities during the injection molding of multicomponent resins. |
Hobbs, S.Y. |
|
Jun 15, 1996 |
3214 |
| Throughput calculation with considerations of leakage flow on injection molding plasticizing units. |
Potente, H.; Effen, N.; Liu, J. |
|
Jun 15, 1996 |
2978 |
| Cavity pressure dynamics and self-tuning control for filling and packing phases of thermoplastics injection molding. |
Patterson, W.I.; Gao, F.; Kamal, M.R. |
|
May 15, 1996 |
7287 |
| Generalized warpage parameter. |
Kikuchi, Hiroyuki; Koyama, Kiyohito |
|
May 1, 1996 |
4994 |
| The relation between thickness and warpage in a disk injection molded from fiber reinforced PA66. |
Kikuchi, Hiroyuki; Koyama, Kiyohito |
|
May 1, 1996 |
4486 |
| Warpage, anisotropy, and part thickness. |
Kikuchi, Hiroyuki; Koyama, Kiyohito |
|
May 1, 1996 |
5876 |
| Influence of processing on quality of injection-compression-molded disks. |
Yang, S.Y.; Ke, M.Z. |
|
Aug 15, 1995 |
3806 |
| Experimental and theoretical studies of shrinkage, warpage, and sink marks of crystalline polymer injection molded parts. |
Chang, R.Y.; Tsaur, B.D. |
|
Aug 15, 1995 |
4734 |
| Predicting mechanical properties of acrylonitrile-butadiene-styrene terpolymer in injection molded plaque and box. |
Kim, B.H.; Hwang, T.W.; Park, Hern Jin |
|
Aug 15, 1995 |
3599 |
|
