Remove A-20 before welding?Got any electric arc or resistance welding Resistance welding A process in which the heat for producing the weld is generated by the resistance to the flow of current through the parts to be joined. scheduled for your combat vehicle? Better check to see if it's equipped with ah A-20 personnel heater, NSN NSN National Stock Number NSN Nokia Siemens Networks NSN National Storytelling Network NSN NATO Stock Number NSN New Substances Notification (CEPA) NSN National Student Number (NZ) NSN Never Say Never 2540-01-396-2826, first. IF IT IS YOU'LL HAVE TO FOLLOW THESE GUIDELINES BEFORE WELDING. OTHERWISE, MY CIRCUIT BOARDS GET FRIED. 1. Disconnect the vehicle power cable at the heater's MS power connector A power connector is an electrical connector designed to carry a significant amount of electrical power, usually as DC or low-frequency AC. Some types of RF connector may also carry large amounts of power, but are considered as a separate category. , not from the control panel. 2. If the heater has any accessory items disconnect the cables. 3. Make the welding ground point as close as possible to the welding area. 4. If the beater beat·er n. 1. One that beats, especially a device for beating: a carpet beater. 2. A person who drives wild game from under cover for a hunter. is between the area being welded and the welding ground point, remove the heater. Disconnect power cable from heater Disconnect accessory cables before welding |
|
||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion