Reinforced plastics equipment.

ADM-ISOBLOC GMBH

Continuous casting machines for polymer concrete, solid surface, engineered stone, cultured marble, phenolic-resin foam and epoxy electrical insulators. Logo line of machines includes four standard models for outputs of 4.4 to 600 lb/min. Resin, catalyst, and accelerator are metered by separate electrically driven pumps. Units have PLC controls and fast cleanout system said to consume little solvent.

Options include lifting/turning systems to feed molds, multicolor feeding, heating for filler and resins, and a densifier with continuous air evacuation for solid-surface countertops. Also spray-up systems for gel-coat and chop.

ADVANCED MATERIALS, INC.

Vacuum-only closed-molding system does not require the pumping system necessary for RTM and VRTM. It uses lightweight molds, which can be lifted easily without hoist. Low-cost vacuum pump is the only equipment required.

Also impregnators, prepreg, and tape wet-out systems. Manufacturing training programs and consulting available.

ADVANCED PROCESS TECHNOLOGY, INC.

Wide range of manual and fully automatic meter/mix/dispense equipment for plural-component RTM and RIM nylon, PUR, epoxy and polyester. Flying Wedge features variable ratio, temperature control to 300 E vacuum degassing, positive-displacement metering, and output rates from 5 g/min to 70 lb/min. Systems process heavily filled abrasive materials and unfilled formulations for open casting, pressure injection into closed molds, high-vacuum potting, and filament winding.

AMERICAN GFM 

CompForm automated preforming process for RTM, SRIM and all LCM processes. Process allows use of virtually any reinforcing material to make highly complex preforms. Process does not use heat to stabilize preform.

Company provides manufacturing systems that include high-speed ultrasonic cutting machines. Process provides capability for high-volume and net-shape preforms and allows engineering fabrics, fasteners and core materials to be included in the preform assembly.

AUTOMATION DYNAMICS

Filament winding machines up to 12-ft diam. x 40 ft long, either mechanically synchronized or with full computer control. Mechanical machines with as many as three axes and computer machines with up to six axes. Small laboratory and educational machines, mandrel extractors, resin delivery systems and fiber creels also available.

Unidirectional tape prepreg machines with on- or off-line resin film casting systems can be built in widths to 24 in.

Broad-goods impregnators and laminators available.

BRENNER INTERNATIONAL

Fiberglass roving cutters in three models: Model 800A in widths from 4.5 to 18 in. and cut lengths from 1.5 mm to 2 in.; Model 800B in widths from 24 to 110 in. and cut lengths from 0.5 to 4 in.; and patent pending Model 800V, which does away with standard razor blade cutter roll. Cutter roll has carbide blades and cuts against an anvil. Unit self sharpens during cutting operation. Cutting length can be changed during operation and will cut from 1 mm to 4 in.

Preforming machines in single stage, plenum and directed-fiber rotary models with turntables from 24-120 in. diam. Curing accomplished by gas, electric or ultraviolet means.

SMC systems from 24 to 62 in. wide. Wetout accomplished by passing through a steel belt compaction unit. Optional resin distribution systems with in-line mixers, turret winders, and festooners.

Also collapsible mandrels from 24 to 60 in. diam. in closed- or open-end models; and chopped strand mat lines in various widths.

CENTURY DESIGN, INC.

Specializes in composite equipment for making hollow tubular structures such as golf shafts, fishing rods, tennis racquets, helicopter blades, and medical prostheses. Automated and computer-controlled systems for high-volume and precision parts. Complete turnkey systems and individual machines such as tape layers, tape wrappers, prepreg slitters, pattern cutters, frictionless tensioners for tape and filament, mandrel extractors and cleaners, centerless grinders and wet sanders.

CINCINNATI MACHINE, LLC 

Composite tape layers for thermosets and thermoplastics are automated systems for measuring, cutting, and laying down courses of prepreg tape on flat or contoured surfaces. Multi-axis tape laydown head mounted on a beam that travels on overhead rails. Natural Path software allows off-line analysis of layup on a contoured surface.

Head of thermoplastic tape layer has three heating and two cooling compaction shoes. Heating shoes are cartridge-heated up to 1000 E Capable of end cuts from +45[degrees] to 45[degrees]. Lays only flat panels, which can then be formed.

CM100 control system offers 10 axes of coordinated control with individual acceleration and deceleration rate, and Look Ahead software to prevent laying down defective tape.

Viper Fiber Placement System (FPS), is a seven-axis machine that can place fiber tows along paths not achievable by manual lay-up or automated tape-laying systems. Fiber-placement head on a robotic arm applies some heat while compaction roller on a head allows work on concave surfaces with minimal secondary debulking. Lays up to 32 individual, 0.125-in.-wide tows, and can cut and restart tows individually. Can lay up contoured ply shapes, follow serpentine ply paths, construct tapered shapes, and create localized buildups if necessary.

CONAIR

Heavy-duty pullers specifically designed for pultrusion (up to 20-hp drives and speeds to 120 ft/min) include numerous models and capacities, in-line cutoff saws and pneumatic dump tables. Units handle part envelope to 6 in. high by 12 in. wide. Continuous pulling forces up to 10,000 lb. Traveling saw with abrasive or diamond blade for wet or dry cutting. Puller controls include a-c vector drives and even servo-drive technology. Load-cell force gauge available to display pulling force.

CON-TEK MACHINE, INC.

Urethane fixturing equipment, specializing in RIM/RTM clamps. Clamps can be designed with manual or fully automatic electrical control systems, adjustable tilt capabilities, intrinsically safe components, and with or without mixhead handling systems. In addition to standalone booking clamps, a variety of styles are available including mold-shuttle clamps, rotary tables and four-post designs.

DIEFFENBACHER NORTH AMERICA INC.

Builds hydraulic high-speed presses and press-system auxiliaries. Presses from 300 to 5000 tons with bed sizes from 40 x 40 in. to 200 x 160 in. High-precision presses available with parallelism control.

Auxiliary components include automatic GMT conveyor ovens, CNC loaders for GMT or SMC charges (max. 6 axes), proprietary gripper technology (needle, suction or mechanical type) for GMT and SMC charge and parts handling, cooling stations for GMT and SMC parts, and quick-mold-change systems. Also cell controls with strategic emergency programs, master control systems interlinking several production cells via an intelligent network, production and process data-acquisition systems, and SPC and process data analysis.

Inline compounding systems for the production of reinforced fiber thermoplastic applications.

DURA WOUND INC.

Two-axis filament winding machines and related equipment available in four basic models with a choice of mechanical or digital position motion control.

Model PC-104 table-top winder uses position control technology to wind precision parts to 12-in. diam. and 4 ft long. Standalone or PC operation.

Cobra Model 11-A laboratory winder handles hoop and helical patterns to 36-in. diam. and 5 ft long.

Model 10-C pipe and duct winder designed so a single operator can wind mandrels 2- through 48-in. diam. to 20 ft long. Standard machine includes 20-strand E-Glass delivery system with creel rack.

Model 20 tank winder for hoop and helical patterns 2- to 288-in. diam. and 20 ft long. Standard machine includes 20-strand E-Glass delivery system with creel rack.

Longer length capacity, fiber tensioning devices and heated baths for carbon, E-Glass, and Kevlar available for all machines. Pipe mandrels 2-through 12-in. diam. to 42 ft long are centerless ground with a 0.003 in./ft taper. Collapsible tank mandrels 14- through 288-in. diam. are 22 ft long and use mechanical screw-jacks for opening and closing.

ELECTROSTATIC TECHNOLOGY INC. SUB. OF NORDSON CORP.

Equipment to make prepregs via dry-powder application. Product forms include fabrics and tow. Process also can be used to make tackified fabric and fibers for RTM processing. Resins include engineering thermoplastics such as PEEK, nylon, and PP as well as thermosets. Process is solvent-free because electrostatic charge is used to deposit powder.

EMC2 INC.

Complete line of meter/mix/dispense equipment for two-component adhesives.

SMC impregnating machines, press loaders and unloaders, in-mold coating systems, and complete lines with cooling, automatic deflashing, drilling, milling and adhesive bonding. Also RTM metering equipment and complete automated turnkey systems. Trim presses up to 200 tons.

Also press-leveling systems for compression molding presses, along with loaders and unloaders.

ENTEC COMPOSITE MACHINES, INC.

Machinery for filament winding, fiber placement, pultrusion, and RTM. Standard and custom modular winding and fiber-placement machines have four to six axes of control, brushless d-c servo motors on all axes, and CMC1 PC-based computer control as standard. New low-cost winders for pipe, ducts, and tanks have chain-driven carriages and d-c or servo-driven spindle. Two-axis winder for 10 golf shafts also available. Cadwind pattern-generation software for PCs calculates winding patterns for up to six axes. ET1 electronic fiber tensioner also offered.

Line of pultrusion machines from low-cost basic models to sophisticated servo-driven machines with PC control. Pulling forces from 500 to 20,000 lb, speeds of 60-240 in./min, and work envelopes from 1 x 1 in. to 24 x 10 in. Pullers can be formed-wheel, caterpillar, or reciprocating-platen types.

Also pultrusion dies (including injection type), fiber creels, forming guides, resin baths, overwinding stations, mat slitters, flying cutoff saws, drill stations and notchers, roll-off tables, routers, trimmers, and other auxiliaries.

Also gantry systems for fiber placement and tape laying, plus computer-controlled resin mixing, pumping, and weighing systems for RTM, filament winding, and pultrusion. Large-bed, low-pressure presses for RTM and prepregging have electric ball-screw drive and cart-mounted lower platens.

FINN & FRAM, INC.

Turnkey systems and individual components for SMC lines, FRP panel lines, mat lines, prepreg treaters, and laminate preparation machines (LPM). Components include extra wide cutters, heavy-duty dual-wire mesh belt compaction modules, bulk packagers, festooners, dual-turret winders, and open or closed dynamic inline mixing/metering systems.

Also fiber cutters that chop fiberglass continuously to 1.5 through 50 mm cut lengths. Chopped strand production cutters range in capacity to 3 tons/hr. Extra wide cutters from 4 to 160 in. wide are used to spread cut fibers on a web of any width.

GLAS-CRAFT INC.

Mix and meter dispensing machines currently include eight external-mix systems for gel-coat and spray-up that feature company's AAC air-assist containment pattern management system.

INDy nonatomized internal-mix spray-up system features the INDy single orifice-directed column nonatomized dispense nozzle.

Also markets several models of the Spartan RTM system and APD adhesive/putty dispensing system.

GRACO INC.

Plural-component equipment systems for metering, mixing, spraying or casting PUR, epoxy, polysulfide or filled polyester. Pumping units with mix ratios from 1:1 to 18:1 draw materials from catalyst and resin storage tanks, and deliver components to a static-mixing head where a transfer hose can be used to deliver mix to spray guns or dispensing valves.

GS MANUFACTURING

Airless chopper, wet-out and gel-coat spray systems feature "no-flush" external mixing and are reported to offer simple operation, built-in safety factors, and fast, efficient production.

Gun is lightweight (3 lb, 7 oz) with a single-finger, air-assist trigger control. The gun can be converted from chopper gun to gel-coater with removal of one bolt and change of tip. Chopper-gun mount has a swivel for instant alignment of glass and material spray pattern.

Gun does not need solvent flushing and because of low pressures can be operated within 6-8 in. of the mold, delivering 3 to 23 lb/min. Catalyst is safely used directly from shipping container and is pumped through an easy-to-maintain pumping system. Systems can be stationary or portable.

"True" airless or airless/air-assist MEKP systems. Compact Little Willie gelcoat unit with lightweight gun mounts on 5-gal pail. RC42 Rascal chopper system features lightweight gun, high-speed/high-torque chopper motor, and spring boom that has 5-ft vertical movement with adjustable tension.

Also high-volume wet-out systems, Multi Color Block for up to eight gelcoat colors, and Big Bertha high-volume chopper gun that can dispense up to 35 lb/min of laminate and handle six strands of glass.

Gemini variable-ratio urethane/polyester hybrid spray system features internal-mix Rascal hybrid spray gun with chopper, transfer pumps, variable-ratio proportioning system, in-line heaters, heated hoses, and portable cart with 12-ft boom.

Superflow chopper/wet-out flowcoaters for low voc requirements (below 50 ppm) feature patented F1 nozzle/mixer.

RTM system is based on Little Willie gun with a static-mixing extension, 5:1 air-motor pump, and catalyst slave system. Mounts on 5-gal pail or wall; can be used with saturator or resin-roller attachments.

All polyester spray equipment available as internal or external spray.

Also high-volume Big Willie polyester putty dispensers and high-viscosity adhesive dispensing.

GUSMER I DECKER DIV. OF GRACO INC.

Variable-ratio DeltaRim impingement-mixing RIM machinery for RTM and SRIM dispensing at 40 to 240 lb/min. Double-acting Continuous Delivery Cylinder (CDC) pump system provides uniform flow and unlimited shot sizes.

Series HPV cylinder dispensing systems with outputs from 0.8 to 26 lb/sec for RIM and RRIM materials. The machines are equipped with a mechanical feedback system that ensures accurate throughput and ratio control. Optional features include an automatic nucleation control.

HI-TECH ENGINEERING, INC.

High- and low-pressure RTM metering/ mixing equipment and clamps, RIM and large LD-SRIM systems.

High-pressure RTM series has hydraulic cylinders with component metering capacities from 500 to 20,000 cc each, typically paired in a 4:1 or greater size ratio. Process controls for all machine functions, with optional full computer interface and SPC package. High-pressure impingement mixhead has external recirculation. Can be modified for high-temperature applications to 400 F.

Quantum Flow is an entry-level RTM machine with reportedly excellent metering capability, ratio control, and flexibility. Provides continuous material flow with accurate hydraulic metering at ratios from 100:1 to 1:1. Handles most fillers, including chopped fiberglass.

Dura Flow cylinder-type RTM machine processes polyesters, vinyl esters, epoxies, and urethanes. Large-volume resin cylinder is mechanically linked to low-volume catalyst cylinder. Quick-change linkage varies ratio in four discrete increments from 20:1 to 200:1. All-pneumatic operation, material recirculation, special cylinder design with equal flow in both directions, and large free-flow material path.

Tech Flow top-of-the-line RTM machine with PLC or computer controls and complete SPC capability features full closed-loop ratio and output control, temperature control system, injection by constant pressure or flow rate, and Windows-based interface. Customized to meet production or laboratory needs.

ITW INDUSTRIAL FINISHING

Internal- or external-mix, high-transfer-efficiency guns for spraying resins, gel coat or chop; RTM systems; roller impregnators; and hand-held resin rollers.

Catalyst slave-pump or pressure-tank feed systems can be combined with various air- and hydraulic-powered pumps.

Mat impregnators include an economical model with a hand crank to dispense mat from a roll between two impregnating rollers and onto a take-up roll. Resin is hand poured from a bucket into the adjustable gap between impregnating rolls. A more elaborate model can have an air motor and foot pedal in place of hand crank and allows automatic pumping of continuously catalyzed resin through a perforated metal pipe mounted over the gap. Automatic flushing can be provided.

JAECO FLUID SYSTEM INC.

Plunger, diaphragm, and solenoid-type metering pumps for RTM or other systems. Variable speed motors and controllers.

LINCOLN INDUSTRIAL

Air-operated pumps for transfer and spray-up of FRP fluid materials from 55-gal drums, 5-gal pails, or bulk tanks. Pumps operate inside or outside containers to move product to mixer or spray head. Pump accessories include primers, pressure primers, hose, control valves, measuring valves, mixing and metering equipment.

LINDEN INDUSTRIES, INC.

Plural-component metering/dispensing systems, mold-carriers, and clamps for SRIM, RRIM and RTM.

LIQUID CONTROL CORP. DIV. OF GRACO INC.

Positive-displacement metering equipment for high-performance composite parts. Equipment easily manages single- or multiple-component materials with a wide range range of viscosities. RTM systems for aerospace, filament-wound fuel cells, continuous strand pultrusion, hand lay-up products, and others. Optional heating and degassing features available for all systems. Also flow rate, pressure and ratio monitoring for manufacturing specifications.

LITTLEFORD DAY INC.

SMC and BMC mixing components and complete compound production systems supplied through association with RP/C Corp.

C.A. LITZLER CO., INC.

Prepreg fabric saturation systems for fiberglass, graphite, and aramid include let-offs, splice presses, precision metering rolls, curing ovens, compaction rolls, and windups. Pollution-control incinerators and electronic drives and instrumentation included.

MCT/Thermovation plastic dip molding and coating systems for vinyl and plastisol products are fully automatic dipping, curing and drying systems.

MAGNUM VENUS PRODUCTS

Spray-up equipment includes an airless/air-assist chopper gun. Trigger reduces operator fatigue and eliminates lead/lag between catalyst and resin.

ATG-3500 gelcoat/wet-out gun also incorporates patented airless/air-assist technique and reportedly gives superior pattern control on gelcoat without tails. Air trigger allows feathering into tight recesses without flooding and eliminates possibility of spraying catalyst without gelcoat.

Putty dispensing machine handles any type of marine putty at viscosities to 3,000,000 cp. Slave arm meters catalyst in 0.1% increments. Putty and catalyst mixed and dispensed through a mixing block and chamber.

Self-balancing, internal-mix chopper system automatically balances catalyst pressure when spray pressures or outputs are changed. Self-balancing, internal-mix gelcoat system operates in much the same way as the chopper, resulting in reportedly superior mixing.

Three-component, internal-mix foaming polyester system meters both catalyst and blowing agent, which are mixed with resin at the gun.

Internal-mix resin-roller impregnator mixes resin and catalyst at the roller and introduces catalyzed resin inside the perforated roller, where it is evenly distributed.

Systems for polyester and fiberglass open-mold and closed-mold processes. Patented H.I.S. (hydraulic injection system) uses internal, airless, low-pressure mixing and is incorporated into a line of low-styrene, reinforced thermoset plastic systems that include:

* Hand-held spray-up units such as chopper guns, saturators and gelcoaters with accessories and support equipment. ProSeries Line includes the ProGun, which is included with the portable ProSeries Gelcoater and the Advantage Series for entry level operations. Also FlowChop and FlowFill systems for low styrene emissions and filled resin systems.

* Resin injection and RTM units for low-pressure filling of closed molds include economical H.I.S.-based Hydrajectors, EPO2 and EPO3 meter/mix series.

* Material Monitoring System for resin and glass monitoring.

* Casting units for open molds or cavity filling.

* Automated reciprocators for high-volume production of FRP sheet products.

* Impregnators for mechanized wet-out of woven roving and lay-up into large molds. Four-roll configurations including bridge crane and gantry configurations, as well as an 18-incher for lapping boat stringe and bulkheads.

* Filament winders for automated production of large-diam, tanks and pipe.

* Polyester foam units for low-fume spraying of polyester foam.

* Filled resin systems for mixing and dispensing with fillers.

* Laminating rollers with "thin-fin" design for rolling out saturated woven roving.

MARTIN PULTRUSION GROUP INC.

Durapul pultrusion machines have touchscreen PC controls, reciprocating-clamp pullers that get a 20-in.-long grip on the part, and down-acting clamps that do not displace the part from the production plane so as to reduce warpage. Special die-alignment system allows tool to be raised, lowered, and pivoted in two dimensions to counteract any bowing tendency in complex profiles. Five standard models have pulling forces of 3-20 tons and product envelopes from 8 x 3 in. to 48 x 24 in.

Also Durafile pultrusion dies in standard or hardened steels are chrome-plated for long life and can be supplied with or without forming systems, mandrels and mandrel mounting systems, and heating systems for optiaml processing speeds.

MCGILL AIRPRESSURE CORP.

Autoclave systems operate at up to 1200 F and 2000 psi with electric heaters and inert-gas pressurizing medium. Vessels can have patented door assemblies with pneumatic or hydraulic cylinders, fans, electric heaters, cooling-coil heat exchangers, and internal track. Other components include preassembled and piped vacuum supply platforms for quick field installation, control panels for temperature and pressure cure cycles, process-variable recorders with graphic display, and vacuum-monitoring and recording panels to ensure part quality.

Mini-Bonder is a lab-sized autoclave for R&D and limited production.

OEM, INC.

Reciprocating head and cleated pullers for pultrusion, plus standard and wet saws.

POLY-CRAFT SYSTEMS DIV. OF ITW INDUSTRIAL FINISHING

Spray-up systems for reinforced polyester and gelcoat. High-volume, low-pressure (HVLP), airless and air-assisted/airless spray systems use lightweight guns for simplicity and easy maintenance. All spray guns have two catalyst orifices, allowing use of undiluted catalyst. Systems feature Unison precision catalyst slave pump or optional C-400-N catalyzer. Both infinitely variable and totally linear in delivery, with no lead or lag.

Basic Gelcoater has pump with only three reciprocating parts; can support up to 0.031-in. fluid-tip orifice with no "winking" or pulsing.

Modular gelcoat system sprays up to 12 colors; mounted on 7-ft-long wheeled chassis, which is easily moved and eliminates costly in-house plumbing. Components include HVLP G-755 air-assisted/airless gun and C-400-N catalyzer. External-mix gun requires no flushing after use. Supplied for each color is model P-15 pancake 15:1 pump with individual high-pressure filter, air controls, material pick-up assemblies, and quick-disconnect fluid hoses. Central silencer eliminates pump exhaust noise. Each station built as a closed loop with recirculating mode to prevent settling. System uses shop air and can be modified to allow spraying different colors at the same time.

For granite effect, model 205-1000 GranTec gelcoat system can handle up to 60% solids. High filler loadings permitted by automatic recirculation mode, which eliminates clogging of spray nozzles and hoses.

Uni-Roll pressure roller system features the precision Unison Catalyst Slave Ensemble. System is internal-mix with solvent or air purge and has a convenient on/ off run/purge single-lever selector. Pressure roller assembly is lightweight and available with or without a counter-balance boom.

P.S.H. INDUSTRIES, INC.

R-2 spray gun for polyester and epoxy gelcoats and laminating resins is said to eliminate air bubbles and holes in mold making. Gun dispenses from paper or plastic cups.

PULTREX LTD.

Pultrusion machines range from one-ton pulling load and 7 x 2 in. product envelope to 24-ton, 55 x 14 in. envelope. Machines feature servo drives up to four grippers per puller, swivel pendant control, digital controls, integral cutoff saws, ancillary equipment, and pultrusion tooling.

Pullwinding machines used in conjunction with a pultrusion machine place continuous helical wraps into a pultruded profile construction. Standard features include single- (+ winding) or twin-winding heads ([+ or -] winding); independent, fully closed-loop control; online variable, pitch control; die and mandrel location for enhanced accuracy; impregnation system as standard; and fully guarded.

Filament winding machines for general and special purposes available with mechanical drive or up to six axes of CNC control. (Non-axis symmetrical program generation software available.) Machines are modularly designed in sizes to 14-ft diam. x 40 ft long. Tension and rcsin systems, and data logging and process monitoring available.

Low-cost pipe winders in sizes of 600-, 1200- and 2400-ram diam. and lengths of 6000 and 12,000 mm.

RADIO FREQUENCY CO., INC.

RF preheaters and bonders for thermosets include model 671, which increases speeds on pultrusion lines; model L-200, which reduces press cycle times and improves surface characteristics in SMC molding (charges to 80 lb can be preheated in 45 sec.); model L-230 preform preheaters for phenolic and epoxy preforms in compression/transfer molding; and model 5100 thermoset bonders for SMC automotive body panels. Tubes, parts and field service for thermal preform heaters.

RP/C ALLIANCE CORP.

Full service sales and engineering company specializing in adhesive bonding assembly systems for automotive and heavy truck. Services and products offered include:

* Manual or robotic manipulated meter/ mix/dispense systems for multicomponent structural adhesives.

* Precision fixturing for assembly operations.

* Heat-accelerated adhesive curing systems.

* Complete turnkey assembly systems.

RTM SYSTEMS, INC.

RTM equipment includes low-pressure injection machinery for internal meter, mix (Spartan and LPI) and injection of polyester, vinyl ester, phenolic, epoxy, hybrid, etc. Newly introduced low-cost modular injection unit allows full automation.

Full line of mold building supplies and accessories: vacuum generators, clamps, seals, sprues, and sprue plugs.

SANDVIK PROCESS SYSTEMS LLC

Double-belt presses convey resins and reinforcements through a controlled time/temperature/pressure cycle to produce continuous sheet products (fiberglass-reinforced thermoplastic and thermoset laminates, composites, and foams). Products can be up to 56 in. wide. Cure times to 10 min., cure temperatures to 500 F, and line speeds to 90 ft/min. Auxiliaries include loaders, cutting devices, take-up and let-off rolls.

SEALANT EQUIPMENT & ENGINEERING, INC.

Low- to high-volume meter/mix/dispense equipment for epoxy, PUR, silicone, or polyester. From economical, air-powered bench-top unit to Program-A-Bead III units that interface with robots. RTM is a major application.

SIEMPELKAMP LP

Hydraulic presses (single- and multiple-opening) and complete plants (automatic layup, conveying, pressing, trimming, inspection and packaging lines) for high-pressure laminates (decorative, industrial-grade, and copper-clad laminates for printed circuits). Also hydraulic presses for molding of UHMW sheets, and continuous hot/cold presses for flat plastic composite materials.

STRONGWELL

Pulstar automated, modular pultrusion systems with product envelopes from 8 x 6 in. to 40 x 16 in. available either with reciprocating pullers or caterpillar-type pullers. Machine management is provided by touchscreen control pendants and PLCs with custom software.

Die station options include either an open die bed or heated platen type to accommodate multistream production. Cut-off station offers automatic flying cut-off saw with limit switch, digital encoder wheel, or dead-stop provisions. Dual-cut saw station available.

Items for a turnkey system include creel and mat racks, and other materials-handling equipment. Tooling and in-feed systems can be designed and fabricated using both resin bath technology and resin injection technology. Gelstar thermal analyzer can monitor cure conditions on-line inside the die, or performing SPI gel and cure tests.

THERMAL EQUIPMENT CORP. A DOVER DIVERSIFIED CO.

Turnkey autoclave systems monitor part vacuum throughout cure cycle. Computer control system has cycle editor with more than 24 controllable parameters, including part-heat rate, guaranteed soak, exotherm detection, pressure rate, vacuum levels, and alarms.

URETHANE SERVICE, INC.

Plural-component machines for pouring, casting, bead laying, frothing, potting, RIM and RTM.

VERMONT INSTRUMENT CO., INC.

NOL ring winder has controllable overlap and speed. Fixtures for NOL ring testing.

Bench-type laboratory pultruders to make 0.125- to 0.25-in.-diam. rod.