Printer Friendly
The Free Library
23,396,934 articles and books


ReVerb Networks Unveils Intelligent Beamforming Solution at WiMAX World.

rV100i from Smart Antenna Pioneer to Make Cost Effective Broadband a Reality for Networks with Limited Spectrum but High Bandwidth Demands

CHICAGO -- Smart antenna and intelligent beamforming pioneer, ReVerb Networks, unveiled its first beamforming solution, the rV100i today at WiMAX World. The system allows wireless broadband operators to spatially reuse radio frequency spectrum and increase their network capacity, sense and reject interfering signals, and extend their signal reach without costly investment in additional base stations and infrastructure.

The rV100i from ReVerb Networks is an integrated solution that adds beam-forming capability as either an end-to-end system within a WiMAX or Pre-WiMAX network or as a standalone sub-system integrated into the larger network.

The end-to-end system from ReVerb includes

* the rV100i network appliance, software and management interface as well as

* One or more Commercial Off-The-Shelf (COTS) OFDM Base Station Subsystem(s) (BSS)

* Associated remote radio units

* The rV100i active antenna array (replaces the standard antennae included in a conventional system)

"It's our goal to deliver mission-critical wireless broadband data - where it's needed, when it's needed," said Bill Carlin, President and CEO of ReVerb Networks. "The rV100i is designed to achieve this by reusing frequency to increase capacity, providing interference cancellation, and better range and coverage through precise signal control. At the end of the day, our solution is designed to deliver confidence in wireless data communications. Safety and reliability for the users whose lives depend on these high speed networks - that's our priority."

Unlike anything else available, the beamforming capability delivered with the rV100i is simpler and more relevant to Pre-WiMAX current WiMAX applications, allowing the beamforming engine to be applied at the Intermediate Frequency (IF), so that unlike most alternative solutions - the system doesn't have to be integrated into the base station. The result is an increased efficiency and reliability at a much lower cost than adding redundant network nodes for the network operator.

ReVerb's network management system (NMS) software provides a compelling interface for the user. Running on a standard PC the rV100i's interface is fully web-enabled and allows users to graphically set the parameters of their rV100i signal processor and can be customized for the specific network tower location to include Google Maps[TM] visual depictions to show beam locations and patterns. Since network intelligence drives the adaptive beamforming parameters, the network interface displays the effective coverage, shape and bandwidth of each beam. The system controls both the uplink and downlink signal pattern to accommodate frequency selection, spatial location and beam shape. This rich user control with visual awareness combined with real-time diagnostics, ensures the system will perform to the highest capability. For a view of the NMS interface see https://www.virtualpressoffice.com/media/presskit/detail.jsp?show Id=1152106482582&companyId=1190001696046 (Due to its length, this URL may need to be copied/pasted into your Internet browser's address field. Remove the extra space if one exists.)

The adaptive antenna processor within the rV100i uses ReVerb's patented Digital IF beam-forming technology to provide both uplink and downlink signal shaping capability. The product currently interfaces to analog IF coaxial systems and the company will also introduce support for additional radio head interfaces as they evolve, such as OBSAI RP-03.

ReVerb has collaborated extensively with systems integrators and lead customer candidates, and has slated rV100i customer trials and controlled introduction for the first quarter of next year.

About ReVerb Networks

ReVerb Networks is an industry pioneer and leader in smart antenna technology. The company's patented beam-forming software is revolutionary in bringing new capabilities to wireless networks, as both an overlay optimization engine and as a set of integrated product solutions. Based in Virginia, ReVerb Networks is privately funded. More information on the company can be found at www.reverbnetworks.com

Media and Analyst Inquiries and to arrange onsite interviews contact Rick Cuthill, VP Product Management, (e) rcuthill@reverbnetworks.com (m) 1-571-435-2764
COPYRIGHT 2007 Business Wire
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2007, Gale Group. All rights reserved.

 Reader Opinion

Title:

Comment:



 

Article Details
Printer friendly Cite/link Email Feedback
Publication:Business Wire
Date:Sep 25, 2007
Words:641
Previous Article:TheNextRound Ranked Number 9 in Deloitte's Technology Fast 50 Program for New England.
Next Article:Jackson(SM) Enhances Fixed Index Annuity Product Menu with Launch of Jackson AscenderPlus Select(SM).
Topics:



Related Articles
Aircraft News - Africa / Middle East.
Company Watch - Etihad Airways.
GCT Semiconductor Announces Sampling of the Industry's First Mobile WiMAX IEEE 802.16e Wave 2 Compliant 2.5 GHz Monolithic Single-Chip Solution.
Freescale Introduces World's First Multi-Stage RFICs Optimized for 2.7 and 3.5 GHz WiMAX Base Station Power Amplifiers.
WiChorus and Aperto Announce Successful Completion of Interoperability Testing between WiChorus' Intelligent ASN Gateway with Aperto's PacketMAX Base...
TRADE NEWS: Agilent Technologies Showcases Powerful Fixed, Mobile WiMAX(TM) Test Solutions at WiMAX World 2007.
ZyXEL Unveils New WIMAX Base Station Series; Arms Service Providers with End-to-End IEEE802.16e Solutions.
ZyXEL Communications Wins Best of WiMAX World Award for System Design.
Analog Devices Introduces RF Transceivers for Mobile WiMAX Applications.
NTT DoCoMo Provides Mobile Solution to Expand Overseas i-mode Handsets.

Terms of use | Copyright © 2014 Farlex, Inc. | Feedback | For webmasters