Printer Friendly
The Free Library
23,403,340 articles and books


RITA Corp. develops sunless tanning lotion.

Here are product formulas supplied by producers of raw materials.

* Included in some instances are sources of supply for the raw materials and instructions for preparation and use of the finished product.

No guarantee of performance or safety is implied Happi.

* For more complete details readers should contact the suppliers directly using the telephone number or website provided with each formula.

If your company has a formula that you think would be of interest to readers of Happi: marketers of soaps & detergents; cosmetics & toiletries; waxes & polishes; disinfectants & sanitizers and other chemical specialties, we will be pleased to consider it for publication. Address all material to:

Formulary Editor

Happi 70 Hilltop Rd. Ramsey, NJ 07446 USA
Sunless Tanning Lotion

INGREDIENTS: % WT.

Distilled Water 84.70
Viscolam AT 100P (RITA) 5.00
 (sodium acrylate/sodium acryloyl-
 dimethyl taurate copolymer (and)
 hydrogenated polydecene (and)
 trideceth-10)
Ritadecene 20 (RITA) 10.00
 (hydrogenated polydecene)
Ritaphyl ICS (RITA) 3.00
 (isocetyl stearate)
Biotanning (RITA) 3.00
 (hydrolyzed citrus aurantium
 dulcis fruit extract)
Patlac LA (RITA) q.s.
 (lactic acid)
Dihydroxyacetone 1.00
Propylene glycol USP 1.00
Methylparaben NF 0.20
Propylparaben NF 0.10
Preservative, perfume q.s.

PROCEDURE:

Combine distilled water and Viscolam AT 100P;
mix until uniform. Combine Patlac LA,
dihydroxyacetone and propylene glycol; heat
slightly and mix until dissolved; add to the batch.
Add Ritadecene 20. Adjust pH with Ritaphyl ICS
to pH 3.5-4.0. Add Biotanning and mix well.

MORE INFO:
RITA Corp., P.O. Box 1487, Woodstock, IL 60098
Phone: (815) 337-2500; Fax: (815) 337-2522
E-mail: cservice@ritacorp.com;
Website: www.ritacorp.com

Clear Liquid Makeup Remover

INGREDIENTS: % WT.

Miranol Ultra C32 (Rhodia) 5.00
 (sodium cocoamphoacetate)
Mirapol A15 (Rhodia) 1.00
 (polyquaternium-2)
Jaguar C162 (Rhodia) 0.50
 (hydroxypropyl guar (and)
 hydroxypopyltrimonium chloride)
Verveine HS (Croda) 2.00
 (verbena officinalis extract)
Preservative q.s.
Perfume 0.05
Deionized water to 100

PROCEDURE:

Disperse Jaguar C162 in a blend of water,
preservative and Mirapol A15. Add Miranol Ultra
C32, verbena extract and perfume. Adjust pH to
6.

PROPERTIES:

Appearance: clear, slightly yellow liquid
pH (as is): 6
Active surfactant: 1.6%

MORE INFO:

Rhodia Home, Personal Care & Industrial Ingredients,
259 Prospect Plains Road, Cranbury, NJ 08512 Phone:
(609) 860-4000; Fax: (609) 860-0075 Website: www.hpcii.
rhodia.com

Light Styling and Detangling Mist

INGREDIENTS: % WT.

Styleze W-10 (ISP) 2.0
 (polyquaternium-55)
Tween 60 (Unigema) 2.0
 (polysorbate 60)
Purester 24 (Strahl & Pitsch) 1.0
 (lauryl laurate)
Monamid 150 ADY (Uniqema) 1.0
 (linoleamide DEA)
Propylene glycol 0.2
 (isopropyl alcohol)
Germall Plus (ISP) 0.5
 (diazolidinyl urea (and) iodoproynl
 butylcarbamate)
Water q.s.

PROCEDURE:

Dissolve Purester 24 in Monamid 150 ADY by
eating to 50[degrees]C and combine with Tween 60.
Add Styleze and propylene glycol to water and
stir in the Purester mixture. Mix thoroughly and
add Germall plus while mixing. Continue mixing
until the product comes to room temperature.

MORE INFO: Strahl & Pitsch Inc., 230 Great East Neck Rd.,
West Babylon, NY 11704 Tel: (631) 587-9000, Fax. (631)
587-9120; Website: www.spwax.com

Elegant Body Butter

INGREDIENTS: % WT.

Phase A

Ozokerite Wax White SP 1020 4.00
 (Strahl & Pitsch) (ozokerite)
Spermaceti Wax Substitute No. 573 4.00
 (Frank B. Ross) (cetyl ester)
Beeswax Yellow Refined (Frank B. Ross) 3.00
 (beeswax)
Petrolatum Penreco Snow (Penreco) 18.00
 (petrolatum)
Emulsynt GDL (ISP) 15.00
 (glyceryl dilaurate)
Prolipid 141 (ISP) 2.00
 (glyceryl stearate (and) behenyl alcohol
 (and) palmitic acid (and) stearic acid
 (and) lecithin (and) lauryl alcohol (and)
 myristyl alcohol (and) cetyl alcohol)
Cetiol SB-45 (Cognis) 2.50
 (shea butter)
Fancol CB (Fanning Corp.) 1.50
 (theobroma cacao (cocoa) seed butter)
Ceraphyl 375 (ISP) 20.00
 (isostearyl neopentanoate)
Ceraphyl 368 (ISP) 11.30
 (ethylhexyl palmitate)
Ceraphyl 424 (ISP) 10.00
 (myristyl myristate)
Ceraphyl 41 (ISP) 3.50
 ([C.sub.12-15] alkyl lactate)
Ceraphyl 230 (ISP) 1.50
 (diisopropyl adipate)

Phase B

Liquapar Oil (ISP) 0.60
 (isopropylparaben (and) isobutylparaben
 (and) butylparaben
Orchid Complex OS (ISP) 2.50
 (caprylic/capric triglyceride (and)
 cymbidum grandiflorum flower extract)
Night Blooming Orchid (Ungerer) 0.50
 (fragrance)
Vitamin E Acetate (Tri-K) 0.10
 (tocopheryl acetate)

PROCEDURE:

Combine all ingredients in phase A and heat to
80-85[degrees]C. Mix well. Cool to 55[degrees]C;
add phase B ingredients in order listed. Pour at
50[degrees]C.

MORE INFO:
ISP, 1361 Alps Road, Wayne, NJ 07470
Tel: (973) 628-4800; Fax: (973) 628-4067;
Website: www.ispcorp.com

Conditioning Styling Gel

INGREDIENTS: % WT.

Phase A
Deionized water 50.00
Amaze XT (National Starch) 1.00
 (dehydroxanthan gum)

Phase B
Deionized water 44.80
Celquat H-100 (National Starch) 0.15
 (polyquaternium-4)

Phase C
Propylene glycol 2.00
DL-Panthenol (Roche) 0.50
 (panthenol)
Disodium EDTA 0.50
Cropeptide W (Croda) 1.00
 (hydrolyzed wheat protein (and)
 hydrolyzed wheat starch)
DC 193 (Dow Corning) 0.20
 (PEG-12 dimethicone)
Glydant Plus Granular (Lonza) 0.30
 (DMDM hydantoin (and) iodopropynyl
 butylcarbamate)

PROCEDURE:

Dust Amaze XT into the water in phase A and
mix until completely hydrated. Separately,
combine the ingredients of phase B and mix
until dissolved. Add phase B to phase A with
good agitation. Add remaining ingredients and
mix until uniform.

PROPERTIES:

Viscosity: 29,000 cps (Brookfield DV-I,
 spindle #6 @10rpm; 23[degrees]C)

MORE INFO:
National Starch Personal Care, 10 Finderne Avenue,
Bridgewater, NJ 08807, Phone: (888) 331-6212; Fax:
(908) 707-3664 Email: persornalcare.usa@nstarch.com;
Website: www.nationalstarch.com

Calming Wipes

INGREDIENTS: % WT.

Phase A
Water q.s. to 100
Simulgel NS (Seppic) 0.60
 (hydroxyethylacrylate/sodium
 acryloyldimethyl taurate copolymer
 (and) squalane (and) polysorbate 60)

Phase B
Isopropyl palmitate 5.00
Mineral oil 5.00

Phase C
Sepicide WP1 (Seppic) 3.65
 (propylene glycol (and) phenoxyethanol
 (and) methylparaben (and) ethylparaben
 (and) butylparaben (and) propylparaben
 (and) isopropylparaben)
Sepicalm VG (Seppic) 0.50
 (sodium palmitoyl proline (and)
 nymphaea alba flower extract)
Tocopheryl acetate 0.10
Fragrance 0.10

PROCEDURE:

Swell Simugel NS into water, then add oils
(phase B) and additives (phase C) succes-
sively.

PROPERTIES:

Appearance: opaque lotion
pH: -6
Viscosity: 200 mPa.s Brookfield LV 6rpm
Stability: >M6 ambiant temperature-->M1
40->1W 50[degrees]C

MORE INFO:
Seppic, 30 Two Bridges Rd., Suite 210, Fairfield,
NJ 07004 Tel: (973) 882-5597; Fax: (973) 882-5178;
Website: www.seppic.com

Gravity-Defying Styling Putty

INGREDIENTS: % WT.

Phase A
Deionized water 60.65
Carbopol 980 Polymer (Noveon) 0.70
 (carbomer)

Phase B
Deionized water 10.00
Mearlmaid AA (Engelhard) 0.10
 (water (and) guanine (and) isopropyl
 alcohol (and) methylcellulose)
Fixate G-100 Polymer (Noveon) 1.80
 (AMP-acrylates/allyl methacrylate
 copolymer 26%)
Merquat Plus 3330 (Ondeo Nalco) 0.50
 (polyquaternium-39)
AMP-95 (Dow) 0.35 (q.s.)
 (aminomethyl propanol)
Glydant (Lonza) 0.20
 (DMDM hydantoin)

Phase C
Polyox WSR-301 (Dow) 0.70
 (PEG-90M)
Propylene glycol 5.00
Deionized water 20.00

PROCEDURE:

Disperse Carbopol 980 polymer into deionized water with vigorous
agitation. In separate beaker, mix deionized water and Mearlmaid.
Mix well until all colorant is evenly dispersed. Add to phase A.
Add Fixate G-100 Polymer and mix until uniform. Add Merquat Plus
3330 and mix until uniform (this will cause the gel to haze).
Neutralize with AMP-95. Add Glydant and mix until homogeneous.
Pre-combine Polyox WSR-301 and propylene glycol in separate vessel
with good mixing. Add deionized water and continue mixing. Add to
main vessel. Increase agitation. Note: (This mixture is very stringy
and sticky.) If necessary, adjust final pH to 6.0 with AMP-95.

PROPERTIES:

Apperance: stretchable, stringy pearlescent
 gel
pH: 5.8-6.3
Viscosity, initial (mPa.s): 21,000-31,000
Clarity (%T): 60-70
Stability (in process): passed 2 months at 45[degrees]C;
 passed 5 cycles freeze/thaw
High humidity curl retention: 88% of original
 curl after 8 hours; >70% of original curl
 after 24 hours

MORE INFO:
Noveon Inc., 9911 Brecksville Rd., Cleveland,
OH 44141-3247 Tel: (800) 379-5389 or (216)
447-5000 Website: www.carbopol.com or
www.personalcare.noveoninc.com

Body Splash

INGREDIENTS: % WT.

Phase A
Crodamol STS (Croda) 10.00
 (PPG-3 benzyl myristate)
Deionized water 14.00
Butylene glycol 1.00

Phase B
SD alcohol 40 75.00
Fragrance q.s.


PROCEDURE:

Combine ingredients of phase A and phase B separately, then add phase B to phase A, mixing well.

MORE INFO: Croda Inc., 7 Century Dr., Parsippany, NJ 07054-4698 Tel: (973) 644-4900; Fax: (979) 644-9222; Website: www.croda.com
COPYRIGHT 2003 Rodman Publications, Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2003 Gale, Cengage Learning. All rights reserved.

 Reader Opinion

Title:

Comment:



 

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:Formulary
Publication:Household & Personal Products Industry
Date:Nov 1, 2003
Words:1371
Previous Article:Facial hair survey reveals that less is more.
Next Article:Attendees run with a new idea at run/walk in Milan.

Terms of use | Copyright © 2014 Farlex, Inc. | Feedback | For webmasters