Purging agents: just a pinch will do.Fast purging Purging The use of vomiting, diuretics, or laxatives to clear the stomach and intestines after a binge. Mentioned in: Anorexia Nervosa purging (purj´ing), n of screws, barrels, and nozzles is reportedly possible with small amounts of chemical purging compounds newly available in North America North America, third largest continent (1990 est. pop. 365,000,000), c.9,400,000 sq mi (24,346,000 sq km), the northern of the two continents of the Western Hemisphere. from Chem-Trend, Howell, Mich. Lusin Clean compounds are said to have a proven history of purging injection, extrusion, and blow molding machines (Woodworking) A planing machine for making moldings (Founding) A machine to assist in making molds for castings. See also: Molding Molding in Europe. These granular granular /gran·u·lar/ (gran´u-lar) made up of or marked by presence of granules or grains. gran·u·lar adj. 1. Composed or appearing to be composed of granules or grains. 2. , low-odor, low-smoke compounds contain neither fillers nor abrasives, which reportedly makes them particularly well suited to cleaning hot-runner systems, regardless of gate size. In fact, the newest members of this line, grades G315 and G320, are designed specifically for injection machines and hot runners A hot runner is an injection mold component containing a series of channels that distributes molten plastic within a mold to increase molding productivity through reduced waste, as the runners arent wasted each cycle by being ejected, as the plasic stays molten and gets used on the . G315 is tailored for purging polyolefins and has an operating temperature range of 338 to 599 F. Typical use level would range from 18 lb for a 60-mm screw to 46 lb for a 160-mm screw. G320 is recommended for purging a wide range of engineering thermoplastics as well as polyolefins. It can handle operating temperatures of 356 to 606 F and is specially adapted for cleaning large machines. Expected usage rate ranges from 3 lb for a 60-mm screw to 33 lb for a 140-mm screw. Tel: (800) 727-7730 * PT Direct: 769WB |
|
||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion