Process aid lubricant.Difficulty in releasing polycarbonate A category of plastic materials used to make a myriad of products, including CDs and CD-ROMs. is said to often prompt injection molders to use an external mold release. Unfortunately, polycarbonate is said to be particularly moisture and solvent sensitive, so these products may cause cracking or crazing. The company recommends the use of its proprietary process aid additive lubricant, MoldWiz INT-33-UDK. The 100% active pellets can simply be tumbled into the resin before or after drying, or can be metered directly into the resin stream, according to according to prep. 1. As stated or indicated by; on the authority of: according to historians. 2. In keeping with: according to instructions. 3. the company. Using a resin additive is said to be far faster than stopping the molding cycle to spray the mold cavities, and there is no risk of surface blemishes on molded parts, problems that can often occur when mold release sprays are used, according to the company. MoldWiz INT-33UDK UDK Umweltdatenkatalog UDK User Defined Key UDK Universal Developer's Kit UDK Universaliosios Dešimtaines Klasifikacijos (Lithuania) UDK Unixware Development Kit UDK Universal Development Kit is a proprietary synergistic blend of organic fatty acids, esters esters (esˑ·terz), n.pl organic compounds synthesized from acids and alcohols, typically possessing fruity aromas. and amides. The product is generally effective at a loading of 0.3% based on weight, and is suitable for use in blends. Axel Axel: see Absalon. Plastics Research Laboratories Circle 12 on card [ILLUSTRATION OMITTED] |
|
||||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion