Process aid additive used for high impact TPOs.The proprietary process aid additive, MoldWiz INT-33PAS, is designed specifically for molding high impact and soft touch thermoplastic A polymer material that turns to liquid when heated and becomes solid when cooled. There are more than 40 types of thermoplastics, including acrylic, polypropylene, polycarbonate and polyethylene. polyolefin (TPO (Twisted Pair Only) Refers to the use of twisted pair wire when other options are available. For example, a TPO suffix at the end of 3com Ethernet adapter model numbers indicates the card has only an RJ45 connector. ) resins. The product is said to provide excellent release of parts from mold cavities, while leaving parts residue-free. This product was developed expressly to address post-mold fogging that can occur when volatile additives leach to the surface of finished parts over time. This is said to be of special concern in the automotive industry The automotive industry is the industry involved in the design, development, manufacture, marketing, and sale of motor vehicles. In 2006, more than 69 million motor vehicles, including cars and commercial vehicles were produced worldwide. , particularly when molded-in color is increasingly being used to replace paint or foil treatment. High impact, soft touch TPO can be difficult to release from mold cavities, according to according to prep. 1. As stated or indicated by; on the authority of: according to historians. 2. In keeping with: according to instructions. 3. the company. INT-33PAS is said to be designed to provide customers with excellent mold release properties, while assuring them that consistent color and surface finish can be maintained throughout the life cycle of their molded products. MoldWiz INT-33PAS is a complex formulation of saturated and unsaturated unsaturated /un·sat·u·rat·ed/ (un-sach´ur-at?ed) 1. not holding all of a solute which can be held in solution by the solvent. 2. denoting compounds in which two or more atoms are united by double or triple bonds. fatty esters and organic acid derivatives, according to the company. The product is offered as either a free flowing powder or a 100% active pellet. The customary loading level is 0.3% based on weight. The company provides a technical network of stocking distributors. Axel Plastics Research Laboratories Circle 38 on card |
|
||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion