Portable mold coolers. (Metalcasting Supplies).Portable Evaporative evaporative pertaining to evaporation. evaporative loss loss of body water by evaporation of water from the body to the air; a heat control mechanism and a factor in water balance studies. Coolers by Bessam-Aire, Inc., can be used to air - cool permanent molds. The coolers typically reduce 95F (35C) air to 80F (27C) with a 74% relative humidity relative humidity n. The ratio of the amount of water vapor in the air at a specific temperature to the maximum amount that the air could hold at that temperature, expressed as a percentage. . The processed air is discharged at 720 fpm to expedite heat transfer from the mold. Because the mold cools more gradually than watercooled molds, a longer service life can be expected. The outlet grille can be configured to increase the outlet velocity by reducing the outlet area. Units are built of galvanized gal·va·nize tr.v. gal·va·nized, gal·va·niz·ing, gal·va·niz·es 1. To stimulate or shock with an electric current. 2. steel. Each unit requires a 115/1/60 electrical receptacle and a garden hose water supply (unit has 0.75-in, float valve a valve or cock acted upon by a float. See Float, 1 See also: Float water connection). The coolers are available in 5000, 10,000 and 20,000 cfm sizes. Bessam-Aire, Inc. Circle No. 016 on last page. |
|
||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion