Printer Friendly

Browse Polymeric composites topic

 

Articles

1-300 out of 500 article(s) nextnext page
Title Author Type Date Words
Effects of THF as cosolvent in the preparation of polydimethylsiloxane/polyethersulfone membrane for gas separation. Kamal, Siti Nadiah Mustafa; Leo, Choe Peng; Ahmad, Abdul Latif; Junaidi, Mohd Usman Mohd Report Sep 1, 2014 5302
Shear-induced shish-kebab structures in isotactic polypropylene using acicular precipitated calcium carbonate as whisker. Vogel, Roland; Boldt, Regine; Vucak, Marijan; Haussler, Liane Report Sep 1, 2014 3400
Experimental and numerical investigation of fracture of abs polymeric material for different sample's thickness using a new loading device. Oskui, Abuzar Es'hagi; Choupani, Naghdali; Haddadi, Elyas Report Sep 1, 2014 6008
Thermal birefringence in freely quenched multilayered slabs of amorphous polymers: experiment and simulation. Kim, Nam Hyung; Isayev, Avraam I. Report Sep 1, 2014 10363
Blends of high density polyethylene and poly(L-lactic acid): mechanical and thermal properties. Madhu, Gaurav; Bhunia, Haripada; Bajpai, Pramod K. Report Sep 1, 2014 2899
Coupled thermal-electrical analysis of carbon nanotube/epoxy composites. Prolongo, S.G.; Del Rosario, G.; Urena, A. Report Sep 1, 2014 3444
Effect of core-shell zinc hydroxystannate nanoparticle-organic macromolecule composite flame retardant prepared by masterbatch method on flame-retardant behavior and mechanical properties of flexible poly(vinyl chloride). Li, Zhi-Wei; Shao, Bing; Huang, Yong-Shan; Li, Xiao-Hong; Zhang, Zhi-Jun Report Sep 1, 2014 3749
Sources of irreversibilities in a perfectly axisymmetric geometry at low Reynolds numbers. Loux, C.; Bouchet, G.; Bouquey, M.; Muller, R. Report Sep 1, 2014 6132
Crystallization of polycarbonate in solvent/nonsolvent system and its application to high-density polyethylene composite as a filler. Hwang, Duck Kun; Lee, Heon Sang; Kim, Hyun Jong; Shul, Yong Gun; Oh, Kyeongseok Report Aug 1, 2014 3283
Polyethylene-based nanocomposite films: structure/properties relationship. Martini, Raquel E.; La Tegola, Simone; Terenzi, Andrea; Kenny, Jose M.; Barbosa, Silvia E. Report Aug 1, 2014 5049
Experimental and numerical studies on bubble dynamics in nonpressurized foaming systems. Emami, Maryam; Thompson, Michael R.; Vlachopoulos, John Report Aug 1, 2014 7065
Effect of water-assisted extrusion and solid-state polymerization on the microstructure of pet/clay nanocomposites. Dini, Maryam; Mousavand, Tahereh; Carreau, Pierre J.; Kama, Musa R.; Ton-That, Minh-Tan Report Aug 1, 2014 7657
Effect of electron beam irradiation dose on the rheology, morphology, and thermal properties of branched polypropylene/polybutene-1 blend. Ardakani, Farzaneh; Jahani, Yousef; Morshedian, Jalil Report Aug 1, 2014 5190
Comparison of different processing methods to prepare poly(lactid acid)-hydrotalcite composites. Scaffaro, R.; Botta, L.; Passaglia, E.; Oberhauser, W.; Frediani, M.; Di Landro, L. Report Aug 1, 2014 3750
Investigation of current-voltage characteristics and current conduction mechanisms in composites of polyvinyl alcohol and bismuth oxide. Yildirim, Mert; Gokcen, Muharrem; Tunc, Tuncay; Uslu, Ibrahim; Altindal, Semsettin Report Aug 1, 2014 3763
A polycaprolactone-based compatibilization treatment to improve dispersion and interphase structure of silica polyurethane composites. Chiacchiarelli, Leonel Matias; Monsalve, Leandro; Vazquez, Analia; Kenny, Jose M.; Torre, Luigi Report Aug 1, 2014 7346
The role of flow-induced microstructure in rheological behavior and nonisothermal crystallization kinetics of polyethylene/organoclay nanocomposites. Nazari, Behzad; Nazockdast, Hossein; Katbab, Ali Asghar Report Aug 1, 2014 4558
The terpolymer of neodymium-catalyzed styrene, isoprene, and butadiene: efficient synthesis of integral rubber containing atactic styrene-styrene sequences and high Cis-1,4 polyconjugated olefins. Xu, Qiang; Li, Li; Guo, Fang; Shi, Zhenghai; Ma, Hongwei; Wang, Yanshai; Wang, Yurong; Li, Yang Report Aug 1, 2014 3869
Morphological, thermal, and mechanical properties of poly(vinyl chloride)/acrylonitrile butadiene rubber blend using CuS[O.sub.4] x 5[H.sub.2]O cross-linking agent. Liu, Hai; Wang, Jie; Wen, Sheng; Dong, Lijie; Xiong, Chuanxi; Yao, Junlong Report Aug 1, 2014 4808
Microstructure and properties of poly(ethylene terephthalate)/organoclay nanocomposites prepared by water-assisted extrusion: effect of organoclay concentration. Dini, Maryam; Mousavand, Tahereh; Carreau, Pierre J.; Kamal, Musa R.; Ton-That, Minh-Tan Report Aug 1, 2014 7740
Effect of friction and wear parameters on acrylonitrile butadiene styrene/aluminum-boron carbide-glass spheres polymer composites/Trinities ir dilimo parametru itaka akronitrilo butadieno styreno/aliuminio boro karbido-sferinio stiklo polimeru kompozitams. Tasdemir, Munir; Babat, Volkan; Yerlesen, Umut Report Jul 1, 2014 3548
Strengthening composites with waste rubber: coated rubber particles plus process optimization equals impact-modified polymer composites. Kakroodi, Adel Ramezani; Rodrigue, Denis Jul 1, 2014 1193
Composite yarns fabricated from continuous needleless electrospun nanofibers. Niu, Haitao; Gao, Weimin; Lin, Tong; Wang, Xungai; Kong, Lingxue Report Jul 1, 2014 3894
Novel amphiphilic conetworks based on compatibilized nbr/sbr-montmorillonite nanovulcanizates as membranes for dehydrative pervaporation of water-butanol mixtures. Essawy, Hisham; Tawfik, Magda; El-Sabbagh, Salwa; El-Gendi, Ayman; El-Zanati, Elham; Abdallah, Heba Report Jul 1, 2014 5657
Ultrafast preparation of branched poly(methyl acrylate) through single electron transfer living radical polymerization at room temperature. Li, Fang; Xue, Xiaoqiang; Huang, Wenyan; Yang, Hongjun; Jiang, Bibiao; Zheng, Yiliang; Zhang, Dongli Report Jul 1, 2014 3351
Application of response surface methodology for modeling of reactive dye removal from solution using starch-montmorillonite/polyaniline nanocomposite. Olad, Ali; Azhar, Fahimeh Farshi; Shargh, Maryam; Jharfi, Sanaz Report Jul 1, 2014 8012
Mechanical and electrical properties of the PA6/SWNTs nanofiber yarn by electrospinning. Li, Jie; Tian, Long; Pan, Ning; Pan, Zhi-juan Report Jul 1, 2014 3801
Preparation of stimuli-responsive nanogels of poly [2-(dimethylamino) ethyl methacrylate] by heterophase and microemulsion polymerization using gamma radiation. Melendez-Ortiz, Hector Ivan; Peralta, Rene D.; Bucio, Emilio; Zerrweck-Maldonado, Laura Report Jul 1, 2014 3609
Polysulfone-polyaniline-type membranes obtained in a steady-state system: structural and hydrodynamic characteristics. Batrinescu, Gheorghe; Constantin, Mirela Alina; Cuciureanu, Adriana; Nechifor, Gheorghe Report Jul 1, 2014 3505
Synthesis and characterization of the new pyridine-containing poly(azomethine-urethane)s: the effect of methyl substituent as electron-donating group on some physical properties. Kamaci, Musa; Kaya, Ismet Report Jul 1, 2014 4560
Preparation and characterization of liquid crystalline polyurethane-imide modified epoxy resin composites. Gui, Dayong; Gao, Xue; Hao, Jingfeng; Liu, Jianhong Report Jul 1, 2014 3570
Properties and performance of a simulated consumer polymer waste--coal combustion byproduct composite material. Potgieter, Herman; Liauw, Christopher; Velado, David Report Jun 1, 2014 4074
Antifungal properties and material characteristics of PVC and wood/PVC composites doped with carbamate-based fungicides. Kositchaiyong, Apisit; Rosarpitak, Vichai; Sombatsompop, Narongrit Report Jun 1, 2014 6586
Mechanical and flame resistant properties of polycarbonate-carbon nanotubes-ochre composites. Moon, Sung Cheal; Kim, Jeong Yeol; Oh, Bong Taek Report Jun 1, 2014 4948
Anomalous first normal stress difference behavior of polymer nanocomposites and liquid crystalline polymer composites. Narimissa, Esmaeil; Rahman, Ahmed; Gupta, Rahul K.; Kao, Nhol; Bhattacharya, Sati N. Report Jun 1, 2014 9157
Morphological factors affecting the permeation resistance of nanocomposite blend films. Bhuva, Nihir A.; Goettler, Lloyd A. Report Jun 1, 2014 5344
Online monitoring of diallyldimethylammonium chloride polymerization. Akyuz, Ali; Buyukunsal, Gulsen; Paril, Ahmet Report Jun 1, 2014 3302
Effects of eccentricity, temperature, velocity, and polymer properties on solids compressibility in vane extruder. Qu, Jin-Ping; Xu, Yi-She; Chen, Jia-Jia; Zhang, Gui-Zhen; Zhang, Ning Report Jun 1, 2014 4861
Preparation and properties of TPU micro/nanofibers by a laser melt-electrospinning system. Li, Xiuyan; Wang, Zhe; Wang, Jiaona; Liu, Jianli; Li, Congju Report Jun 1, 2014 3090
Bentonite as a reinforcing and compatibilizing filler for natural rubber and polystyrene blends in latex stage. Ruamcharoen, Jareerat; Ratana, Tanakorn; Ruamcharoen, Polphat Report Jun 1, 2014 4212
Dispersive mixing efficiency of an elongational flow mixer on PP/EPDM blends: morphological analysis and correlation with viscoelastic properties. Rondin, Jerome; Bouquey, Michel; Muller, Rene; Serra, Christophe A.; Martin, Gregory; Sonntag, Phili Report Jun 1, 2014 7924
Characterization of microinjection molding process for milligram polymer microparts. Zhang, Nan; Gilchrist, Michael D. Report Jun 1, 2014 7577
A plastic/composite car in every driveway? Jun 1, 2014 1085
Preparation and physical properties of an epoxy nanocomposite with amine-functionalized graphenes. Park, Solmon; Kim, Dae Su Report May 1, 2014 3949
Injection-molded porous hydroxyapatite/polyamide-66 scaffold for bone repair and investigations on the experimental conditions. Zhou, Song; Li, Yu-Bao; Wang, Yan-Ying; Zuo, Yi; Gao, Shi-Bo; Zhang, Li Report May 1, 2014 7039
Properties of softwood polymer composites impregnated with nanoparticles and melamine formaldehyde furfuryl alcohol copolymer. Hazarika, Ankita; Maji, Tarun K. Report May 1, 2014 7679
Rheological properties of bitumen modified with ethylene butylacrylate glycidylmethacrylate. Bulatovic, Vesna Ocelic; Rek, Vesna; Markovic, Josipa Report May 1, 2014 5962
Constant-temperature embossing of supercooled polymer films. Thanumoorthy, Ramasubramani Kuduva Raman; Kim, Byung H.; Yao, Donggang Report May 1, 2014 5093
Morphology and properties of renewable poly(3-hydroxybutyrate-co-3-hydroxyvalerate) blends with thermoplastic polyurethane. Wang, Shichao; Xiang, Hengxue; Wang, Renlin; Peng, Cheng; Zhou, Zhe; Zhu, Meifang Report May 1, 2014 3329
Optical and electrochemical properties of thermostable polymers containing light-emitting units. Damaceanu, Mariana-Dana; Jarzabek, Bozena; Bruma, Maria Report May 1, 2014 4837
Evidence of two mobile amorphous phases in semicrystalline polylactide observed from calorimetric investigations. Delpouve, Nicolas; Arnoult, Mickael; Saiter, Allisson; Dargent, Eric; Saiter, Jean-Marc Report May 1, 2014 5003
Synthesis and characterization of sequential interpenetrating polymer networks of polyurethane acrylate and polybenzoxazine. Okhawilai, Manunya; Pudhom, Kasiphat; Rimdusit, Sarawut Report May 1, 2014 6522
Effect of the particle size of expandable graphite on the thermal stability, flammability, and mechanical properties of high-density polyethylene/ethylene vinyl-acetate/expandable graphite composites. Sun, Zhidan; Ma, Yonghong; Xu, Yang; Chen, Xiaolang; Chen, Man; Yu, Jie; Hu, Shuchun; Zhang, Zhibin Report May 1, 2014 4492
Bubble nucleation in nonpressurized polymer foaming systems. Emami, Maryam; Thompson, Michael R.; Vlachopoulos, John Report May 1, 2014 5914
Production of core-shell polymer particles-containing cardanol by semibatch combined suspension/emulsion polymerization. Besteti, Marina D.; Souza, Fernando G., Jr.; Freire, Denise M.G.; Pinto, Jose Carlos Report May 1, 2014 4918
Nanocomposite holograms. Corneliussen, Roger Brief article May 1, 2014 173
Global Wood-Plastic Composites Market 2014-2018: Demand for Wood-Plastic Composites from the Housing Industry is One of the Major Drivers. Apr 29, 2014 792
Global Wood-Plastic Composites Market 2014-2018: Demand for Wood-Plastic Composites from the Housing Industry is One of the Major Drivers. Apr 29, 2014 786
Nonflammable materials. Corneliussen, Roger Brief article Apr 1, 2014 102
Degradable materials. Corneliussen, Roger Brief article Apr 1, 2014 148
Polyamide 6-cellulose composites: effect of cellulose composition on melt rheology and crystallization behavior. Report Apr 1, 2014 5977
Curing, gelling, thermomechanical, and thermal decomposition behaviors of anhydride-cured epoxy (dgeba)/epoxidized soybean oil compositions. Report Apr 1, 2014 5292
Synergistic flame retardant effects of ammonium polyphosphate in ethylene-vinyl acetate/layered double hydroxides composites. Report Apr 1, 2014 5729
Positron annihilation lifetime spectroscopy for miscibility investigations of styrene-butadiene-styrene copolymer/polystyrene blends. Report Apr 1, 2014 3974
Structural Analysis and Dielectric Property of Novel Conjugated Polycyanurates. Zhao, Xiong-Yan; Wang, Ming-Zhu; Ji, Jiao-Qing; Wang, Tian-Heng; Yang, Fei; Du, Juan-Min Report Apr 1, 2014 3530
Improvement of Blown Film Extrusion of Poly(Lactic Acid): Structure-Processing-Properties Relationships. Mallet, Benoit; Lamnawar, Khalid; Maazouz, Abderrahim Report Apr 1, 2014 11040
Morphology and Properties of Highly Filled iPP/[Ti0/sub.2] Nanocomposites. Zohrevand, Ahmad; Ajji,Abdellah; Frej, Mighri Report Apr 1, 2014 9109
Cure Characterization of Cycom 977-2A Carbon/Epoxy Composites for Quickstep Processing. Khan, Laraib A.; Kausary, Ayesha; Hussain, Syed Tajammul; Iqbal, Zafar; J. Day, Richard; Syed, Ahmed Report Apr 1, 2014 6512
Poly(L-lactide)/Poly(D-lactide)/Clay Nanocomposites Enhanced Dispersion, Crystallization, Mechanical Properties, and Hydrolytic Degradation. Li, Yi; Han, Changyu; Zhang, Xin; Xu, Kun; Bian, Junjia; Dong, Lisong Report Apr 1, 2014 6509
Static and Dynamic Compressive Properties of Polypropylene/Zinc Oxide Nanocomposites. Omar, Mohd Firdaus; Akil, Hazizan Md; Ahmad, Zainal Arifin; Mahmud, Shahrom Report Apr 1, 2014 6454
Evaluation of grooving method to postpone debonding of FRP laminates in WPC-FRP beams. Arefi, Shahin Lale; Naghipour, Morteza; Turskis, Zenonas; Nematzadeh, Mehdi Report Apr 1, 2014 5014
Ethanol purification using polyamide-carbon nanotube composite membranes. Marjani, Azam Report Apr 1, 2014 3719
Effects of an aminosilane and a tetra-functional epoxy on the physical properties of di-functional epoxy/graphene nanoplatelets nanocomposites. Park, Jun Ki; Kim, Dae Su Report Apr 1, 2014 3874
Thermal conductivities of electrospun polyimide-mesophase pitch nanofibers and mats. Yan, Han; Mahanta, Nayandeep K.; Majerus, Laurent J.; Abramson, Alexis R.; Cakmak, Miko Report Apr 1, 2014 3493
Study of chemical and thermal properties of kenaf biomass-basedpolylactic acid (PLA). Nasir, Nur Aimi Mohd; Anuar, Hazleen; Mel, Maizirwan; Othman, Rashidi; Seeni, Nurhafizah; Ithnin, Ah Report Mar 1, 2014 2911
Preparation and characterization of low density polyethylene/thermoplastic sago starch/Kenaf core fiber composites and their hybrid composites with halloysite clay. Sarifuddin, Norshahida; Ismail, Hanafi; Ahmad, Zuraida Report Mar 1, 2014 3783
Characterizations of thermoplastic starch and starch reinforced montmorillonite clay nanocomposite. Humairah, A.R.N.; Zuraida, A.; Norshahida, S.; Naqiah, Z.S. Report Mar 1, 2014 2404
Electrical and flammability properties of alumina trihydrate filled polypropylene/ethylene propylene diene monomer composites as insulators in cable applications. Farzad, Reza Hashemi; Hassan, A.; Piah, M.A.M.; Jawaid, M. Report Mar 1, 2014 3413
Process-property-structure relationship in miniaturized injection moulded polyoxymethylene samples. Baldi, F.; Bongiorno, A.; Fassi, I.; Franceschini, A.; Pagano, C.; Ricco, T.; Surace, R.; Tescione, Report Mar 1, 2014 5711
Synthesis of new compatibilizers to poly(lactic acid) blends. Gallego, R.; Lopez-Quintana, S.; Basurto, F.; Nunez, K.; Villarreal, N.; Merino, J.C. Report Mar 1, 2014 5312
Control of the mechanical and thermal properties of semicrystalline polymers via a new processing route of the equal channel multiple angular extrusion. Beloshenko, V.A.; Voznyak, A.V.; Voznyak, Y.V. Report Mar 1, 2014 5556
Essential work of fracture analysis of short glass fiber and/or calcite reinforced ABS/PA6 composites. Yilmaz, Sinan; Yilmaz, Taner; Kahraman, Biricik Report Mar 1, 2014 5062
Fabrication and characterization of Poly(Methyl Methacrylate)/[CaCu.sub.3]T[i.sub.4][O.sub.12] composites. Thomas, P.; Ravindran, Ernest R.S.; Varma, K.B.R. Report Mar 1, 2014 4222
Preparation of a versatile precursor of novel functionalized polymers: the influence of polymerization conditions on the structure of poly [1-(2-hydroxyethyl)aziridine]. Sakalyte, Asta; Reina, Jose Antonio; Giamberini, Marta; Lederer, Albena Report Mar 1, 2014 7057
The viscoelastic behavior of concentrated polyacrylonitrile/1-butyl-3-methylimidazolium chloride from solution to gel. Zhu, Xinjun; Saba, Hina; Zhang, Yumei; Wang, Huaping Report Mar 1, 2014 5207
Low percolation threshold and high electrical conductivity in melt-blended polycarbonate/multiwall carbon nanotube nanocomposites in the presence of poly([epsilon]-caprolactone). Maiti, Sandip; Suin, Supratim; Shrivastava, Nilesh K.; Khatua, B.B. Report Mar 1, 2014 9725
Synthesis and characterization of methacrylic acid-based molecular imprinted polymers by positron lifetime spectroscopy. Pasang, Tenzin; Chikkakuntappa, Ranganathaiah Report Mar 1, 2014 5526
Structural, optical, and electrical characterization of the poly[9,9-dioctylfluorenyl-2,7-diyl]-co-1,4-benzo-(2,1,3)-thiadiazole thin film fabricated by electrostatic spray technique. Mustafa, Maria; Kim, Hyung Chan; Doh, Yang-Hui; Choi, Kyung Hyun Report Mar 1, 2014 3991
Precipitation polymerization of PLGA with Sn[(Oct).sub.2]/BuOH in supercritical carbon dioxide. Zhan, Shiping; Ren, Jianpeng; Wang, Weijing; Zhao, Qicheng; Zhou, Jinxia Report Mar 1, 2014 4712
Mechanical and morphological properties of a ternary polyamide 6 Nanocomposite with optimized stiffness/ toughness performance. Geier, Simon Report Feb 1, 2014 4950
Elastomeric ablative nanocomposites used in hyperthermal environments. Iqbal, Nadeem; Sagar, Sadia; Khan, Mohammad Bilal; Rafique, Hafiz Muhammad Report Feb 1, 2014 4221
Effects of reactive and nonreactive poss types on the mechanical, thermal, and morphological properties of plasticized poly(lactic acid). Kodal, Mehmet; Sirin, Humeyra; Ozkoc, Guralp Report Feb 1, 2014 6569
Hydrophilic modification of high-strength polyvinylidene fluoride hollow fiber membrane. Zhang, Xuliang; Xiao, Changfa; Hu, Xiaoyu; Li, Xianfeng; Wang, Rui Report Feb 1, 2014 6395
Spectroscopic Study of Film Formation From Polystyrene Latex/Ti[0.sub.2] Nanocomposites Prepared by Dip-Coating Method. Sunay, M. Selin; Pekcan, Onder; Rahman, Mahbubor; Elaissari, Abdelhamid; Ugurl, Saziye Report Feb 1, 2014 7060
Structures and properties of injection-molded biodegradable polylactic acid nanocomposites prepared with untreated and treated multiwalled carbon nanotubes. Mina, M.F. Beg, M.D.H. Islam, M.R. Nizam, A. Alam, A.K.M.M. Yunus, R.M. Report Feb 1, 2014 6129
Mechanical reinforcement of polyethylene using n-alkyl group-functionalized multiwalled carbon nanotubes: effect of alkyl group carbon chain length and density. Wei, Li; Jiang, Wenchao; Goh, Kunli; Chen, Yuan Report Feb 1, 2014 5555
Toughening modification of Poly(vinyl chloride)/ [alpha]-methylstyrene-acrylonitrile-butadiene-styrene copolymer blends via adding chlorinated polyethylene. Zhang, Zhen; Zhang, Jun; Liu, Hongyong Report Feb 1, 2014 4946
Modeling nonlinear stress relaxation of polymers. Andre, J.R.S.; Pinto, J.J.C. Cruz Report Feb 1, 2014 9544
Preparation of microfiltration membranes with controlled pore sizes by interfacial polymerization on electrospun nanofibrous membranes. Chen, Jyh-Chien; Wu, Jin-An; Lin, Kun-Hsien; Lin, Po-Ju; Chen, Jyun-Hong Report Feb 1, 2014 4047
Computer-Aided Mathematical Modeling and Numerical Simulation and Theoretical Analysis of the Polypropylene Polymer Air Drawing in Spunbonding Nonwoven Process. Bo, Zhao Report Feb 1, 2014 7600
Developing bipolar plates for fuel cells: conductive polymer composites, prepared by injection and compression molding, make interesting candidates for these components. Kiraly, Anett; Ronkay, Ferenc Feb 1, 2014 1349
Polymer composites; v.3: Biocomposites. Book review Feb 1, 2014 108
Polymer Composites; 3v. Book review Feb 1, 2014 164
Electrically conductive multiphase polymer blend carbon-based composites. Brigandi, Paul J. (1), (2) Cogen, Jeffrey M. (1) Pearson, Raymond A. (2) Jan 1, 2014 11303
Talc as a nucleating agent and reinforcing filler in polylactic acid composites. Thomas, A. Shakoor, N.L. Jan 1, 2014 4431
Blends of high-density polyethylene with chlorinated polyethylene: morphology, thermal, rheological, and mechanical properties. Vikas, Chaudhry; Mittal, Vikas Jan 1, 2014 5337
The effect of the dry glass transition temperature on the synthesis of paraffin microcapsules obtained by suspension-like polymerization. Simon, Diego; Rodriguez, Juan F.; Sanchez, Paula; Sanchez-Silva, Luz Jan 1, 2014 4853
Photo-responsive monoolein cubic phase incorporating hydrophobically modified polyvinyl alcohol-coumarin conjugate. Lee, Mi Sun; Kim, Jin-Chul Jan 1, 2014 3865
China XD Plastics Breaks Ground on 300 Thousand Tons Polymer Composites Production and R&D Project in Southwest China. Dec 23, 2013 1048
Simplified load distribution factors for fiber reinforced polymer composite bridge decks/Supaprastinti apkrovos pasiskirstymo koeficientai tiltams su pluostu armuoto polimero paklotu/Vienkarsota slodzes sadalijuma koeficienta noteiksana kompozitam, ar skiedram stiegrotam polimera tilta klajam/Lihtsustatud koormusjaotustegurid fiibriga armeeritud polumeerkomposiit silladekile. Prachasaree, Woraphot; Sookmanee, Pongsak; Limkatanyu, Suchart; GangaRao, Hota V.S. Report Dec 1, 2013 4711
Surface resistance and diffusion characteristics of toluene into calcium carbonate- and polymer-coated calcium carbonate-filled natural rubber composites. Konar, Bidyut B.; Saha, Mausumi Report Dec 1, 2013 6466
Improvement in toughness and crystallization of poly(L-lactic acid) by melt blending with ethylene/methyl acrylate/glycidyl methacrylate terpolymer. Zhang, Xin; Li, Yi; Han, Lijing; Han, Changyu; Xu, Kun; Zhou, Chao; Zhang, Mingyao; Dong, Lisong Report Dec 1, 2013 5913
Simulation of polymer flow using smoothed particle hydrodynamics method. Riviere, S.; Khelladi, S.; Farzaneh, S.; Bakir, F.; Tcharkhtchi, A. Report Dec 1, 2013 5478
Temperature-sensitive PVDF hollow fiber membrane fabricated at different air gap lengths. Shen, Xiang; Zhao, Yiping; Feng, Xia; Zhang, Qiang; Chen, Li Report Dec 1, 2013 4203
Rheological and electrical properties of carbon black-based poly(vinylidene fluoride) composites. Wang, Jianghong; Wu, Defeng; Li, Xiang; Zhang, Ming Report Dec 1, 2013 4220
Processing and structural properties of in situ polymerized poly(tetrafluoroethylene)/graphite fluoride composites. Mel'nikov, V. P.; Addiego, F.; Smirnov, V.V.; Ruch, D.; Berlin, A.A.; S.A. Patlazhan Report Dec 1, 2013 3936
On the interrelationship of transreaction with viscoelastic properties of polyethylene terephthalate/polyethylene naphthalate blends in the presence of nanoclay. Khonakdar, Hossein All; Jafari, Seyed Hassan; Asadinezhad, Ahmad; Zolali, Ali; Wagenknecht, Udo; Hei Report Dec 1, 2013 5969
Influence of mesophase-crystal transition on thermal and mechanical properties of stretched polyl-lactidemesophase-crystal transition on thermal and mechanical properties of stretched poly(L-lactide). Lv, Ruihua; Zou, Shufen; Na, Bing; Deng, Huiyu; Yu, Zhiwei Report Dec 1, 2013 2386
Preparation and characterization of high performance exfoliated montmorillonite/silicone rubber nanocomposites with enhanced mechanical properties. Ismail, N.I. Nik; Ansarifar, A.; Song, M. Report Dec 1, 2013 7807
Anticandidal activity of cobalt containing sunflower oil-based polymer. Singh, Taruna; Khan, Nazia Umar; Shreaz, Sheikh; Hashmi, Athar Adil Report Dec 1, 2013 5129
Morphologies and crystal structures of styrene-acrylonitrile/isotactic polypropylene ultrafine fibers fabricated by melt electrospinning. Cao, Li; Dong, Mu; Zhang, Anyang; Liu, Yong; Yang, Weimin; Su, Zhiqiang; Chen, Xiaonong Report Dec 1, 2013 5114
Effect of interfacial interactions on the crystal growth rate in model PE/Si[O.sub.2] nanocomposites: comparing experiments with Lauritzen-Hoffman model and MD simulation. Jancar, J.; Balkova R. Report Dec 1, 2013 6464
Computational modeling of polymer composites; a study of creep and environmental effects. Book review Dec 1, 2013 137
Polymer composites; v.2: Nanocomposites. Book review Dec 1, 2013 107
US demand for fiber-reinforced plastic composites to reach 4.3 billion pounds in 2017. Nov 23, 2013 475
In situ emulsion polymerization and characterization of poly(butyl acrylate-co-methyl methacrylate)/silica nanosystems. Buhin, Zrinka; Blagojevic, Sanja Lucic; Leskovac, Mirela Report Nov 1, 2013 4693
Thermal properties and side chain crystallinity of styrene and n-alkyl methacrylate terpolymers. Karazija, Tomislav; Vidovic, Elvira; Jukic, Ante Report Nov 1, 2013 3821
Influence of magnetic field on the dissolution profile of cotrimoxazole inserted into poly(lactic acid-co-glycolic acid) and maghemite nanocomposites. Pereira, E.D.; Souza, F.G., Jr.; Santana, C.I.; Soares, D.Q.; Lemos, A.S.; Menezes, L.R. Report Nov 1, 2013 5364
Irradiation effects in poly(ethylene oxide)/silica nanocomposite films and gels. Jurkin, Tanja; Pucic, Irina Report Nov 1, 2013 4858
Semi-interpenetrated network with improved sensitivity based on poly(N-isopropylacrylamide) and poly(aspartic acid). Nistor, Manuela T.; Chiriac, Aurica P.; Nita, Loredana E.; Neamtu, Iordana; Vasile, Cornelia Report Nov 1, 2013 4836
Effects of microsized and nanosized carbon fillers on the thermal and electrical properties of polyphenylene sulfide based composites. Khan, Muhammad Omer; Leung, Siu N.; Chan, Ellen; Naguib, Hani E.; Dawson, Francis; Adinkrah, Vincent Report Nov 1, 2013 4923
PS/Ti[0.sub.2] (polystyrene/titanium dioxide) composite nanofibers with higher surface-to-volume ratio prepared by electrospinning: morphology and thermal properties. Madani, Mohammad; Sharifi-Sanjani, Naser; Hasan-Kaviar, Ahmad; Choghazardi, Mossayeb; Faridi-Majidi, Report Nov 1, 2013 3027
In-line turbidity monitoring of the second phase droplets deformation during extrusion. Zborowski, L.; Canevarolo, S.V. Report Nov 1, 2013 4580
Study of the morphology and rheological behavior of polymer-modified asphalt blends prepared with poly(styrene-b-butadiene-b-styrene) and poly(styrene-b[[(butadiene).sub.1-x] -[(ethylene-co-butylene).sub.x]]-b-styrene) of star-like molecular architecture. Aguirre, Paola Gonzalez; Torres, Luis Medina; Fonteix, Christian; Pla, Fernand; Najera, Rafael Herre Report Nov 1, 2013 6022
Curing behavior and rheology properties of alkyl-imidazolium-treated rectorite/epoxy nanocomposites. Li, Wei; Hou, Linxi; Zhou, Qi; Yan, Liu; Loo, Leslie S. Report Nov 1, 2013 4327
Preparation of polypropylene/nanoclay composite fibers. Guo, Zengwei; Hagstrom, Bengt Report Oct 1, 2013 6546
Synthesis of PEDOT:PSS (poly(3,4-ethylenedioxythiophene)/poly(4-styrene sulfonate))/ NGPs (nanographitic platelets) nanocomposites as chemiresistive sensors for detection of nitroaromatics. Rattan, Sunita; Singhal, Prachi; Verma, A.L. Report Oct 1, 2013 3903
Thermal annealing-induced superior toughness in polypropylene/polyethylene glycol blend and its structural origin. Li, Xiuyun; Wang, Ke; Fu, Qiang Report Oct 1, 2013 4182
Effect of dispersion method and process variables on the properties of supercritical C[O.sub.2] foamed polystyrene/graphite nanocomposite foam. Yeh, Shu-Kai; Huang, Chien-Hsiung; Su, Chi-Chun; Cheng, Kuo-Chung; Chuang, Tsu-Huang; Guo, Wen-Jeng; Report Oct 1, 2013 7126
The effect of poly[styrene-b-ethylene-co-butylene-b-styrene] on dielectric, thermal, and morphological characteristics of polypropylene/silica nanocomposites. Panaitescu, Denis Mihaela; Vuluga, Zina; Notingher, Petru V.; Nicolae, Cristian Report Oct 1, 2013 7497
Study on toughening effect of maleic anhydride-grafted-poly(ethylene-octene) to EVOH and their compatibility. Yang, Lin; Zhang, Anqiang; Wang, Lianshi; Chen, Runming; Zeng, Yutang; Wu, Wenzhu Report Oct 1, 2013 5187
Effect of prior photodegradation on the biodegradation of polypropylene/poly3-hydroxybutyrate blends. Sadi, Roberta K.; Fechine, Guilhermino J.M.; Demarquette, Nicole R. Report Oct 1, 2013 8089
Preparation of different dendritic-layered silicate nanocomposites. Amin, Amal; Sarkar, Rajarshi; Moorefield, Charles N.; Newkome, George R. Report Oct 1, 2013 4689
Modification of tensile and impact properties of poly(butylene terephthlate) by incorporation of styrene-ethylene-butylene-styrene and maleic anhydride-grafted-SEBS (SEBS-g-MA) terpolymer. Sharma, Rajul; Maiti, S.N. Report Oct 1, 2013 6384
Estimation of tensile strength of inorganic plate-like particulate reinforced polymer composites. Liang, Ji-Zhao Report Sep 1, 2013 2479
Effect of EPDM-g-MAH on the morphology and properties of PA6/EPDM/HDPE ternary blends. Zhou, Yan; Wang, Wei; Dou, Rui; Li, Lan-peng; Yin, Bo; Yang, Ming-bo Report Sep 1, 2013 6548
Instability of styrene/polystyrene/polybutadiene/polystyrene-b-polybutadiene emulsions that emulate styrene polymerization in the presence of polybutadiene. Velasquez, Eliezer; Oliva, Haydee; Muller, Alejandro J.; Lopez, Juan V.; Vega, Jorge; Meira, Gregori Report Sep 1, 2013 7069
On thermal conductivity of micro- and nanocellular polymer foams. Sundarram, Sriharsha S.; Li, Wei Report Sep 1, 2013 5284
Organomodification of montmorillonite and its effects on the properties of poly(butylene succinate) nanocomposites. Phua, Y.J.; Chow. W.S.; Ishak, Z.A. Mohd Report Sep 1, 2013 6015
High polymer/surfactant ratio in the seeded semicontinuous heterogeneous polymerization of vinyl acetate. Martinez-Gutierrez, Hugo; Ovando-Medina, Victor M.; Peralta, Rene D.; Mendizabal, Eduardo; Puig, Jor Report Sep 1, 2013 4322
Three-dimensional multielectrode-controlled two orthogonal direction bendable IPMC actuator with an active clasp. Feng, Guo-Hua; Tsai, Jen-Wei Report Sep 1, 2013 4929
Non-destructive evaluation (NDE) of polymer matrix composites; techniques and applications. Book review Aug 1, 2013 120
Investigation of acrylamide-modified melamine-formaldehyde resins as a compatibilizer for kenaf-unsaturated polyester composites. Ren, Xiaofeng; Li, Chunhong; Li, Kaichang Report Aug 1, 2013 5125
Influence of moieties on morphology, thermal, and dielectric properties in polyamide-polyhedral oligomeric silsequioxanes nanocomposites. Gnanasekaran, D.; Walter, P. Ajit; Reddy, B.S.R. Report Aug 1, 2013 3417
Synthesis, characterization, and C[O.sub.2] permeation properties of acetylene-terminated polyimide membranes. Kanehashi, Shinji; Onda, Masaki; Shindo, Ryohei; Sato, Shuichi; Kazama, Shingo; Nagai, Kazukiyo Report Aug 1, 2013 5146
Microstructure, thermal, physico-mechanical and tribological characteristics of molybdenum disulphide-filled polyamide 66/carbon black composites. Basavaraj, E.; Ramaraj, B.; Lee, Joong-Hee; Siddaramaiah, Report Aug 1, 2013 6335
Plastisol foaming process. Decomposition of the foaming agent, polymer behavior in the corresponding temperature range and resulting foam properties. Verdu, J.; Zoller, A.; Marcilla, A. Report Aug 1, 2013 4180
Synthesis, swelling capacity, and texture of polymers from monomers of sulfonic acid and acrylamide. Rosa, Fatima; Bordado, Joao; Casquilho, Miguel Report Aug 1, 2013 3859
First normal stress difference in capillary extrusion flow of nanometer calcium carbonate-filled PLLA biocomposites. Liang, Ji-Zhao Report Aug 1, 2013 3909
Synergistic effect of hindered amine light stabilizers/ultraviolet absorbers on the polyvinyl chloride/powder nitrile rubber blends during photodegradation. Zhang, Chai, J. Report Aug 1, 2013 4726
Birefringence in injection-compression molding of amorphous polymers: simulation and experiment. Kim, Nam Hyung; Isayev, Avraam I. Report Aug 1, 2013 13130
Investigation into the influence of flame retardant additives on some fire properties of polyester materials applying small-scale testing techniques. Polka, Marzena; Galaj, Jerzy; Karpovic, Zbignev Report Aug 1, 2013 8675
Synthesis, characterization, biological activity, and thermal stability of new styrenic polymer having pendant ketone and its some derivatives. Erol, Ibrahim; Sahin, Zehra; Ozcan, Levent Report Jul 1, 2013 6633
Minimization of surface friction effect on scratch-induced deformation in polymers. Hossain, Mohammad Motaher; Minkwitz, Rolf; Sue, Hung-Jue Report Jul 1, 2013 4582
Characterization and thermal degradation of poly(d,l-lactide-co-glycolide) composites with nanofillers. Palacios, Jordana; Albano, Carmen; Gonzalez, Gema; Castillo, Reina Veronica; Karam, Arquimedes; Covi Report Jul 1, 2013 8574
Mechanical properties of high density packed silica/poly(vinyl chloride) composites. Conradi, M.; Zorko, M.; Jerman, I.; Orel, B.; Verpoest, I. Report Jul 1, 2013 2968
Stress-assisted formation of surface gratings on polymer films. Lin, Chiao-Chi; Yang, Fuqian; Chin, Joannie W.; Sung, Lipiin; Lee, Sanboh Report Jul 1, 2013 5762
Pervaporation study of ethylene glycol dehydration through synthesized (PVA-4A)/polypropylene mixed matrix composite membranes. Shahverdi, Mahnaz; Baheri, Bahareh; Rezakazemi, Mashallah; Motaee, Elahe; Mohammadi, Toraj Report Jul 1, 2013 3244
Transient computational fluid dynamics modeling of pervaporation separation of aromatic/aliphatic hydrocarbon mixtures using polymer composite membrane. Rezakazemi, Mashallah; Iravaninia, Mona; Shirazian, Saeed; Mohammadi, Toraj Report Jul 1, 2013 4716
Investigation of elastic constants of polymer/nanoparticles composites using the Brillouin spectroscopy and the mechanical homogenization modeling. Maurice, Gerard; Rouxel, Didier; Vincent, Brice; Hadji, Rachid; Schmitt, Jean-Francois; Taghite, M'b Report Jul 1, 2013 5999
Effects of the functionalizing agent, itaconic acid, on the mechanical properties of microemulsion-made core/shell polymers. Rabelero, Martin; Trujillo, Agustin; Ceja, Israel; Canche, Gonzalo; Mendizabal, Eduardo; Esquena, Jo Report Jul 1, 2013 4895
Injection molding electroluminescent components. Middleton, B.; Goodship, V. Report Jul 1, 2013 4878
Preparation and characterization of polypyrrole/selenium composites. Ozkazanc, Ersel; Zor, Sibel; Ozkazanc, Hatice; Gumus, Serap Report Jun 1, 2013 3677
The synthesis of poly(vinyl cinnamates) and its self-assembled structure. Du, Haiyan; Liu, Ruodong; Zhang, Junhua; Liu, Shibin; Hao, Xiaogang; Han, Xuemin Report Jun 1, 2013 3414
New thiophene-based donor-acceptor conjugated polymers carrying fluorene or cyanovinylene units: synthesis, characterization, and electroluminescent properties. Murali, Maluvadi G.; Dalimba, Udayakumar; Yadav, Vandana; Srivastava, Ritu Report Jun 1, 2013 7380
Toughening and brittle-tough transition in polyamide 12-organoclay/maleated styrene-ethylene-co-butylene-styrene nanocomposites. Gonzalez, Imanol; Zabaleta, Asier; Eguiazabal, Jose Ignacio Report Jun 1, 2013 4992
Electrically conducting biodegradable polymer composites (polylactide-polypyrrole and polycaprolactone-polypyrrole) for passive resonant circuits. Boutry, Clementine M.; Gerber-Horler, Isabel; Hierold, Christofer Report Jun 1, 2013 6774
Preparation and phase behavior of blends of polysulfone-based polymers with phosphorous-containing smectic-a liquid crystals. Vlad-Bubulac, Tachita; Serbezeanu, Diana; Hamciuc, Corneliu; Petreus, Oana; Carja, lonela-Daniela; L Report Jun 1, 2013 4417
Study on glass transition temperature and mechanical properties of cadmium sulfide/polystyrene nanocomposites. Agarwal, Sonalika; Patidar, Dinesh; Saxena, N.S. Report Jun 1, 2013 4822
Synthesis, structure, and thermal stability of poly(methyl methacrylate)-co-poly(3-tri(methoxysilyil)propyl methacrylate)/montmorillonite nanocomposites. Carvalho, Hudson W.P.; Suzana, Ana F; Santilli, Celso V.; Pulcinelli, Sandra H. Report Jun 1, 2013 5181
Water and dye sorption studies of novel semi IPNs: acrylamide/4-styrenesulfonic acid sodium salt/PEG hydrogels. Uzum, Omer Baris; Karadag, Erdener Report Jun 1, 2013 6404
Effect of functionalized nanosilica on the mechanical, dynamic-mechanical, and morphological performance of polycarbonate/nanosilica nanocomposites. Biswal, Manoranjan; Mohanty, Smita; Nayak, Sanjay K.; Kumar, P. Sudheesh Report Jun 1, 2013 6547
Enhanced polymer filling and uniform shrinkage of polymer and mold in a hot embossing process. He, Yong; Fu, JianZhong; Zhao, Peng; Chen, Zi Chen Report Jun 1, 2013 3095
Electrospun poly(ethylene oxide)/hydrated iron oxide/sodium alginate composite nanofibers with multi-functional properties. Moon, SungCheal; Lee, Jung-lim Report Jun 1, 2013 3378
Fabrication of polystyrene/multiwalled carbon nanotube composite films synthesized by in situ microemulsion polymerization. Patole, Archana S.; Patole, Shashikant P.; Yoo, Ji-Beom; An, Jeong-Ho; Kim, Tae-Ho Report Jun 1, 2013 5234
Optical limiting materials: synthesis, electrochemical and optical studies of new thiophene based conjugated polymers carrying 1,3,4-oxadiazole units. Shivashankar, Sunitha M.; Anantapadmanabha, Vishnumurthy K.; Adhikari, Airody Vasudeva Report Jun 1, 2013 6717
Innovating 21st-century infrastructure ... with plastics: polymers offer flexible, long-lasting options for beaten and battered bridges, seawalls, railroads, roofing, and more. Giordano, Geoff Jun 1, 2013 4003
Adhesion improvements of nanocellulose composite interfaces. Wolf, Rory A.; Girouard, Natalie; Xu, Shanhong; Meredith, J. Carson; Shofner, Meisha L.; Cross, Lion Jun 1, 2013 3102
Morphological aspects of injected polypropylene/clay nanocomposite materials. Salah, Hend Ben Hadj; Daly, Hachmi Ben; Denault, Johanne; Perrin, Florence Report May 1, 2013 4977
Preparation and Characterization of poly(trimethylene terephthalate)-poly(ethylene oxide terephthalate) segmented copolymer/multiwalled carbon nanotubes composites by in situ polymerization. Chen, Zhenming; Liu, Yan; Yao, Chenguang; Yang, Guisheng Report May 1, 2013 6037
Contribution of organomodified clay on hybrid microstructures and properties of epoxidized natural rubber-based nanocomposites. Chattopadhyay, Pijush Kanti; Praveen, Srinivasan; Das, Narayan Chandra; Chattopadhyay, Santanu Report May 1, 2013 6028
Time-dependent response of polypropylene/clay nanocomposites under tension and retraction. Drozdov, Alekse D.; Christiansen, Jesper deC. Report May 1, 2013 6055
Preparation and characterization of polypyrrole/clinoptilolite nanocomposite with enhanced electrical conductivity by surface polymerization method. Rashidzadeh, Azam; Olad, Ali; Ahmadi, Shirin Report May 1, 2013 3714
Mechanical, thermal, barrier, and rheological properties of poly(ether-block-amide) elastomer/organoclay nanocomposite prepared by melt blending. Choi, Myung-Chan; Jung, Ji-Yoen; Yeom, Hyun-Sik; Chang, Yong-Wook Report May 1, 2013 5520
Investigation of the influence of processing conditions on the thermal, rheological and mechanical behavior of polypropylene nanocomposites. Mattausch, H.; Laske, S.; Duretek, I.; Kreith, J.; Maier, G.; Holzer, C. Report May 1, 2013 6793
Poly(ester-amine) hyperbranched polymer as toughening and co-curing agent for epoxy/clay nanocomposites. Eissa, Mohamed M.; Youssef, Moshera S.A.; Ramadan, A.M.; Amin, Amal Report May 1, 2013 5493
Physical and dyeing properties of polyethylene poly(ethylene terephthalate)/montmorillonite nanocomposite filament yarns. Ozen, Ilhan; Gunes, Servet Report May 1, 2013 5839
Crystallization behavior and morphology of polylactide and PLA/clay nanocomposites in the presence of chain extenders. Najafi, N.; Heuzey, M.C.; Carreau, P.J. Report May 1, 2013 7679
Properties of coconut shell powder-filled polylactic acid ecocomposites: effect of maleic acid. Chun, Koay Seong; Husseinsyah, Salmah; Osman, Hakimah Report May 1, 2013 3977
Dispersed nanofillers. Corneliussen, Roger Brief article May 1, 2013 157
Polymer composites with carbonaceous nanofillers; properties and applications. Brief article Apr 1, 2013 113
Influence of processing parameters on the structure of melt blended polyethylene/organoclay nanocomposites produced by a masterbatch route. Besco, Stefano; Modesti, Michele; Lorenzetti, Alessandra Report Apr 1, 2013 5375
Dielectric behavior of aluminum hydroxide-filled oil-extended ethylene-propylene-diene-monomer rubber composites in microwave fields. Nair, Ajalesh Balachandran; Kalappura, Ullas G.; Kurian, Philip; Joseph, Rani Report Apr 1, 2013 4214
Synthesis and characterization of high performance, transparent interpenetrating polymer networks with polyurethane and poly(methyl methacrylate). Bird, S.A.; Clary, D.; Jajam, K.C.; Tippur, H.V.; Auad, M.L. Report Apr 1, 2013 4658
New polyurethane-based magnetostrictive composites: dynamical mechanical properties. Vilas, J.L.; Laza, J.M.; Rodriguez, C.; Rodriguez, M.; Leon, L.M. Report Apr 1, 2013 4541
Development of novel porous nasal scaffold using injection molding. Teng, Ping-Tun; Chern, Ming-Jyh; Shen, Yung-Kang; Chiang, Yuh-Chyun Report Apr 1, 2013 4281
Properties of grafted polymer metal complexes as ion exchangers and its electrical conductivity. Ei-Arnaouty, M.B.; Ghaffar, Abdel A.M; Eid, M. Report Apr 1, 2013 4543
Properties of thermoplastic starch and TPS/polycaprolactone blend reinforced with sisal whiskers using extrusion processing. Campos, A.; Teodoro, K.B.R.; Teixeira, E.M.; Correa, A.C.; Marconcini, J.M.; Wood, D.F.; Williams, T Report Apr 1, 2013 5093
Effect of the nanoclay types on the rheological response of unsaturated polyester-clay nanocomposites. Rezadoust, Amir Masoud; Esfandeh, Masoud; Beheshty, Mohammad Hosain; Heinrich, Gert Report Apr 1, 2013 4974
Preparation and properties of carbon nanotube composites with nitrile- and styrene-butadiene rubbers. Kummerlowe, Claudia; Vennemann, Norbert; Yankova, Ekaterina; Wanitschek, Mirko; Grob, Catharina; Hei Report Apr 1, 2013 4814
Nanoscale characterization of interphase properties in maleated polypropylene-treated natural fiber-reinforced polymer composites. Nair, Sandeep S.; Hurley, Donna C.; Wang, Siqun; Young, Timothy M. Report Apr 1, 2013 4875
High energy density nanocomposites based on poly(vinylidene fluoride-chlorotrifluoroethylene) and barium titanate. Wen, Fei; Xu, Zhuo; Xia, Weimin; Wei, Xiaoyong; Zhang, Zhicheng Report Apr 1, 2013 4323
Hydrophilic foams. Corneliussen, Roger Brief article Apr 1, 2013 103
Effects of polyvinyl chloride and aluminum trichloride on structure and properly of polyaniline composite films by electron beam deposition. Liu, Zhubo; Rogachev A.A.; Zhou, Bing; Yarmolenko, M.A.; Ragachev, A.V.; Gorbachev, D.L.; Jiang, Xia Report Mar 1, 2013 3010
A novel hyperbranched polyborazine and its reactive blend with benzoxazine thermosets. Liu, Yuhong; Zhang, Xiying; Yang, Xin Report Mar 1, 2013 5242
The aspect ratio of epoxy matrix nanocomposites reinforced with graphene stacks. Corcione, Carola Esposito; Freuli, Fabrizio; Maffezzoli, Alfonso Report Mar 1, 2013 5506
Nanocomposites of poly(ethylene oxide) and multiwall carbon nanotube prepared using an organic salt-assisted dispersion technique. Ratna, Debdatta; Jagtap, Siddheshwar B.; Abraham, Thomas Report Mar 1, 2013 4448
Structure and performance of temperature-sensitive poly(vinylidene fluoride) hollow fiber membrane fabricated at different take-up speeds. Shen, Xiang; Zhao, Yiping; Chen, Li; Feng, Xia; Yang, Duo; Zhang, Qiang; Su, Dan Report Mar 1, 2013 4546
Effects of annealing time and temperature on the crystallinity and heat resistance behavior of injection-molded poly(lactic acid). Srithep, Yottha; Nealey, Paul; Turng, Lih-Sheng Report Mar 1, 2013 4988
Preparation and release of avermectin-loaded cellulose acetate ultrafinefibers. Zhao, Dongmei; Zhang, Yanhong; Lv, Lili; Li, Jian Report Mar 1, 2013 3280
Dynamic Rheology and morphology of HDPE-fumed silica composites: effect of interface modification. Nandi, Sangita; Bose, Sanjukta; Mitra, Susanta; Ghosh, Anup K. Report Mar 1, 2013 4181
Natural rubber/cis-1,4-polybutadiene nanocomposites: vulcanization behavior, mechanical properties, and thermal stability. Bottazzo, Jlenia; Guglielmi, Massimo; Polizzi, Stefano; Brusatin, Giovanna Report Mar 1, 2013 4416
Processable performs. Corneliussen, Roger Brief article Mar 1, 2013 151
Field and laboratory decay evaluations of wood-plastic composites. Ibach, Rebecca E.; Gnatowski, Marek; Sun, Grace Mar 1, 2013 8260
Protein modifiers generally provide limited improvement in wood bond strength of soy flour adhesives. Frihart, Charles R.; Lorenz, Linda Abstract Mar 1, 2013 3912
Reinforcing effect of nanosilica on the properties of natural rubber/reclaimed ground rubber tire vulcanizates. De, Debapriya; Panda, Prabir Kr.; Roy, Madhusudan; Bhunia, Satyaban; Jaman Abu Ismail Report Feb 1, 2013 6191
Development, optimization, and evaluation of emulsion-gelled floating beads using natural polysaccharide-blend for controlled drug release. Nayak, Amit Kumar; Pal, Dilipkumar; Malakar, Jadupati Report Feb 1, 2013 7564
Thermomechanical behavior of polymer/layered silicate clay nanocomposites based on unmodified low density polyethylene. Grigoriadi.K.; Giannakas, A.; Ladavos, A.; Barkoulal, N.-M. Report Feb 1, 2013 5282
Studies on fabrication, characterization, and metal extraction using metal chelating nonwoven nanofiber mats of poly(vinyl alcohol) and sodium alginate blends. Rathna, G.V.N.; Birajdar, Mallinath S.; Paul, Manish Bhagwani Report Feb 1, 2013 7518
Phthalonitrile-containing poly(amide imide)s With nanoactuation properties. Hamciuc, Elena; Hamciuc, Corneliu; Carja, lonela-Daniela; Vlad-Bubulac, Tachita; lgnat Mircea Report Feb 1, 2013 5603
High impact poly(lactic acid)/poly(ethylene octane) blends prepared by reactive blending. Feng, Yulin; Hu, Yuexin; Yin, Jinghua; Zhao, Guiyan; Jiang, Wei Report Feb 1, 2013 4607
Role of carboxylic acid functionalized single walled carbon nanotubes in polyamide 6/poly(methyl methacrylate) blend. Madhukar, K.; Sainath, A.V. Sesha; Rao, B. Sanjeeva; Kumar, D. Suresh; Bikshamaiah, N.; Srinivas, Y. Report Feb 1, 2013 3527
Influence of two compatibilizers on Clay/PP nanocomposites properties. Potarniche, Catalina-Gabriela; Vuluga, Zina; Christiansen, Jesper de Claville; Radovici, Constantin; Report Feb 1, 2013 3267
Effect of heat treatment of carbon nanofibers on the electromagnetic shielding effectiveness of linear low density polyethylene nanocomposites. Villacorta, Byron S.; Ogale, Amod A.; Hubing, Todd H. Report Feb 1, 2013 4759
Poly-left-lactic acid tubular scaffolds via diffusion induced phase separation: control of morphology. Pavia, Francesco Carti; Carrubba, Vincenzo La; Ghersi, Giulio; Brucatol, Valerio Report Feb 1, 2013 6300
Thermomechanical and tensile properties of gamma-ray irradiated blends of cis-polyisoprene and trans-polyisoprene. Baboo, Mahesh; Sharma, Kananbala; Saxena, N.S.; Kumar, Manmohan Report Feb 1, 2013 4585
Proton-conducting blend membranes of crosslinked poly(vinyl alcohol)-sulfosuccinic acid ester and poly(1-vinyl-1,2,4-triazole) for high temperature fuel cells. Boroglu, Mehtap Safak; Celik, Sevim Unugur; Bozkurt, Ayhan; Boz, Ismail Report Jan 1, 2013 3601
New liquid crystalline columnar poly(epichlorohydrin-co-ethylene oxide) derivatives leading to biomimetic ion channels. Bhosale, Suryakant Vilasrao; Rasool, Muhammad Azam; Reina, Jose Antonio; Giamberini, Marta Report Jan 1, 2013 6284
Influence of 1,5-naphthalenediamine on thermomechanical properties of epoxy/copolyethersulphone blends. Cicala, G.; Blanco, I.; Latteri, A.; Oliveri, L.; Recca, A. Report Jan 1, 2013 4220
The performance of polypropylene wood-plastic composites with different rice straw contents using two methods of formation. He, Chunxia; Hou, Renluan; Xue, Jiao; Zhu, Dongjun Abstract Jan 1, 2013 2779
Volume optimization of polymer tube-bundle heat exchangers in air-heating applications. Meng, Lingjun; Jacobi, Anthony M. Report Jan 1, 2013 3563
Fabrication and applications of cellulose nanoparticle-based polymer composites. Pandey, Jitendra K.; Nakagaito, Antonio N.; Takagi, Hitoshi Report Jan 1, 2013 5147
Stretch-induced molecular ordering in amorphous/crystalline polylactide blends. Lv, Ruihua; Zou, Shufen; Na, Bing; Pan, Huayan; Deng, Huiyu Report Jan 1, 2013 3039
Nanocomposite films of poly(vinylidene fluoride) filled with polyvinylpyrrolidone-coated multiwalled carbon nanotubes: enhancement of [beta]-polymorph formation and tensile properties. Achaby, Mounir El; Arrakhiz, Fatima-Ezzahra; Vaudreuil, Sebastien; Essassi, El Mokhtar; Qaiss, Aboue Report Jan 1, 2013 6344
High-density polyethylene nanocomposites using masterbatches of chlorinated polyethylene/graphene oxide. Chaudhry, A.U.; Mittal, Vikas Report Jan 1, 2013 6036
Surface-modified talc particles by acetoxy groups grafting: effects on mechanical properties of polypropylene/talc composites. Castillo, Luciana A.; Barbosa, Silvia E.; Capiati, Numa J. Report Jan 1, 2013 4998
Thermal, mechanical, and rheological properties of polylactide/poly(1,2-propylene glycol adipate). Zhang, Huiliang; Fang, Jianyong; Ge, Huanhuan; Han, Lijing; Wang, Xuemei; Hao, Yanping; Han, Changyu Report Jan 1, 2013 3853
Optical properties of europium [(2,2'-bipyridine-N,N-dioxide).sub.2] [([NO.sub.3]).sub.3] complex-doped poly(methyl methacrylate). Puthiyottil, R.; Varghese, S.; Gopalakrishnapanicker, U.; Guthrie, J.T. Report Jan 1, 2013 3372
Rotational molding of polyethylene composites based on agave fibers. Lopez-Banuelos, R.H.; Moscoso, F.J.; Ortega-Gudino, P.; Mendizabal, E.; Rodrigue, D.; Gonzalez-Nunez Report Dec 1, 2012 4961
Role of 2-hydroxyethyl end group on the thermal degradation of polyethylene terephthalate and reactive melt mixing of poly(ethylene terephthalate)/poly(ethylene naphthalate) blends. Blanco, Ignazio; Cicala, Gianluca; Restuccia, Carmelo Luca; Latteri, Alberta; Battiato, Salvatore; S Report Dec 1, 2012 4731
Crystallization behavior and mechanical strength of poly(butylene succinate-co-ethylene glycol)-based Nanocomposites using functionalized multiwalled carbon nanotubes. Tan, Licheng; Chen, Yiwang; Zhou, Weihua; Ye, Suwen Report Dec 1, 2012 5132
Investigation of thermomechanical properties and matrix-filler interaction on polyimide/graphene oxide composites. Pramoda, Kumari P.; Mya, Khine Y.; Lin, Ting T.; Lu, Xuehong; He, Chaobin Report Dec 1, 2012 3892
Diallyl-1,12-diaminododecane-based cyclopolymers and their use as inhibitors for mild steel corrosion. Ali, Shaikh A.; Saeed, M.T.; EI-Sharif, Asma M.Z. Report Dec 1, 2012 7576
Effect of clay on the corrosion inhibition and dynamic mechanical properties of epoxy ester-polyurea-polysiloxane hybrid coatings. Singh-Beemat, Jaspreet; Iroh, Jude O. Report Dec 1, 2012 4281
Modification of lignin and its application as char agent in intumescent flame-retardant poly(lactic acid). Zhang, Rui Xiao, Xifu Tai, Qilong; Huang, Hua; Hu, Yuan Report Dec 1, 2012 4177
In situ fourier-transform infrared spectra analysis of hydrogen bond in polypropylene/chlorinated polypropylene/polyaniline composite. Yang, Lin; Zhang, Zhiye; Wang, Xinlong; Chen, Jinyao; Li, Huilin Report Dec 1, 2012 6996
Rheological behavior of cycloolefin copolymer/graphite composites. Kasgoz, Alper; Akin, Dincer; Durmus, Ali Report Dec 1, 2012 5266
Effect of titanium dioxide nanoparticles on polydimethylsiloxane/polyethersulfone composite membranes for gas separation. Madaeni, S.S.; Moahamadi, M.; Vatanpour, v.; Ghaemi, N. Report Dec 1, 2012 6070
More biodegradable materials. Corneliussen, Roger Brief article Nov 1, 2012 188
In acknowledgment of Professor Robert Weiss for his many years of outstanding editorial service to Polymer Engineering and Science and Polymer Composites. Lesser, Alan J. Editorial Nov 1, 2012 380
POLYCHAR 19. Adhikari, Rameshwar Conference notes Nov 1, 2012 336
Study of morphology, mechanical properties, and thermal behavior of green aliphatic-aromatic copolyester/bamboo flour composites. Adhikari, Rameshwar; Bhandari, Netra Lal; Causin, Valerio; Le, Hai H.; Radusch, Hans-Joachim; Michle Report Nov 1, 2012 3954
Cyclic deformations of polypropylene with a strain-controlled program. Drozdov, A.D.; Dusunceil, N. Report Nov 1, 2012 5839
The influence of processing route on the structuring and properties of high-density polyethylene (HDPE)/clay nanocomposites. Abu-Zurayk, Rund; Harkin-Jones, Eileen Report Nov 1, 2012 4743
Morphology, wettability, and mechanical properties of polycaprolactone/hydroxyapatite composite scaffolds with interconnected pore structures fabricated by a mini-deposition system. Jiang, Wenbo; Shi, Jun; Li, Wei; Sun, Kang Report Nov 1, 2012 3671
Injection molding without prior drying process by the gas counter pressure. Yoo, Yeong-Eun; Woo, Sang-Won; Kim, Sun Kyoung Report Nov 1, 2012 3641
Properties and structures of novel cyanate ester/organic rectorite nanocomposites. Yuan, Li; Gu, Aijuan; Liang, Guozheng; Ma, Xiaoyan; Lin, Chao; Chen, Feng Report Nov 1, 2012 5633
Synthesis of modified silica spheres used for the preparation of dual ultraviolet- and thermo-cured epoxyacrylate/silica composites. Su, Yu-Chieh; Cheng, Liao-Ping; Don, Trong-Ming Report Nov 1, 2012 7633
Thermorheological properties of poly [epsilon]-caprolactone/polylactide blends. Noroozi, Nazbanoo; Schafer, Laurel L.; Hatzikiriakos, Savvas G. Report Nov 1, 2012 5422
Research and Markets: Manufacturing Techniques for Polymer Matrix Composites (PMCs). Oct 30, 2012 352
Research and Markets: Polymer Composites with Carbonaceous Nanofillers. Oct 3, 2012 242
Supercritical [CO.sub.2] as an exfoliating aid for nanocomposite preparation: comparison of different processing methodologies. Thompson, M.R.; Zhuang, Z.; Liu, J.; Rodgers, W.R. Report Oct 1, 2012 8567
Crystallization, morphology, and mechanical properties of poly(butylene succinate)/poly(ethylene oxide)-polyhedral oligomeric silsesquioxane nanocomposites. Zhou, Weihua; Yuan, Shuaishuai; Tan, Licheng; Chen, Yiwang; Huang, Yulan Report Oct 1, 2012 4733
The orientation of carbon nanotubes in poly(ethylene-co-octene) microcellular foaming and its suppression effect on cell coalescence. Zhai, Wentao; Wang, Jing; Chen, Nan; Naguib, Hani E.; Park, Chul B. Report Oct 1, 2012 7493
Toward forced assembly of in situ low-density polyethylene composites reinforced with low-[T.sub.g] phosphate glass fibers: effects of matrix crystallization and shear deformation. Lanneluc, Romain; Bounor-Legare, Veronique; Fulchiron, Rene; Katena, Jin; Otaigbe, Joshua U. Report Oct 1, 2012 5209
Preparation and characterization of mixed matrix membranes based on poly(vinylidene fluoride) and zeolite 4A for gas separation. Shen, Yi; Lua, Aik Chong Report Oct 1, 2012 4476
Electron-beam deposition of polyethylene composite coatings at various initiators and inhibitors. Liu, Zhubo; Rogachev, A.A.; Zhou, Bing; Yarmolenko, M.A.; Rogachev, A.V.; Gorbachev, D.L.; Jiang, Xi Report Oct 1, 2012 3547
Barrier properties of poly(ethylene-co-vinyl acetate)/cellulose composite membranes. Elanthikkal, Silviya; Francis, Tania; Unnikrishnan, G.; Varghese, Soney; Guthrie, J.T. Report Oct 1, 2012 4036
Detecting impact toughness of polypropylene/poly(ethylene-co-octene) blends with various morphologies induced via chaotic and shear mixing. Li, Ke; Huang, Han-Xiong Report Oct 1, 2012 5762
Studies on compatibility of biodegradable starch/polyvinyl alcohol blends. Sreekumar, P.A.; Al-Harthi, Mamdouh A.; De, S.K. Report Oct 1, 2012 3434
Rheological and electrical percolation thresholds of carbon nanotube/polymer nanocomposites. Penu, Christian; Hu, Guo-Hua; Fernandez, Amaia; Marchal, Philippe; Choplin, Lionel Report Oct 1, 2012 5157
The birefringence and anisotropic planar shrinkage of polycarbonate/organoclay injection moldings. Sadeghi, Soheil; Nazockdast, Hossein; Mehranpour, Milad Report Oct 1, 2012 7351
Preparation and characterization of modified polysulfone membranes with high hydrophilic property using variation in coagulation bath temperature and addition of surfactant. Mousavi, S.M.; Saljoughi, E.; Ghasemipour, Z.; Hosseini, S.A. Report Oct 1, 2012 4251
Damage of unfilled crosslinked rubbers as the scission of polymer chains: modeling and tensile experiments. Melnikov, Alexei Y.; Leonov Arkady I. Report Oct 1, 2012 7945
Polymeric superabsorbing composite prepared using a glow-discharge electrolysis plasma for the removal of divalent heavy metal ions from aqueous solutions and its swelling properties. Wang, Xinggang; Gao, Jinzhang; Yang, Wu Report Oct 1, 2012 6894
Preparation and characterization of polyvinylidene fluoride nanofibrous membranes by Forcespinning[TM]. Vazquez, Beny; Vasquez, Horacio; Lozano, Karen Report Oct 1, 2012 2779
Polymer composites; v.1. Book review Oct 1, 2012 147
Composite materials handbook, v.3: Polymer matrix composites; materials usage, design, and analysis. Book review Oct 1, 2012 257
Composite materials handbook, v.2: Polymer matrix composites; materials properties. Book review Oct 1, 2012 257
The composite materials handbook, v.1: Polymer matrix composites; guidelines for characterization of structural materials. Book review Oct 1, 2012 295
Investigation on particular phase morphology of immiscible polyamide 12 and polystyrene blends prepared via anionic ring-opening polymerization. Wu, Bozhen; Xie, Tingxiu; Yang, Guisheng Report Sep 1, 2012 3664
Melt flow behavior in capillary extrusion of nanosized calcium carbonate-filled poly(L-lactic acid) biocomposites. Liang, Ji-Zhao; Tang, Chak-Yin; Zhou, Lin; Tsui, Chi-Pong; Li, Feng-Jiao Report Sep 1, 2012 3124
Rheological behavior of polypropylene nanocomposites at low concentration of surface modified carbon nanotubes. Thomas, Selvin P.; Girei, Salihu Adamu; Atieh, Muataz Ali; De, S.K.; Al-Juhani, Abdulhadi Report Sep 1, 2012 3146
Enhanced fatigue life of carbon nanotube-reinforced epoxy composites. Loos, M.R.; Yang, J.; Feke, D.L.; Manas-Zloczower Report Sep 1, 2012 3431
Rubber modification of unsaturated polyester resin with core-shell rubber particles: effect of shell composition. Ahmadi, M.; Moghbeli, M.R.; Shokrieh, M.M. Report Sep 1, 2012 5390
Effect of injection speed on phase morphology, crystallization behavior, and mechanical properties of polyoxymethylene/poly(ethylene oxide) crystalline/crystalline blend in injection processing. Bai, Shibing; Wang, Qi Report Sep 1, 2012 3649
X-ray diffraction and differential scanning calorimetry studies of a BaTi[O.sub.3]/polyvinylidene fluoride composites. Elzayat, M.Y.F.; El-Sayed, S.; Osman, H.M.; Amin, M. Report Sep 1, 2012 4053
Preparation and experimental parameters analysis of laser melt electrospun poly(L-lactide) fibers via orthogonal design. Li, Xiuyan; Liu, Huichao; Liu Jianli; Wang, Jiaona; Li, Congju Report Sep 1, 2012 2552
Adhesion of extrusion-coated polymer sealing layers to a fiber-based packaging maini with an atomic layer deposited aluminum oxide surface coating. Lahtinen, Kimmo; Johansson, Petri; Kaariainen, Tommi; Cameron, David C. Report Sep 1, 2012 3898
Design and fabrication of preshaped ionic polymer metal composite gripper by thermal treatment process. Kim, Dong-Ik; Seo, Beom-Ho; Lee, Seung-Ki; Park, Jae-Hyoung Report Sep 1, 2012 2990

Terms of use | Copyright © 2014 Farlex, Inc. | Feedback | For webmasters