Articles from Polymer Engineering and Science (September 1, 2009)

Title	Author	Type	Words
An innovative method of die design and evaluation of flow balance for thermoplastics extrusion profiles.	Zolfaghari, Abbas; Behravesh, Amir Hossein; Shakouri, Ehsan; Soury, Ehsan	Report	3330
Analysis of the structure and mass transport properties of nanocomposite polyurethane.	Corcione, C.Esposito; Mensitieri, G.; Maffezzoli, A.	Report	7035
Coating weight reduction by a carrier layer for tensioned-web slot coating.	Tsai, Han-Chih; Chang, Hsien-Ming; Liu, Ta-Jo	Report	4913
Conventional and RAFT miniemulsion copolymerizations of butyl methacrylate with fluoromethacrylate and monomer reactivity ratios.	Zhang, Qinghua; Wang, Qiongyan; Luo, Zhenhuan; Zhan, Xiaoli; Chen, Fengqiu	Report	4077
Design and electrical conductivity of poly(acrylic acid-g-gelatin)/graphite conducting gel.	Tang, Qunwei; Sun, Xiaoming; Wu, Jihuai; Li, Qinghua; Lin, Jianming	Report	4446
Dimensional study of thermoplastic parts made using sequential injection molding.	Aisa, Jorge; Castany, Javier	Report	3292
Dispersion, crystallization kinetics, and parameters of Hoffman-Lauritzen theory of polypropylene and nanoscale calcium carbonate composite.	Huang, Jiann-Wen	Report	6522
Effect of clay/water ratio during bentonite clay organophilization on the characteristics of the organobentonites and its polypropylene nanocomposites.	Silva, Suedina M.L.; Araujo, Paolo E.R.; Ferreira, Kaline M.; Canedo, Eduardo L.; Carvalho, Laura H.	Report	4352
Fabrication of segmented cladding fiber by bicomponent spinning.	Duan, Julan; Teng, Cuiqing; Han, Keqing; Yu, Muhuo; Wu, Wenxuan; Zhang, Qijin; Chiang, Kin Seng	Report	2890
Hydro-entangled bi-component microfiber nonwovens.	Gong, R.H.; Nikoukhesal, A.	Report	2416
Impact properties and microhardness of double-gated glass-reinforced polypropylene injection moldings.	Gamba, Matias Martinez; Pouzada, Antonio Sergio; Frontini, Patricia Maria	Report	4381
Improved melting strength of polypropylene by reactive compounding with ultrafine full-vulcanized polybutadiene rubber (UFBR) particles.	Liu, Yuguang; Huang, Yudong; Zhang, Chengwu; Hou, Jing; Zhang, Xuequan	Report	2551
In situ polymerization of polyamide 66 nanocomposites utilizing interfacial polycondensation. II. Sodium montmorillonite nanocomposites.	Kalkan, Zehra S.; Goettler, Lloyd A.	Report	3433
Mechanical properties of latex blends films from polystyrene particles with different sizes in a butyl acrylate-co-styrene copolymer matrix.	Herrera-Kao, Wilberth; Aguilar-Vega, Manuel	Report	4594
Numerical simulation and experimental validation of mixing performance of kneading discs in a twin screw extruder.	Zhang, Xian-Ming; Feng, Lian-Fang; Chen, Wen-Xing; Hu, Guo-Hua	Report	5019
On modeling the composition dependence of the bulk viscosity of immiscible polymer blends.	Han, Chang Dae	Report	10718
Optical properties of PMMA doped with erbium(III) and ytterbium(III) complexes.	Prajzler, Vaclav; Huttel, Ivan; Lyutakov, Oleksiy; Oswald, Jiri; Machovic, Vladimir; Jerabek, Vitezs	Report	2293
Peroxide-controlled degradation of polypropylene using a tetra-functional initiator.	Scorah, Matthew J.; Zhu, Shuihan; Psarreas, Alexander; McManus, Neil T.; Dhib, Ramdhane; Tzoganakis,	Report	3887
Physical aging of polycarbonate block copolymers: ductility rejuvenation below the glass transition temperature.	Dhara, Dibakar; Purushotham, A.; Rosenquist, Niles; Richards, William D.; Maruvada, Krishna; Chatter	Report	3992
Proposal of ultrasonic welding technique and weld performances applied to polymers.	Qiu, Jianhui; Zhang, Guohong; Wu, Yongbo	Report	2455
Rheological and molecular properties of organic peroxide induced long chain branching of recycled and virgin high density polyethylene resin.	Parmar, H.B.; Gupta, Rahul K.; Bhattacharya, S.N.	Report	4584
Rotational molding cycle time reduction using a combination of physical techniques.	Abdullah, M.Z.; Bickerton, S.; Bhattacharyya, D.; Crawford, R.J.; Harkin-Jones, E.	Report	4392
Study on physical properties of multiwalled carbon nanotube/poly(phenylene sulfide) composites.	Wu, Defeng; Wu, Lanfeng; Zhou, Weidong; Yang, Tao; Zhang, Ming	Report	5413
Sulfonation of solid polystyrene using gaseous sulfur trioxide.	Kucera, F.; Jancar, J.	Report	4394
Synthesis and characterization of open-cell foams for sound absorption with rotational molding method.	Chu, Raymond K.M.; Naguib, Hani E.; Atalla, Noureddine	Report	5413
Thermal behaviors of polystyrene plasticized with compressed carbon dioxide in a sealed system.	Yu, Long; Liu, Hongsheng; Chen, Ling	Report	4038