Articles from Polymer Engineering and Science (February 1, 2008)

Title	Author	Type	Words
A macroscopic mathematical model for tensioned-web slot coating.	Lin, Fang-Ho; Liu, Chi-Ming; Liu, Ta-Jo; Wu, Ping-Yao	Technical report	4681
A study of nano-mechanical and macro-mechanical properties of ethylene vinyl acetate.	Kim, Jaehyun; Wang, Janson; Kang, Ho-Jong; Talke, Frank	Technical report	2555
Coefficient of thermal expansion for Twaron[R] fibers using crystallographic data.	Jain, Anjana	Technical report	2701
Conventional and nanometric nucleating agents in poly([epsilon]-caprolactone) foaming: crystals vs. bubbles nucleation.	Marrazzo, Carlo; Di Maio, Ernesto; Iannace, Salvatore	Technical report	5715
Cracking formation on the surface of extruded photodegraded polypropylene plates.	Fechine, G.J.M.; Demarquette, N.R.	Technical report	3477
Electromagnetic interference shielding with polyaniline nanofibers composite coatings.	Niu, Yahua	Technical report	3096
Elongational viscosity of LDPEs and polystyrenes using entrance loss data.	Walczak, K.; Gupta, M.; Koppi, K.A.; Dooley, J.; Spalding, M.A.	Technical report	5337
Fiber orientation in injection molding with rotating flow.	Silva, Cristina A.; Viana, Julio C.; van Hattum, Ferrie W.J.; Cunha, Antonio M.	Technical report	3332
Influence of molecular weight on the electrification of linear polyethylenes during extrusion: identification of Two Different Mechanisms for Charge Generation.	Rodriguez-Gonzalez, Francisco; Perez-Gonzalez, Jose; de Vargas, Lourdes; Moreno, Edgard; Gonzalez-Sa	Technical report	5601
Interaction of thermoplastic polyurethane with polyamide 1212 and its influence on the thermal and mechanical properties of TPU/PA1212 blends.	Li, Wanli; Liu, Jinli; Hao, Chaowei; Jiang, Kai; Xu, Duanfu; Wang, Dujin	Technical report	5265
Macroscopic failure of multilayered viscoelastic polymers.	Wu, Chunhui; Mantell, Susan C.; Davidson, Jane H.	Technical report	7530
Mechanical, thermal, and morphological behavior of the polyamide 6/acrylonitrile-butadiene-styrene blends irradiated with gamma rays.	Hassan, Medhat M.	Technical report	3674
Morphology of PA-6 vibration welded joints and its effect on weld strength.	Chung, Young-Mi; Kamal, Musa R.	Technical report	4167
Numerical study of nonisothermal polymer extrusion flow with a differential viscoelastic model.	Mu, Yue; Zhao, Guoqun	Technical report	6338
Optical monitoring of polypropylene crystallization during injection molding.	Favaro, Marcia M.; Marinelli, Alessandra L.; Farah, Marcelo; Bretas, Rosario E.S.	Technical report	5370
Prediction of environmental stress cracking resistance in linear low density polyethylenes.	Maxwell, Antony S.; Pilkington, Gordon	Technical report	2860
Processability studies of silica-thermoset polymer matrix nanocomposites.	Lekakou, C.; Kontodimopoulos, I.; Murugesh, A.K.; Chen, Y.L.; Jesson, D.A.; Watts, J.F.; Smith, P.A.	Technical report	3434
Reversible thermal gelation of soft semi-crystalline polyethylene microparticles with surface interactions in squalane.	Ling, Gerald H.; Shaw, Montgomery T.	Technical report	4034
Sharkskin and oscillating melt fracture: why in slit and capillary dies and not in annular dies?	Delgadillo-Velazquez, O.; Georgiou, G.; Sentmanat, M.; Hatzikiriakos, S.G.	Technical report	4478
Structural characterization and mass transfer properties of dense segmented polyurethane membrane: influence of hard segment and soft segment crystal melting temperature.	Mondal, S.; Hu, J.L.	Technical report	4259
Synthesis and studies of the physical properties of polyaniline and polyurethane-modified epoxy composites.	Chiou, Wen-Chin; Han, Jin-Lin; Lee, Sung-Nung	Technical report	5247
Thermal residual stress development for semi-crystalline polymers in rotational molding.	Xu, H.; Bellehumeur, C.T.	Technical report	4878
Thermoplastic polyurethane elastomers based on polycarbonate diols with different soft segment molecular weight and chemical structure: mechanical and thermal properties.	Eceiza, A.; Martin, M.D.; de la Caba, K.; Kortaberria, G.; Gabilondo, N.; Corcuera, M.A.; Mondragon,	Technical report	6487
Tribological properties of blends of melamine-formaldehyde resin with low density polyethylene.	Brostow, Witold; Datashvili, Tea; Huang, Bernard	Technical report	2494
Viscoelastic evaluation of effects of fiber size and composition on cellulose-polypropylene composite of high filler content.	Ito, Hirokazu; Kumari, Rashmi; Takatani, Masahiro; Okamoto, Tadashi; Hattori, Hidehiro; Fujiyoshi, I	Technical report	4621
Weathering of recycled photo-degraded polyethylene.	Maxwell, A.S.	Technical report	2825