Articles from Polymer Engineering and Science (March 1, 2003)

Title	Author	Type	Words
A study on the use of phenoxy resins as compatibilizers of polyamide 6 (PA6) and polybutylene terephthalate (PBT).	Dharaiya, Dhawal; Jana, Sadhan C.; Shafi, Asjad		4269
All-optical switching modulation in poly(vinyl carbazole)--based azobenzene blends.	Wu, Shuizhu; Yao, Shenglan; She, Weilong; Yan, Kun; Zhao, Jianqing		2105
Comparison between five experimental methods to evaluate interfacial tension between molten polymers.	Demarquette, Nicole R.; Souza, Adriana Martinelli Catelli De; Palmer, Guillermo; Macaubas, Paulo Hen		7484
Deformation behavior of an epoxy resin subject to multiaxial loadings. Part I: experimental investigations.	Hu, Yafei; Xia, Zihui; Ellyin, Fernand		4539
Deformation behavior of an epoxy resin subject to multiaxial loadings. part II: constitutive modeling and predictions.	Kia, Zihui; Hu, Yafei; Ellyin, Fernand		5392
Essential Work of Fracture (EWF) analysis for short glass fiber reinforced and rubber toughened nylon-6.	Ching, Emma C.Y.; Li, Robert K.Y.; Tjong, Sie Chin; Mai, Yiu-Wing		4373
Improvement of the mechanical properties of an HDPE/PS blend by compatibilization and incorporation of [CaCO.sub.3].	Sahnoune, F.; Cuesta, J.M. Lopez; Crespy, A.		5708
In-situ microfiber reinforced composite based on PET and PE via slit die extrusion and hot stretching: influences of hot stretching ratio on morphology and tensile properties at a fixed composition.	Li, Zhong-Ming; Yang, Ming-Bo; Xie, Bang-Hu; Feng, Jian-Min; Huang, Rui		5316
Influence of intermolecular entanglements on crystallization behavior of ultra-high molar mass polyethylene.	Fan, Zhongyong; Wang, Yiren; Bu, Haishan		3877
Microcellular model evaluation for the deformation of dynamically vulcanized EPDM/iPP blends.	Wright, Kathryn J.; Indukuri, Kishore; Lesser, Alan J.		5483
Microstructure analysis of high performance fibers in compression.	Huh, Wansoo; Kumar, Satish; Adams, W. Wade		2224
Multiple melting behavior of syndiotactic 1,2-polybutadiene.	Sasaki, Takashi; Sunago, Hayato; Hoshikawa, Takuya		4817
Scratch visibility of polymers measured using optical imaging.	Rangarajan, P.; Sinha, M.; Watkins, V.; Harding, K.; Sparks, J.		5085
Simulation of injection-compression molding for optical media.	Fan, Bingfeng; Kazmer, David O.; Theriault, Richard P.; Poslinski, Andrew J.		5377
Synthesis and mechanical properties of unsaturated polyester based nanocomposites.	Inceoglu, A. Baran; Yilmazer, Ulku		2991
Ternary miscibility in blends of three polymers with balanced binary interactions.	Woo, E.M.; Mao, Yung-Jen; Wu, Pi-Ling; Su, Chean-Cheng		4842
The influence of power-law rheology on flow distributions in coathanger manifolds. (1).	Reid, J.D.; Campanella, O.H.; Corvalan, C.M.; Okos, M.R.		3365
Theoretical influence of polyester molecular weight distribution variation on melt viscosity during injection molding and extrusion as influenced by ester-ester interchange.	Sudduth, Richard D.		6243
Transport of aromatic solvents through nitrile rubber/epoxidized natural rubber blend membranes.	Mathai, Asha Elizabeth; Singh, R.P.; Thomas, Sabu		5201