Printer Friendly

Point/split point grinder.

The PS52 drill point and split point grinder is a multi-axis CNC grinder for 1.5 to 13 mm drills. Point angles can be ground from 80 to 140 degrees. Split points can be ground to NAS907, DIN style A, B, and C split points. The machine has three-station simultaneous operations, load/unload, point grind, and split point grind. The production rate on a 13 mm drill is about six per minute and the drill is only located once. Three vee blocks and push rods are required, so setup is fast. Normac Inc., www.rsleads.com/404tp-211

[ILLUSTRATION OMITTED]
COPYRIGHT 2004 Nelson Publishing
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2004 Gale, Cengage Learning. All rights reserved.

 Reader Opinion

Title:

Comment:



 

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:Abrasive Machining
Publication:Tooling & Production
Article Type:Brief Article
Geographic Code:1USA
Date:Apr 1, 2004
Words:99
Previous Article:MDP grinder.
Next Article:Two in one cell.
Topics:


Related Articles
Overview of abrasive-belt grinding.
Catching up to creep-feed grinding.
Creep-feed grinding: a partnershop's way.
Mori Seiki adds grinder line. (Presstime Notes).
Chapter 17: grinding methods and machines.
Fast, lean, and flexible: an overview of technology trends.
MDP grinder.
Roundup of latest, greatest: technologies, innovations found at IMTS.
Ready to wear: proper wear parts maintenance helps keep operations running smoothly.
The daily grind: asphalt shingles, drywall and wood-burning power plants spur markets for secondary grinding equipment.

Terms of use | Copyright © 2014 Farlex, Inc. | Feedback | For webmasters