|
| |
Articles
1-100 out of 100 article(s)
| Title |
Author |
Type |
Date |
Words |
| Dimensional stability of single-site ethylene copolymers in rotational molding. |
Bellehumeur, C.T.; Medina, A.; Xu, H. |
Technical report |
Jul 1, 2009 |
5751 |
| Development of epoxy/hyperbranched blends for resin transfer molding and vacuum assisted resin transfer molding applications: effect of a reactive diluent. |
Cicala, G.; Recca, G.; Carciotto, S.; Restuccia, C.L. |
Technical report |
Mar 1, 2009 |
3934 |
| Warpage-crystallinity relations in rotational molding of polypropylene. |
Glomsaker, T.; Hinrichsen, E.L.; Larsen, A.; Doshev, P.; Ommundsen, E. |
Technical report |
Mar 1, 2009 |
4093 |
| Modeling of complex parison formation in extrusion blow molding: effect of medium to large die heads and fuel tank geometry. |
Yousefi, Azizeh-Mitra; Atsbha, Haile |
Technical report |
Feb 1, 2009 |
7512 |
| Characterization and control of plastic deformation in mesoscale premolded components to realize in-mold assembled mesoscale revolute joints. |
Ananthanarayanan, Arvind; Gupta, Satyandra K.; Bruck, Hugh A. |
Technical report |
Feb 1, 2009 |
7022 |
| Analysis of mold insert fabrication for the processing of microfluidic chip. |
Shen, Y.K.; Lin, J.D.; Hong, R.H. |
Technical report |
Jan 1, 2009 |
4470 |
| A robust shock and noise model for the manufacturing of molded LDPE foams. |
Chedly, S.; Chettah, A.; Bonnefoy, H.; Ichchou, M.N. |
Technical report |
Dec 1, 2008 |
8617 |
| Modeling of heat transfer in rotational molding. |
Banerjee, S.; Yan, W.; Bhattacharyya, D. |
Technical report |
Nov 1, 2008 |
7912 |
| Prediction of residual stress and viscoelastic deformation of film insert molded parts. |
Kim, Seong Yun; Oh, Hwa Jin; Kim, Sung Ho; Kim, Chae Hwan; Lee, Seung Hwan; Youn, Jae Ryoun |
Technical report |
Sep 1, 2008 |
3186 |
| Effect of mold temperature on the long-term viscoelastic behavior of polybutylene terepthalate. |
Banik, K.; Mennig, G. |
Technical report |
May 1, 2008 |
5765 |
| Gas-assisted injection molded polypropylene: the skin-core structure. |
Zheng, Guo-Qiang; Yang, Wei; Yang, Ming-Bo; Chen, Jing-Bo; Li, Qian; Shen, Chang-Yu |
Technical report |
May 1, 2008 |
4936 |
| Characterization of new formulations for the rotational molding based on ethylene-propylene copolymer/graphite nanocomposites. |
Planes, Emilie; Duchet, Jannick; Maazouz, Abdherrahim; Gerard, Jean-Francois |
Technical report |
Apr 1, 2008 |
4023 |
| Real-time measurement of flow front kinematics using quantitative visualization in injection molding process. |
Fathi, S.; Behravesh, A.H. |
Report |
Mar 1, 2008 |
3204 |
| Thermal residual stress development for semi-crystalline polymers in rotational molding. |
Xu, H.; Bellehumeur, C.T. |
Technical report |
Feb 1, 2008 |
4878 |
| Stress-strain behavior as related to surface topography and thickness uniformity in uni- and biaxially stretched PVDF/PMMA blends. |
Zhou, Xixian; Cakmak, M. |
Technical report |
Dec 1, 2007 |
3998 |
| Rotational molding cycle time reduction through surface enhanced molds: Part A--theoretical study. |
Abdullah, M.Z.; Bickerton, S.; Bhattacharyya, D. |
|
Sep 1, 2007 |
7124 |
| Rotational molding cycle time reduction through surface-enhanced molds, Part B: experimental study. |
Abdullah, M.Z.; Bickerton, S.; Bhattacharyya, D. |
|
Sep 1, 2007 |
4898 |
| Single thermoplastic pellet molding by means of diode laser for micromolding application. |
Citrea, Isabella; Quadrini, Fabrizio |
|
Feb 1, 2007 |
3437 |
| Effects of molding conditions on transcription molding of microscale prism patterns using ultra-high-speed injection molding. |
Yokoi, H.; Han, X.; Takahashi, T.; Kim, W.K. |
|
Sep 1, 2006 |
3771 |
| Three-dimensional numerical simulation of injection molding filling of optical lens and multiscale geometry using finite element method. |
Kim, Sang-Woo; Turng, Lih-Sheng |
|
Sep 1, 2006 |
7374 |
| Effect of machine compliance on mold deflection during injection and packing of thermoplastic parts. |
Carpenter, Brian; Patil, Sachin; Hoffman, Rebecca; Lilly, Blaine; Castro, Jose |
|
Jul 1, 2006 |
4495 |
| Plastic shaping by means of IR heating and direct pellet molding. |
Quadrini, Fabrizio; Santo, Loredana; Tagliaferri, Vincenzo; Trovalusci, Federica |
|
Jul 1, 2006 |
3887 |
| Modeling of rotational molding process: multi-layer slip-flow model, phase-change, and warpage. |
Lim, K.K.; Ianakiev, A. |
|
Jul 1, 2006 |
5843 |
| Flash*. |
Chen, Zhongbao; Giacomin, A. Jeffrey; Turng, Lih-Sheng |
|
Mar 1, 2006 |
3450 |
| Properties of polypropylene/aluminum trihydroxide composites containing nanosized organoclay. |
Ristolainen, Noora; Hippi, Ulla; Seppala, Jukka; Nykanen, Antti; Ruokolainen, Janne |
|
Dec 1, 2005 |
3975 |
| A flow simulation for the epoxy casting process using a 3D finite-element method. |
Mitani, Tetsuo; Hamada, Hiroyuki |
|
Mar 1, 2005 |
5210 |
| The rotational molding of a thermotropic liquid crystalline polymer. |
Scribben, Eric; Baird, Donald |
|
Mar 1, 2005 |
8819 |
| The influence of power-law rheology on flow distributions in coathanger manifolds. (1). |
Reid, J.D.; Campanella, O.H.; Corvalan, C.M.; Okos, M.R. |
|
Mar 1, 2003 |
3365 |
| Micro molds make micro parts. |
Knights, Mikell |
|
Dec 1, 2002 |
2937 |
| How to injection mold cyclic olefin copolymers. |
Hammond, D. |
|
Nov 1, 2002 |
2470 |
| Relevance of Mold-Induced Thermal Boundary Conditions and Cavity Deformation in the Simulation of Injection Molding. |
Pantani, R.; Speranza, V.; Titomanlio, G. |
Statistical Data Included |
Nov 1, 2001 |
7680 |
| Getting Answers the Old-Fashioned Way. |
|
Brief Article |
Jul 1, 2001 |
255 |
| New Thin-Wall Technique Finds New Way to Fill Fast. |
|
Brief Article |
Jul 1, 2001 |
142 |
| Vertical Unit Gets New Technology, Adds New Size. |
|
Brief Article |
Jul 1, 2001 |
173 |
| All-Electric 3-Tonner Rolls into Action. |
|
Brief Article |
Jun 1, 2001 |
143 |
| Vertical/Vertical Press Goes All-Electric. |
|
Brief Article |
Jun 1, 2001 |
74 |
| High-Performance Package For Tiebarless Presses. |
|
Brief Article |
Jun 1, 2001 |
84 |
| Smaller Electric Press Joins Vertical Line. |
|
Brief Article |
Jun 1, 2001 |
72 |
| Benchtop Vertical Press Comes with Mold Shuttle. |
|
Brief Article |
Jun 1, 2001 |
102 |
| Heaters Clamp Tighter to Hot-Runner Nozzles. |
|
Brief Article |
Jun 1, 2001 |
89 |
| Servo Robots Get Easier to Maintain. |
|
Brief Article |
Jun 1, 2001 |
141 |
| First Adjustable-Height Air Ring Bows In. |
|
Brief Article |
Jun 1, 2001 |
90 |
| New Takeoff Chain Lasts Much Longer. |
|
Brief Article |
Jun 1, 2001 |
111 |
| One Big Bubble. |
|
Brief Article |
Jun 1, 2001 |
56 |
| Film Spreader Roll Holds Better Tolerances. |
|
Brief Article |
Jun 1, 2001 |
84 |
| Biggest CPVC Pipe Yet. |
|
Brief Article |
Jun 1, 2001 |
169 |
| Shrinkage Behavior and Optimization of Injection Molded Parts Studied by the Taguchi Method. |
CHANG, TAO C.; FAISON, ERNEST III |
Statistical Data Included |
May 1, 2001 |
4170 |
| Visual Analysis of Cavity Filling and Packing Process in Injection Molding of Thermoset Phenolic Resin by the Gate-Magnetization Method. |
OHTA, TAKASHI; YOKOI, HIDETOSHI |
|
May 1, 2001 |
4287 |
| Modeling of Structural Reaction Injection Molding Process. I. Mathematical Model. |
MALKIN, ALEXANDER YA.; KUZNETSOV, VICTOR V. |
|
May 1, 2001 |
4336 |
| Numerical Simulation of Moving Free Surface Problems in Polymer Processing Using Volume-of-Fluid Method. |
KIM, JU MIN; AHN, KYUNG HYUN; LEE, SEONG JAE; LEE, SEUNG JONG |
|
May 1, 2001 |
3972 |
| THE NEXT GENERATION OF Rotomolding Technology. |
Knights, Mikell |
|
May 1, 2001 |
1910 |
| Micromolding Sizing Up the Challenges. |
Knights, Mikell |
|
Apr 1, 2001 |
3153 |
| Just What You Need For a Hot Date. |
|
Brief Article |
Feb 1, 2001 |
57 |
| Coupled Thermo-Mechanical Analysis for Plastic Thermoforming. |
SONG, YUHUA; ZHANG, K. F.; WANG, Z. R.; DIAO, F. X.; YAN, Y. N.; ZHANG, R. J. |
|
Aug 1, 2000 |
4688 |
| Rotational Molding of Plastics: Comparison of Simulation and Experimental Results for an Axisymmetric Mold. |
OLSON, L. G.; CRAWFORD, R.; KEARNS, M.; GEIGER, N. |
|
Aug 1, 2000 |
3506 |
| Co-injection Molding: Effect of Processing on Material Distribution and Mechanical Properties of a Sandwich Molded Plate. |
SELDEN, R. |
|
May 1, 2000 |
3993 |
| Production of Injection Molding Tooling With Conformal Cooling Channels Using the Three Dimensional Printing Process. |
SACHS, EMANUEL; WYLONIS, EDWARD; ALLEN, SAMUEL; CIMA, MICHAEL; GUO, HONGLIN |
|
May 1, 2000 |
6826 |
| Three-Dimensional Simulation of Microchip Encapsulation Process. |
HAN, RUIHUA; SHI, LINHUO; GUPTA, MAHESH |
Statistical Data Included |
Mar 1, 2000 |
3997 |
| Numerical and Experimental Studies on the Ejection of Injection-Molded Plastic Products. |
WANG, H.; KABANEMI, K. K.; SALLOUM, G. |
Statistical Data Included |
Mar 1, 2000 |
6366 |
| Optimizing the Impact Strength of Rotationally Molded Parts. |
LIU, SHIH-JUNG; LAI, CHENG-CHIH; LIN, SHUN-TIEN |
Brief Article |
Feb 1, 2000 |
3465 |
| Wall Thickness Distribution in Thermoformed Food Containers Produced by a Benco Aseptic Packaging Machine. |
AYHAN, ZEHRA; ZHANG, Q. HOWARD |
|
Jan 1, 2000 |
4648 |
| Effects of the Shape of the Energy Director on Far-Field Ultrasonic Welding of Thermoplastics. |
CHUAH, YEW KHOY; CHIEN, LIANG-HAN; CHANG, B. C.; LIU, SHIH-JUNG |
Statistical Data Included |
Jan 1, 2000 |
3732 |
| New Hot-Runner Controls Come Fully Loaded. |
|
Brief Article |
Jan 1, 2000 |
215 |
| Mold Hollow Parts Faster With Water Instead of Gas. |
|
Brief Article |
Jan 1, 2000 |
156 |
| Lots of New Upgrades for Molding Simulation. |
|
Brief Article |
Jan 1, 2000 |
373 |
| Three-Stage Injection Gives Super Precision. |
|
Brief Article |
Jan 1, 2000 |
146 |
| Flexaust Co. Inc. |
|
Brief Article |
Jan 1, 2000 |
39 |
| Mold-Filling Simulation Talks Molders' Language. |
|
Brief Article |
Nov 1, 1999 |
178 |
| Dynisco HotRunners Forms PET Bottle Unit. |
|
Brief Article |
Nov 1, 1999 |
41 |
| Mixed Signals for Molders in 2nd Quarter. |
Naitove, Matthew H. |
|
Nov 1, 1999 |
936 |
| Investigation of Wave-like Flow Marks in Injection Molding: Flow Visualization and Micro-Geometry. |
TREDOUX, LOUIS; SATOH, ISAO; KUROSAKI, YASHUO |
Statistical Data Included |
Nov 1, 1999 |
4878 |
| Crystallinity and Microstructure in Injection Moldings of Isotactic Polypropylenes. Part 1: A New Approach to Modeling and Model Parameters. |
Guo, X.; Isayev, A. I.; Guo L. |
|
Oct 1, 1999 |
9892 |
| Effects of injection molding-induced morphology on the work of fracture parameters in rubber-toughened polypropylenes. |
Karger-Kocsis, J.; Mouzakis, D.E. |
|
Aug 1, 1999 |
3680 |
| Determination of the kinetic parameters of the thermal oxidative degradation of styrene/butadiene copolymers. |
Grguric, T.H.; Rek, V.; Jelcic, Z.; Hace, D.; Gomzi, Z. |
|
Aug 1, 1999 |
1356 |
| Prediction of the tensile impact behavior of injection molding samples from quasi-static data. |
Viana, J.C.; Cunha, A.M.; Billon, N. |
|
Aug 1, 1999 |
4842 |
| Thermoelastic behavior of carbon fiber/polycarbonate model composites. |
Privalko, Valery P.; Sukhorukov, Dmitry I.; Kerger-Kocsis, Jozsef |
|
Aug 1, 1999 |
3043 |
| Bubble dissolution in molten polymers and its role in rotational molding. |
Kontopoulou, M.; Vlachopoulos, J. |
|
Jul 1, 1999 |
5528 |
| Carbon black-filled immiscible blends of poly(vinylidene fluoride) and high density polyethylene: the relationship between morphology and positive and negative temperature coefficient effects. |
Feng, Jiyun; Chan, Chi-Ming |
|
Jul 1, 1999 |
4925 |
| Effects of nucleating agent and processing conditions on the mechanical, thermal, and optical properties of biaxially oriented polypropylene films. |
Yuksekkalayci, Celal; Yilmazer, Ulku; Orbey, Nese |
|
Jul 1, 1999 |
2511 |
| Integrated numerical modeling of the blow molding process. |
Laroche, D.; Kabanemi, K.K.; Pecora, L.; Diraddo, R.W. |
|
Jul 1, 1999 |
6884 |
| Reprocessing stability. |
Arnold, J.C.; Maund, B. |
|
Jul 1, 1999 |
2650 |
| Optical monitoring of polypropylene injection molding. |
Thomas, Charles L.; Bur, Anthony J. |
|
Jul 1, 1999 |
5706 |
| Processing and properties of high-temperature creep-resistant PVC plastisols. |
Horng-Jer Tai |
|
Jul 1, 1999 |
4107 |
| Rotating & shuttling molds speed EPS molding with inserts. |
Naitove, Matthew H. |
|
Jun 1, 1999 |
1067 |
| Injection molding: the next 10 years. |
Avery, Jack |
|
Jun 1, 1999 |
1846 |
| Control of part weight in injection molding of amorphous thermoplastics. |
Kamal, Musa R.; Varela, Alfredo E.; Patterson, W. Ian |
|
May 1, 1999 |
4484 |
| What's behind the chrome plate? Coinjection & gas-assist molding. |
Ogando, Joseph |
|
May 1, 1999 |
756 |
| Virtual thermoforming: ready for prime time? |
Knights, Mikell |
Cover Story |
May 1, 1999 |
2522 |
| Cycle time predictions for the rotational molding process with and without mold/part separation. |
Gogos, G.; Liu, X.; Olson, L.G. |
|
Apr 1, 1999 |
6780 |
| There's plenty of fizz in foam blow molding. |
Knights, Mikell |
|
Apr 1, 1999 |
1135 |
| Why molders love all-electric machines. |
Ogando, Joseph |
Cover Story |
Apr 1, 1999 |
2680 |
| What you can learn from shot profiles. |
McAlister, Bill |
|
Mar 1, 1999 |
2412 |
| Rotomolding finally gets some respect. |
Knights, Mikell |
|
Mar 1, 1999 |
668 |
| Fast & easy flow analysis. |
Ogando, Joseph |
|
Jan 1, 1998 |
870 |
| Can't afford rejects? Try real-time cavity-pressure control. |
Naitove, Matthew H. |
|
Dec 1, 1997 |
1164 |
| Automation & 'ovenless' molding highlight rotomolding expo. |
|
|
Dec 1, 1997 |
1630 |
| New blow molding resins: a peek at the future. |
De Gaspari, John |
Cover Story |
Dec 1, 1997 |
1867 |
| CIM data banishes rejects. |
|
|
Dec 1, 1997 |
1046 |
| Big molding gains from small-scale CIM. |
|
|
Dec 1, 1997 |
681 |
| Big shots in structural foam get even bigger. |
Ogando, Joseph |
|
Dec 1, 1997 |
458 |
|
