Printer Friendly
The Free Library
14,709,671 articles and books
Member login
User name  
Password 
 
Join us Forgot password?

Plastics cooling off.


As the weather heats up, demand and pricing for secondary plastics appears to be cooling off. However, some recyclers who handle the material note that this is typical for plastic markets.

"Generally speaking, most [grades] are going down," a plastics reclaimer re·claim  
tr.v. re·claimed, re·claim·ing, re·claims
1. To bring into or return to a suitable condition for use, as cultivation or habitation: reclaim marshlands; reclaim strip-mined land.
 based in the Midwest says. "We are optimistic op·ti·mist  
n.
1. One who usually expects a favorable outcome.

2. A believer in philosophical optimism.



op
 that some [grades] will bounce back when the weather gets cooler. The markets generally decrease in the summer."

The outlook appears a bit sunnier for engineering resins resins,
n.pl complex, insoluble, sticky substances secreted by plants. Used as astringents, antimicrobials, and antiinflammatories, and are burned as incense. Can cause oral ulcers and epidermal irritations.
 than for PET and HDPE HDPE
abbr.
high-density polyethylene
 material. "Engineering resins are staying the same or inching up a little bit," the Midwest reclaimer says. Pricing for clear polycarbonate A category of plastic materials used to make a myriad of products, including CDs and CD-ROMs.  is inching upward, however pricing for the colored material is moving in the opposite direction, he says. "It's weird."

Pricing for PET film is dropping, while polypropylene polypropylene (pŏl'ēprō`pəlēn), plastic noted for its light weight, being less dense than water; it is a polymer of propylene. It resists moisture, oils, and solvents. , both colored and natural, is staying firm, the Midwest reclaimer adds.

"Markets seem to be dropping off some," a Midwest-based dealer of commodity and industrial resins says. "Production is off with some of the big consumers. Supply is there, but demand is not there right now, causing markets to take a downturn." While he says the downturn has been slight, he admits that it has him concerned about where prices could end up. He's not too worried, however, because he says he doesn't see oil prices falling any time soon. "Plastics are going to stay pretty positive." In general, he says the markets for industrial and bottle-grade resins are "good and stable."

[GRAPHIC OMITTED]

The Midwest reclaimer, however, says supply is tight. He says one of the factors contributing to this tightness is the health of the market. "The end user market is there. Everyone gets into this business when the markets are good."

National statistics back up that claim, as the plastics industry is outperforming the overall economy despite the rise in oil prices.

A report from the Federal Reserve Bank shows production of plastic and rubber products was up 5.7 percent in April 2006 vs. the same month in 2005. This exceeds overall growth in manufacturing of 5.5 percent.

The Bureau of Labor Statistics Bureau of Labor Statistics (BLS)

A research agency of the U.S. Department of Labor; it compiles statistics on hours of work, average hourly earnings, employment and unemployment, consumer prices and many other variables.
 sees employment in the plastics sector growing by about 16 percent between 2002 and 2012, again exceeding an overall job growth forecast of less than 15 percent.

The Midwest reclaimer adds, "We can sell anything. It is just a matter of buying it right--not paying too much for it and making sure you are aware of what the market is doing."

A thermoplastics reclaimer based in the Southeast says that commodity grade recycled plastics have been more volatile than the engineering grades. "There is more of it out there," she says of the commodity grade plastics. "There is more room for buyers to put the pressure on."

She adds that polypropylene pricing has fallen "a little bit," despite being in short supply. This is inline with the forecast for virgin polypropylene pricing, which, according to according to
prep.
1. As stated or indicated by; on the authority of: according to historians.

2. In keeping with: according to instructions.

3.
 Purchasing magazine many experts suggest has peaked following a surge related to the 2005 hurricanes and a subsequent softening softening /sof·ten·ing/ (sof´en-ing) malacia.

softening

a change of consistency, with loss of firmness or hardness.
 in demand.

Moving material continues to be a problem. "The availability of transportation is tight and the prices are ridiculous," the Midwest reclaimer says. He says he's been asked to pay fuel charges of 25 percent or more.

(Additional news about plastics recycling recycling, the process of recovering and reusing waste products—from household use, manufacturing, agriculture, and business—and thereby reducing their burden on the environment.  markets is available online at www.RecyclingToday.com.)
COPYRIGHT 2006 G.I.E. Media, Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2006, Gale Group. All rights reserved. Gale Group is a Thomson Corporation Company.

 Reader Opinion

Title:

Comment:



 

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:plastic markets go down
Publication:Recycling Today
Geographic Code:1USA
Date:Jun 1, 2006
Words:552
Previous Article:Growing strong.(demand forecast of old corrugated containers)
Next Article:GreenMan posts $15 mil. loss.(TIRES)
Topics:



Related Articles
Injecting liquid silicones. (Tech Service)
Heavy-duty mold analysis. (computers in plastics industry)
Shake some energy savings out of your auxiliary equipment. (plastics industry equipment) (includes related article on motor energy efficiency law)
Crystalline resins finally yield to accurate shrink & warp simulation.
Not safe enough.(Special Report: Plant Safety)(plastics manufacturing plants)(Cover Story)
Wood-Fiber Adds Stiffness and Value To light-Tolerance Tubes.
Cooling Screw Cranks Up Foam Output.(new screw for foam extrusion from Plastic Engineering Associates Inc.)(Brief Article)(Product Announcement)
Novel Process Makes Cascade Of Clear Optical Film.(Brief Article)
They've been working on the railroad: composite RR ties could finally be on their way to becoming the next big thing in plastic lumber. They are...
Stronger markets ahead?(PLASTICS)(petrochemical plant shutdown)

Terms of use | Copyright © 2009 Farlex, Inc. | Feedback | For webmasters | Submit articles