Photo Stencil Presents Paper and Exhibits at APEX in February.Conference Provides Opportunity to Showcase Lead-Free Expertise COLORADO SPRINGS, Colo. -- Photo Stencil stencil, cutout device of oiled or shellacked tough and resistant paper, thin metal, or other material used in applying paint, dye, or ink to reproduce its design or lettering upon a surface. , the leading provider of premium stencils and additional high-end tooling for the SMT (1) (Surface Mount Technology) See surface mount. (2) (Station ManagemenT) An FDDI network management protocol that provides direct management. Only one node requires the software. SMT - Station Management assembly industry, will present a paper and exhibit at the upcoming IPC (1) (InterProcess Communication) The exchange of data between one program and another either within the same computer or over a network. It implies a protocol that guarantees a response to a request. Printed Circuits Expo, APEX and Designers Summit. The conference is at the Los Angeles Convention Center The Los Angeles Convention Center (abbreviated LACC) is a convention center in downtown Los Angeles. The LACC hosts annual events such as the Greater Los Angeles Auto Show, and was best known to video games fans as host to E3 until its cessation in 2006. in Los Angeles, California, February 18-22, 2007. Dr. Bill Coleman, vice president of technology, will present 'Lead-Free Intrusive Reflow,' an alternative to lead-free wave soldering. The paper will demonstrate successful solder joints and fillets for resistors, DIPs and pin headers for 63 mil thick and 93 mil thick PCBs with a 6 mil thick stencil. Advantages of intrusive reflow over wave solder will also be discussed. This process will be discussed in detail in a poster presentation by Coleman and co-author George Oxx of Solectron, North Carolina North Carolina, state in the SE United States. It is bordered by the Atlantic Ocean (E), South Carolina and Georgia (S), Tennessee (W), and Virginia (N). Facts and Figures Area, 52,586 sq mi (136,198 sq km). Pop. on Wednesday, February 21, from 3:30pm-4:30pm. Photo Stencil will be exhibiting at the conference at booth #2729. Coleman and Mike Burgess, vice president of Photo Stencil, will both be available at the booth to answer questions or for in-depth technical discussions. Please visit http://www.photostencil.com/techpapers.htm for access to the paper. For questions, contact Dr. Bill Coleman at 719-535-8528 or e-mail at bcoleman@photostencil.com. Photo Stencil Photo Stencil is a full-service provider of high-performance stencils and tooling for the surface mount technology (SMT) assembly industry. Photo Stencil's technology includes the patented AMTX E-FAB E-FAB Econo-functional aesthetic balance (architectural philosophy) ([R])electroformed stencils, the new high-performance proprietary NicAlloy([TM])stencil, laser-cut stencils and chem-etch stencils. Step or multilevel mul·ti·lev·el adj. Having several levels: a multilevel parking garage. Adj. 1. multilevel - of a building having more than one level stencils are available in all three of the stencil technologies. Stencil design support and customer specific design libraries are provided. Other SMT tooling includes thick film and metal mask screens. Photo Stencil offers a complete line of squeegee blades, featuring the patented E-Blade([R])electroformed squeegee blade. Solder pallets, SMT process carriers and populated PCB PCB: see polychlorinated biphenyl. PCB in full polychlorinated biphenyl Any of a class of highly stable organic compounds prepared by the reaction of chlorine with biphenyl, a two-ring compound. inspection templates are also available. Headquartered in Colorado Springs, Photo Stencil was founded in 1979 and currently holds many patents and trademarks, such as AMTX E-FAB electroform e·lec·tro·form tr.v. e·lec·tro·formed, e·lec·tro·form·ing, e·lec·tro·forms To produce or reproduce (an object) by electrodeposition on a mold. stencils. The company has additional manufacturing facilities in Mexico and Malaysia. More information is available at www.photostencil.com. APEX The IPC Printed Circuits Expo, APEX and Designers Summit provides up-to-date, accurate technical information, as well as the opportunity to interact with members of the supply chain - from design and board fabrication to assembly, test and inspection. The conference will be held at the Los Angeles Convention Center in Los Angeles, California. Conferences and meetings will be held February 18-22, and the exhibition will run February 20-22. More information about the conference is available at www.GoIPCShows.org. E-Blade, E-FAB and NicAlloy are trademarks of Photo Stencil. |
|
||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion