Peterson 5710c horizontal grinder.[ILLUSTRATION OMITTED] The 57100 is powered by a Caterpillar C27 1,050-hp engine and provides the highest power-to-weight ratio Power-to-weight ratio (specific power) is a calculation commonly applied to engines and other mobile power plants to enable the comparison of one unit (design) to another. Power-to-weight ratio is a measurement of actual performance of any engine (power plant). of any Peterson grinder Grinder A slang term for a person who works in the investment industry and makes small amounts of money at a time on small investments, over and over again. Notes: . * At 82,330 pounds, the 57100 was designed for operations requiring high production and frequent moves between jobs. * With a feed opening of 60 inches by 44 inches and Peterson's high lift feed roll, the 57100 is designed to handle a wide range of material, including stumps. * The 5710C uses Peterson's new generation of Impact Release System, which can be set in the detent mode to provide consistent product sizing or switched to the floating anvil anvil Iron block on which metal is placed for shaping, originally by hand with a hammer. The blacksmith's anvil is usually of wrought iron (sometimes of cast iron), with a smooth working surface of hardened steel. mode for a primary reduction where accurate sizing is less critical. The floating anvil mode provides a high production primary reduction with more protection from contaminated contaminated, v 1. made radioactive by the addition of small quantities of radioactive material. 2. made contaminated by adding infective or radiographic materials. 3. an infective surface or object. feedstocks and reduced fuel consumption. * The 5710C has a square-shaft rotor and large grate area that enables it to produce materials to exact specifications, according to according to prep. 1. As stated or indicated by; on the authority of: according to historians. 2. In keeping with: according to instructions. 3. a press release from the manufacturer. * The quick-change multiple grate system is designed to make it easy to customize grate configurations to produce a wide variety of finished materials. Grates are removed through an access door on the side wall. Visit www.petersoncorp.com for more information. |
|
||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion