Pelletizers and dicers.

AEC, INC.

Offers two new series of strand pelletizers: slant-cut ER series for engineering resins and Standard Series with advanced sound control.

BERINGER LLC 

WRP Water-ring pelletizing systems feature a hot-cut, water-ring die-face system that minimizes sensitivity to process conditions. Dry die-face cut and water-ring pellet quench do not freeze or slow the flow of polymer through the die. Easy start-up and low energy consumption achieved because knife assembly cuts molten polymer in air instead of cutting a semi-molten extrudate underwater or a hardened strand.

Each cutting blade individually flexes and adjusts to the die-plate surface. Centrifugal dryer removes surface water from pellets. Fast cleanout. Throughput rates from 500 to 5000 lb/hr.

BERLYN EXTRUDERS INC.

Strand pelletizers with capacities to 5000 lb/hr and underwater pelletizers with cooling and dewatering devices. Hot-face cutters with capacities to 5000 lb/hr.

BERSTROFF

Water-ring pelletizers from 50 to 16,000 lb/hr; underwater pelletizers from 6600 to 100,000 lb/hr featuring unique design for soft, difficult-to-cut, products such as PP; and hot die-face and water-spray pelletizers to PVC to 8800 lb/hr.

BLACK CLAWSON CONVERTING MACHINERY

Six models of underwater pelletizers and three models of water-ring pelletizers handle rates from 50 to 120,000 lb/hr of all types of polymer materials. Small systems for reclaim, product development, and testing. Ultra-high concentrations of pigments and very high or broad range melt indexes can be handled.

Accessories include heated and non-heated die plates, cleanable pellet dryers, temperature-control panels, water-recirculation systems, and pelletizer heating systems. Modular contruction for alternate setups, rapid disassembly and simple maintenance.

C.W. BRABENDER INSTRUMENTS INC.

Laboratory pelletizer with a revolving helical rotor capable of cutting 1-4 strands 1/8-in. long. Units has a variable strand speed of 1.5 to 49 ft/min with digital display and potentiometer, and d-c motor with electronic speed control. Mounted on casters with foot brake.

BROWN PLASTICS ENGINEERING CO., INC.

Strand pelletizers for small productions, laboratory, or school use have a 2-in. face with driven pull rolls coordinated with a driven rotor. Plain or stainless steel. Also rebuilds pelletizers.

CALIFORNIA PELLET MILL CO.

Pellet mills from 2 to 500 hp for repelletizing scrap thermoplastics. Units operate by compressing fluff between two rotating steel rollers and a multiple-hole die. Frictional heat softens material so it coheres. Pellets are cut to length by adjustable knives. Bulk density of original fluff increases four to eight times. Pellet lengths and diameters can vary. Capacities from 500 to 18,000 lb/hr.

CONAIR

Manufactures strand and horizontal-cut water-ring pelletizers and accessories. Strand pelletizers, which suit material ranging from standard grades to low-viscosity engineering resins and those with glass reinforcement, are available with rotor diam. from 6 to 12 in., widths from 4 to 32 in., and capacities from 500 to 34,000 lb/hr. T-series and S-series feature easy-access cutting chambers for simplified maintenance and cleaning. Metric series built with European drives and performance standards.

Waterslide pelletizing systems with throughput rates as high as 25,000 lb/hr use an inclined water conveyor to condition strands prior to dry or wet cutting by a strand pelletizer. Systems improve cut quality and minimize dust and fines. Units include a self-threading feature to ensure fast start-up and minimize waste and strand breakage. Strand dies, pellet dryers, classifiers, and transfer systems can be supplied with units.

Vortex Spray (hot-die pelletizer (VPS) combines performance features of existing underwater and water-ring pelletizer design with technology that improves material quality and ease of operation to a broader range of polymers, including flexible and rigid PVCs and masterbatch compounds. VSP accomplishes this by turning the cutter head 90[degrees] and achieving streamlined straight-through flow. Pellet cut is virtually insentive to extrusion conditions and die hole freeze-off does not occur. Units come complete with water recirculation tank and dryer, feature simple push-bottom startup, and are available in five sizes that can process up to 6000 lb/hr.

Region service centers ensure fast response to repair, sharpening and spare parts.

COPERION CORP.

Hot die-face pelletizers including water-ring, underwater, and air-cooled systems to fit extrusion equipment supplied by Werner & Pfleiderer and Buss.

CUMBERLAND ENGINEERING CORP.

Represents strand pelletizers from Accrapak Systems of the U.K.

D&S MANUFACTURING CO. INC.

Rotary helical pelletizers, rotary helical dicers, and stair step dicers.

Ancillary products include a line of high quality knives for use in all types of size reduction equipment. Many of the knives are manufactured from special alloys and/or special treatment to enhance knife life.

DAVIS-STANDARD CORP.

Underwater pelletizer systems from 500 to 10,000 lb/hr. Melt flow is directed through a die plate with cutting blades rotating in a vertical plane. Blades are driven by d-c scr drive. Drive shaft is aligned to maintain the blades squarely against the die-plate surface. Blades easily removed for sharpening or replacement. When reassembled, precise alignment of blades against the cutting face is said to be preserved. Complete assembly includes pelletizer and drive, spin dryer, water filtering and tempering system, and, if necessary, hot-oil system for die plates.

DAVIS-STANDARD KILLION SYSTEMS

Strand pelletizers for lab or small-scale production in bench and floor models. Feed throats up to 2 in. wide, variable-speed drive, and heavy-duty design.

DYNISCO LLC

Redesigned inline water-ring pelletizers for 10-15% higher throughputs and less noise. Model WRP-12i has throughputs up to 2600 lb/hr and Model WRP-35i up to 7700 lb/hr.

ECON GMBH

Austrian firm offers a pelletizer with a ceramic die used for the pelletizing die plate and the entire die body for high abrasion resistance and nonsticking operation.

EXACT SRL 

See IPM Ital-Plast Machinery.

FARREL CORP.

C Series underwater pelletizers from 1000 to 100,000 lb/hr process full range of polymers including LDPE, HDPE, PP and PS. Options include standard, heat-channel, and heat-exchanger pellet plates with steam or oil heating. Electric or hydraulic cutter motor. Also dry-face pelletizer for temperature-sensitive materials or polymers where water contact is to be avoided.

GALA INDUSTRIES, INC.

Underwater pelletizers produce 20 to 30,000 lb/hr. Pelletizing systems include die plate, dryer, tempered-water system, control/power panel and produce up to 12,000 lb/hr. Centrifugal dryers, sold as part of a system and separately, can dry 20 to 150,000 lb/hr. System options include polymer diverter valves, water box by-pass systems, dies (including micropellet dies), crystallization/cooling systems, self-aligning cutter hubs, quick-opening clamps, and fines removal sieves.

HENION DICING PRODUCTS LLC

Helical dicers with all related tooling and services of size-reduction.

IPM ITAL-PLAST MACHINERY

Offers film densifier from Exact srl (Italy). Unit compresses scrap film without heat into small squares.

JAPAN STEEL WORKS AMERICA, INC.

Underwater, hot-face, and strand pelletizers. Underwater pelletizer has die lined with abrasion-resistant material. Hot-face pelletizer capacities to 6600 lb/hr. Strand pelletizer throughputs to 6200 lb/hr. Strand dies incorporate polymer flow-control device. Also offers centrifugal pellet dryer.

KOBELCO STEWART BOLLING, INC.

Underwater and dry-face pelletizing systems and custom-designed strand and strip dicing lines complement company's compounding extruders.

Underwater pelletizers and screen changers in capacities to 90,000 lb/hr. Patented water-cooled tie-rod design eliminates thermal influence on knife/die-face alignment. Smooth slurry flow eliminates fines accumulating on pellets due to stagnation. Die plates employ latest alloys and patended boding techniques for maximum abrasion and corrosion resistance. Die plates with heat channel and heat-exchanger pipe maximize heating efficiency and minimize pressure loss. Die plates retrofit to any manufacturer's pelletizer. Bucket-type strainer gives large filtration area with minimum pressure drop.

KREYERBORG INDUSTRIES

Offers underwater pelletizers, gear pumps and pellet dryers.

KRUPP WERNER & PFLEIDERER

See Coperion Corp.

LCI CORP.

Supplies flat-die pellet presses from Amandus Kahl.

LEISTRITZ EXTRUDER CORP.

Hot-face pelletizers supplied only as part of complete lines.

PLASTICS EQUIPMENT MARKETING SERVICES INC.

Production and laboratory pelletizers 2 in. and larger.

POMINI

See Techint SpA.

PTI/PROCESSING TECHNOLOGIES, INC.

Trident series CPF (continuous polymer flow) water-ring pelletizers available in Models 1000S, 2000S, 3000S, 4000S and 5000S for extruders from 3 1/2- to 8-in diam. with throughputs from 1000 to 5000 lb/hr. Fully equipped units use heavy-duty, over-sized componentry throughout and are easy to set up, operate and maintain. Systems offer similar design innovations for spare-parts interchangeability.

RANDCASTLE EXTRUSION SYSTEM, INC.

Strand pelletizers include micro-pelletizer line, which makes pellets 0.02 x 0.02 in. and 0.06 x 0.06 in. for feeding small extruders in the 1/4- to 1/2-in. range. Pelletizer converts to a two-roll puller or torque winder. Cantilever design permits ready access to working components for cleaning and maintenance.

Also larger (2-in.-wide) two-function pelletizer. Both nip rolls have pneumatically adjustable pressure and are mechanically driven for pulling irregular or slippery strands. Quick-change components for fast cleaning or service. Quick-change parts also converts unit to a two-roll puller with both nip rolls driven for pulling rod, strips, tubing and profiles.

RIETER CORP. PELLETIZING MACHINERY

Strand pelletizers (conventional and self-stranding) with capacities from 100 to 33,000 lb/hr.

Conventional Primo Line is a simplified design for low cost and easy maintenance. Available in cutting widths from 50 to 300 mm and capacities in excess of 5,000 lb/hr.

Vario line comes in conventional (Vario ASG), self-stranding wet cut (Vario USG), or self-stranding dry cut (Vario ATG or Vario JSG). Machines provide automated strand start-up and rethreading during operation, minimizing waste and optimizing throughput. Available in sizes from 300 to 600 mm widths with capacities to 20,000 lb/hr.

Opto 900 self-stranding wet cut pelletizer available (like Vario USG) in horizontal or vertical configuration with cutting width of 900 mm and capacity in excess of 33,000 lh/hr.

SANDVIK PROCESS SYSTEMS, INC.

Rotoform Process continuously forms melts at up to 600 F into small drops, which solidify on a steel-belt cooler into uniform, round pastilles in sizes from 0.8 mm to 50 mm. The dust-free process offers no contact between product and cooling water, eliminating need for energy to dry pellets. Cooling water is not contaminated, and cutters are not needed, lowering energy consumption and maintenance. Process can be used for products with melt viscosities up to 80,000 cp at temperatures under 600 F.

SCHEER BAY CO.

Strand pelletizers included the SGS-E series with capacities from 2 to 3400 lb/hr and the SGS-L series with capacities from 3400 to 16,700 lb/hr. Both series offer lower noise levels, ease of maintenance, improved cleaning capability, quicker changeover and durability.

Waterslide pelletizing systems for producing thermoplastic pellets available in wet or cry cut versions. Systems offer automated start-up, rethreading of broken strands, dust-free pellets, low noise level and are custom designed. Systems are suitable for operations with reactors, autoclaves, and extruders using a strand die.

TECHINT SPA, POMINI DIV.

Three types of Pelletizing heads for use with extruders or gear pumps:

* Underwater pelletizer with outputs from 1000 to 140,000 lb/hr for polyolefins and PS. Options include heat exchanger and heat-channel pellet plates for steam or oil heating.

* Water-ring pelletizer from 1000 to 18,000 lb/hr for any grade of polyolefin-based compound and masterbatch.

* Dry-face pelletizer form 1000 to 13,000 lb/hr for thermally sensitive materials such as cable compounds, PVC, and other non-water-compatible polymers.

Hydraulically actuated slide-plate screen-changers available for any type of pelletizer or die. Turnkey, custom-designed strand or orther pelletizing lines with full automation provided.

THERMO HAAKE USA

Laboratory pelletizer is supported by a movable, welded frame on which motor control is positioned for accessibility. Bottom steel feed roll is serrated for positive grip of extrudate strands, and top rubber feed roll is adjustable. Cutting mechanism consists of multiple cutting blades on rotor. Has variable-speed drive motor and can also be controlled and monitored using PolyLub monitor software.

THERMOPLASTICS ENGINEERING CORP.

Strand pelletizers for lab and small productions come with 2-, 4- or 6-in.-wide rotors. Frames designed to the application. Interchangeable gear sets fir varying pellet lengths.

WAYNE MACHINE & DIE CO.

Yellow-Jacket heavy-duty strand pelletizers for laboratory and production applications in 2- and 3-in. models, which have eight-tooth steel straight or helical rotor. Both models feature a four-sided bed knife, which can be turned four times before requiring replacement. Other features are d-c drives from 1 1/2 to 5 hp, gear drive on rubber and knurled rollers for positive strand movement, easy clean-out, locking casters on stand, and 45[degrees] dump chute.

An option to the standard pelletizer that allows the pelletizer to produce micro-pellets as small as 0.010 in. and to continuously adjust up to 3/16-in. pellets. This is accomplished by using a master reference ratio drive system that controls the ratio of the cutter speed to the nip roller speed. Pelletizer line speed can be adusted faster or slower while maintaining constant pellet length. In this case, the drive used on the nip rollers is 1/4 hp, while the drive on the cutter remains 1.5 hp.