PANEL SIZING, BORING & EDGEBANDING.BOARD AND PANEL SIZING EQUIPMENT 1 Automatic Panel Transfers 2 Double Cutoff Saws 3 Double End Trim Saws 4 Grooving Machines 5 Mutiple Cutoff Saws 6 Panel Feeders 8 Skinner Saws 9 Slat Beds 10 Sliding Table Saws 11 Stackers AIM Tools & Accessories 4 Adwood Corp. 5,10 Allwood Machinery Inc. 1,3,4,6,11 Alpine Engineered Products Inc., PF90 Cutting Systems 3 Anthon GmbH & Co. Maschinenfabrik 6,11 Anver Corp. 11 Atlantic Fluidics Inc., Marcoly 2,3 Auto V Grooving Inc. 4 Automated Lumber Handling 1,6,11 B & B Machinery 4,6 Baker Products 2,3,5 Beane & Howard Machinery Inc. 3 Biesse America 1,5,6,10,11 Milton W. Bosley & Co. Inc. 4 Bradbury Industries 4 Burelbach Industries Corp. 1,2,3,4,5,6,9,11 Richard T. Byrnes Co. Inc. 1,2,3,5,6 CTD Machines Inc. 2,3,5 Casadei America 10 Coe Mfg. Co. (Ore.) 9,11 Coe Mfg. Co. (Ohio) 1,11 Con-Vey/Keystone Inc. 1,6,11 A. Costa SpA 1,2,3,4,5,6,11 Creative Automation Inc. 1,6,11 Danckaert Woodworking Machinery Co. 1, 5 Delmac Machinery Group 1,6,11 Delta Machinery 10 Derda Inc. 10 Dieffenbacher GmbH & Co., Maschinenfabrik 1,2,6,11 Dieffenbacher North America 2,3,6,11 Doucet Machineries Inc. 1,11 E & R System Technik Inc. 10 Ex-Factory Inc. 1,4,6,11 European Woodworking Machinery Co. 1,2,3,4,6,11 Excalibur (By Sommerville Design) 10 Fletcher Machine Co. Inc. 3,4 Giben America Inc. 1, 6, 11 Globe Machine Mfg. Co. 1,2,3,4,5,6,8,11 Group Seven Systems Inc. 11 R.K. Haskew & Co. Inc. 9 Hi-Tech Engineering Inc. 4 J.J. Hilgefort Woodworking Machinery Co. 1,2,3,4,5,6,8,9,10,11 Holz-Her Canada Inc. 10 Holz-Her US Inc. 10 IMA America Corp. 1,3,6,11 IMAL- PAL North America, Inc 2 ISCO-Industrial Service Co. 11 Integra Tooling & Acc. 2, 3 Italpresse Engineering S.P.A. 1,4,6,11 Jenkins Systems 1,2,3,5,6,8,9,11 Jones Machinery Co. 2,3,4 Jorgenson Machinery Corp. 11 Koch Ltd. Machinery & Systems 1,2,3,4,5,9 Laguna Tools 10 Lobo Machinery Corp. 2,3,4,10 Macoser Inc. 4 Mereen-Johnson Machine Co. 1,2,3,4,5,6,8,9,11 Midwest Automation 3,6,11 Multiscore Mfg. Co. 4,5 Norfield Industries 3 Northfield Foundry & Machine Co. 11 Olympic Machinery Co. 1,2,3,4,5,9,11 OMGA Inc. 2 Omga SpA 2 Panhans Machinery Co. Inc 10 Pendu Mfg. Inc. 3,11 Pickering Inc. 9 Pistorius Machine Co. 2,3,5 Powermatic Corp. 10 Production Machinery Inc. 11 Progressive Systems Inc. 1,2,3,4,5,6,8,9,11 Rapid Lumber Inc. 2,3 Raute Wood 1,4, 11 SCM GROUP USA INC. 1,6,10, 11 Schmidt Industrial Services Inc. 1,2,3,4,5,6,11 Schmutz Technology 4 Schwabedissen Maschinen Anlagen GmhH 1,2,3,4,5,6 Siempelkamp Limited Partnership 1 Solid Wood Systems Inc. 2, 3 Southworth Products Corp. 6,11 Stiles Machinery Inc. 1,3,4,6,11 Sunds Defibrator 1,2,5,6,11 Superfici USA, LLC 1,6,11 Sutton Woodworking Machine Co. 2,3,4,5,8,9 TSM Inc/Pacific Wood Technology 1,6,11 Tyler Machinery Co. Inc. 2,3,4,5 USNR Woodland, (formerly Irvington Moore) 1,6,11 U.S. Saws Co. 6 Union Tool Corp. 1,11 Unitech Industries Inc. 6,11 Wegoma Inc. 2,3,5 Michael Weinig AG 1,6,11 Wemhoner America 1,2,6,11 Western Machine Works Inc. 2,3 Henry Wiegand Co, LLC 2,3,4 Wisconsin Automated Machinery Corporation (NC) 2,3,11 Woodworkers Equipment & Machinery Co. 2,3,4,5,6,11 BORING MACHINES Also See Machines 1 Boring, CNC / Point-to-Point 2 Boring, Horizontal, Vertical 3 Boring, Multi Drill, Vertical 4 Boring, Multihead Baffle Automatic Accu-Systems, Mountain View Machinery 1 Advanced Automation 1 Adwood Corp. 1,2,3 Altendorf America, Div. of Stiles Machinery Inc. 1,2 Anderson America Corp. 1 Andreou Industries Inc. 2,3,4 Atlantic Machinery Corp. 2 AutoDrill LLC 1,2,3,4 B & B Machinery 1,2,3 Rudolf Bass Inc. 2 Bermaq, s.a. 1,2,3 Biesse America 1,2,3,4 Blackalloy Co. Of America Inc. 2,3 Julius Blum Inc., Cabinet & Furniture Hardware Mfg. 3 Bradford Dimension Specialties 2 Richard T. Byrnes Co. Inc. 1,3 CMS North America Inc. 1,2,3 Calder Wilkinson Ltd 1,2,3 California Woodworking Machinery Co. 2 Castle Inc. 2 Cemco Inc. 2,3 Dennis L Coffey Machinery Co. 2,3 Computer Router Services Inc. 2,3 Danckaert Woodworking Machinery Co. 4 Delmac Machinery Group 1,2,3 Delta Machinery 3 Denray Machine Inc. 3 Derda Inc. 2 Desoutter Inc. 2,3 Alexander Dodds Co. 2,3 Doucet Machineries Inc. 2,3 E & R System Technik Inc. 1,2 European Woodworking Machinery Co. 1,2,3 Fisch Precision Tools Inc. 1 Fletcher Machine Co. Inc. 2,3 Forest City Tool Co. 2 Friulmac 2 Goodspeed Machine Co. 2 Grass America Inc. 2,3 Hammer Machinery Co. Inc. 2 Hanger Bolt & Stud Co. 2,3 Hendrick RWH Industries Inc. 1 Hettich America L.P. 2 J.J. Hilgefort Woodworking Machinery Co. 1,2,3,4 Holz-Her Canada Inc. 1,2,3,4 Holz-Her US Inc. 1,2,3 ICBT Inc. 1,4 IMA America Corp. 1 Joos USA Inc., DBA Black Forest Machine Co. 2,3 E. Kinast Distributors 1 Koch Ltd. Machinery & Systems 1,2,3,4 Komo Machine Inc. 2,3 Kreg Tool Co. 2 Kufo Industries Corp. 2 Laguna Tools 2,3 Laminate Technologies Inc. 2,3,4 Lauderdale-Hamilton Inc. 2,3 Lobo Machinery Corp. 2,3 Longoni's Engineering 2 Louisville Woodworking Machinery Company 2 Macoser Inc. 2,3 Masterwood Group USA 1,2,3 Modular Systems Inc. 2 Monarch Machinery Inc. 2,3 MotionMaster Inc. 2 Mountain View Machinery, (see Accu-Systems) 1 ND Graphic Products 1 Nichols Machine Co. Inc. 2,3 Okaply Industries Inc. 1 Olympic Machinery Co. 2 Outwater Hardware Corp. 2, 3 Pasquier Panel Products Inc. 1,2,3,4 Pickering Inc. 1,2,3 Pistorius Machine Co. 2,3 Precision Automation 1 J.S. Richardson Co. Inc. 2 Ritter Mfg. Inc. 1,2,3 Rojatec Tooling System 3 SCM GROUP USA INC. 1,2,3,4 SL Woodworking Machinery Inc. 2,3,4 Schmidt Industrial Services Inc. 4 Selby Furniture Hardware Co. Inc. 3 Solid Wood Systems Inc. 2,3 SpecialtyTools.com 3 Standard Router Inc. 1 Stegherr Maschinenbau GmbH & Co. KG Stiles Machinery Inc. 1,2,3,4 Suhner Industrial Products Corp. 2,3 Sunhill Machinery 3 Sutton Woodworking Machine Co. 2,3,4 TSM Inc./Pacific Wood Technology 2,3,4 Tech Mark Inc. 1,2,3,4 Tekmatex Inc. 2,3,4 Thermwood Corp. 1,2,3 Tritec Assoc. Inc. 1,2,3 Tyler Machinery Co. Inc. 3 Unique Machine & Tool Co., div. of Kenlin Inc. 2,3 Weaver Mfg. & Sales Co. Inc. 3 Western Machine Works Inc. 2 Henry Wiegand Co, LLC 2,3 Wisconsin Automated Machinery Corporation (NC)1,2,3 Woodworkers Equipment & Machinery Co. 2,3,4 Woodworking Machinery Distributors USA, (By Maggi Inc.) 2,3,4 CASE CLAMPS -- Also See Clamps Adjustable Clamp Co. Atlantic Machinery Corp. B & B Machinery Rudolf Bass Inc. Biesse America Richard T. Byrnes Co. Inc. California Woodworking Machinery Co. Carlson Systems Engineering Dennis L. Coffey Machinery Co. Colt Clamp Co. Inc. European Woodworking Machinery Co. Handy Machines Div. Hess Group America Inc. Hofer Inc. Italpresse Engineering S.P.A. J.M. Lancaster Inc. Louisville Woodworking Machinery Company Mastodon Clamps, (Wade Mfg.) Monarch Machinery Inc. Mountain View Machinery, (see Accu-Systems) Olympic Machinery Co. Pistorius Machine Co. Erich Riebling Co. Inc. Ritter Mfg. Inc. SL Woodworking Machinery Inc. Schmidt Industrial Services Inc. Stiles Machinery Inc. TSM Inc/Pacific Wood Technology J.C. Uhling Products Co. Henry Wiegand Co, LLC Woodworker's Hardware & Supply Inc. Woodworkers Equipment & Machinery Co. DOWEL INSERTING Accu-Systems, Mountain View Machinery Atlantic Machinery Corp. B & B Machinery Biesse America Richard T. Byrnes Co. Inc. Delmac Machinery Group Derda Inc. Alexander Dodds Co. E & R System Technik Inc. Friulmac Jones Machinery Co. Joos USA Inc., DBA Black Forest Machine Co. Koch Ltd. Machinery & Systems Monarch Machinery Inc. Mountain View Machinery, (see Accu-Systems) SCM GROUP USA INC. SL Woodworking Machinery inc. Schmidt Industrial Services Inc. Stegherr Maschinenbau GmbH & Co. KG Stiles Machinery Inc. TSM Inc./Pacific Wood Technology Tech Mark Inc. Tritec Assoc. Inc. Woodworkers Equipment & Machinery Co. EDGEBANDERS -- Also See Gluing Equipment 1 Edgebanders, Single Sided 2 Edgebanders, Double Sided 3 Edgebanders, Softforming Adwood Corp. 1, 3 Akhurst Machinery 1 Altendorf America, Div. of Stiles Machinery Inc. 1 Anderson Manufacturing Technologies Inc. 1 Andreou Industries Inc. 1 Atlantic Machinery Corp. 1 B & B Machinery 1, 2, 3 Rudolf Bass Inc. 1 Canplast Inc. 3 Delmac Machinery Group 1, 3 Ex-Factory Inc. 1, 2, 3 Edgebanding Services Inc. 1 European Woodworking Machinery Co. 1, 2, 3 Fletcher Machine Co. Inc. 1, 2, 3 Frama Tech Inc. 1 Hafele America Co. 1 Hess Group America Inc. 1 J.J. Hilgefort Woodworking Machinery Co. 1, 2, 3 Holz-Her Canada Inc. 1 Holz-Her US Inc. 1 IMA America Corp. 1, 2, 3 E. Kinast Distributors 1 L & L Machinery Inc. 1 Laguna Tools 1 Lobo Machinery Corp. 1 Longoni's Engineering 3 Louisville Woodworking Machinery Company 1 Masterwood Group USA 1 Monarch Machinery Inc. 1, 3 Nemeth Engineering Assoc. Inc. 1 Nordson Corporation 1, 2, 3 Olon Decoratives 1 Olympic Machinery Co. 1 Outwater Plastics Industries, East Coast Sales/Warehouse 1 Pistorius Machine Co. Practical Products Co. 1 Erich Riebling Co. Inc. 1 SCM GROUP USA INC. 1, 2, 3 SL Woodworking Machinery Inc. 1, 2, 3 Schmidt Industrial Services Inc. 1, 2, 3 SpecialtyTools.com 1 Stiles Machinery Inc. 1, 2, 3 TSM Inc./Pacific Wood Technology 1, 3 Therm O Web 1 Virutex.com Corp. 1 Woodworkers Equipment & Machinery Co. 1, 3 Woodworking Machinery Distributors USA, (By Maggi Inc.) 1, 3 EDGEBANDING MATERIALS 1 Edgebanding Accessory Items 2 Edgebanding Cutters 3 Lumber Bands 4 Plastic & Other Chemically Derived Materials 5 Metallic 6 Primer 7 Thick PVC 8 Wood Veneer Advanced Technology Inc. 5 Adwood Corp. 1 Amana Tool Corp. 1, 2 American Manufacturers Supply Inc. 4, 8 Anderson Wood Products Co. 3 Arkansas Face Veneer Co. Inc. 8 Artistry In Veneers Inc. 8 Atlantic Plywood Corp., (Mass.) 3, 5, 7, 8 Atlantic Plywood Corp., (Conn.) 1, 3, 5, 6, 7, 8 Axiom Industries Inc. 1 R.S. Bacon Veneer Co. 8 Bair Marketing Inc. 4 Band-It Products/The Cloverdale Co. 2, 4, 7, 8 Bimex Inc. 2 Brookside Veneers Ltd. 8 CBT-USA Inc. 8 Canplast Inc. 1, 3, 4, 5, 8 Casco Impregnated Papers Inc. 4 Casco Nobel Inc. 4 Cedan Industries 3, 8 Chair City Supply Co. Inc. 2, 7, 8 Charter Industries 4, 7, 8 Concept Plastics Inc. 4 Courmatt International Inc. 2 Cramer Wood Products Inc. 8 D.C. Distributing 1, 4, 8 DII International 2 Dean Co. 8 Decorative Surfaces International 4 Demp's Saw & Tool Co. 2 Dollken Profiles Ltd. 7 Dover Inlay Mfg, Co. Inc. 8 Drake Corp., (Mo.) 2 Edge Craft Ltd. 3, 4, 6, 7, 8 Edge Inc. Plus 1, 4, 5, 7 Edgebanding Services Inc. 1, 2, 3, 4, 5, 6, 7, 8 EdgeCo Inc. 1, 2, 4, 7, 8 Edgemate Inc. 1, 3, 4, 7, 8 Edging Plus Inc. 4, 6, 7 FS Tool Corporation 2 Federal Plastics Ltd. 4 Fiberesin Industries Inc. 4 Fine Edge Plastics 4, 7 Fletcher Machine Co. Inc. 2 Flexible Materials Inc. 1, 3, 4, 6, 7, 8 FormWood Industries 8 Frama Tech Inc. 1, 2, 4, 8 Freud Tmm Inc. 1, 8 Gamble Brothers Inc., Div. of the Burruss Co. 3 General Saw Corp. 2 Geometric Forms 8 Hofer Inc. 8 Hoffmann Machine Co. Inc. 2 Inlaid Woodcraft Co. 8 Interforest Ltd. 8 International Components Plus Inc. 1, 2, 3, 4, 5, 7, 8 Ipir America 8 JSO Wood Products 4, 5, 7, 8 Jacaranda Inc. 8 Jowat Corp. 6 Kimberly-Clark Corp. 4 L.I. Laminates Inc. 1, 4, 8 Leitz Tooling Systems Inc. 2 Lenderink Tech. 8 Leuco Tool Corp. 2 Longoni's Engineering 8 Loti Corp. 1 M.C.T. Mfg. Inc., (formerly Markay Cutting Tools) 1, 2 Frank Morrow Co. 1, 5 NVF Company 4 Nenplas 7 North American Products Corp. 2 The October Co. Inc. 1 Olon Decoratives 1 Olon Industries Inc. 1, 4, 7, 8 Outwater Plastics Industries, East Coast Sales/Warehouse 1, 2, 4, 5, 7, 8 Guy Page & Associates Co. 4, 5, 6, 8 Panefri Industrial Co. Ltd. 1, 4, 5, 7 Patwin Plastics Inc. 7 Precision Veneer Products 8 Premier Wood Products Inc. 3 Primark Tool Group 1 Prime Wood Inc. 8 ProEdge Inc. 4 REHAU Inc. 1, 4, 7, 8 Rayner & Rinn-Scott Inc. 4, 8 Richter USA Inc. 8 Riken U.S.A. Corporation 4 SER Wood Products Corp. 1, 4, 5, 7 SL Woodworking Machinery Inc. 1 S.R. Wood Inc. 8 Saber Diamond Tools Inc. 2 Schmidt Industrial Services Inc. 1 Southeast Cabinet Supply 7, 8 Southwest Panel Products 8 Specialty Supplies Inc. 8 SpecialtyTools.com 7, 8 Superior Wood Components Inc. 3 TACC International 6 Tafisa Canada 4, 7 Tapes & Tools 1, 2, 3, 4, 5, 7, 8 TeknaForm Inc. 4, 7 Terian Wood Products 3 Therm O Web 1, 2, 4, 8 U S Wood Products 7, 8 United Silicone Inc., An Illinois Tools Works Co. 1 Veneer Technologies Inc. 8 Western Roller Corp. 1 Westlund Distributing 4, 7, 8 Weyerhaeuser Co. 8 S.R. Wood Inc. 8 Wood River Veneer 8 Woodtape 1, 2, 6, 8 Woodworker's Hardware & Supply Inc. 4, 7, 8 HINGE INSERTING Atlantic Hardware Corp. Atlantic Plywood Corp., (Conn.) Biesse America Julius Blum Inc., Cabinet & Furniture Hardware Mfg. European Woodworking Machinery Co. Ferrari America Inc. A. Ferrari SPA Grass America Inc. Hettich America L.P. Koch Ltd. Machinery & Systems Kval Machinery Co. Mepla-Alfit Inc. Outwater Hardware Corp. Pistorius Machine Co. SL Woodworking Machinery Inc. Salice America Inc. Schmidt Industrial Services Inc. Selby Furniture Hardware Co. Inc. Stiles Machinery Inc. TSM Inc./Pacific Wood Technology U S Wood Products Wood Technology Inc. Woodworker's Hardware & Supply Inc. Woodworkers Equipment & Machinery Co. PANEL SAWS --Also See Board & Panel Sizing Equipment 1 Panel Saws - Auto or Man Control 2 Panel Saws, CNC Control 3 Panel Saws, NC Control 4 Panel Saws, Digital Control A & A Saw & Mach. Sales Inc. 1 A & S Machinery Inc. 1 AIM Tools & Accessories 1 A-Pro Machinery Inc. 1, 2, 3, 4 Adwood Corp. 1, 2, 4 Akhurst Machinery 2, 3 Altendorf America, Div. of Stiles Machinery Inc. 2, 3 Andreou Industries Inc. 1 Anthon GmbH & Co. Maschinenfabrik 1, 2, 3, 4 Atlantic Machinery Corp. 1 BM Ten Machinery Inc. Biesse America 1, 2 Black & Decker (U.S.) Inc. Bradbury Industries 1 Burelbach Industries Corp. 1 Richard T. Byrnes Co. Inc. 1, 2, 3, 4 California Woodworking Machinery Co. 1, 4 Casadei America 1, 2 Coe Mfg. Co. (Ohio) 1 Colonial Saw Co. Inc. 1 Creative Automation Inc. 1 Delmac Machinery Group 3 Delta Machinery Derda Inc. 1 E & R System Technik Inc. 1, 2, 3, 4 European Woodworking Machinery Co. 2, 3 Giben America Inc. 1, 2, 3, 4 Globe Machine Mfg. Co. 1 Hendrick Manufacturing Corp. 1 Hendrick RWH Industries Inc. 1, 4 J.J. Hilgefort Woodworking Machinery Co. 1, 2, 3, 4 Hofer Inc. 1, 2, 3, 4 Holz-Her Canada Inc. 1, 2, 3, 4 Holz-Her US Inc. 1, 2, 4 Holzma=U.S., Div. of Stiles Machinery 1, 2, 3, 4 Jenkins Systems 1, 2, 3, 4 Joos USA Inc., DBA Black Forest Machine Co. 1, 2, 3, 4 E. Kinast Distributors 1 Laguna Tools 1 Lauderdale-Hamilton Inc. 1 Lobo Machinery Corp. 1, 2, 3 Louisville Woodworking Machinery Company 1, 2, 3 Macmazza SRL 1, 2, 3, 4 Mayer USA Inc. 2 Mereen-Johnson Machine Co. 1, 2, 3, 4 Mid-Oregon Industries 1 Mida U.S.A. Inc. 1 Midwest Automation 4 Modulus 2000 Machinery Inc. 1 Monarch Machinery Inc. 1, 2, 3, 4 Multiscore Mfg. Co. 1 Olympic Machinery Co. 1, 4 Matthew Opperman CO. Inc. 1 The Original Saw Co. 1 Panel Pro 1 Panhans Machinery Co. Inc. 2 Paul Saws & Systems, Koch Ltd. Machinery Systems 1, 2, 3,4 Peterson Panel Saws 1 Precision Automation 3, 4 Progressive Systems Inc. 1, 2, 3, 4 QIP Inc. 2 Ritter Mfg. Inc. 1 SCM GROUP USA INC. 1, 2, 3, 4 SL Woodworking Machinery Inc. Safety Speed Cut Mfg. Co. Inc. 1 Saw Trax Mfg. 1 Schelling America Inc. 1, 2, 3, 4 Schmidt Industrial Services Inc. 3, 4 Schwabedissen Maschinen Anlagen GmbH 1, 2, 3, 4 Simantech Inc. 1 Stiles Machinery Inc. 1, 2, 3, 4 Sunds Defibrator Loviisa Oy 3 Sunds Defibrator 1, 2 Sutton Woodworking Machine Co. 1, 2, 3, 4 TSM Inc./Pacific Wood Technology 1, 2, 3, 4 Tech Mark Inc. 1 U.S. Saws Co. 1, 2, 3, 4 Unique Machine & Tool Co., div. of Kenlin Inc. 1 Virtual Systems 2 Wadkin Ltd. 1 Western Pneumatics Inc. 1 Henry Wiegand Co, LLC 1 Wolfe Machinery Co. 1, 2, 3, 4 Woodworkers Equipment & Machinery Co. 2, 4 Woodworking Machinery Distributors USA, (By Maggi Inc.) 1 POCKET MORTISER Castle Inc. Danckaert Woodworking Machinery Co. Alexander Dodds Co. Engineering, Machining, Fabricating Inc. Kreg Tool Co. Macoser Inc. Porter-Cable Corp. Woodworkers Equipment & Machinery Co. TENONERS --Also See Machines 1 Double End Tenoners 2 Single End Tenoners Atlantic Machinery Corp. 2 Atlantic Machine Tools 2 BM Ten Machinery Inc. 2 Balestrini Renzo SpA 1, 2 Rudolf Bass Inc. 1, 2 Richard T. Byrnes Co. Inc. 1, 2 Dennis L. Coffey Machinery Co. 1 Computer Router Services Inc. 1, 2 A. Costa SpA 1, 2 Danckaert Woodworking Machinery Co. 1, 2 Delmac Machinery Group 1, 2 Derda Inc. 1, 2 E & R System Technik Inc. 2 Ex-Factory Inc. 1 European Woodworking Machinery Co. 1, 2 Fletcher Machine Co. Inc. 1, 2 Friulmac 1 Globe Machine Mfg. Co. 1, 2 J.J. Hilgefort Woodworking Machinery Co. 1, 2 IMA America Corp. 1, 2 JDS Co. 2 Jenkins Systems 1, 2 Jones Machinery Co. 1 Knops Machine Service & Mfg. LLC 1 Koch Ltd. Machinery & Systems 1, 2 Kval Machinery Co. 2 Lobo Machinery Corp. 1, 2 Louisville Woodworking Machinery Company 1, 2 Maxym Technologies 2 Mereen-Johnson Machine Co. 1, 2 Midwest Automation 1 Monarch Machinery Inc. 1, 2 Olympic Machinery Co. 1, 2 Pistorius Machine Co. 2 Progressive Systems Inc. 1, 2 SCM GROUP USA INC. 1, 2 SL Woodworking Machinery Inc. 1, 2 Schmidt Industrial Services Inc. 1, 2 Schwabedissen Maschinen Anlagen GmbH 1, 2 Solid Wood Systems Inc. 1, 2 Star-Tex Machinery Co. 2 Stiles Machinery Inc. 1, 2 Sutton Woodworking Machine Co. 1, 2 TSM Inc./Pacific Wood Technology 1, 2 Tecnolegno s.r.l 1, 2 Tekmatex Inc. 1 Tyler Machinery Co. Inc. 1 U.S. Concepts Inc. 1 Veneer Systems Inc. 1 Wadkin Ltd. 1, 2 Wadkin North America Inc. 1, 2 Henry Wiegand Co, LLC 1, 2 Wisconsin Automated Machinery Corporation (NC) 1, 2 Woodworkers Equipment & Machinery Co. 1
PANEL SIZING, BORING & EDGEBANDING
BORING MACHINE REFERENCE GUIDE
Product
Name/No. Manual Semi-Automatic Automatic
Accu-Systems/Mountain
View Machinery,
4962 S. Redwood Road,
Salt Lake City, UT 84123
Tel. 801/965-1900
FAX 801/965-3999
HVPP []
Horizontal pt to pt
H-23 Horizontal [] []
Drill & Dowel
100 Series [] []
Drill & Dowel
200-300 Series [] []
Drill & Dowel
400-500 Series [] []
Drill & Dowel
Advanced Automation,
607 Jackson,
Jasper, IN 47546
Tel. 812/481-1819
FAX 812/481-1820
GLR-P
GLR-XL
GLK
GLT
Adwood Corp.,
P.O. Box 1195,
High Point, NC 27261
Tel. 336/884-1846
FAX 336/841-6493
M-13 []
MV-23 []
M-2H []
M-22 []
M-29 []
M-35 []
KM-Group []
Dart 600 []
Alwood Alberti Inc.,
8311 Triad Dr.,
Greensboro, NC 27409
Tel. 336/665-0001
FAX 336/665-0906
Basic NC
Format 18
Format 90
INDEX
Syncro
TF 36
TF 4000
LEM
Altendorf America,
Div. of Stiles Mach.,
3965 44th St. SE,
Grand Rapids, MI 49508
Tel. 616/698-7500
FAX 616/698-9411
Weeke BP-60 []
Weeke BP-80 []
Weeke BP-85 []
NC
Product or
Name/No. Single-sided Double-sided CNC
Accu-Systems/Mountain
View Machinery,
4962 S. Redwood Road,
Salt Lake City, UT 84123
Tel. 801/965-1900
FAX 801/965-3999
HVPP [] CNC
Horizontal pt to pt
H-23 Horizontal []
Drill & Dowel
100 Series [] []
Drill & Dowel
200-300 Series [] []
Drill & Dowel
400-500 Series [] []
Drill & Dowel
Advanced Automation,
607 Jackson,
Jasper, IN 47546
Tel. 812/481-1819
FAX 812/481-1820
GLR-P [] []
GLR-XL [] []
GLK [] []
GLT [] [] []
Adwood Corp.,
P.O. Box 1195,
High Point, NC 27261
Tel. 336/884-1846
FAX 336/841-6493
M-13 []
MV-23
M-2H []
M-22 []
M-29 []
M-35 []
KM-Group []
Dart 600 []
Alwood Alberti Inc.,
8311 Triad Dr.,
Greensboro, NC 27409
Tel. 336/665-0001
FAX 336/665-0906
Basic NC
Format 18
Format 90
INDEX
Syncro
TF 36
TF 4000
LEM
Altendorf America,
Div. of Stiles Mach.,
3965 44th St. SE,
Grand Rapids, MI 49508
Tel. 616/698-7500
FAX 616/698-9411
Weeke BP-60 CNC
Weeke BP-80 CNC
Weeke BP-85 CNC
Number Storage
of Patterns Med. for
Product Stored Additional
Name/No. On-line Storage
Accu-Systems/Mountain
View Machinery,
4962 S. Redwood Road,
Salt Lake City, UT 84123
Tel. 801/965-1900
FAX 801/965-3999
HVPP Variable RAM/HD
Horizontal pt to pt
H-23 Horizontal
Drill & Dowel
100 Series
Drill & Dowel
200-300 Series
Drill & Dowel
400-500 Series
Drill & Dowel
Advanced Automation,
607 Jackson,
Jasper, IN 47546
Tel. 812/481-1819
FAX 812/481-1820
GLR-P Infinite Hard disk
Floppy disk
GLR-XL
GLK
GLT
Adwood Corp.,
P.O. Box 1195,
High Point, NC 27261
Tel. 336/884-1846
FAX 336/841-6493
M-13
MV-23
M-2H
M-22
M-29
M-35
KM-Group
Dart 600 Floppy Disk, Hard
Drive Network
Alwood Alberti Inc.,
8311 Triad Dr.,
Greensboro, NC 27409
Tel. 336/665-0001
FAX 336/665-0906
Basic NC Endless Hard disk/
Floppy/ZIP
Format 18 Endless Hard disk/
Floppy/ZIP
Format 90 Endless Hard disk/
Floppy/ZIP
INDEX Endless Hard disk/
Floppy/ZIP
Syncro Endless Hard disk/
Floppy/ZIP
TF 36 Endless Hard disk/
Floppy/ZIP
TF 4000 Endless Hard disk/
Floppy/ZIP
LEM Endless Hard disk/
Floppy/ZIP
Altendorf America,
Div. of Stiles Mach.,
3965 44th St. SE,
Grand Rapids, MI 49508
Tel. 616/698-7500
FAX 616/698-9411
Weeke BP-60 Varies Floppy disk
or hard drive
Weeke BP-80 Varies Same as above
Weeke BP-85 Varies Same as above
Product
Name/No. Vertical/Horizontal/Both
Accu-Systems/Mountain
View Machinery,
4962 S. Redwood Road,
Salt Lake City, UT 84123
Tel. 801/965-1900
FAX 801/965-3999
HVPP Hor.
Horizontal pt to pt
H-23 Horizontal Hor.
Drill & Dowel
100 Series Hor.
Drill & Dowel
200-300 Series Hor.
Drill & Dowel
400-500 Series Hor.
Drill & Dowel
Advanced Automation,
607 Jackson,
Jasper, IN 47546
Tel. 812/481-1819
FAX 812/481-1820
GLR-P Both
GLR-XL
GLK
GLT
Adwood Corp.,
P.O. Box 1195,
High Point, NC 27261
Tel. 336/884-1846
FAX 336/841-6493
M-13 Vert.
MV-23 Vert.
M-2H Vert.
M-22 Both
M-29 Both
M-35 Both
KM-Group Both
Dart 600 Both
Alwood Alberti Inc.,
8311 Triad Dr.,
Greensboro, NC 27409
Tel. 336/665-0001
FAX 336/665-0906
Basic NC Both
Format 18 Both
Format 90 Both
INDEX Both
Syncro Both
TF 36 Both
TF 4000 Both
LEM Both
Altendorf America,
Div. of Stiles Mach.,
3965 44th St. SE,
Grand Rapids, MI 49508
Tel. 616/698-7500
FAX 616/698-9411
Weeke BP-60 Both
Weeke BP-80 Both
Weeke BP-85 Both
Product
Name/No. No. of Drilling Heads No. of Spindless/Head
Accu-Systems/Mountain
View Machinery,
4962 S. Redwood Road,
Salt Lake City, UT 84123
Tel. 801/965-1900
FAX 801/965-3999
HVPP 1-2 1-2
Horizontal pt to pt
H-23 Horizontal 1-2 23
Drill & Dowel
100 Series 1 2
Drill & Dowel
200-300 Series 2-3 2-3
Drill & Dowel
400-500 Series 4-5 4-5
Drill & Dowel
Advanced Automation,
607 Jackson,
Jasper, IN 47546
Tel. 812/481-1819
FAX 812/481-1820
GLR-P up to 56 up to 8
GLR-XL up to 200 up to 16
GLK up to 400 up to 32
GLT
Adwood Corp.,
P.O. Box 1195,
High Point, NC 27261
Tel. 336/884-1846
FAX 336/841-6493
M-13 1 13
MV-23 1 23
M-2H 2 22
M-22 1 22
M-29 1 29
M-35 1 35
KM-Group up to 8 21
Dart 600 1 11
Alwood Alberti Inc.,
8311 Triad Dr.,
Greensboro, NC 27409
Tel. 336/665-0001
FAX 336/665-0906
Basic NC 2 14
Format 18 2 18
Format 90 3 27
INDEX 1 36
Syncro 2 18
TF 36 4 36
TF 4000 8 100
LEM 8 120
Altendorf America,
Div. of Stiles Mach.,
3965 44th St. SE,
Grand Rapids, MI 49508
Tel. 616/698-7500
FAX 616/698-9411
Weeke BP-60 1 10 vert.
4 horiz.
Weeke BP-80 1 11 vert.
6 horiz.
Weeke BP-85 1 11 vert.
6 horiz.
Product
Name/No. Direct Drive Belt Driven Thru-feed
Accu-Systems/Mountain
View Machinery,
4962 S. Redwood Road,
Salt Lake City, UT 84123
Tel. 801/965-1900
FAX 801/965-3999
HVPP [] []
Horizontal pt to pt
H-23 Horizontal []
Drill & Dowel
100 Series []
Drill & Dowel
200-300 Series [] []
Drill & Dowel
400-500 Series [] []
Drill & Dowel
Advanced Automation,
607 Jackson,
Jasper, IN 47546
Tel. 812/481-1819
FAX 812/481-1820
GLR-P [] []
GLR-XL [] []
GLK [] []
GLT [] []
Adwood Corp.,
P.O. Box 1195,
High Point, NC 27261
Tel. 336/884-1846
FAX 336/841-6493
M-13 []
MV-23 []
M-2H []
M-22 []
M-29 []
M-35 []
KM-Group [] []
Dart 600 []
Alwood Alberti Inc.,
8311 Triad Dr.,
Greensboro, NC 27409
Tel. 336/665-0001
FAX 336/665-0906
Basic NC [] []
Format 18 []
Format 90 []
INDEX []
Syncro [] []
TF 36 [] []
TF 4000 [] []
LEM [] []
Altendorf America,
Div. of Stiles Mach.,
3965 44th St. SE,
Grand Rapids, MI 49508
Tel. 616/698-7500
FAX 616/698-9411
Weeke BP-60 []
Weeke BP-80 []
Weeke BP-85 []
Work
Piece Size
Product Capacity
Name/No. Non thru-feed Max. & Min
Accu-Systems/Mountain
View Machinery,
4962 S. Redwood Road,
Salt Lake City, UT 84123
Tel. 801/965-1900
FAX 801/965-3999
HVPP [] 96" max, no min
Horizontal pt to pt
H-23 Horizontal []
Drill & Dowel
100 Series Custom
Drill & Dowel
200-300 Series Custom
Drill & Dowel
400-500 Series Custom
Drill & Dowel
Advanced Automation,
607 Jackson,
Jasper, IN 47546
Tel. 812/481-1819
FAX 812/481-1820
GLR-P Width: max 0.75" -67"
Thickness:
GLR-XL .25" - 4" max
Lenth: infinite
GLK
GLT
Adwood Corp.,
P.O. Box 1195,
High Point, NC 27261
Tel. 336/884-1846
FAX 336/841-6493
M-13 []
MV-23 []
M-2H []
M-22 []
M-29 []
M-35 []
KM-Group
Dart 600 2800-950mm
Alwood Alberti Inc.,
8311 Triad Dr.,
Greensboro, NC 27409
Tel. 336/665-0001
FAX 336/665-0906
Basic NC 1000mm wide
Format 18 [] 1700mm x
3000mm
Format 90 [] 1700mm x
3000mm
INDEX [] 1700mm x
3000mm
Syncro 1100mm wide
TF 36 1100mm wide
TF 4000 1100mm wide
LEM 1100mm wide
Altendorf America,
Div. of Stiles Mach.,
3965 44th St. SE,
Grand Rapids, MI 49508
Tel. 616/698-7500
FAX 616/698-9411
Weeke BP-60 2100mm x
800mm
Weeke BP-80 2750mm x
900mm
Weeke BP-85 2750mm x
900mm
Feed
Product Speed
Name/No. Max. & Min. Mirror Imaging
Accu-Systems/Mountain
View Machinery,
4962 S. Redwood Road,
Salt Lake City, UT 84123
Tel. 801/965-1900
FAX 801/965-3999
HVPP []
Horizontal pt to pt
H-23 Horizontal []
Drill & Dowel
100 Series
Drill & Dowel
200-300 Series
Drill & Dowel
400-500 Series
Drill & Dowel
Advanced Automation,
607 Jackson,
Jasper, IN 47546
Tel. 812/481-1819
FAX 812/481-1820
GLR-P 2160"/min. []
GLR-XL
GLK
GLT
Adwood Corp.,
P.O. Box 1195,
High Point, NC 27261
Tel. 336/884-1846
FAX 336/841-6493
M-13
MV-23
M-2H
M-22 []
M-29 []
M-35 []
KM-Group 200fpm []
Dart 600 75 mpm []
Alwood Alberti Inc.,
8311 Triad Dr.,
Greensboro, NC 27409
Tel. 336/665-0001
FAX 336/665-0906
Basic NC 70 mpm []
Format 18 70 mpm []
Format 90 70 mpm []
INDEX 70 mpm []
Syncro 70 mpm []
TF 36 70 mpm []
TF 4000 70 mpm []
LEM 90 mpm []
Altendorf America,
Div. of Stiles Mach.,
3965 44th St. SE,
Grand Rapids, MI 49508
Tel. 616/698-7500
FAX 616/698-9411
Weeke BP-60 60 mpm []
Weeke BP-80 60 mpm []
Weeke BP-85 60 mpm []
Product
Name/No. Quick Change Tooling 32 mm
Accu-Systems/Mountain
View Machinery,
4962 S. Redwood Road,
Salt Lake City, UT 84123
Tel. 801/965-1900
FAX 801/965-3999
HVPP [] []
Horizontal pt to pt
H-23 Horizontal
Drill & Dowel
100 Series []
Drill & Dowel
200-300 Series []
Drill & Dowel
400-500 Series []
Drill & Dowel
Advanced Automation,
607 Jackson,
Jasper, IN 47546
Tel. 812/481-1819
FAX 812/481-1820
GLR-P [] []
GLR-XL
GLK
GLT
Adwood Corp.,
P.O. Box 1195,
High Point, NC 27261
Tel. 336/884-1846
FAX 336/841-6493
M-13 []
MV-23 []
M-2H []
M-22 [] []
M-29 [] []
M-35 [] []
KM-Group [] []
Dart 600 [] []
Alwood Alberti Inc.,
8311 Triad Dr.,
Greensboro, NC 27409
Tel. 336/665-0001
FAX 336/665-0906
Basic NC []
Format 18 []
Format 90 []
INDEX []
Syncro []
TF 36 []
TF 4000 []
LEM []
Altendorf America,
Div. of Stiles Mach.,
3965 44th St. SE,
Grand Rapids, MI 49508
Tel. 616/698-7500
FAX 616/698-9411
Weeke BP-60
Weeke BP-80 []
Weeke BP-85 []
Product
Name/No. Special Features
Accu-Systems/Mountain
View Machinery,
4962 S. Redwood Road,
Salt Lake City, UT 84123
Tel. 801/965-1900
FAX 801/965-3999
HVPP Horizontal point-to-point
Horizontal pt to pt drilling and dowel inserting
wood inch or metric.
H-23 Horizontal For casegood or drawer mfg.
Drill & Dowel Multi-spindle drill and insert
up to 12 dowels in 5 seconds.
100 Series For drilling & doweling
Drill & Dowel simultaneously. Designed to fit
customer needs, inch or metric.
200-300 Series For drilling & doweling
Drill & Dowel simultaneously. Designed to fit
customer needs, inch or metric.
400-500 Series For drilling & doweling
Drill & Dowel simultaneously. Designed to fit
customer needs, inch or metric.
Advanced Automation,
607 Jackson,
Jasper, IN 47546
Tel. 812/481-1819
FAX 812/481-1820
GLR-P Material handling, mortising
(square) hardware insertion
GLR-XL bar code aggregate heads
GLK
GLT Same; ordered seq. prod.
Adwood Corp.,
P.O. Box 1195,
High Point, NC 27261
Tel. 336/884-1846
FAX 336/841-6493
M-13 Heads available on
customer specs.
MV-23 Same as above
M-2H
M-22 Pneumatic tilting head,
digital read out
M-29 Pneumatic tilting head,
digital read out
M-35 Pneumatic tilting head,
digital read out
KM-Group Auto feed-2 conversion belt
Dart 600 6 position tool changer,
9.5-hp route
Alwood Alberti Inc.,
8311 Triad Dr.,
Greensboro, NC 27409
Tel. 336/665-0001
FAX 336/665-0906
Basic NC Mechanical "Z" axis
feed through
Format 18 5 x 10 table
Mechanical "Z" axis
Format 90 5 x 10 table
Mechanical "Z" axis
INDEX Fiberoptic controls
Syncro Inverted throughfeed
point to point
TF 36 High speed throughfeed
point to point
TF 4000 High speed throughfeed
point to point
LEM High speed throughfeed
point to point
Altendorf America,
Div. of Stiles Mach.,
3965 44th St. SE,
Grand Rapids, MI 49508
Tel. 616/698-7500
FAX 616/698-9411
Weeke BP-60 Unique vacuum pod system
Windows-based control
Weeke BP-80 Unique vacuum pod system
Windows-based control
Weeke BP-85 Unique vacuum pod system
Windows-based control
automatic tool changer
Manual
Atlantic Machinery Corp.,
36 South End Plaza,
New Milford, CT 06776
Tel. 860/354-7200
Fax: 860/354-0315
Vitap Alfa 21M [] []
Vitap Alfa 21 [] []
Vitap Alfa 27 [] []
Vitap Alfa 35 [] []
Vitap Linea 42N [] []
Vitap Linea 46N [] []
Vitap Sigma [] []
Vitap Forma 63 [] []
Vitap Sigma 20 [] []
Vitap Sigma 2TO [] []
Vitap Sigma 2TA [] []
Biesse Group America,
P.O. Box 19849,
Charlotte, NC 28219-9849
Tel. 704/357-3131
FAX: 704/357-3130
Rover 20 [] [] CNC Unlimited
Rover 22 [] [] CNC Unlimited
Rover 23 [] [] CNC Unlimited
Rover 24 [] [] CNC Unlimited
Rover 27 [] [] CNC Unlimited
Rover 30S [] [] CNC Unlimited
Rover 30 L [] [] CNC Unlimited
Rover 30 XL [] [] CNC Unlimited
Rover 336L [] [] CNC Unlimited
Techno Logic [] [] CNC Unlimited
Opt.
Techno 7 [] CNC Unlimited
Opt.
Infor Techno Dowel [] CNC Unlimited
Inserters Opt.
SVBL/J Dowel [] CNC Unlimited
Inserters Opt.
Techno 2000 FDT [] [] CNC Unlimited
Opt.
Techno 2000 F [] CNC Unlimited
Opt.
Techno 2000 SDT [] CNC Unlimited
Techno 2000 S [] CNC Unlimited
Atlantic Machinery Corp.,
36 South End Plaza,
New Milford, CT 06776
Tel. 860/354-7200
Fax: 860/354-0315
Vitap Alfa 21M Both 1
Vitap Alfa 21 Both 1
Vitap Alfa 27 Both 1
Vitap Alfa 35 Both 1
Vitap Linea 42N Vert. 2
Vitap Linea 46N Vert. 2
Vitap Sigma Both 6 vert
2 Horiz.
Vitap Forma 63 Both 3
Vitap Sigma 20 Both 3+
heads
Vitap Sigma 2TO 2 hor. Up to 8
end with 9
boring to 21
spindles
Vitap Sigma 2TA Multiple each
vert.
groups
Biesse Group America,
P.O. Box 19849,
Charlotte, NC 28219-9849
Tel. 704/357-3131
FAX: 704/357-3130
Rover 20 Floppy disk, Both 1
CD-ROM,
Hard disk,
Network
Rover 22 Same Both 1
as above
Rover 23 Same Both 1
as above
Rover 24 Same Both 1
as above
Rover 27 Same Both 1
as above
Rover 30S Same Both 1
as above
Rover 30 L Same Both 1
as above
Rover 30 XL Same Both 1
as above
Rover 336L Floppy disk Both 2
Hard disk,
Network
Techno Logic Same Both max 18
as above
Techno 7 Same Both max 10
as above
Infor Techno Dowel Same Both max 18
Inserters as above
SVBL/J Dowel Same Both max 10
Inserters as above
Techno 2000 FDT Same Both max 18
as above
Techno 2000 F Same as above Both max 10
Techno 2000 SDT Same as above Both max 18
Techno 2000 S Same as above Both max 10
Belt Driven
Atlantic Machinery Corp.,
36 South End Plaza,
New Milford, CT 06776
Tel. 860/354-7200
Fax: 860/354-0315
Vitap Alfa 21M 21 []
Vitap Alfa 21 21 [] []
Vitap Alfa 27 27 [] []
Vitap Alfa 35 35 [] []
Vitap Linea 42N 21 [] []
Vitap Linea 46N 23 [] []
Vitap Sigma 26 [] []
Vitap Forma 63 21 []
Vitap Sigma 20 21 and [] []
11 + 11
split
Vitap Sigma 2TO 21 on [] []
ea. horiz.
Vitap Sigma 2TA
Biesse Group America,
P.O. Box 19849,
Charlotte, NC 28219-9849
Tel. 704/357-3131
FAX: 704/357-3130
Rover 20 10 vert. [] []
6 horiz.
Rover 22 14 vert. [] []
6 horiz.
Rover 23 10 vert. [] []
6 horiz.
Rover 24 14 vert. [] []
6 horiz.
Rover 27 20 vert. [] []
8 horiz.
(opt 29 v.
14 h.)
Rover 30S 20 vert + [] []
8 horiz.
(opt 29 v.
+ 14 h.)
Rover 30 L Same [] []
as above
Rover 30 XL Same [] []
as above
Rover 336L 26 vert [] []
8 horiz.
Techno Logic varies [] []
Techno 7 varies [] []
Infor Techno Dowel varies [] []
Inserters
SVBL/J Dowel varies [] []
Inserters
Techno 2000 FDT varies [] []
Techno 2000 F varies [] []
Techno 2000 SDT varies [] []
Techno 2000 S varies [] []
Atlantic Machinery Corp.,
36 South End Plaza,
New Milford, CT 06776
Tel. 860/354-7200
Fax: 860/354-0315
Vitap Alfa 21M 31" x 118" [] []
Vitap Alfa 21 31" x 118" [] [] []
Vitap Alfa 27 39" x 118" [] [] []
Vitap Alfa 35 51" x 118" [] [] []
Vitap Linea 42N 36" x 118" Opt. []
Vitap Linea 46N 36" x 118" Opt. []
Vitap Sigma [] []
Vitap Forma 63 51" x 118" [] [] []
Vitap Sigma 20 2000mm []
Vitap Sigma 2TO 2000mm and [] [] []
25000 mm.
Vitap Sigma 2TA 2500mm [] [] []
Biesse Group America,
P.O. Box 19849,
Charlotte, NC 28219-9849
Tel. 704/357-3131
FAX: 704/357-3130
Rover 20 X = 113.6" 2950 ipm [] [] []
Y = 37.4"
Z = 2.5"
Rover 22 X = 120.4" 3950 ipm [] [] []
Y = 41.7"
Z = 6.1"
Rover 23 X = 114.1" 2950 ipm [] [] []
Y = 51.2"
Z = 5.5"
Rover 24 X = 120.4" 3950 ipm [] [] []
Y = 51.2"
Z = 6.1"
Rover 27 X = 135.1" 2950 ipm [] [] []
Y = 51.2"
Z = 6.1"
Rover 30S X = 135.1" 2760 ipm [] [] []
Y = 64.6"
Z = 7.8"
Rover 30 L X = 174.5" 2760 ipm [] [] []
Y = 64.6"
Z = 7.8"
Rover 30 XL X = 236.3" 2760 ipm [] [] []
Y = 64.6"
Z = 7.8"
Rover 336L X = 129.9" 2950 ipm [] [] []
Y = 48"
Z = 4"
Techno Logic Max 126" x 47" [] [] []
Min 8.1" x 4"
Techno 7 Max 126" x 47" [] [] []
Min 9.9" x 4"
Infor Techno Dowel Max 126" x 47" [] [] []
Inserters Min 9.9" x 4"
SVBL/J Dowel Max 126" x 47" [] [] []
Inserters Min 9.9" x 4"
Techno 2000 FDT Max 126" x 47" [] [] []
Min 8.1" x 4"
Techno 2000 F Max 126" x 47" [] [] []
Min 9.9" x 4"
Techno 2000 SDT Same [] [] []
Techno 2000 S Same [] [] []
Atlantic Machinery Corp.,
36 South End Plaza,
New Milford, CT 06776
Tel. 860/354-7200
Fax: 860/354-0315
Vitap Alfa 21M Foot pedal operation. Al1 Vitap
drills come w/a factory guarantee
of 0.1mm accuracy on 1 meter length
Vitap Alfa 21 Pneumatic tilting head; digital
readout.
Vitap Alfa 27 Same as above
Vitap Alfa 35 Same as above
Vitap Linea 42N 90[degrees] swiveling heads
Vitap Linea 46N 90[degrees] swiveling heads
Vitap Sigma Custom heads available.
Vitap Forma 63 90[degrees] swivelling heads,
digital readout
Vitap Sigma 20 T-frame machine with 1 hor. bor.
head & 2 or more vert. depend. on
frame length
Vitap Sigma 2TO Mech. dig. readouts control vert.
pos. of the right hor. grp and all
vert. grps.
Vitap Sigma 2TA Auto. feed, 2 conv. belts, front
and side pneumatic alignment of
panels
Biesse Group America,
P.O. Box 19849,
Charlotte, NC 28219-9849
Tel. 704/357-3131
FAX: 704/357-3130
Rover 20 9-hp electrospindle ISO-30; Ride
along 3-pos. tool changer Opt. 4
pos. tool changer on the machine
side
Rover 22 Fastest machining center on the
market; 10.2-hp electrospindle
HSK-F63; Optional C-axis;
aggregates; up to 16 tool changers
Rover 23 10.5-hp electrospindle ISO-30
Optional C-axis; up to 8 tool
changers; aggregates; Digital
readouts for easy table setup.
Rover 24 Fastest machining center on the
market; 10.2-hp electrospindle
HSK-F63; Optional C-axis;
aggregates; up to 16 tool changers;
Digital readouts for easy table
setup.
Rover 27 10.2- or 13.6-hp electrospindles
HSK-F63; Optional C-axis; Up to 31
tool changers Digital readouts or
easy table setup.
Rover 30S Same as above
(up to 35 tool changers)
Rover 30 L Same as above
Rover 30 XL Same as above
Rover 336L High productivity through-feed
machining center; up to 3
electrospindles for each head.
Techno Logic Reference pins and RH fence
positioning; NC controlled for
quick setup. Quick change chucks
as option; Up to 30 panels/min
productivity.
Techno 7 Same as above
Infor Techno Dowel Same as above
Inserters
SVBL/J Dowel Same as above
Inserters
Techno 2000 FDT Linear guides with roller bearings
on all the machine axes; Reference
pins and RH fence positioning NC
controlled for quick setup; Quick
change chucks standard; Up to 30
panels/min.
Techno 2000 F Same as above
Techno 2000 SDT Same as above
Techno 2000 S Same as above
Black Forest Machine Co.,
244 Cox St., P.O. Box 376,
Roselle, NJ 07203
Tel. 908/620-3900
FAX 908/620-3901
Ayen Model [] []
EXPERT P
Ayen ECO-21 [] []
Ayen OSB-23 [] []
Ayen OSB-39 [] []
Ayen SKB-50-2 [] []
Ayen ELB-32-33 [] []
Ayen ELB-32-23D [] []
Ayen LBM 32-23 [] []
Ayen LBM 32-23D [] [] []
Ayen DB-2000 [] []
Ayen Hovert 2-46 [] []
Ayen Roland M2 [] Unlimited
Ayen Alomat Knot []
Defecting
Ayen Alomat []
Zentrum 3/1Defecting
System
Ayen Magnum []
Glue/Dowel Inserter
Julius Blum Inc.,
Hwy. 16-Lowesville,
Stanley, NC 28164
Tel. 800/438-6788 USA
Blum MINIPRESS [] []
Blum MINI DRILL [] []
CMS North America Inc.,
4095 Karona Court,
Caledonia, MI 49316
Tel. 616/698-9970 or 800/225-5267
FAX: 616/698-9730
Glotto M [] CNC Infinite
Castle Inc.,
1364 N. McDowell Blvd., #1,
Petaluma, CA 94975
Tel. 800/282-8338
TSM-20 []
TSM-35 []
LB-30 []
Cemco,
P.O. Box 118,
Whitesburg, TN 37891
Tel. 423/235-6922 or
800/664-3290
FAX 423/235-6100
Cemco VBM [] []
Cemco SBM [] []
Cemco HBM [] []
Cemco TLB [] []
Cemco SSV [] []
DMG - Delmac Machinery Group,
4322 Piedmont Parkway,
Greensboro, NC 27410
Tel. 336/854-1211
FAX 336/854-0811
Busellato [] CNC Varies
JET 2000
Busellato [] CNC Varies
JET 2000 XL
Busellato [] CNC Varies
JET 3006
Busellato JET 4002 [] CNC Varies
Busellato [] CNC Varies
JET 4002XL
Busellato Jet 6000 [] CNC Varies
Black Forest Machine Co.,
244 Cox St., P.O. Box 376,
Roselle, NJ 07203
Tel. 908/620-3900
FAX 908/620-3901
Ayen Model Both 1
EXPERT P
Ayen ECO-21 Both 1
Ayen OSB-23 Both 1
Ayen OSB-39 Both 1
Ayen SKB-50-2 Both 1 double-
sided
Ayen ELB-32-33 Vert. 1
Ayen ELB-32-23D Vert. 1
Ayen LBM 32-23 Vert. 1
Ayen LBM 32-23D Vert. 2
Ayen DB-2000 Both 1 vert.,
1 hor.
Ayen Hovert 2-46 Both 1 vert.,
1 horiz.
Ayen Roland M2 3.5" Floppy Both 26
disc
Ayen Alomat Knot Vert. 1-3
Defecting
Ayen Alomat Vert. 2
Zentrum 3/1Defecting
System
Ayen Magnum
Glue/Dowel Inserter
Julis Blum Inc.,
Hwy. 16-Lowesville,
Stanley, NC 28164
Tel. 800/438-6788 USA
Blum MINIPRESS Vert. 3
Blum MINI DRILL Vert. 1
CMS North America Inc.,
4095 Karona Court,
Caledonia, MI 49316
Tel. 616/698-9970 or 800/225-5267
FAX: 616/698-9730
Glotto M Hard drive/ Both 1
Floppy
Castle Inc.,
1364 N. McDowell Blvd., #1,
Petaluma, CA 94975
Tel. 800/282-8338
TSM-20 Horiz. 1
TSM-35 Horiz. 1
LB-30 Horiz. 1
Cemco,
P.O. Box 118,
Whitesburg, TN 37891
Tel. 423/235-6922 or
800/664-3290
FAX 423/235-6100
Cemco VBM Both. 15
Cemco SBM Vert. 22
Cemco HBM Horiz. 5-15
Cemco TLB Horiz. 1-8
Cemco SSV Horiz. 1
DMG - Delmac Machinery Group,
4322 Piedmont Parkway,
Greensboro, NC 27410
Tel. 336/854-1211
FAX 336/854-0811
Busellato Pentium, 3.5 Both 1
JET 2000 disk drive, CD
ROM disk
drive; 3.2 GB
hard drive
Busellato Same as above Both 1
JET 2000 XL
Busellato Same as above Both 1
JET 3006
Busellato JET 4002 Same as above Both 1
Busellato Same as above Both 1
JET 4002XL
Busellato Jet 6000 Same as above Both 1
Black Forest Machine Co.,
244 Cox St., P.O. Box 376,
Roselle, NJ 07203
Tel. 908/620-3900
FAX 908/620-3901
Ayen Model 9
EXPERT P
Ayen ECO-21 21
Ayen OSB-23 23
Ayen OSB-39 39
Ayen SKB-50-2 25 ea.
side, 50
total
Ayen ELB-32-33 23 []
Ayen ELB-32-23D 23 []
Ayen LBM 32-23 23 []
Ayen LBM 32-23D 46 []
Ayen DB-2000 23 per
head
Ayen Hovert 2-46 46
Ayen Roland M2 26 [] []
Ayen Alomat Knot 1 []
Defecting
Ayen Alomat 2 []
Zentrum 3/1Defecting
System
Ayen Magnum
Glue/Dowel Inserter
Julis Blum Inc.,
Hwy. 16-Lowesville,
Stanley, NC 28164
Tel. 800/438-6788 USA
Blum MINIPRESS 5 on A & []
B, 8 on C
Blum MINI DRILL 5 []
CMS North America Inc.,
4095 Karona Court,
Caledonia, MI 49316
Tel. 616/698-9970 or 800/225-5267
FAX: 616/698-9730
Glotto M 20 Vert. [] []
8 Horiz.
Castle Inc.,
1364 N. McDowell Blvd., #1,
Petaluma, CA 94975
Tel. 800/282-8338
TSM-20 1 []
TSM-35 1 []
LB-30 30 []
Cemco,
P.O. Box 118,
Whitesburg, TN 37891
Tel. 423/235-6922 or
800/664-3290
FAX 423/235-6100
Cemco VBM 1-5 [] [] []
Cemco SBM 1 [] []
Cemco HBM 1-5 [] []
Cemco TLB 1-5 [] []
Cemco SSV 1-5 [] []
DMG - Delmac Machinery Group,
4322 Piedmont Parkway,
Greensboro, NC 27410
Tel. 336/854-1211
FAX 336/854-0811
Busellato Up to 12 []
JET 2000
Busellato Up to 12 []
JET 2000 XL
Busellato Up to 17 []
JET 3006
Busellato JET 4002 Up to 21 []
Busellato Up to 21 []
JET 4002XL
Busellato Jet 6000 Up to 28 []
Black Forest Machine Co.,
244 Cox St., P.O. Box 376,
Roselle, NJ 07203
Tel. 908/620-3900
FAX 908/620-3901
Ayen Model []
EXPERT P
Ayen ECO-21 []
Ayen OSB-23 []
Ayen OSB-39 []
Ayen SKB-50-2 []
Ayen ELB-32-33 []
Ayen ELB-32-23D []
Ayen LBM 32-23 []
Ayen LBM 32-23D []
Ayen DB-2000 []
Ayen Hovert 2-46 [] []
Ayen Roland M2 150 fpm [] []
Ayen Alomat Knot []
Defecting
Ayen Alomat []
Zentrum 3/1Defecting
System
Ayen Magnum
Glue/Dowel Inserter
Julis Blum Inc.,
Hwy. 16-Lowesville,
Stanley, NC 28164
Tel. 800/438-6788 USA
Blum MINIPRESS For all []
standard
doors and
end panels
Blum MINI DRILL Hinges []
CMS North America Inc.,
4095 Karona Court,
Caledonia, MI 49316
Tel. 616/698-9970 or 800/225-5267
FAX: 616/698-9730
Glotto M 126 in. x 61 in. 2,952 ipm [] []
x 7.8 in.
Castle Inc.,
1364 N. McDowell Blvd., #1,
Petaluma, CA 94975
Tel. 800/282-8338
TSM-20
TSM-35
LB-30
Cemco,
P.O. Box 118,
Whitesburg, TN 37891
Tel. 423/235-6922 or
800/664-3290
FAX 423/235-6100
Cemco VBM 3" - 120" 0-30 []
Cemco SBM 3" - 120" 0-30 []
Cemco HBM 3" - 120" 0-30 []
Cemco TLB 3" - 66" 0-30 []
Cemco SSV 3" - 24" 0-30 []
DMG - Delmac Machinery Group,
4322 Piedmont Parkway,
Greensboro, NC 27410
Tel. 336/854-1211
FAX 336/854-0811
Busellato Max. 102 x 70 mt/min [] []
JET 2000 39 x 7"
Busellato Max. 112x 80 mt/min [] []
JET 2000 XL 39 x 7"
Busellato Max. 120 x 70 mt/min [] []
JET 3006 48 x 7.5"
Busellato JET 4002 Max. 138 x 70 mt/min [] []
51 x 7.5"
Busellato Max. 177 x 70 mt/min [] []
JET 4002XL 51 x 7.5"
Busellato Jet 6000 Max 126 x 115mt/min [] []
63 x 6"
Black Forest Machine Co.,
244 Cox St., P.O. Box 376,
Roselle, NJ 07203
Tel. 908/620-3900
FAX 908/620-3901
Ayen Model []
EXPERT P
Ayen ECO-21 []
Ayen OSB-23 []
Ayen OSB-39 []
Ayen SKB-50-2 []
Ayen ELB-32-33 []
Ayen ELB-32-23D []
Ayen LBM 32-23 []
Ayen LBM 32-23D []
Ayen DB-2000 []
Ayen Hovert 2-46
Ayen Roland M2
Ayen Alomat Knot
Defecting
Ayen Alomat
Zentrum 3/1Defecting
System
Ayen Magnum
Glue/Dowel Inserter
Julis Blum Inc.,
Hwy. 16-Lowesville,
Stanley, NC 28164
Tel. 800/438-6788 USA
Blum MINIPRESS []
Blum MINI DRILL []
CMS North America Inc.,
4095 Karona Court,
Caledonia, MI 49316
Tel. 616/698-9970 or 800/225-5267
FAX: 616/698-9730
Glotto M []
Castle Inc.,
1364 N. McDowell Blvd., #1,
Petaluma, CA 94975
Tel. 800/282-8338
TSM-20 []
TSM-35 []
LB-30 []
Cemco,
P.O. Box 118,
Whitesburg, TN 37891
Tel. 423/235-6922 or
800/664-3290
FAX 423/235-6100
Cemco VBM []
Cemco SBM
Cemco HBM
Cemco TLB
Cemco SSV
DMG - Delmac Machinery Group,
4322 Piedmont Parkway,
Greensboro, NC 27410
Tel. 336/854-1211
FAX 336/854-0811
Busellato
JET 2000
Busellato
JET 2000 XL
Busellato
JET 3006
Busellato JET 4002
Busellato
JET 4002XL
Busellato Jet 6000
Black Forest Machine Co.,
244 Cox St., P.O. Box 376,
Roselle, NJ 07203
Tel. 908/620-3900
FAX 908/620-3901
Ayen Model Shuttling drill head allows
EXPERT P drilling of holes in 9 spindle
grouping, gives an effective
width of 27 spindles.
Ayen ECO-21 Low cost, high production
vert/horiz/ angle borer.
Ayen OSB-23 Vert/horiz/angle/
mitre boring
Ayen OSB-39 Designed for drilling vert/
horiz/angle in very deep
cabinets
Ayen SKB-50-2 Double-sided swivel
gear box; dowel drill on
one side--shell hole drills
on the other side.
Ayen ELB-32-33 Shuttle head design for
quick placement of various
lines of holes.
Ayen ELB-32-23D Dbl head of shuttle
design for dbl row line
production drilling
Ayen LBM 32-23 Production line and KD
hole drilling.
Ayen LBM 32-23D Production dbl. head,
shuttle design for KD and
line hole drilling.
Ayen DB-2000 For drilling horiz. and vert.
in one cycle to meet needs
of many KD fittings.
Ayen Hovert 2-46 For drilling horiz/vert angle
in one cycle for high vol.
KD and dowel drilling.
Ayen Roland M2 Full CNC boring, routing,
grooving.
Ayen Alomat Knot Defects knots, marsup to
Defecting 35mm, Inserts glue, plugs
Ayen Alomat Defects knots, mars, sap
Zentrum 3/1Defecting streaks, pitch pockets via
System inserting of glue and plugs
Ayen Magnum Glue and dowel inserting
Glue/Dowel Inserter 6/8mm and 8/10mm.
Julis Blum Inc.,
Hwy. 16-Lowesville,
Stanley, NC 28164
Tel. 800/438-6788 USA
Blum MINIPRESS For hinge drilling and
inserting, 2 doors per
minute, 32 mm line boring
with 7 spindles for end
panel drilling. Low cost,
high production machine.
Blum MINI DRILL For drilling holes for con-
cealed hinges, three spindle
machine boring -no insertion
CMS North America Inc.,
4095 Karona Court,
Caledonia, MI 49316
Tel. 616/698-9970 or 800/225-5267
FAX: 616/698-9730
Glotto M Automatic tool changer; 8-
pos. magazine; enclosed;
4th axis, 360[degrees], multiple
aggregate positioning;
Fanuc controller
Castle Inc.,
1364 N. McDowell Blvd., #1,
Petaluma, CA 94975
Tel. 800/282-8338
TSM-20
TSM-35
LB-30
Cemco,
P.O. Box 118,
Whitesburg, TN 37891
Tel. 423/235-6922 or
800/664-3290
FAX 423/235-6100
Cemco VBM Template system.
Cemco SBM Template system.
Cemco HBM Fixed center heads
Cemco TLB Drill fence.
Cemco SSV Fixed center heads.
DMG - Delmac Machinery Group,
4322 Piedmont Parkway,
Greensboro, NC 27410
Tel. 336/854-1211
FAX 336/854-0811
Busellato Fixed arm CNC workcenter
JET 2000 available with rotary tool
changer, saw, horizontal
routing, barcoding
Busellato Same as above
JET 2000 XL
Busellato Same as above
JET 3006
Busellato JET 4002 Same as above
Busellato Same as above
JET 4002XL
Busellato Jet 6000 Same as above
Busellato [] CNC
Jet 6000 XL
Busellato [] CNC
6000 XXL
Busellato [] CNC
JET 7000
Busellato [] CNC
JET 7000 XL
Busellato [] CNC
JET 7000 XXL
Delta International Machinery Corp.,
4825 Highway 45 N.,
Jackson, TN 38305
Tel. 800-438-2486 or 901/668-8600
FAX 901/664-0525
Delta Line Boring [] [] []
Machines
Alexander Dodds Co.,
3000 Walkent Drive N.W.,
Grand Rapids, MI 49544
Tel. 616/784-6000
BD-15 [] []
B-15F Boring [] []
Doucet Machineries,
340 6th Street,
Daveluyville, QUE, Canada G0Z 1C0
Tel. 819/367-2633
FAX 819/367-2100
Sicotte J3H [] []
Sicotte J3H-A [] []
Sicotte J20 [] [] []
Sicotte J30 [] [] []
Sicotte J35 [] []
Sicotte J40 [] [] []
Sicotte J45 [] []
Sicotte J85-A [] []
Sicotte J85-M [] [] []
Sicotte J125 [] [] [] [] []
Sicotte Airbor 700 [] []
Sicotte Airbor 730 [] [] []
Sicotte Airbor 735 [] [] []
Sicotte Airbor 750 [] []
Sicotte Airbor 800 [] [] [] []
Sicotte Airbor 900 []
Sicotte Airbor 950 []
Sicotte T-1000 [] [] []
Sicotte T-1050 [] [] []
Evans Machinery Inc.,
5530 N. 51st Ave.,
Glendale, AZ 85301
Tel. 623/934-7294
FAX 623/934-7384
Multiple Spindle [] [] [] []
#0600 [] []
#0650 [] []
Ferrari America,
P.O. Box 2144,
High Point, NC 27261
Tel. 800/664-4872
FAX 800/406-2224
Ferrari Formula [] [] NC
Grass America Inc.,
1202 Hwy. 66 S., P.O. Box 1019,
Kernersville, NC 27284
Tel. 800/334-3512
Grass Ecopress [] [] []
Grass 6036 Ram [] []
6036 Boring Machine [] []
6036 Press []
Hammer Machinery Co. Inc.,
P.O. Box 1393,
Santa Rosa, CA 95402-1393
Tel. 800/654-9184
FAX 707/542-0415
#301 [] []
Hendrick RWH Industries Inc.,
36 Commercial St.,
Salem, MA 01970
Tel. 978/741-3600
FAX 978/744-0242
Hendrick [] CNC
Busellato Varies Same as above Both
Jet 6000 XL
Busellato Varies Same as above Both
6000 XXL
Busellato Varies Same as above Both
JET 7000
Busellato Varies Same as above Both
JET 7000 XL
Busellato Varies Same as above Both
JET 7000 XXL
Delta International Machinery Corp.,
4825 Highway 45 N.,
Jackson, TN 38305
Tel. 800-438-2486 or 901/668-8600
FAX 901/664-0525
Delta Line Boring V
Machines
Alexander Dodds Co.,
3000 Walkent Drive N.W.,
Grand Rapids, MI 49544
Tel. 616/784-6000
BD-15 Hor.
B-15F Boring Hor.
Doucet Machineries,
340 6th Street,
Daveluyville, QUE, Canada G0Z 1C0
Tel. 819/367-2633
FAX 819/367-2100
Sicotte J3H V
Sicotte J3H-A V
Sicotte J20 H
Sicotte J30 V
Sicotte J35 B
Sicotte J40 B
Sicotte J45 V
Sicotte J85-A V
Sicotte J85-M V
Sicotte J125 H
Sicotte Airbor 700 V
Sicotte Airbor 730 V
Sicotte Airbor 735 B
Sicotte Airbor 750 H
Sicotte Airbor 800 H
Sicotte Airbor 900 B
Sicotte Airbor 950
Sicotte T-1000 V
Sicotte T-1050 H
Evans Machinery Inc.,
5530 N. 51st Ave.,
Glendale, AZ 85301
Tel. 623/934-7294
FAX 623/934-7384
Multiple Spindle Both
#0600 Hor.
#0650 Hor.
Ferrari America,
P.O. Box 2144,
High Point, NC 27261
Tel. 800/664-4872
FAX 800/406-2224
Ferrari Formula Both
Grass America Inc.,
1202 Hwy. 66 S., P.O. Box 1019,
Kernersville, NC 27284
Tel. 800/334-3512
Grass Ecopress Vert.
Grass 6036 Ram
6036 Boring Machine Vert.
Hammer Machinery Co. Inc.,
P.O. Box 1393,
Santa Rosa, CA 95402-1393
Tel. 800/654-9184
FAX 707/542-0415
#301 Hor.
Hendrick RWH Industries Inc.,
36 Commercial St.,
Salem, MA 01970
Tel. 978/741-3600
FAX 978/744-0242
Hendrick Infinite Both
Busellato 1 Up to 28 []
Jet 6000 XL
Busellato 1 Up to 28 []
6000 XXL
Busellato 1 Up to 38 []
JET 7000
Busellato 1 Up to 38 []
JET 7000 XL
Busellato 1 Up to 38 []
JET 7000 XXL
Delta International Machinery Corp.,
4825 Highway 45 N.,
Jackson, TN 38305
Tel. 800-438-2486 or 901/668-8600
FAX 901/664-0525
Delta Line Boring 1 13 [] []
Machines
Alexander Dodds Co.,
3000 Walkent Drive N.W.,
Grand Rapids, MI 49544
Tel. 616/784-6000
BD-15 1 13 []
B-15F Boring 1 13 []
Doucet Machineries,
340 6th Street,
Daveluyville, QUE, Canada G0Z 1C0
Tel. 819/367-2633
FAX 819/367-2100
Sicotte J3H AR AR []
Sicotte J3H-A AR AR []
Sicotte J20 AR AR []
Sicotte J30 AR AR [] []
Sicotte J35 AR AR []
Sicotte J40 AR AR []
Sicotte J45 AR AR []
Sicotte J85-A AR AR []
Sicotte J85-M AR AR []
Sicotte J125 1 1 []
Sicotte Airbor 700 AR AR []
Sicotte Airbor 730 AR AR [] []
Sicotte Airbor 735 AR AR []
Sicotte Airbor 750 AR AR []
Sicotte Airbor 800 2 AR []
Sicotte Airbor 900 4 AR [] []
Sicotte Airbor 950 [] []
Sicotte T-1000 1 AR []
Sicotte T-1050 1 AR []
Evans Machinery Inc.,
5530 N. 51st Ave.,
Glendale, AZ 85301
Tel. 623/934-7294
FAX 623/934-7384
Multiple Spindle Varies 1 [] []
#0600 1 1 []
#0650 1 2 []
Ferrari America,
P.O. Box 2144,
High Point, NC 27261
Tel. 800/664-4872
FAX 800/406-2224
Ferrari Formula 1 3 [] []
Grass America Inc.,
1202 Hwy. 66 S., P.O. Box 1019,
Kernersville, NC 27284
Tel. 800/334-3512
Grass Ecopress 2 Varies []
Grass 6036 Ram []
6036 Boring Machine 1 8 []
[]
Hammer Machinery Co. Inc.,
P.O. Box 1393,
Santa Rosa, CA 95402-1393
Tel. 800/654-9184
FAX 707/542-0415
#301 1 1 [] []
Hendrick RWH Industries Inc.,
36 Commercial St.,
Salem, MA 01970
Tel. 978/741-3600
FAX 978/744-0242
Hendrick Up to 10 Multiple AC
Busellato Max 181 x
Jet 6000 XL 63 x 6"
Busellato 220 x 63 x 6
6000 XXL
Busellato 149 x 71 x 10"
JET 7000
Busellato 189 x 71 x 10"
JET 7000 XL
Busellato 228 x 71 x 10"
JET 7000 XXL
Delta International Machinery Corp.,
4825 Highway 45 N.,
Jackson, TN 38305
Tel. 800-438-2486 or 901/668-8600
FAX 901/664-0525
Delta Line Boring
Machines
Alexander Dodds Co.,
3000 Walkent Drive N.W.,
Grand Rapids, MI 49544
Tel. 616/784-6000
BD-15 [] 1-3/4" - 15"
top to bottom/
6"-4" side-to-
side/ 7"-28"
front to back
B-15F Boring [] 1-3/4" - 8"
top to bottom/
6"-40" side-to-
side/ 7"-28"
front to back
Doucet Machineries,
340 6th Street,
Daveluyville, QUE, Canada G0Z 1C0
Tel. 819/367-2633
FAX 819/367-2100
Sicotte J3H [] Unlim.
Sicotte J3H-A [] Unlim.
Sicotte J20 [] Unlim.
Sicotte J30 [] Unlim.
Sicotte J35 [] Unlim.
Sicotte J40 [] Unlim.
Sicotte J45 [] 28" x 22"
Sicotte J85-A [] Unlim.
Sicotte J85-M [] Unlim.
Sicotte J125 [] Unlim.
Sicotte Airbor 700 [] Unlim.
Sicotte Airbor 730 [] Unlim.
Sicotte Airbor 735 [] Unlim.
Sicotte Airbor 750 [] Unlim.
Sicotte Airbor 800 [] Unlim.
Sicotte Airbor 900 [] Unlim.
Sicotte Airbor 950 Unlim.
Sicotte T-1000 [] Unlim.
Sicotte T-1050 [] Unlim.
Evans Machinery Inc.,
5530 N. 51st Ave.,
Glendale, AZ 85301
Tel. 623/934-7294
FAX 623/934-7384
Multiple Spindle [] Varies
#0600 [] Variable
#0650 [] Variable
Ferrari America,
P.O. Box 2144,
High Point, NC 27261
Tel. 800/664-4872
FAX 800/406-2224
Ferrari Formula
Grass America Inc.,
1202 Hwy. 66 S., P.O. Box 1019,
Kernersville, NC 27284
Tel. 800/334-3512
Grass Ecopress All std. door &
side panels
Grass 6036 Ram
6036 Boring Machine
Hammer Machinery Co. Inc.,
P.O. Box 1393,
Santa Rosa, CA 95402-1393
Tel. 800/654-9184
FAX 707/542-0415
#301 2" max.
3/8" min.
Hendrick RWH Industries Inc.,
36 Commercial St.,
Salem, MA 01970
Tel. 978/741-3600
FAX 978/744-0242
Hendrick [] Custom
Busellato 115mt/min [] []
Jet 6000 XL
Busellato 115mt/min [] []
6000 XXL
Busellato 100mt/min [] []
JET 7000
Busellato 100mt/min [] []
JET 7000 XL
Busellato 100mt/min [] []
JET 7000 XXL
Delta International Machinery Corp.,
4825 Highway 45 N.,
Jackson, TN 38305
Tel. 800-438-2486 or 901/668-8600
FAX 901/664-0525
Delta Line Boring Variable (oper-
Machines ator controlled)
Alexander Dodds Co.,
3000 Walkent Drive N.W.,
Grand Rapids, MI 49544
Tel. 616/784-6000
BD-15 [] []
B-15F Boring [] []
Doucet Machineries,
340 6th Street,
Daveluyville, QUE, Canada G0Z 1C0
Tel. 819/367-2633
FAX 819/367-2100
Sicotte J3H Var. [] []
Sicotte J3H-A Var.
Sicotte J20 Var. [] []
Sicotte J30 Var. [] []
Sicotte J35 Var. [] []
Sicotte J40 Var. [] []
Sicotte J45 Var. [] []
Sicotte J85-A Var. [] []
Sicotte J85-M Var. [] []
Sicotte J125 Var. [] []
Sicotte Airbor 700 Var. [] []
Sicotte Airbor 730 Var. [] []
Sicotte Airbor 735 Var. [] []
Sicotte Airbor 750 Var. [] []
Sicotte Airbor 800 Var. [] []
Sicotte Airbor 900 Var. [] []
Sicotte Airbor 950 Var. [] []
Sicotte T-1000 Var. [] []
Sicotte T-1050 Var. [] []
Evans Machinery Inc.,
5530 N. 51st Ave.,
Glendale, AZ 85301
Tel. 623/934-7294
FAX 623/934-7384
Multiple Spindle Varies [] []
#0600 2 sec/piece
#0650 See above
Ferrari America,
P.O. Box 2144,
High Point, NC 27261
Tel. 800/664-4872
FAX 800/406-2224
Ferrari Formula 4-6 scs [] []
Grass America Inc.,
1202 Hwy. 66 S., P.O. Box 1019,
Kernersville, NC 27284
Tel. 800/334-3512
Grass Ecopress Pre-set at []
factory
Grass 6036 Ram
6036 Boring Machine
Hammer Machinery Co. Inc.,
P.O. Box 1393,
Santa Rosa, CA 95402-1393
Tel. 800/654-9184
FAX 707/542-0415
#301 Adj. to suit
cust. needs
Hendrick RWH Industries Inc.,
36 Commercial St.,
Salem, MA 01970
Tel. 978/741-3600
FAX 978/744-0242
Hendrick 600-800 ipm [] [] []
Busellato Same as above, plus router
Jet 6000 XL table
Busellato Same as above
6000 XXL
Busellato Same as above
JET 7000
Busellato Same as above
JET 7000 XL
Busellato Same as above
JET 7000 XXL
Delta International Machinery Corp.,
4825 Highway 45 N.,
Jackson, TN 38305
Tel. 800-438-2486 or 901/668-8600
FAX 901/664-0525
Delta Line Boring Manual or pneumatic
Machines models. Made in USA
Alexander Dodds Co.,
3000 Walkent Drive N.W.,
Grand Rapids, MI 49544
Tel. 616/784-6000
BD-15 Automatic cutter feed;
automatic giue system;
cleaning; fast set up
B-15F Boring Bores range of drawer/
casegood materials;
easy set up;
designed for custom &
short production runs
Doucet Machineries,
340 6th Street,
Daveluyville, QUE, Canada G0Z 1C0
Tel. 819/367-2633
FAX 819/367-2100
Sicotte J3H Hydraulic
Sicotte J3H-A Comp. angle, hyd self feed.
Sicotte J20 Hydraulic doors/windows
Sicotte J30 Hydraulic, fixed table
Sicotte J35 Hydraulic
Sicotte J40 Hydraulic
Sicotte J45 Hydraulic spindle. Compound
angle chair seats.
Sicotte J85-A Auto, dovetailer/drawer front
Sicotte J85-M Man, dovetailer/drawer front
Sicotte J125 Deep drilling
Sicotte Airbor 700 Air over oil
Sicotte Airbor 730 Air over oil; fixed table
Sicotte Airbor 735 Air over oil
Sicotte Airbor 750 Air over oil
Sicotte Airbor 800 DE boring, chucking
Sicotte Airbor 900 Cleat boring
Sicotte Airbor 950 Cleat saw
Sicotte T-1000 Pneumatic
Sicotte T-1050 Pneumatic
Evans Machinery Inc.,
5530 N. 51st Ave.,
Glendale, AZ 85301
Tel. 623/934-7294
FAX 623/934-7384
Multiple Spindle
#0600 Face frames for cabinets
#0650 See above
Ferrari America,
P.O. Box 2144,
High Point, NC 27261
Tel. 800/664-4872
FAX 800/406-2224
Ferrari Formula
Grass America Inc.,
1202 Hwy. 66 S., P.O. Box 1019,
Kernersville, NC 27284
Tel. 800/334-3512
Grass Ecopress Patterns stored online: 6
drilling and insertion
machine for frameless
hinge, frame hinge, straight
baseplate, wing baseplate,
32mm line boring.
Grass 6036 Ram Handles all standard and
large drawer parts for
Zargen slides.
6036 Boring Machine Same as 6036 Ram.
Same as 6036 Ram.
Hammer Machinery Co. Inc.,
P.O. Box 1393,
Santa Rosa, CA 95402-1393
Tel. 800/654-9184
FAX 707/542-0415
#301 One touch actuator.
Hendrick RWH Industries Inc.,
36 Commercial St.,
Salem, MA 01970
Tel. 978/741-3600
FAX 978/744-0242
Hendrick Avail. w/ routing spindles,
saw spindle (90[degrees] swivel) &
horiz. boring shaping. AC
servo motor/encoder.
Holz-Her,
5120 Westinghouse Blvd.,
Charlotte, NC 28273
Tel. 704/587-3400
FAX 704/587-3419
OMAI 1300S [] CNC Unlimited
ECOMASTER [] [] CNC Unlimited
UNIMASTER [] [] CNC Unlimited
MULTIMASTER [] [] CNC Unlimited
IMA America Corp.,
P.O. Box 90068,
Raleigh, NC 27675
Tel. 919/484-3130
FAX 919/484-2131
NOTTMEYER [] [] NA
KOMET SUPER
SP/N-1
IMA Bima 210 [] [] Unlimited
IMA Bima 410/410V [] [] Unlimited
IMA BIMA [] [] Unlimited
610/610V
IMA BIMA [] [] Unlimited
810/810V
Koch Ltd. Machinery +
Systems Ltd.,
300 Lake Ridge Dr., S.E.,
Smyrna, GA 30082-5246
Tel. 678/444-5000
FAX 678/444-5100
Koch BD-B [] [] Poss.
Centronic [] [] CNC Hard
Koch BL-G [] Poss.
Koch SPRINT-PTP [] [] CNC
Pade NS 21 [] [] NC Unltd.
Koch BL-51-NC [] [] []
Komo Machine Inc.,
11 Industrial Blvd.,
Sauk Rapids, MN 56379
Tel. 320/252-9887 or
800/643-5089
FAX 320/656-2471
Mach One Innova [] CNC Unlimited
508
Mach One Innova [] CNC Unlimited
510
Kreg Tool Co.,
201 Campus Dr.,
Huxley, IA 50124
Tel. 800/447-8638
FAX 949/474-0150
#R1 []
#K2 []
#K-200 []
#K-2000 []
#DK-100 []
#DK 1100 []
Laguna Tools,
17101 Murphy Ave.,
Irive, CA 92614
Tel. 800/234-1976 or
949/474-1200
FAX 949/474-0150
MESA m21 [] []
MESA m42 [] []
Lobo Machinery Corp.,
9034 Bermudez St.,
Pico Rivera, CA 90660
Tel. 562/949-3747
FAX 562/948-4171
BR-2732 [] []
BR-21U40 [] []
BR-25 [] []
BR-312UV []
BR-406UH []
BR-054 [] []
BR-306 [] []
BR-233 [] []
Macoser Woodworking Machinery,
P.O. Box 667789,
Charlotte, NC 28266
Tel. 704/392-0110
FAX 704/394-0410
Locatelli [] [] [] []
Caselli []
Caselli []
Caselli []
Holz-Her,
5120 Westinghouse Blvd.,
Charlotte, NC 28273
Tel. 704/587-3400
FAX 704/587-3419
OMAI 1300S Floppy Horiz. 1
ECOMASTER Floppy, Hard Both 2
Drive System
Network
UNIMASTER Same as Both 3
above
MULTIMASTER Same as Both 3
above
IMA America Corp.,
P.O. Box 90068,
Raleigh, NC 27675
Tel. 919/484-3130
FAX 919/484-2131
NOTTMRYRT Floppy Both Up to 20
KOMRY DUPRT or
DP/N-1 more if
required
IMA Bima 210 Hard drive or Both 3
system network
IMA Bima 410/410V Hard drive or Both 3
system network
IMA BIMA Hard drive or Both 3
610/610V system network
IMA BIMA Hard drive or Both 3
810/810V system network
Koch Ltd. Machinery +
Systems Ltd.,
300 Lake Ridge Dr., S.E.,
Smyrna, GA 30082-5246
Tel. 678/444-5000
FAX 678/444-5100
Koch BD-B Floppy disk Both As reqd
Centtronic Floppy & hard Both 1
Koch BL-G Floppy & hard Both As reqd.
Koch SPRINT-PTP Floppy disk Both 1
Pade NS 21 Both 1 horiz.
vert; As
required
Koch BL-51-NC Floppy disk Horiz. As reqd
Komo Machine Inc.,
11 Industrial Blvd.,
Sauk Rapids, MN 56379
Tel. 320/252-9887 or
800/643-5089
FAX 320/656-5471
Mach One Innova Hard drive Both 1
508
Mach One Innova Hard drive Both 1
510
Kreg Tool Co.,
201 Campus Dr.,
Huxley, IA 50124
Tel. 800/447-8638
FAX 949/474-0150
#R1 Vert.
#K2 Vert.
#K-200 Vert. 1
#K-2000 Vert.
#DK-100 Horiz. 1
#DK 1100 Horiz 1
Laguna Tools,
17101 Murphy Ave.,
Irive, CA 92614
Tel. 800/234-1976 or
949/474-1200
FAX 949/477-0150
MESA m21 Both 21
MESA m42 Vert. 42
Lobo Machinery Corp.,
9034 Bermudez St.,
Pico Rivera, CA 90660
Tel. 562/949-3747
FAX 562/948-4171
BR-2732 Both 27
BR-21U40 Both 61
BR-25 Hor. Var.
BR-312UV Vert. 12-20
BR-406UH Hor. 12-20
BR-054 Hor. 8-36
BR-306 Vert. 16-40
BR-233 Both 20-40
Macoser Woodworking Machinery,
P.O. Box 667789,
Charlotte, NC 28266
Tel. 704/392-0110
FAX 704/394-0410
Locatelli Both
Caselli
Caselli
Caselli
Holz-Her,
5120 Westinghouse Blvd.,
Charlotte, NC 28273
Tel. 704/587-3400
FAX 704/587-3419
OMAI 1300S 1 []
ECOMASTER 9V,2H [] []
UNIMASTER 11V,4H [] []
MULTIMASTER 15V,4H [] []
IMA America Corp.,
P.O. Box 90068,
Raleigh, NC 27675
Tel. 919/484-3130
FAX 919/484-2131
NOTTMRYRT 11 or 13; [] []
KOMRY DUPRT Special
DP/N-1 configuration if
required
IMA Bima 210 14 vert. [] []
6 horiz.
IMA Bima 410/410V 20 vert. [] []
6 horiz.
IMA BIMA As per [] []
610/610V application
IMA BIMA As per [] []
810/810V application
Koch Ltd. Machinery +
Systems Ltd.,
300 Lake Ridge Dr., S.E.,
Smyrna, GA 30082-5246
Tel. 678/444-5000
FAX 678/444-5100
Koch BD-B As reqd [] []
Centtronic As reqd [] []
Koch BL-G As reqd [] []
Koch SPRINT-PTP 1 []
Pade NS 21 As reqd [] []
Koch BL-51-NC As redq []
Komo Machine Inc.,
11 Industrial Blvd.,
Sauk Rapids, MN 56379
Tel. 320/252-9887 or
800/643-5089
FAX 320/656-5471
Mach One Innova 11 [] []
508
Mach One Innova 11 [] []
510
Kreg Tool Co.,
201 Campus Dr.,
Huxley, IA 50124
Tel. 800/447-8638
FAX 949/474-0150
#R1
#K2
#K-200 1 []
#K-2000
#DK-100 1 []
#DK 1100 1 []
Laguna Tools,
17101 Murphy Ave.,
Irive, CA 92614
Tel. 800/234-1976 or
949/474-1200
FAX 949/477-0150
MESA m21 [] []
MESA m42 [] []
Lobo Machinery Corp.,
9034 Bermudez St.,
Pico Rivera, CA 90660
Tel. 562/949-3747
FAX 562/948-4171
BR-2732 27 []
BR-21U40 61 []
BR-25 1 []
BR-312UV 3-4 []
BR-406UH 2-4 []
BR-054 8-36 []
BR-306 16-40 []
BR-233 2-8 []
Macoser Woodworking Machinery,
P.O. Box 667789,
Charlotte, NC 28266
Tel. 704/392-0110
FAX 704/394-0410
Locatelli
Caselli
Caselli
Caselli
Holz-Her,
5120 Westinghouse Blvd.,
Charlotte, NC 28273
Tel. 704/587-3400
FAX 704/587-3419
OMAI 1300S 1300mm []
ECOMASTER 49" x 106" Variable [] []
UNIMASTER 57" x 126" Variable [] []
MULTIMASTER 64" x 141" Variable [] []
IMA America Corp.,
P.O. Box 90068,
Raleigh, NC 27675
Tel. 919/484-3130
FAX 919/484-2131
NOTTMRYRT max 3000 x 33 panels/
KOMRY DUPRT 1000; min. minute []
DP/N-1 250x200mm
IMA Bima 210 min 150x150mm NA [] NA
max 1200mm
x5000mm
IMA Bima 410/410V min 150x150mm NA [] NA
max 1400 mm
x6000mm
IMA BIMA min 150x150mm NA [] NA
610/610V max 1600mm
x6000mm
IMA BIMA min 150x150mm NA [] NA
810/810V max 1800mm
x6000mm
Koch Ltd. Machinery +
Systems Ltd.,
300 Lake Ridge Dr., S.E.,
Smyrna, GA 30082-5246
Tel. 678/444-5000
FAX 678/444-5100
Koch BD-B Panels & rails []
Centtronic Rails []
Koch BL-G Rails (no []
Panels)
Koch SPRINT-PTP Panels [] []
Pade NS 21 to 8 ft.
Koch BL-51-NC Stiles/rails [] []
Komo Machine Inc.,
11 Industrial Blvd.,
Sauk Rapids, MN 56379
Tel. 320/252-9887 or
800/643-5089
FAX 320/656-5471
Mach One Innova 60" x 96" 0-1250 ipm [] []
508
Mach One Innova 60" x 120" 0-1250 ipm [] []
510
Kreg Tool Co.,
201 Campus Dr.,
Huxley, IA 50124
Tel. 800/447-8638
FAX 949/474-0150
#R1
#K2
#K-200
#K-2000
#DK-100
#DK 1100
Laguna Tools,
17101 Murphy Ave.,
Irive, CA 92614
Tel. 800/234-1976 or
949/474-1200
FAX 949/477-0150
MESA m21 Samll or big opt.
MESA m42 Any size opt.
Lobo Machinery Corp.,
9034 Bermudez St.,
Pico Rivera, CA 90660
Tel. 562/949-3747
FAX 562/948-4171
BR-2732 []
BR-21U40 Max 26 x 63" []
BR-25 []
BR-312UV Max 37" long []
BR-406UH Max 36 x 48" []
BR-054 Max 72" long []
BR-306 Max 36 x 72" []
BR-233 Max 86" long []
Macoser Woodworking Machinery,
P.O. Box 667789,
Charlotte, NC 28266
Tel. 704/392-0110
FAX 704/394-0410
Locatelli
Caselli
Caselli
Caselli
Holz-Her,
5120 Westinghouse Blvd.,
Charlotte, NC 28273
Tel. 704/587-3400
FAX 704/587-3419
OMAI 1300S Horizontal CNC, drill, glue &
dowel Insertion
ECOMASTER [] Routing w/ tool changer;
X/Y Saw, drilling, 4 zones,
multiple tables
UNIMASTER [] Routing w/ tool changer,
X/Y Saw, drilling 4 zones,
multiple tables
MULTIMASTER [] Routing w/ tool changer,
X/Y Saw, drilling, dual
shuttle tables.
IMA America Corp.,
P.O. Box 90068,
Raleigh, NC 27675
Tel. 919/484-3130
FAX 919/484-2131
NOTTMRYRT
KOMRY DUPRT [] Dowel insertion, heavy
DP/N-1 machine frame w/ linear
guides in all axes to ensure
long term accuracy.
IMA Bima 210 [] Sizing, routing, grooving,
tool changer, LED quick
setup system
IMA Bima 410/410V [] Sizing, routing, grooving, tool
changer, edgebanding LED
quick setup system
IMA BIMA [] Sizing, routing, grooving, tool
610/610V changer, edgebandling LED
quick setup system, fully
automatic setup table.
IMA BIMA [] sizing, routing, grooving, tool
810/810V changer, edgebanding LED
quick setup system, fully
automatic setup table.
Koch Ltd. Machinery +
Systems Ltd.,
300 Lake Ridge Dr., S.E.,
Smyrna, GA 30082-5246
Tel. 678/444-5000
FAX 678/444-5100
Koch BD-B [] Boring, gluing, dowell inserting,
edge boring, optional trimming
Centtronic Boring, gluing, dowel
inserting, edge boring
Koch BL-G Edge boring, vertical boring
tirm saws are available.
Koch SPRINT-PTP [] Opt. vertical boring
Pade NS 21 Trimming & boring
standard.
Koch BL-51-NC [] Boring and dowelling for
door
Komo Machine Inc.,
11 Industrial Blvd.,
Sauk Rapids, MN 56379
Tel. 320/252-9887 or
800/643-5089
FAX 320/656-5471
Mach One Innova [] Flow-through nested-base
508 manufacturing
Mach One Innova [] Flow-through nested-base
510 manufacturing
Kreg Tool Co.,
201 Campus Dr.,
Huxley, IA 50124
Tel. 800/447-8638
FAX 949/474-0150
#R1 Portable pocket boring, jig
#K2 Pocket boring machine.
#K-200 Pocket hole machine with
automatic clamping.
#K-2000 Pocket hole boring jig.
#DK-100 Pocket boring machine w/
#DK 1100 Pneumatic boring motor.
Laguna Tools,
17101 Murphy Ave.,
Irive, CA 92614
Tel. 800/234-1976 or
949/474-1200
FAX 949/477-0150
MESA m21 []
MESA m42 []
Lobo Machinery Corp.,
9034 Bermudez St.,
Pico Rivera, CA 90660
Tel. 562/949-3747
FAX 562/948-4171
BR-2732 []
BR-21U40
BR-25
BR-312UV Universal position drill
BR-406UH Universal position drill
BR-054 Hyd. pump Strock
BR-306 Hyd. pump Strock
BR-233 Uni. degree drill
Macoser Woodworking Machinery,
P.O. Box 667789,
Charlotte, NC 28266
Tel. 704/392-0110
FAX 704/394-0410
Locatelli []
Caselli Chair seat boring, top,
bottom
Caselli Chair legs, boring
Caselli Chair legs, crimping
Manual
Masterwood Group USA,
6601 North Park Blvd., Ste. E,
Charlotte, NC 28216
Tel. 704/921-9994
FAX 704/921-9930
K21 [] []
K23 [] []
K29 [] []
K39 [] []
Speedy 207 [] CNC
[]
Winner 2.45L [] CNC
PRIMA [] CNC
Winner 2.45 [] CNC
Winner 3.2 [] CNC
Project 323 [] CNC
Atlas [] CNC
J.S. Richardson Co. Inc.,
Clark Street,
Sheboygan Falls, WI 53085
Tel. 414/467-4655
FAX 414/467-4656
SAB [] []
LB [] [] []
XA [] []
Ritter Mfg. Inc.,
1300-B W. 4th St.,
Antioch, CA 94509
Tel. 510/757-7296
R-130 [] []
R-131 [] []
R-800 [] []
R-125 [] []
R-160 [] []
R-160-100 [] [] []
R-113 [] []
R-23 [] []
R-46 [] []
R-46VH [] []
R-150 [] []
R-132 [] []
R-42 [] []
SCM GROUP USA,
2475 Satellite Blvd.,
Duluth, GA 30096
Tel. 770/813-8818
FAX 770/813-8819
SCM Tech 80 STC [] CNC
SCM Tech 99L [] CNC
Morbidelli Author [] CNC
427S
Morbidelli Author [] CNC
600KS
Morbidelli Author [] CNC
600KLS
Morbidelll Author [] CNC
800
Morbidelll Zenith [] NC
SL Woodworking Machinery Inc.,
1427-C Boulder Ct.,
Greensboro, NC 27409
Tel. 336/294-9024
FAX 336/294-9496
SL DM 039 PA 7-P [] []
Schmidt Industrial Services Inc.,
P.O. Box 60193,
Fort Meyers, FL 33906-6193
Tel. 941/275-7117
Lehbrink WL 357 [] [] [] []
Series
Lehbrink 358 WL [] [] [] [] []
Series
Lehbrink WL 360 [] [] [] [] []
Series
Lehbrink WL 95 [] []
Masterwood Group USA,
6601 North Park Blvd., Ste. E,
Charlotte, NC 28216
Tel. 704/921-9994
FAX 704/921-9930
K21
K23
K29
K39
Speedy 207 Unlimited Floppy
Winner 2.45L Unlimited Hard drive,
floppy, network
PRIMA Unlimited Hard drive,
floppy, network
Winner 2.45 Unlimited Hard drive,
floppy, network
Winner 3.2 Unlimited Hard drive,
floppy, network
Project 323 Unlimited Hard drive,
floppy, network
Atlas Unlimited Hard drive,
floppy, network
J.S. Richardson Co. Inc.,
Clark Street,
Sheboygan Falls, WI 53085
Tel. 414/467-4655
FAX 414/467-4656
SAB
LB
XA
Ritter Mfg. Inc.,
1300-B W. 4th St.,
Antioch, CA 94509
Tel. 510/757-7296
R-130
R-131
R-800
R-125
R-160
R-160-100
R-113
R-23
R-46
R-46VH
R-150
R-132
R-42
SCM GROUP USA,
2475 Satellite Blvd.,
Duluth, GA 30096
FAX 770/813-8819
Tel. 770/813-8818
SCM Tech 80 STC Infinite LAN, Disc,
Patterns Hard Drive
SCM Tech 99L Inf. Patterns Same as above
Morbidelli Author Inf. Patterns Same as above
427S
Morbidelli Author Inf. Patterns Same as above
600KS
Morbidelli Author Inf. Patterns Same as above
600KLS
Morbidelll Author Inf. Patterns Same as above
800
Morbidelll Zenith Inf. Patterns Same as above
SL Woodworking Machinery Inc.,
1427-C Boulder Ct.,
Greensboro, NC 27409
Tel. 336/294-9024
FAX 336/294-9496
SL DM 039 DA 7-P
Schmidt Industrial Services Inc.,
P.O. Box 60193,
Fort Meyers, FL 33906-61
Tel. 941/275-7117
Lehbrink WL 357 Variable
Series
Lehbrink 358 WL
Series
Lehbrink WL 360
Series
Lehbrink WL 95
Masterwood Group USA,
6601 North Park Blvd., Ste. E,
Charlotte, NC 28216
Tel. 704/921-9994
FAX 704/921-9930
K21 Both 1 21 []
K23 Both 1 23 []
K29 Both 1 29 []
K39 Both 1 39 []
Speedy 207 Both 1 3 vert []
2 horiz
Winner 2.45L Both 1 10 vert []
6 horiz
PRIMA Both 1 10 vert []
3 horiz
Winner 2.45 Both 1 10 vert []
6 horiz
Winner 3.2 Both 1 10 vert []
6 horiz
Project 323 Both 1 25 []
[]
Atlas Both 1 6 []
J.S. Richardson Co. Inc.,
Clark Street,
Sheboygan Falls, WI 53085
Tel. 414/467-4655
FAX 414/467-4656
SAB Vert. 1 1 []
LB Hor. 1 1 []
XA Both 2H; 1 [] []
multi V
Ritter Mfg. Inc.,
1300-B W. 4th St.,
Antioch, CA 94509
Tel. 510/757-7296
R-130 Horiz. 1 1 []
R-131 Horiz. 1 3 []
R-800 Horiz. 2 2 []
R-125 Horiz. 1 34 []
R-160 Horiz. 4 1 []
R-160-100 Horiz. 10 1 []
R-113 Vert. 1 13 []
R-23 Vert. 1 23 []
R-46 Vert. 2 23 []
R-46VH Both 2 23 []
R-150 Vert. 2 75 []
R-132 Horiz. 1 3 []
R-42 Vert. 2 23 []
SCM GROUP USA,
2475 Satellite Blvd.,
Duluth, GA 30096
FAX 770/813-8819
Tel. 770/813-8818
SCM Tech 80 STC Both 1 14 []
SCM Tech 99L Both 1 18 []
Morbidelli Author Both 1 24 []
427S
Morbidelli Author Both 1 24 []
600KS
Morbidelli Author Both 1 38 []
600KLS
Morbidelll Author Both 1 40 []
800
Morbidelll Zenith Both Up to 28 Varies []
SL Woodworking Machinery Inc.,
1427-C Boulder Ct.,
Greensboro, NC 27409
Tel. 336/294-9024
FAX 336/294-9496
SL DM 039 DA 7-P Both 1 39 []
Schmidt Industrial Services Inc.,
P.O. Box 60193,
Fort Meyers, FL 33906-61
Tel. 941/275-7117
Lehbrink WL 357 Both Variable 40 []
Series
Lehbrink 358 WL Both []
Series
Lehbrink WL 360 Both []
Series
Lehbrink WL 95
Masterwood Group USA,
6601 North Park Blvd., Ste. E,
Charlotte, NC 28216
Tel. 704/921-9994
FAX 704/921-9930
K21 [] 37" x 16"
K23 [] 39" x 28"
K29 [] 47" x 28"
K39 [] 60" x 28"
Speedy 207 [] 29.5 x 110"
Winner 2.45L [] 50.6" x 96.4"
PRIMA [] 41" x 86"
Winner 2.45 50.6 x 96.4"
Winner 3.2 50.6" x 126"
Project 323 68.9 x 126"
Atlas 53 x 236"
J.S. Richardson Co. Inc.,
Clark Street,
Sheboygan Falls, WI 53085
Tel. 414/467-4655
FAX 414/467-4656
SAB [] 22 x 36 max.
LB [] 2-1/2 x 6 max.
XA [] 2-1/2 x 3 x 52
Ritter Mfg. Inc.,
1300-B W. 4th St.,
Antioch, CA 94509
Tel. 510/757-7296
R-130 [] 2-in. thick
R-131 [] 2-in. thick
R-800 [] 2-in. thick
R-125 [] 2-in. thick
R-160 [] 2-in. thick
R-160-100 [] 2-in. thick
R-113 [] 1-in. thick
R-23 [] 1-in. thick
R-46 [] 1-in. thick
R-46VH [] 1-in. thick
R-150 [] 1-in. thick
R-132 [] 2-in. thick
R-42 [] 1-in. thick
SCM GROUP USA,
2475 Satellite Blvd.,
Duluth, GA 30096
FAX 770/813-8819
Tel. 770/813-8818
SCM Tech 80 STC [] 39" x 88"
SCM Tech 99L [] 48" x 110"
Morbidelli Author [] 48" x 100"
427S
Morbidelli Author [] 54" x 106"
600KS
Morbidelli Author [] 54" x 141"
600KLS
Morbidelll Author [] 66" x 173
800
Morbidelll Zenith [] 50x230min &
800x3200 max
SL Woodworking Machinery Inc.,
1427-C Boulder Ct.,
Greensboro, NC 27409
Tel. 336/294-9024
FAX 336/294-9496
SL DM 039 DA 7-P [] Max. 55.7" wd.
Schmidt Industrial Services Inc.,
P.O. Box 60193,
Fort Meyers, FL 33906-61
Tel. 941/275-7117
Lehbrink WL 357 [] Variable
Series
Lehbrink 358 WL []
Series
Lehbrink WL 360 []
Series
Lehbrink WL 95
Masterwood Group USA,
6601 North Park Blvd., Ste. E,
Charlotte, NC 28216
Tel. 704/921-9994
FAX 704/921-9930
K21 [] [] []
K23 [] [] []
K29 [] [] []
K39 [] [] []
Speedy 207 131 fpm [] []
Winner 2.45L 131 fpm [] []
PRIMA 165 fpm [] [] []
Winner 2.45 195 fpm [] [] []
Winner 3.2 195 fpm [] [] []
Project 323 195 fpm [] [] []
Atlas [] [] []
J.S. Richardson Co. Inc.,
Clark Street,
Sheboygan Falls, WI 53085
Tel. 414/467-4655
FAX 414/467-4656
SAB 3600 rpm
LB 3600 rpm
XA 3600 rpm
Ritter Mfg. Inc.,
1300-B W. 4th St.,
Antioch, CA 94509
Tel. 510/757-7296
R-130
R-131
R-800
R-125
R-160
R-160-100
R-113 []
R-23 [] []
R-46 [] []
R-46VH []
R-150 [] []
R-132
R-42 [] []
SCM GROUP USA,
2475 Satellite Blvd.,
Duluth, GA 30096
FAX 770/813-8819
Tel. 770/813-8818
SCM Tech 80 STC 50m/mm [] []
SCM Tech 99L 50m/mm [] []
Morbidelli Author 50m/mm [] []
427S
Morbidelli Author 50m/mm [] []
600KS
Morbidelli Author 80 M/min [] []
600KLS
Morbidelll Author 80M/min [] []
800
Morbidelll Zenith 22 cycles/min []
SL Woodworking Machinery Inc.,
1427-C Boulder Ct.,
Greensboro, NC 27409
Tel. 336/294-9024
FAX 336/294-9496
SL DM 039 DA 7-P Variable [] Opt. []
Schmidt Industrial Services Inc.,
P.O. Box 60193,
Fort Meyers, FL 33906-61
Tel. 941/275-7117
Lehbrink WL 357 Variable [] []
Series
Lehbrink 358 WL Variable [] []
Series
Lehbrink WL 360 Variable [] []
Series
Lehbrink WL 95
Masterwood Group USA,
6601 North Park Blvd., Ste. E,
Charlotte, NC 28216
Tel. 704/921-9994
FAX 704/921-9930
K21
K23
K29
K39
Speedy 207 Grooving saw, versatile, entry-
level CNC.
Winner 2.45L 5.5 hp router, manual locking
pods, 40 cu. mtr. Pump,
pneumatically locking trays.
PRIMA 10.5-hp router, manual locking
pods, 40 cu. mtr. Pump,
pneumatically locking trays.
Winner 2.45 10.5-hp router 4 pos. tool changer
grooving saw, PC based control
barcode ready, cpt. router table.
Winner 3.2 Same as above.
Project 323 Same as above except no router
table option.
Atlas Several routers & axes w/special
clamps for windows & doors.
J.S. Richardson Co. Inc.,
Clark Street,
Sheboygan Falls, WI 53085
Tel. 414/467-4655
FAX 414/467-4656
SAB Comp. angular
LB Comp. angular with trim:
XA With trim.
Ritter Mfg. Inc.,
1300-B W. 4th St.,
Antioch, CA 94509
Tel. 510/757-7296
R-130
R-131
R-800
R-125
R-160
R-160-100
R-113 linear bearings, digital
display
R-23 same
R-46
R-46VH
R-150
R-132 32mm centers
R-42
SCM GROUP USA,
2475 Satellite Blvd.,
Duluth, GA 30096
FAX 770/813-8819
Tel. 770/813-8818
SCM Tech 80 STC 9 HP HSK electrospindle, 7
position tool changer, Dell PC
with modem and network card.
SCM Tech 99L 9 HP HSK electrospindle,
"Rapid 4" tool changer, Open
slot for 2nd electrospindle.
Morbidelli Author 9 HP HSK electrospindle,
427S "Rapid 6" toolchanger, X-Y
grooving saw.
Morbidelli Author 15 HP HSK main spindle with
600KS Vector, "Rapid 10" on board
toolchanger, secondary 9 HP
electrospindle and X-Y saw.
Morbidelli Author 15 HP HSK main spindle with
600KLS Vector, "Rapid 10" on board
toolchanger, secondary 9 HP
electrospindle and X-Y saw
Morbidelll Author Dual 15 HP HSK electro-
800 spindles, "Rapid 10" tool-
changer with optional Dual
toolchangers.
Morbidelll Zenith Manual, computer driven or full CNC
set-up available.
SL Woodworking Machinery Inc.,
1427-C Boulder Ct.,
Greensboro, NC 27409
Tel. 336/294-9024
FAX 336/294-9496
SL DM 039 DA 7-P Bores angles 0-90[degrees]
(45[degrees]).
Schmidt Industrial Services Inc.,
P.O. Box 60193,
Fort Meyers, FL 33906-61
Tel. 941/275-7117
Lehbrink WL 357
Series
Lehbrink 358 WL Dowel Inserting.
Series
Lehbrink WL 360 Glue Inserting.
Series
Lehbrink WL 95 Case clamps for folded pts.
Solid Wood Systems Inc.,
3202 E. Kivett Drive,
High Point, NC 27260
Tel. 910/884-0700
FAX 910/887-6650
Balestrini [] []
Stiles Machinery Inc.,
3965 44th St. S.E.,
Grand Rapids, MI 49508
Tel. 616/698-7500
FAX 616/698-9411
Weeke BP-100 [] CNC
Weeke BP-120 [] CNC
Weeke BP-140 [] CNC
Weeke BP-150 [] CNC
Weeke BP-145 [] CNC
Weeke BST-500 [] [] CNC
Weeke BST-100 [] [] CNC
Tekmatex Inc.,
3601 Performance Road,
Charlotte, NC 28266
Tel. 704/394-5131
FAX: 704/393-5008
Toyo SDT-43 []
Toyo BKMC [] CNC
Thermwood Corp.,
P.O. Box 436,
Dale, IN 47523
Tel. 800/533-6901
FAX 812/937-2956
Model 40 CNC
Tritec Assoc. Inc.,
44964-B Underwood Lane,
Sterling, VA 20166
Tel. 703/904-7890
FAX 703/904-7889
Optima 21 [] []
Gannomat Mentor [] []
Dowel Boring
Gannomat [] []
Format 42
Gannomat [] []
Proline 50
Gannomat Model 270 [] []
Hinge drilling and
inserting machine
Gannomat Elite 25/50 [] []
Dowel drilling, gluing
inserting machine
Index 125-250 [] CNC
Unique Machine Tool,
4232 E. Magnolia St.,
Pheonix, AZ 85032
Tel. 602/470-1911
FAX 602/470-1916
Model 81 [] []
Wilke Machinery Co.,
3230 Susquehanna Trail,
York, PA 17402
Tel. 717/764-5000 (800) 235-2100
Bridgewood [] [] []
#BW-808DMA
Bridgewood [] []
#BW-310 HB
Wisconsin Automated Machinery,
123 Jackson St., Box 3008,
Oshkosh, WI 54903
Tel. 920/231-4100
FAX 920/231-8166
17300-Horizontal [] [] [] [] []
7200 []
7000 []
410-Vertical [] [] [] []
Woodworkers Equipment & Machinery Co.,
P.O. Box 148,
Olin, NC 28660
Tel. 704/876-4952
FAX 704/876-6408
Wemco B []
Wemco X-Y [] [] [] [] NC
Wemco X-Y CNC [] [] [] CNC
Woodworking Machinery Distributors
USA -- by Maggi Inc.
14126 Gannete St.
Santa Fe Springs, CA 90670
Tel. 301/921-6970
Maggi [] []
Solid Wood Systems Inc.,
3202 E. Kivett Drive,
High Point, NC 27260
Tel. 910/884-0700
FAX 910/887-6650
Balestrini
Stiles Machinery Inc.,
3965 44th St. S.E.,
Grand Rapids, MI 49508
Tel. 616/698-7500
FAX 616/698-9411
Weeke BP-100 Varies Floppy disk
or hard drive
Weeke BP-120 Varies Floppy disk
or hard drive
Weeke BP-140 Varies Floppy disk
or hard drive
Weeke BP-150 Varies Floppy disk
or hard drive
Weeke BP-145 Varies Floppy disk
or hard drive
Weeke BST-500 Varies Floppy disk
or hard drive
Weeke BST-100 Varies Hard drive
floppy disk
Tekmatex Inc.,
3601 Performance Road,
Charlotte, NC 28266
Tel. 704/394-5131
FAX: 704/393-5008
Toyo SDT-43
Toyo BKMC Unlimited Floppy & tape
Thermwood Corp.,
P.O. Box 436,
Dale, IN 47523
Tel. 800/533-6901
FAX 812-937-2956
Model 40 Hard disk,
1.2 GB
Tritec Assoc. Inc.,
44964-B Underwood Lane,
Sterling, VA 20166
Tel. 703/904-7890
FAX 703/904-7889
Optima 21
Gannomat Mentor
Dowel Boring
Gannomat
Format 42
Gannomat
Proline 50
Gannomat Model 270
Hinge drilling and
inserting machine
Gannomat Elite 25/50 Programmable
Dowel drilling, gluing
inserting machine
Index 125-250 Varies Floppy or HD
Unique Machine Tool,
4232 E. Magnolia St.,
Pheonix, AZ 85032
Tel. 602/470-1911
FAX 602/470-1916
Model 81
Wilke Machinery Co.,
3230 Susquehanna Trail,
York, PA 17402
Tel. 717/764-5000 (800) 235-2100
Bridgewood
#BW-808DMA
Bridgewood
#BW-310 HB
Wisconsin Automated Machinery,
123 Jackson St., Box 3008,
Oshkosh, WI 54903
Tel. 920-231-4100
FAX 920/231-8166
17300-Horizontal 400 RAM
7200 400 RAM
7000 400 RAM
410-Vertical 400 RAM
Woodworkers Equipment & Machinery Co.,
P.O. Box 148,
Olin, NC 28660
Tel. 704/876-4952
FAX 704/876-6408
Wemco B
Wemco X-Y
Wemco X-Y CNC
Woodworking Machinery Distributors
USA -- by Maggi Inc.
14126 Gannett St.
Santa Fe Springs, CA 90670
Tel. 301/921-6970
Maggi
Solid Wood Systems Inc.,
3202 E. Kivett Drive,
High Point, NC 27260
Tel. 910/884-0700
FAX 910/887-6650
Balestrini []
Stiles Machinery Inc.,
3965 44th St. S.E.,
Grand Rapids, MI 49508
Tel. 616/698-7500
FAX 616/698-9411
Weeke BP-100 Both 1 21 vert
4 horiz
Weeke BP-120 Both 1 21 vert
4 horiz
Weeke BP-140 Both 1 21 vert
4 horiz
Weeke BP-150 Both 1 31 vert
6 horiz
Weeke BP-145 Both 1 22 vert
Weeke BST-500 Both Up to 28 11 to 25
Weeke BST-100 Both Up to 28 11 to 25
Tekmatex Inc.,
3601 Performance Road,
Charlotte, NC 28266
Tel. 704/394-5131
FAX: 704/393-5008
Toyo SDT-43 Vert. 3-24
Toyo BKMC Both 3-10
Thermwood Corp.,
P.O. Box 436,
Dale, IN 47523
Tel. 800/533-6901
FAX 812-937-2956
Model 40 Both 11 3
Tritec Assoc. Inc.,
44964-B Underwood Lane,
Sterling, VA 20166
Tel. 703/904-7890
FAX 703/904-7889
Optima 21 Both 1 21
Gannomat Mentor Both 1 25
Dowel Boring
Gannomat Vert 2 21
Format 42
Gannomat Vert 2 25
Proline 50
Gannomat Model 270 Vert 2 4
Hinge drilling and
inserting machine
Gannomat Elite 25/50 Horiz./ 1/2 25/50
Dowel drilling, gluing Vert.
inserting machine
Index 125-250 Both Varies 1-10 1-5
Unique Machine Tool,
4232 E. Magnolia St.,
Pheonix, AZ 85032
Tel. 602/470-1911
FAX 602/470-1916
Model 81 Hor. 1 1
Wilke Machinery Co.,
3230 Susquehanna Trail,
York, PA 17402
Tel. 717/764-5000 (800) 235-2100
Bridgewood Vert. 12 1
#BW-808DMA
Bridgewood Horiz. 2
#BW-310 HB
Wisconsin Automated Machinery,
123 Jackson St., Box 3008,
Oshkosh, WI 54903
Tel. 920-231-4100
FAX 920/231-8166
17300-Horizontal [] 4 4
7200 Hor. 15
7000 Hor. 15
410-Vertical 8 4
Woodworkers Equipment & Machinery Co.,
P.O. Box 148,
Olin, NC 28660
Tel. 704/876-4952
FAX 704/876-6408
Wemco B Both Unlimited
Wemco X-Y Both Unlimited
Wemco X-Y CNC Both Unlimited
Woodworking Machinery Distributors
USA -- by Maggi Inc.
14126 Gannett St.
Santa Fe Springs, CA 90670
Tel. 301/921-6970
Maggi Both 22 1
29 2, 14/15
Solid Wood Systems Inc.,
3202 E. Kivett Drive,
High Point, NC 27260
Tel. 910/884-0700
FAX 910/887-6650
Balestrini []
Stiles Machinery Inc.,
3965 44th St. S.E.,
Grand Rapids, MI 49508
Tel. 616/698-7500
FAX 616/698-9411
Weeke BP-100 []
Weeke BP-120 []
Weeke BP-140 []
Weeke BP-150 []
Weeke BP-145 []
Weeke BST-500 [] []
Weeke BST-100 [] []
Tekmatex Inc.,
3601 Performance Road,
Charlotte, NC 28266
Tel. 704/394-5131
FAX: 704/393-5008
Toyo SDT-43 [] []
Toyo BKMC []
Thermwood Corp.,
P.O. Box 436,
Dale, IN 47523
Tel. 800/533-6901
FAX 812-937-2956
Model 40
Tritec Assoc. Inc.,
44964-B Underwood Lane,
Sterling, VA 20166
Tel. 703/904-7890
FAX 703/904-7889
Optima 21 []
Gannomat Mentor []
Dowel Boring
Gannomat [] []
Format 42
Gannomat [] []
Proline 50
Gannomat Model 270 [] []
Hinge drilling and
inserting machine
Gannomat Elite 25/50
Dowel drilling, gluing
inserting machine
Index 125-250 []
Unique Machine Tool,
4232 E. Magnolia St.,
Pheonix, AZ 85032
Tel. 602/470-1911
FAX 602/470-1916
Model 81 [] []
Wilke Machinery Co.,
3230 Susquehanna Trail,
York, PA 17402
Tel. 717/764-5000 (800) 235-2100
Bridgewood [] []
#BW-808DMA
Bridgewood []
#BW-310 HB
Wisconsin Automated Machinery,
123 Jackson St., Box 3008,
Oshkosh, WI 54903
Tel. 920-231-4100
FAX 920/231-8166
17300-Horizontal [] []
7200 []
7000 []
410-Vertical [] []
Woodworkers Equipment & Machinery Co.,
P.O. Box 148,
Olin, NC 28660
Tel. 704/876-4952
FAX 704/876-6408
Wemco B [] []
Wemco X-Y [] [] []
Wemco X-Y CNC [] [] []
Woodworking Machinery Distributors
USA -- by Maggi Inc.
14126 Gannett St.
Santa Fe Springs, CA 90670
Tel. 301/921-6970
Maggi []
Solid Wood Systems Inc.,
3202 E. Kivett Drive,
High Point, NC 27260
Tel. 910/884-0700
FAX 910/887-6650
Balestrini
Stiles Machinery Inc.,
3965 44th St. S.E.,
Grand Rapids, MI 49508
Tel. 616/698-7500
FAX 616/698-9411
Weeke BP-100 2800mm
x 1250mm
Weeke BP-120 2800mm
x 1250mm
Weeke BP-140 2800mm
x 1250mm
Weeke BP-150 4250 mm
x 1300mm
Weeke BP-145 4500 mm
x 1530mm
Weeke BST-500 3250mm
x 1000mm
Weeke BST-100 3250mm
x 1000mm
Tekmatex Inc.,
3601 Performance Road,
Charlotte, NC 28266
Tel. 704/394-5131
FAX: 704/393-5008
Toyo SDT-43 Up to 48" x
120"
Toyo BKMC See above
Thermwood Corp.,
P.O. Box 436,
Dale, IN 47523
Tel. 800/533-6901
FAX 812-937-2956
Model 40 60" x 60"
Tritec Assoc. Inc.,
44964-B Underwood Lane,
Sterling, VA 20166
Tel. 703/904-7890
FAX 703/904-7889
Optima 21 0-760mm
Gannomat Mentor 850 mm max.
Dowel Boring
Gannomat L-unlimited
Format 42 width between
lines of holes
650mm mx
Gannomat
Proline 50
Gannomat Model 270 0-250mm
Hinge drilling and
inserting machine
Gannomat Elite 25/50
Dowel drilling, gluing
inserting machine
Index 125-250 2500/50
Unique Machine Tool,
4232 E. Magnolia St.,
Pheonix, AZ 85032
Tel. 602/470-1911
FAX 602/470-1916
Model 81 For frames up
to 12'
Wilke Machinery Co.,
3230 Susquehanna Trail,
York, PA 17402
Tel. 717/764-5000 (800) 235-2100
Bridgewood
#BW-808DMA
Bridgewood
#BW-310 HB
Wisconsin Automated Machinery,
123 Jackson St., Box 3008,
Oshkosh, WI 54903
Tel. 920-231-4100
FAX 920/231-8166
17300-Horizontal 4"
7200
7000
410-Vertical 4"
Woodworkers Equipment & Machinery Co.,
P.O. Box 148,
Olin, NC 28660
Tel. 704/876-4952
FAX 704/876-6408
Wemco B To 36" x 160"
Wemco X-Y See above
Wemco X-Y CNC See above
Woodworking Machinery Distributors
USA -- by Maggi Inc.
14126 Gannett St.
Santa Fe Springs, CA 90670
Tel. 301/921-6970
Maggi 35.5 x 98.5
43.5 x 98.5
Solid Wood Systems Inc.,
3202 E. Kivett Drive,
High Point, NC 27260
Tel. 910/884-0700
FAX 910/887-6650
Balestrini
Stiles Machinery Inc.,
3965 44th St. S.E.,
Grand Rapids, MI 49508
Tel. 616/698-7500
FAX 616/698-9411
Weeke BP-100 80 M/min. [] [] []
Weeke BP-120 80 M/min. [] [] []
Weeke BP-140 80 M/min. [] [] []
Weeke BP-150 80 M/min. [] [] []
Weeke BP-145 80 M/min. [] [] []
Weeke BST-500 Up to 30 [] []
cycles/min.
Weeke BST-100 Up to 30 [] []
cycles/min
Tekmatex Inc.,
3601 Performance Road,
Charlotte, NC 28266
Tel. 704/394-5131
FAX: 704/393-5008
Toyo SDT-43 [] []
Toyo BKMC [] [] []
Thermwood Corp.,
P.O. Box 436,
Dale, IN 47523
Tel. 800/533-6901
FAX 812-937-2956
Model 40 900 ipm
Tritec Assoc. Inc.,
44964-B Underwood Lane,
Sterling, VA 20166
Tel. 703/904-7890
FAX 703/904-7889
Optima 21 [] [] []
Gannomat Mentor [] [] []
Dowel Boring
Gannomat
Format 42
Gannomat [] [] []
Proline 50
Gannomat Model 270 [] [] []
Hinge drilling and
inserting machine
Gannomat Elite 25/50 [] [] []
Dowel drilling, gluing
inserting machine
Index 125-250 75m/min. [] []
Unique Machine Tool,
4232 E. Magnolia St.,
Pheonix, AZ 85032
Tel. 602/470-1911
FAX 602/470-1916
Model 81 Depends on []
mat; fully adj.
Wilke Machinery Co.,
3230 Susquehanna Trail,
York, PA 17402
Tel. 717/764-5000 (800) 235-2100
Bridgewood
#BW-808DMA
Bridgewood Variable
#BW-310 HB
Wisconsin Automated Machinery,
123 Jackson St., Box 3008,
Oshkosh, WI 54903
Tel. 920-231-4100
FAX 920/231-8166
17300-Horizontal Variable
7200
7000
410-Vertical Variable
Woodworkers Equipment & Machinery Co.,
P.O. Box 148,
Olin, NC 28660
Tel. 704/876-4952
FAX 704/876-6408
Wemco B 0-40 cy/min. [] []
Wemco X-Y 0-40 Sp/min. [] []
Wemco X-Y CNC 0-40 Gd./in. [] []
Woodworking Machinery Distributors
USA -- by Maggi Inc.
14126 Gannett St.
Santa Fe Springs, CA 90670
Tel. 301/921-6970
Maggi []
Solid Wood Systems Inc.,
3202 E. Kivett Drive,
High Point, NC 27260
Tel. 910/884-0700
FAX 910/887-6650
Balestrini
Stiles Machinery Inc.,
3965 44th St. S.E.,
Grand Rapids, MI 49508
Tel. 616/698-7500
FAX 616/698-9411
Weeke BP-100 Windows-based control
Weeke BP-120 Automatic: a tool changer,
Windows based control
Weeke BP-140 ATC with C-axis,
Windows based control
Weeke BP-150 ATC with C-axis,
Windows-based control
Weeke BP-145 ATC with C-axis,
Windows-based control
Weeke BST-500 Quick manual setup
Weeke BST-100 CNC-controlled setup
Tekmatex Inc.,
3601 Performance Road,
Charlotte, NC 28266
Tel. 704/394-5131
FAX: 704/393-5008
Toyo SDT-43 Multi-spindle vertical
boring. Digital set-up.
Toyo BKMC Point to point boring.
Thermwood Corp.,
P.O. Box 436,
Dale, IN 47523
Tel. 800/533-6901
FAX 812-937-2956
Model 40 Multi task, control com,
Panel Cad, Universal
holddown.
Tritec Assoc. Inc.,
44964-B Underwood Lane,
Sterling, VA 20166
Tel. 703/904-7890
FAX 703/904-7889
Optima 21 Opt protractor-angle drill.
Gannomat Mentor Adj. fence accounts for
Dowel Boring out of sequence panels std.
Gannomat Program fence for common
Format 42 setups. Chip free drilling on
many panels.
Gannomat Fence floats w/ft head at
Proline 50 37mm offset for Euro
hardware
Gannomat Model 270 Drill & inserts 2 hinges in 5
Hinge drilling and second cycle
inserting machine
Gannomat Elite 25/50 Mirror image option for
Dowel drilling, gluing right/left sequencing of
inserting machine gluing stations
Index 125-250 Windows based control
Unique Machine Tool,
4232 E. Magnolia St.,
Pheonix, AZ 85032
Tel. 602/470-1911
FAX 602/470-1916
Model 81 Fully auto.--automatically
drills and retracts.
Wilke Machinery Co.,
3230 Susquehanna Trail,
York, PA 17402
Tel. 717/764-5000 (800) 235-2100
Bridgewood Semi/auto and automatic
#BW-808DMA cycle.
Bridgewood Foot pedal control, air
#BW-310 HB hold down clamp
Wisconsin Automated Machinery,
123 Jackson St., Box 3008,
Oshkosh, WI 54903
Tel. 920-231-4100
FAX 920/231-8166
17300-Horizontal CNC or manual setup.
7200
7000 Bore and chisel mortise
410-Vertical Multi-sided or vertical only
Woodworkers Equipment & Machinery Co.,
P.O. Box 148,
Olin, NC 28660
Tel. 704/876-4952
FAX 704/876-6408
Wemco B Allaziomath
Wemco X-Y Boring
Wemco X-Y CNC Angular or compound
Woodworking Machinery Distributors
USA -- by Maggi Inc.
14126 Gannett St.
Santa Fe Springs, CA 90670
Tel. 301/921-6970
Maggi
PANEL SIZING, BORING & EDGEBANDING
PANEL SAW REFERENCE GUIDE
Product Name/No. Vertical Sliding Table Beam Angular
Adwood Corp.,
P.O. Box 1195,
High Point, NC 27261
Tel. 336/884-1846
FAX 336/841-6493
ELCON R-Series []
ELCON RS-Series []
ELCON RSX-Serieo []
ELCON RSX-E Series []
ELCON Advanced-E []
ELCON 185 Limpio []
ELCONN LIMPIOMAT []
SE 400 []
Astra 3 Digit []
Astra Top Digit 1 []
Top Digit E []
Astra 4 CNC []
Altendorf America, Div. of
Stiles Machinery Inc.,
P.O. Box 316,
Grand Rapids, MI 49512
Tel. 616/698-8456
Altendorf F-92 []
Altendorf F-92T []
Altendorf []
F-45 Standard
Altendorf F-45 []
Select
Altendorf F-45 []
Elmo 3
Altendorf F-45 []
Elmo 4
Homag Espana []
Model CH-12
Homag Espana []
CH 12/26/26/E
Homag Espana []
CH 12/38/26/E
Homag Espana []
CH 12/38/38/E
Homag Espana []
CH 12/32/32/E
Homag Espana []
CH 12/42/26/E
Homag Espana []
CH 12/42/42/E
Homag Espana []
CH 03/26/12/E
Homag Espana []
CH 03/26/22/E
Homag Espana []
CH 03/32/12/E
Homag Espana []
CH 03/32/25/E
Homag Espana []
CH 03/38/12/E
Homag Espana []
CH 03/38/22/E
Homag Espana []
CH 03/38/25/E
Homag Espana []
CH 03 Plus 3200
Product Name/No. Motor hp Manual Semi-Automatic
Adwood Corp.,
P.O. Box 1195,
High Point, NC 27261
Tel. 336/884-1846
FAX 336/841-6493
ELCON R-Series 3 []
ELCON RS-Series 4 []
ELCON RSX-Serieo 7.5 []
ELCON RSX-E Series 7.5
ELCON Advanced-E 7.5 []
ELCON 185 Limpio 7.5 []
ELCONN LIMPIOMAT 7.5 []
SE 400 9 []
Astra 3 Digit 9 []
Astra Top Digit 1 9 []
Top Digit E 9 []
Astra 4 CNC 9
Altendorf America, Div. of
Stiles Machinery Inc.,
P.O. Box 316,
Grand Rapids, MI 49512
Tel. 616/698-8456
Altendorf F-92 7.5 []
Altendorf F-92T 7.5 []
Altendorf 7.5 - 10 hp []
F-45 Standard
Altendorf F-45 7.5 - 10 hp []
Select
Altendorf F-45 7.5 - 10 hp []
Elmo 3
Altendorf F-45 7.5 - 10 hp []
Elmo 4
Homag Espana 12 hp
Model CH-12
Homag Espana 12 hp
CH 12/26/26/E
Homag Espana 12 hp
CH 12/38/26/E
Homag Espana 12 hp
CH 12/38/38/E
Homag Espana 12 hp
CH 12/32/32/E
Homag Espana 12 hp
CH 12/42/26/E
Homag Espana 12 hp
CH 12/42/42/E
Homag Espana 7.5 hp
CH 03/26/12/E
Homag Espana 7.5 hp
CH 03/26/22/E
Homag Espada 7.5 hp
CH 03/32/12/E
Homag Espana 7.5 hp
CH 03/32/25/E
Homag Espana 7.5 hp
CH 03/38/12/E
Homag Espana 7.5 hp
CH 03/38/22/E
Homag Espana 7.5 hp
CH 03/38/25/E
Homag Espana 7.5 hp
CH 03 Plus 3200
NC or Capacity per
Product Name/No. Automatic CNC 8 hr. Shift
Adwood Corp.,
P.O. Box 1195,
High Point, NC 27261
Tel. 336/884-1846
FAX 336/841-6493
ELCON R-Series
ELCON RS-Series
ELCON RSX-Serieo
ELCON RSX-E Series []
ELCON Advanced-E
ELCON 185 Limpio
ELCONN LIMPIOMAT
SE 400
Astra 3 Digit
Astra Top Digit 1
Top Digit E NC
Astra 4 CNC [] NC
Altendorf America, Div. of
Stiles Machinery Inc.,
P.O. Box 316,
Grand Rapids, MI 49512
Tel. 616/698-8456
Altendorf F-92
Altendorf F-92T
Altendorf
F-45 Standard
Altendorf F-45
Select
Altendorf F-45 NC
Elmo 3
Altendorf F-45 NC
Elmo 4
Homag Espana [] CNC
Model CH-12
Homag Espana [] CNC
CH 12/26/26/E
Homag Espana [] CNC
CH 12/38/26/E
Homag Espana [] CNC
CH 12/38/38/E
Hemag Espana [] CNC
CH 12/32/32/E
Homag Espana [] CNC
CH 12/42/26/E
Homag Espana [] CNC
CH 12/42/42/E
Homag Espana [] NC
CH 03/26/12/E
Homag Espana [] NC
CH 03/26/22/E
Homag Espada [] NC
CH 03/32/12/E
Homag Espana [] NC
CH 03/32/25/E
Homag Espana [] NC
CH 03/38/12/E
Homag Espana [] NC
CH 03/38/22/E
Homag Espana [] NC
CH 03/38/25/E
Homag Espana [] NC
CH 03 Plus 3200
Type of
Work Tilt
Product Name/No. Piece Size Scoring Hydraulic
Adwood Corp.,
P.O. Box 1195,
High Point, NC 27261
Tel. 336/884-1846
FAX 336/841-6493
ELCON R-Series 4' X 8'
ELCON RS-Series Height up to 7' []
length up to 13"
ELCON RSX-Serieo Height up to 7' []
length up to 17"
ELCON RSX-E Series Vert, up to 7' []
length up to 17"
ELCON Advanced-E Vert. up to 7' []
length up to 17"
ELCON 185 Limpio 6' x 13' []
ELCONN LIMPIOMAT 7' x 17' []
SE 400 4" thickness []
Astra 3 Digit 5" thickness []
Astra Top Digit 1 5" thickness [] Electrical
Top Digit E 5" thickness [] Electrical
Astra 4 CNC 5" thickness [] Electrical
Altendorf America, Div. of
Stiles Machinery Inc.,
P.O. Box 316,
Grand Rapids, MI 49512
Tel. 616/698-8456
Altendorf F-92 Thickness to 3" []
10' x 10' panels
Altendorf F-92T Thickness to 3' []
10 x 10 panels
Altendorf Thickness to []
F-45 Standard 5.8125"
10 x 10 panels
Altendorf F-45 Thickness to []
Select 5.8125"
10 x 10 panels
Altendorf F-45 Thickness to []
Elmo 3 5.8125"
10 x 10 panels
Altendorf F-45 Thickness to
Elmo 4 5.8125"
10 x 10 panels
Homag Espana 10-14 ft panels []
Model CH-12
Homag Espana 8' x 8' []
CH 12/26/26/E
Homag Espana 12' x 8' []
CH 12/38/26/E
Homag Espana 12' x 12' []
CH 12/38/38/E
Hemag Espana 10' x 10' []
CH 12/32/32/E
Homag Espana 13.75' x 8' []
CH 12/42/26/E
Homag Espana 13.75' x 13.75' []
CH 12/42/42/E
Homag Espana 8' x 4' []
CH 03/26/12/E
Homag Espana 8' x 7' []
CH 03/26/22/E
Homag Espada 10' x 4' []
CH 03/32/12/E
Homag Espana 10' x 8' []
CH 03/32/25/E
Homag Espana 12' x 4' []
CH 03/38/12/E
Homag Espana 12' x 7' []
CH 03/38/22/E
Homag Espana 12' x 8' []
CH 03/38/25/E
Homag Espana 10' x 10' []
CH 03 Plus 3200
Type of
Product Name/No. Manual Pneumatic Hold Down
Adwood Corp.,
P.O. Box 1195,
High Point, NC 27261
Tel. 336/884-1846
FAX 336/841-6493
ELCON R-Series Pneumatic
ELCON RS-Series Pneumatic
ELCON RSX-Serieo Pneumatic
ELCON RSX-E Series Pneumatic
ELCON Advanced-E Pneumatic &
mechanical clamps
ELCON 185 Limpio Pneumatic
ELCONN LIMPIOMAT Pneumatic
SE 400 [] Pneumatic
avilable
Astra 3 Digit [] Pneumatic
available
Astra Top Digit 1 Pneumatic
available
Top Digit E Pneumatic
available
Astra 4 CNC Pneumatic
available
Altendorf America, Div. of
Stiles Machinery Inc.,
P.O. Box 316,
Grand Rapids, MI 49512
Tel. 616/698-8456
Altendorf F-92 Pneumatic
available
Altendorf F-92T [] Pneumatic
available
Altendorf Pneumatic
F-45 Standard available
Altendorf F-45 Pneumatic
Select available
Altendorf F-45 Pneumatic
Elmo 3 available
Altendorf F-45 Pneumatic
Elmo 4 available
Homag Espana Pneumatic
Model CH-12
Homag Espana Full-length
CH 12/26/26/E pneumatic
Homag Espana
CH 12/38/26/E
Homag Espana
CH 12/38/38/E
Hemag Espana
CH 12/32/32/E
Homag Espana
CH 12/42/26/E
Homag Espana
CH 12/42/42/E
Homag Espana Full-length
CH 03/26/12/E pneumatic
Homag Espana
CH 03/26/22/E
Homag Espada
CH 03/32/12/E
Homag Espana
CH 03/32/25/E
Homag Espana
CH 03/38/12/E
Homag Espana
CH 03/38/22/E
Homag Espana
CH 03/38/25/E
Homag Espana Full-length
CH 03 Plus 3200 pneumatic
No. of
Product Name/No. Operators
Adwood Corp.,
P.O. Box 1195,
High Point, NC 27261
Tel. 336/884-1846
FAX 336/841-6493
ELCON R-Series 1
ELCON RS-Series 1
ELCON RSX-Serieo 1
ELCON RSX-E Series 1
ELCON Advanced-E 1
ELCON 185 Limpio 1
ELCONN LIMPIOMAT 1
SE 400
Astra 3 Digit 1
Astra Top Digit 1 1
Top Digit E 1
Astra 4 CNC 1
Altendorf America, Div. of
Stiles Machinery Inc.,
P.O. Box 316,
Grand Rapids, MI 49512
Tel. 616/698-8456
Altendorf F-92 1
Altendorf F-92T 1
Altendorf 1
F-45 Standard
Altendorf F-45 1
Select
Altendorf F-45 1
Elmo 3
Altendorf F-45 1
Elmo 4
Homag Espana 1
Model CH-12
Homag Espana 1
CH 12/26/26/E
Homag Espana 1
CH 12/38/26/E
Homag Espana 1
CH 12/38/38/E
Homag Espana 1
CH 12/32/32/E
Homag Espana 1
CH 12/42/26/E
Homag Espana 1
CH 12/42/42/E
Homag Espana 1
CH 03/26/12/E
Homag Espana 1
CH 03/26/22/E
Homag Espada 1
CH 03/32/12/E
Homag Espana 1
CH 03/32/25/E
Homag Espana 1
CH 03/38/12/E
Homag Espana 1
CH 03/38/22/E
Homag Espana 1
CH 03/38/25/E
Homag Espana 1
CH 03 Plus 3200
Product Name/No. Special Features
Adwood Corp.,
P.O. Box 1195,
High Point, NC 27261
Tel. 336/884-1846
FAX 336/841-6493
ELCON R-Series Fast changeover. Easy plunging,
high accuracy, repeat stops
ELCON RS-Series Reinforced construction. Progr.
rail, rotating scoring blade.
ELCON RSX-Serieo Up to 3 1/8" of panel thickness
ELCON RSX-E Series Up to 3 1/8" of panel thickness, auto
feed in X only - speed var. 0-70 fpm.
ELCON Advanced-E Complete cut to size is one
time handling
ELCON 185 Limpio Patented dust free system.
ELCONN LIMPIOMAT Patented dust free system.
SE 400
Astra 3 Digit Heavy frame construction
16" main blade.
Astra Top Digit 1 Guareneed slide accuracy
0.025 digital readout.
Top Digit E
Astra 4 CNC 3 axis, NC control.
Altendorf America, Div. of
Stiles Machinery Inc.,
P.O. Box 316,
Grand Rapids, MI 49512
Tel. 616/698-8456
Altendorf F-92 Heavy frame construction.
Rapido scoring.
Altendorf F-92T Heavy frame construction.
Rapido scoring.
Altendorf Heavy frame construction.
F-45 Standard Rapido scoring, digital tilt display,
digital height display.
Altendorf F-45 Heavy frame construction,
Select Rapido scoring, digital tilt display
digital height display and rip fence.
Altendorf F-45 Motorized rip fence, motorized blade
Elmo 3 height & tilt, Rapido scoring,
digital readouts.
Altendorf F-45 Motorized rip fence motorized cross-
Elmo 4 cut fence, motorized blade height
& tilt, Rapido Scoring, digital readout.
Homag Espana Air tables, side alignment,
Model CH-12 downloadable
Homag Espana Programmable, downloadable,
CH 12/26/26/E automatic incremental and
absolute cutting, material clamps,
Homag Espana side alignment device for
CH 12/38/26/E crosscuts 2-position cutting
Homag Espana variable speed saw carriage
CH 12/38/38/E (20-105 fpm)
Hemag Espana
CH 12/32/32/E
Homag Espana
CH 12/42/26/E
Homag Espana
CH 12/42/42/E
Homag Espana Programmable, automatic
CH 03/26/12/E incremental and absolute
cutting, up to 2" cutting height,
Homag Espana automatic cutting length,
CH 03/26/22/E scoring, electronic pusher fence,
variable speed sam carriage
Homag Espada (20-105 fpm)
CH 03/32/12/E
Homag Espana
CH 03/32/25/E
Homag Espana
CH 03/38/12/E
Homag Espana
CH 03/38/22/E
Homag Espana
CH 03/38/25/E
Homag Espana Programmable, downloadable, automatic
CH 03 Plus 3200 incremental & absolute cutting, material
clamps, side alignment pressure device
for crosscutting, operator-controlled
variable speed saw carriage (up to
32m/min.)
Altendorf America, Div. of
Stiles Machinery Inc.,
P.O. Box 316,
Grand Rapids, MI 49512
Tel. 616/698-8456
Homag Espana [] 7.5 hp [] [] []
CH 03 Plus 3800
Homag Espana [] 7.5 [] [] []
CH 03 Standard 3200
Homag Espana [] 7.5 [] [] []
1CH 03 Standard 3800
Homag Espana [] 15 [] [] []
CH 12 ProfLine 3200
Homag Espana [] 15 [] [] []
CH 12 ProfLine 3800
Atlantic Machinery Corp.,
36 South End Plaza,
New Milford, CT 06776
Tel. 860/354-7200
Fax 860/354-0315
Putsch/Meniconi [] 3.6 []
Univer SVP 620
Univer SVP 133 [] 4.8-6 []
Univer SVP 145 [] 4.8-6 []
Univer SVP 950A [] 7.5 []
Univers SS [] 7.5 []
Lazzari TEMA 1600 [] 6.6 []
Lazzari TEMA 2600 [] 6.6 []
Lazzari TEMA 3200 [] 7.5 []
Lazzari JUNO 2600 [] 9 []
Lazzari JUNO 3200 [] 9 []
Lazzari ERDA 3200 [] 9 []
Biesse America,
P.O. Box 19849,
Charlotte, NC 28219-9849
Tel. 704/357-3131
FAX 704/357-3130
Polymac AC 32/45 [] 9 hp []
Selco EB 90 [] 12 hp []
Selco EB 120 [] 24 hp []
Selco EBT 120 [] 24 hp []
rear loading w/lift table
Selco WN 600 [] 30 hp []
Selco WNT 600 [] 30 hp []
rear loading w/lift table
Selco WNA 600 [] 30 hp []
Black Forest Machine Co.,
244 Cox St., P.O Box 376,
Roselle, NJ 07203
Tel. 908/620-3900
Fax 908/620-3901
Mayer PS-9 [] 15-18
Mayer PS-9Z [] 15-18
Mayer PS-2 [] 24-40
Mayer PS-2Z [] 24-40
Mayer AL-90 [] 24-75
Mayer AL-150 [] 24-75
Mayer AL-200 [] 24-75
Altendorf America, Div. of
Stiles Machinery Inc.,
P.O. Box 316,
Grand Rapids, MI 49512
Tel. 616/698-8456
Homag Espana CNC
CH 03 Plus 3800
Homag Espana NC
CH 03 Standard 3200
Homag Espana NC
1CH 03 Standard 3800
Homag Espana CNC
CH 12 ProfLine 3200
Homag Espana CNC
CH 12 ProfLine 3800
Atlantic Machinery Corp.,
36 South End Plaza,
New Milford, CT 06776
Tel. 860/354-7200
Fax 860/354-0315
Putsch/Meniconi
Univers SVP 620
Univer SVP 133
Univer SVP 145
Univer SVP 950A
Univers SS
Lazzari TEMA 1600 Medium
Lazzari TEMA 2600 Medium
Lazzari TEMA 3200 Medium
Lazzari JUNO 2600 High
Lazzari JUNO 3200 High
Lazzari ERDA 3200 High
Biesse America,
P.O. Box 19849,
Charlotte, NC 28219-9849
Tel. 704/357-3131
FAX 704/357-3130
Polymac AC 32/45 CNC 2 3/4"
Selco EB 90 CNC 3" per cycle
Selco EB 120 CNC 4" per cycle
Selco EBT 120 CNC 4" per cycle
rear loading w/lift table
Selco WN 600 CNC 5" per cycle
Selco WNA 600 CNC 5" per cycle
rear loading w/lift table
Selco WNA 600 CNC 5" per cycle
Black Forest Machine Co.,
244 Cox St., P.O Box 376,
Roselle, NJ 07203
Tel. 908/620-3900
Fax 908/920-3901
Mayer PS-9 Dell PC Varies with individual
cutting patterns
Mayer PS-9Z Dell PC Same
Mayer PS-2 Dell PC Same
Mayer PS-2Z Dell PC Same
Mayer AL-90 Dell PC Same
Mayer AL-150 Dell PC Same
Mayer AL-200 Dell PC Same
Altendorf America, Div. of
Stiles Machinery Inc.,
P.O. Box 316,
Grand Rapids, MI 49512
Tel. 616/698-8456
Homag Espana 12' x 12' []
CH 03 Plus 3800
Homag Espana 10' x unlimited []
CH 03 Standard 3200
Homag Espana 12' x unlimited []
1CH 03 Standard 3800
Homag Espana 10' x 10' []
CH 12 ProfLine 3200
Homag Espana 12' x 12' []
CH 12 ProfLine 3800
Atlantic Machinery Corp.,
36 South End Plaza,
New Milford, CT 06776
Tel. 860/354-7200
Fax 860/354-0315
Putsch/Meniconi 5' x 10' Opt.
Univers SVP 620 5' x 12'
Univer SVP 133 5' x 10' Opt.
Univer SVP 145 6' x 12' Opt.
Univer SVP 950A 6' x 14' Opt.
Univers SS 5' x 10' or 5' x 12' Opt.
Lazzari TEMA 1600 6' x 6' 1 hp
Lazzari TEMA 2600 8' x 8' 1 hp
Lazzari TEMA 3200 10' x 10' 1 hp
Lazzari JUNO 2600 8' x 10' 1 hp
Lazzari JUNO 3200 10' x 10' 1 hp
Lazzari ERDA 3200 10' x 10' 1 hp
Biesse America,
P.O. Box 19849,
Charlotte, NC 28219-9849
Tel. 704/357-3131
FAX 704/357-3130
Polymac AC 32/45 up to 5' x 12' manual
adjustment
Selco EB 90 up to 5' x 12' manual
adjustment
Selco EB 120 up to 5' x 12' electronic
adjustment
Selco EBT 120 up to 5' x 12' electronic
rear loading w/lift table adjustment
Selco WN 600 up to 5' x 12' electronic
adjustment
Selco WNA 600 up to 5' x 12' electronic
rear loading w/lift table adjustment
Selco WNA 600 up to 5' x 12' electronic
adjustment
Black Forest Machine Co.,
244 Cox St., P.O Box 376,
Roselle, NJ 07203
Tel. 908/620-3900
Fax 908/920-3901
Mayer PS-9 Custom built up []
to 20' cutting
lengths w/ high
accuracy
Mayer PS-9Z Same []
Mayer PS-2 Same []
Mayer PS-2Z Same []
Mayer AL-90 Same []
Mayer AL-150 Same []
Mayer AL-200 Same []
Type of
Tilt
Hydraulic Pneumatic
Altendorf America, Div. of
Stiles Machinery Inc.,
P.O. Box 316,
Grand Rapids, MI 49512
Tel. 616/698-8456
Homag Espana
CH 03 Plus 3800
Homag Espana
CH 03 Standard 3200
Homag Espana
1CH 03 Standard 3800
Homag Espana
CH 12 ProfLine 3200
Homag Espana
CH 12 ProfLine 3800
Atlantic Machinery Corp.,
36 South End Plaza,
New Milford, CT 06776
Tel. 860/354-7200
Fax 860/354-0315
Putsch/Meniconi
Univers SVP 620
Univer SVP 133
Univer SVP 145
Univer SVP 950A
Univers SS
Lazzari TEMA 1600 []
Lazzari TEMA 2600 []
Lazzari TEMA 3200 []
Lazzari JUNO 2600 []
Lazzari JUNO 3200 []
Lazzari ERDA 3200 []
Biesse America,
P.O. Box 19849,
Charlotte, NC 28219-9849
Tel. 704/357-3131
FAX 704/357-3130
Polymac AC 32/45
Selco EB 90
Selco EB 120
Selco EBT 120
rear loading w/lift table
Selco WN 600
Selco WNA 600
rear loading w/lift table
Selco WNA 600
Black Forest Machine Co.,
244 Cox St., P.O Box 376,
Roselle, NJ 07203
Tel. 908/620-3900
Fax 908/920-3901
Mayer PS-9
Mayer PS-9Z
Mayer PS-2
Mayer PS-2Z
Mayer AL-90
Mayer AL-150
Mayer AL-200
Altendorf America, Div. of
Stiles Machinery Inc.,
P.O. Box 316,
Grand Rapids, MI 49512
Tel. 616/698-8456
Homag Espana Penumatic 1
CH 03 Plus 3800 Pressure Beam
Homag Espana Pneumatic 1
CH 03 Standard 3200 Pressure Beam
Homag Espana Pneumatic 1
1CH 03 Standard 3800 Pressure Beam
Homag Espana Pneumatic 1
CH 12 ProfLine 3200 Pressure Beam
Homag Espana Pneumatic 1
CH 12 ProfLine 3800 Pressure Beam
Atlantic Machinery Corp.,
36 South End Plaza,
New Milford, CT 06776
Tel. 860/354-7200
Fax 860/354-0315
Putsch/Meniconi 1
Univers SVP 620
Univer SVP 133
Univer SVP 145
Univer SVP 950A
Univers SS
Lazzari TEMA 1600 Eccentric 1
Lazzari TEMA 2600 Eccentric 1
Lazzari TEMA 3200 Eccentric 1
Lazzari JUNO 2600 Eccentric 1
Lazzari JUNO 3200 Eccentric 1
Lazzari ERDA 3200 Eccentric 1
Biesse America,
P.O. Box 19849,
Charlotte, NC 28219-9849
Tel. 704/357-3131
FAX 704/357-3130
Polymac AC 32/45 Beam/Grippers 1
Selco EB 90 Beam/Grippers 1
Selco EB 120 Beam/Grippers 1
Selco EBT 120 Beam/Grippers 1
rear loading w/lift table
Selco WN 600 Double Beam/ 1
Grippers
Selco WNA 600 Double Beam/ 1
rear loading w/lift table Grippers
Selco WNA 600 Double Beam/ 1
Grippers
Black Forest Machine Co.,
244 Cox St., P.O Box 376,
Roselle, NJ 07203
Tel. 908/620-3900
Fax 908/920-3901
Mayer PS-9 Specially designed 1
pneumatic clamping
beam
Mayer PS-9Z Same 1
Mayer PS-2 Same 1
Mayer PS-2Z Same 1
Mayer AL-90 Same 1
Mayer AL-150 Same 1
Mayer AL-200 Same 1
Altendorf America, Div. of
Stiles Machinery Inc.,
P.O. Box 316,
Grand Rapids, MI 49512
Tel. 616/698-8456
Homag Espana Same as above.
CH 03 Plus 3800
Homag Espana Same as above.
CH 03 Standard 3200
Homag Espana Same as above.
1CH 03 Standard 3800
Homag Espana Same as above.
CH 12 ProfLine 3200 Up to 60 m/min.
Homag Espana Same as above.
CH 12 ProfLine 3800 Up to 60 m/min.
Atlantic Machinery Corp.,
36 South End Plaza,
New Milford, CT 06776
Tel. 860/354-7200
Fax 860/354-0315
Putsch/Meniconi All Univer saws have a one-piece heavy-
Univers SVP 620 -duty welded steel frame, electrically
Univer SVP 133 operated shifting grid, pop-up rollers,
Univer SVP 145 opt. micro-adjustable scoring unit;
Univer SVP 950A 0.1mm over 1 meter length guranteed with
factory installation
Univers SS For solid surface, SSV & V-grooving
Lazzari TEMA 1600 Separate scoring motor, overarm
saw guard, four-year warranty
Lazzari TEMA 2600 Same as above
Lazzari TEMA 3200 Same as above
Lazzari JUNO 2600 Elec. blade lift, elec. scoring adj.
Lazzari JUNO 3200 Same as above
Lazzari ERDA 3200 Same as above plus elec. blade tilt
2500 long base
Biesse America,
P.O. Box 19849,
Charlotte, NC 28219-9849
Tel. 704/357-3131
FAX 704/357-3130
Polymac AC 32/45
Selco EB 90 Automatic side alignment Patented
air table; PC control; Tele-Service;
Downloading
Selco EB 120 Quick change; Patented frame; PC
control; Elect. scoring adj.; Tele-
Service; Downloading
Selco EBT 120 Rear Load; Quick change; Patented
rear loading w/lift table frame; PC Control; Elect. Scoring
Adj.; Tele-Service; Downloading
Selco WN 600 Quick change; Patented frams; PC
control; Elect. scoring adj.; Tele-
Service; Downloading
Selco WNA 600 Same as above plus Rear Load.
rear loading w/lift table
Selco WNA 600 Same as above plus patented
shuttle transfer
Black Forest Machine Co.,
244 Cox St., P.O Box 376,
Roselle, NJ 07203
Tel. 908/620-3900
Fax 908/920-3901
Mayer PS-9 Windows 95 and NT. Options: label
printer, on board optimization, auto
cutting height, trim cut, post form
cutting, air tables side pressure, large
memory, IBM interface. Hi speed saw &
program fence, hardened & ground ways,
absolute cut line auto side pressure,
length of cut, blade hight triming cut,
diagnostics, remote. Opts for computer,
graphics, barcode, rear for front load,
postform, custom urations for veneer,
short run non-ferrous, plastic
Mayer PS-9Z Same
Mayer PS-2 Same
Mayer PS-2Z Same
Mayer AL-90 Same
Mayer AL-150 Same
Mayer AL-200 Same
Richard T. Byrnes Co. Inc.,
600 Hannum Ave.,
West Chester, PA 19380
Tel. 610/692-2770
FAX 610/696-0330
Byrnes/Scheer Postform [] 12 [] [] DNC
Saw PA5053
Byrnes/Scheer PA 4000 [] [] DNC
Byrnes/Scheer PA 7000 [] 15 [] [] DNC
Casadei America,
6235 Danville Rd.,
Mississauga,
ONT Canada L5T 2H7
Tel. 877/227-2334
Toll Free FAX 877/227-5157
Casadei []
KS 15 [] 6.6 hp []
Casadei 3400 [] 10 hp []
Casadei KS 3 [] 5.5 hp []
Casadei KS 32 Plus [] 7.5 hp []
Casadei LINEA Plus [] 7.5 hp []
Casadei LINEA [] 7.5 hp []
Casadei SS 32 [] 12 hp [] CNC
Casadei SS 45 [] 12 hp [] CNC
Casadei SP 32 [] 12 hp [] CNC
Casadei SP 45 [] 12 hp [] CNC
Casadei SV 15 [] 18 hp [] CNC
Casadei SV 32 [] 18 hp [] CNC
Casadei SV 45 [] 18 hp [] CNC
CA SV 45 P [] 18 hp [] CNC
CAS SP 45 D [] 18 hp [] CNC
Casadei SP 45 PD [] 18 hp [] CNC
Colonial Saw Co. Inc.,
122 Pembroke St., P.O. Box A,
Kingston, MA 02364
Tel. 781/585-4364
FAX 781/585-9375
Striebig Optisaw 1 [] 4 []
Striebig Optisaw [] 4 []
1-Plus
Striebig Optisaw 2 [] 7.5 []
Striebig Optisaw 3 [] 7.5 []
Striebig Optisaw [] 7.5 []
Automatic
Striebig Digitron
Positron Automatic
Programmable
System
Striebig WSG Angle- []
Cutting Attachment
DMG - Delmac Machinery Group,
4322 Piedmont Pkwy.,
Greensboro, NC 27410
Tel. 336/854-1211
FAX 336/854-0811
Gabbiani [] 30-40 [] NC
Sincar/TH
Gabbiani [] 7-15 [] NC
Sincar/T
Gabbiani [] [] NC
Sincar L
E&R System Technik Inc.,
85 St. George Road,
Springfield, MA 01104
Tel. 413/827-7600
FAX 413/827-0696
Panol Saws [] [] [] [] [] []
Edgetech Inc.
11933 12 Ave. S.,
Burnsville, MN 55337
Tel. 952/881-1925
FAX 952/881-0374
CTS730 [] [] 5 []
Counter Top Saw
Richard T. Byrnes Co. Inc.,
600 Hannum Ave.,
West Chester, PA 19380
Tel. 610/692-2770
FAX 610/698-0330
Byrnes/Scheer Postform
Saw PA5053
Byrnes/Scheer PA 4000
Byrnes/Scheer PA 7000
Casadei America,
6235 Danville Rd.,
Mississauga,
ONT Canada L5T 2H7
Tel. 877/227-2334
Toll Free FAX 877/227-5157
Casadei
KS 15
Casadei 3400
Casadei KS 3
Casadei KS 32 Plus
Casadei LINEA Plus
Casadei LINEA
Casadei SS 32
Casadei SS 45
Casadei SP 32
Casadei SP 45
Casadei SV 15
Casadei SV 32
Casadei SV 45
CA SV 45 P
CAS SP 45 D
Casadei SP 45 PD
Colonial Saw Co. Inc.,
122 Pembroke St., P.O. Box A,
Kingston, MA 02364
Tel. 781/585-4364
FAX 781/585-9375
Striebig Optisaw 1 Avg. 70 sheets
cut singly, higher
with stacking
Striebig Optisaw Same as above
1-Plus
Striebig Optisaw 2 Same as
above
Striebig Optisaw 3 Same as
above
available
Striebig Optisaw Avg. 100 sheets
Automatic cut singly, higher
with stacking
Striebig Digitron Above, plus increased
accuracy, reduced
waste, higher production,
enhanced versat.
Positron Automatic As above plus approx.
Programmable 25% production
System increase on any model
Striebig WSG Angle- Allows cutting of
Cutting Attachment angles 0-46[degrees] on
vertical saw
DMG - Delmac Machinery Group,
4322 Piedmont Pkwy.,
Greensboro, NC 27410
Tel. 336/854-1211
FAX 336/854-0811
Gabbiani 100+ msf
Sincar/TH
Gabbiani 60-100 msf
Sincar/T
Gabbiani 60-100 msf
Sincar L
E&R System Technik Inc.,
85 St. George Road,
Springfield, MA 01104
Tel. 413/827-7600
FAX 413/827-0696
Panol Saws
Edgetech Inc.
11933 12 Ave. S.,
Burnsville, MN 55337
Tel. 952/881-1925
FAX 952/881-0374
CTS730 Variable
Counter Top Saw
Richard T. Byrnes Co. Inc.,
600 Hannum Ave.,
West Chester, PA 19380
Tel. 610/692-2770
FAX 610/698-0330
Byrnes/Scheer Postform []
Saw PA5053
Byrnes/Scheer PA 4000 5 x 10 to []
5 x 12
Byrnes/Scheer PA 7000 5 x 10 to []
Casadei America, 5 x 12
6235 Danville Rd.,
Mississauga,
ONT Canada L5T 2H7
Tel. 877/227-2334
Toll Free FAX 877/227-5157
Casadei []
KS 15 4' x 8' [] []
Casadei 3400 5' x 11' [] Electrical
Casadei KS 3 5' x 10' [] []
Casadei KS 32 Plus 5' x 10' [] []
Casadei LINEA Plus 5' x 12' [] []
Casadei LINEA 5' x 12' [] []
Casadei SS 32 5' x 10' []
Casadei SS 45 5' x 14' []
Casadei SP 32 5' x 10' []
Casadei SP 45 5' x 14' []
Casadei SV 15 5' x 14' []
Casadei SV 32 5' x 10' []
Casadei SV 45 5' x 14' []
CA SV 45 P 5' x 14' []
CAS SP 45 D 5' x 14' []
Casadei SP 45 PD 5' x 14' []
Colonial Saw Co. Inc.,
122 Pembroke St., P.O. Box A,
Kingston, MA 02364
Tel. 781/585-4364
FAX 781/585-9375
Striebig Optisaw 1 6'3" x 13'9" []
Thickness 0-3-1/8"
Striebig Optisaw Same as above []
1-Plus
Striebig Optisaw 2 Same as above, []
larger sizes avail.
Striebig Optisaw 3 Same as above, []
larger sizes
Striebig Optisaw Same as above, []
Automatic larger sizes
available
Striebig Digitron
Positron Automatic
Programmable
System
Striebig WSG Angle- 4' x 8' x 2",
Cutting Attachment 35" x 8' at
46[degrees]
DMG - Delmac Machinery Group,
4322 Piedmont Pkwy.,
Greensboro, NC 27410
Tel. 336/854-1211
FAX 336/854-0811
Gabbiani 6' x 8' []
Sincar/TH 5' x 18'
Gabbiani 4' x 8' []
Sincar/T 5' x 18'
Gabbiani 4' x 8' []
Sincar L 5' x 18'
E&R System Technik Inc.,
85 St. George Road,
Springfield, MA 01104
Tel. 413/827-7600
FAX 413/827-0696
Panol Saws As reg. [] [] []
Edgetech Inc.
11933 12 Ave. S.,
Burnsville, MN 55337
Tel. 952/881-1925
FAX 952/881-0374
CTS730 Countertops
Counter Top Saw Bar tops
solid surface
Richard T. Byrnes Co. Inc.,
600 Hannum Ave.,
West Chester, PA 19380
Tel. 610/692-2770
FAX 610/698-0330
Byrnes/Scheer Postform Pressure Beam 1
Saw PA5053
Byrnes/Scheer PA 4000 Pressure Beam 1
Byrnes/Scheer PA 7000 Pressure Beam 1
Casadei America,
6235 Danville Rd.,
Mississauga,
ONT Canada L5T 2H7
Tel. 877/227-2334
Toll Free FAX 877/227-5157
Casadei
KS 15 Eccentric clamp 1
Casadei 3400 Eccentric 1
Casadei KS 3 Eccentric 1
Casadei KS 32 Plus Eccentric 1
Casadei LINEA Plus Pressure beam 1
Casadei LINEA Pressure beam 1
Casadei SS 32 Pressure beam 2
Casadei SS 45 Pressure beam 2
Casadei SP 32 Pressure beam 1
clamps
Casadei SP 45 Pressure beam 1
clamps
Casadei SV 15 Pressure beam 1
clamps
Casadei SV 32 Pressure beam 1
clamps
Casadei SV 45 Pressure beam 1
clamps
CA SV 45 P Pressure beam 1
clamps
CAS SP 45 D Pressure beam 1
clamps
Casadei SP 45 PD Pressure beam 1
clamps
Colonial Saw Co. Inc.,
122 Pembroke St., P.O. Box A,
Kingston, MA 02364
Tel. 781/585-4364
FAX 781/585-9375
Striebig Optisaw 1 1
Striebig Optisaw 1
1-Plus
Striebig Optisaw 2 1
Striebig Optisaw 3 1
Striebig Optisaw 1
Automatic
Striebig Digitron
Positron Automatic
Programmable
System
Striebig WSG Angle-
Cutting Attachment
DMG - Delmac Machinery Group,
4322 Piedmont Pkwy.,
Greensboro, NC 27410
Tel. 336/854-1211
FAX 336/854-0811
Gabbiani [] Double 0
Sincar/TH 8" book height
Gabbiani [] Roller, single 0
Sincar/T sheet
Gabbiani [] Roller, single 0
Sincar L sheet
E&R System Technik Inc.,
85 St. George Road,
Springfield, MA 01104
Tel. 413/827-7600
FAX 413/827-0696
Panol Saws [] Pneumatic 1
Edgetech Inc.
11933 12 Ave. S.,
Burnsville, MN 55337
Tel. 952/881-1925
FAX 952/881-0374
CTS730 Pneumatic clamp
Counter Top Saw
Richard T. Byrnes Co. Inc.,
600 Hannum Ave.,
West Chester, PA 19380
Tel. 610/692-2770
FAX 610/698-0330
Byrnes/Scheer Postform
Saw PA5053
Byrnes/Scheer PA 4000 Optimizing, direct linking to
cabinet cut list/side
aligning. Auto. loading, panel
alignment. PC control, front
load, 70mm cutting height
Byrnes/Scheer PA 7000
Casadei America,
6235 Danville Rd.,
Mississauga,
ONT Canada L5T 2H7
Tel. 877/227-2334
Toll Free FAX 877/227-5157
Casadei
KS 15
Casadei 3400
Casadei KS 3
Casadei KS 32 Plus
Casadei LINEA Plus
Casadei LINEA Programmable pusher,
microprocessor.
Casadei SS 32 Same as above
Casadei SS 45 Same as above
Casadei SP 32 Automatic pusher with
floating clamps,
microprocessor.
Casadei SP 45 Same as above
Casadei SV 15 Same as above
Casadei SV 32 Overhead programmable pusher
with floating clamps, side
aligner microprocessor with
video screen
Casadei SV 45 Same as above
CA SV 45 P Same as SV 32, plus rear
loading platform.
CAS SP 45 D Double independent
programmable pusher, floating
clamps, side aligner,
microprocessor with video
screen
Casadei SP 45 PD Rear loading platform, indep.
overhead programmable pusher
with floating clamps, side
alinger, microprocessor w/
video screen.
Colonial Saw Co. Inc.,
122 Pembroke St., P.O. Box A,
Kingston, MA 02364
Tel. 781/585-4364
FAX 781/585-9375
Striebig Optisaw 1 0.004 square accuracy, 15
panel support rollers, full
length center shelf, template
bar, Optiscore main blade
scoring, dust collection
Striebig Optisaw As above plus 2-step roller
1-Plus braking, pat'd. auto lath
shifting system
Striebig Optisaw 2 Above plus fixed dust bag,
wall or free standing mounting
Striebig Optisaw 3 Above plus Supercore separate
scoring sawblade, one-step
motor, one-beam locks, eye-
height measuring, horizontal
micro-adjust
Striebig Optisaw As above, plus auto feed in X
Automatic & Y axes. Independent cut/
return speeds, fully variable
31-78 fpm LED displays and
diagnostics.
Striebig Digitron Digital mesuring system for
all Striebig saws. Rapid cut
set up to 0.005"/0.1mm,
instant inch/metric
conversion, LED display.
Positron Automatic Automatic programmable digital
Programmable stop for all Striebig saws.
System Rapid cut setup from keyboard.
Stop movement up to 20"/
second. Retrofittable.
Striebig WSG Angle- Rapid mounting and
Cutting Attachment dismounting. Unified system
simplifies measuring.
Microadjust to 1/10[degrees].
DMG - Delmac Machinery Group,
4322 Piedmont Pkwy.,
Greensboro, NC 27410
Tel. 336/854-1211
FAX 336/854-0811
Gabbiani Cross cut saw for high
Sincar/TH production strip lines, book
cutting.
Gabbiani Cross cut saw for high
Sincar/T production strip lines, single
sheet cutting
Gabbiani Rip saw for high speed strip
Sincar L lines running at 60-100
meters/min.
E&R System Technik Inc.,
85 St. George Road,
Springfield, MA 01104
Tel. 413/827-7600
FAX 413/827-0696
Panol Saws
Edgetech Inc.
11933 12 Ave. S.,
Burnsville, MN 55337
Tel. 952/881-1925
FAX 952/881-0374
CTS730 Miter cuts, drawbolt cavities,
Counter Top Saw variable speed. Optional dual
laser light guide. Optional
variable mitre with digital
readout. Optional attached
conveyors.
Vertical
CTS740 [] [] 5
(Extended length)
Counter Top Saw
CTR960 [] 3 1/4 []
Counter Top Router
European Woodworking Machinery,
P.O. Box 550,
Franklinton, NC 27525
Tel. 919/494-5197
FAX 919/494-7788
ANTHON PORTA [] 12 30 []
ANTHON LN [] 12 18 []
ANTHON PROFIT [] [] 12 18
ANTHON LNB [] [] 30
ANTHON LNC [] 37 42
ANTHON PVL/PVQ 13 X 5
ANTHON CP [] 2x25
ANTHON POA 25 each
ANTHON POB 30 each
ANTHON POC 40 each
Evans Machinery, Inc.,
5530 N. 51st Ave.,
Glendale, AZ 85301
Tel. 623/934-7294
FAX 623/934-7384
0710 [] 3
Miter Saw optional 1
phase
0700 [] 3 []
Miter Saw optional 1
phase
0750 [] 3 []
Saw Carriage optional 1
phase
Felder Woodworking,
4003 Seaport Blvd.,
Sacramento, CA 95691
Tel. 916/375-3190
K7C [] 4-5.5 []
K7 [] 4-9.5 []
K7F [] 7.5-9.5 []
K7X [] 7.5-9.5 []
Giben America Inc.,
3044 Northwoods Circle,
Norcross, GA 30071
Tel. 770/448-9140
FAX 770/448-9133
Starmatic 850 [] 18-22
Starmatic 1000 [] 18-22
Giben [Prismatic.sup.2] [] 18-22
h100SP
CTS740 [] Variable
(Extended length)
Counter Top Saw
CTS960 Variable
Counter Top Router
European Woodworking Machinery,
P.O. Box 550,
Franklinton, NC 27525
Tel. 919/494-5197
FAX 919/494-7788
ANTHON PORTA [] [] CNC Dep. on
pattern
ANTHON LN [] [] CNC 25 cu. m
[]
ANTHON PROFIT [] [] CNC 60 cu. m
ANTHON LNB [] CNC 100 cu. m.
ANTHON LNC [] CNC 150 cu. m.
ANTHON PVL/PVQ [] CNC Dep. on
thickness
ANTHON CP [] CNC 120mm/book
ANTHON POA [] CNC 100mm/book
ANTHON POB [] CNC 150mm/book
ANTHON POC [] CNC 200mm/book
Evans Machinery, Inc.,
5530 N. 51st Ave.,
Glendale, AZ 85301
Tel. 623/934-7294
FAX 623/934-7384
0710 [] Varies
Miter Saw
0700 Varies
Miter Saw
0750 Varies
Saw Carriage
Felder Woodworking,
4003 Seaport Blvd.,
Sacramento, CA 95691
Tel. 916/375-3190
K7C Med. prod.
K7 High prod.
K7F High prod.
K7X High prod.
Giben America Inc.,
3044 Northwoods Circle,
Norcross, GA 30071
Tel. 770/448-9140
FAX 770/448-9133
Starmatic 850 [] Intel PC Variable based on
cutting pattern &
oper. involvement.
Starmatic 1000 [] Intel PC Same as above.
Giben [Prismatic.sup.2] [] Intel PC Same as above.
h100SP
Hydraulic
CTS740 Countertops
(Extended length) Bar tops
Counter Top Saw solid surface
CTS960 Countertops
Counter Top Router Bar tops
solid surface
European Woodworking Machinery,
P.O. Box 550,
Franklinton, NC 27525
Tel. 919/494-5197
FAX 919/494-7788
ANTHON PORTA 4' X 10' up to
8' X 21"
ANTHON LN 4' X 10' up to []
7' X 18'
ANTHON PROFIT 5' X 10' up to []
8' X 18'
ANTHON LNB 5' X 12' up to []
11' X 21'
ANTHON LNC 5' X 12' up to []
11' X 21'
ANTHON PVL/PVQ 4' X 10' up to []
8' X 16'
ANTHON CP 21' cut length []
ANTHON POA 12x100' width
ANTHON POB See above
ANTHON POC See above
Evans Machinery, Inc.,
5530 N. 51st Ave.,
Glendale, AZ 85301
Tel. 623/934-7294
FAX 623/934-7384
0710 Countertops,
Miter Saw Bar Tops. 50"
cross cut
0700 same
Miter Saw
0750 same
Saw Carriage
Felder Woodworking,
4003 Seaport Blvd.,
Sacramento, CA 95691
Tel. 916/375-3190
K7C 8 x 4 [] []
K7 8 x 4 [] []
K7F 8 x 4 [] []
K7X 10 x 4 [] []
Giben America Inc.,
3044 Northwoods Circle,
Norcross, GA 30071
Tel. 770/448-9140
FAX 770/448-9133
Starmatic 850 Cutting capacity []
Rip & Crosscut
10.8' x 11'
12.4' x 11'
12.4 x 13.2'
14.7 x 13.2'
Starmatic 1000 Same as above. []
Giben [Prismatic.sup.2] Same as above. []
h100SP
Pneumatic
CTS740 Pneumatic clamp
(Extended length)
Counter Top Saw
CTS960 Pneumatic clamp
Counter Top Router
European Woodworking Machinery,
P.O. Box 550,
Franklinton, NC 27525
Tel. 919/494-5197
FAX 919/494-7788
ANTHON PORTA Beam & rolls 2
ANTHON LN Pressure beam & 1
pneumatic
cylinders
ANTHON PROFIT Pressure beam & 2
pneumatic cylinders
ANTHON LNB Pressure beam & 1
pneumatic cylinders
ANTHON LNC Pressure beam & 1
pneumatic cylinders
ANTHON PVL/PVQ Pneumatic cylinders 1
ANTHON CP Pressure beam &
clamps
ANTHON POA Pressure beam &
clamps
ANTHON POB See above
ANTHON POC See above
Evans Machinery, Inc.,
5530 N. 51st Ave.,
Glendale, AZ 85301
Tel. 623/934-7294
FAX 623/934-7384
0710 Optional 1
Miter Saw Pneumatic
clamps
0700 same 1
Miter Saw
0750 Manual 1
Saw Carriage
Felder Woodworking,
4003 Seaport Blvd.,
Sacramento, CA 95691
Tel. 916/375-3190
K7C Eccentric clamp 1
K7 Eccentric clamp 1
K7F Eccentric clamp 1
K7X Eccentric clamp 1
Giben America Inc.,
3044 Northwoods Circle,
Norcross, GA 30071
Tel. 770/448-9140
FAX 770/448-9133
Starmatic 850 Special pneumatic 1
pressure beam
eliminates need for
aux. clamping
cylinders for last cut
Starmatic 1000 Same as above. 1
Giben [Prismatic.sup.2] Patented pneumatic 1
h100SP split pressure beam
eliminates need for
aux. clamping cylinders
for last cut
CTS740 Extended length saw for larger
(Extended length) cutting capacity. Mitre cuts,
Counter Top Saw drawbolt cavities, variable speed.
Optional dual laser light guide,
optional variable mitre with digital
readout, optional 5th router
Optional 20" blade, optional
attached conveyors.
CTS960 Cuts openings in countertops for
Counter Top Router sinks & rangetops. Makes laminate
endcaps & sidesplash blocks. Cuts
rectangular openings w/o template
European Woodworking Machinery,
P.O. Box 550,
Franklinton, NC 27525
Tel. 919/494-5197
FAX 919/494-7788
ANTHON PORTA Automatic feeding and acking is
possible, side aligners.
ANTHON LN Patented turn table for head
cutting, data transfer from
external PC via interface to saw
computer, special clamps, side
aligners, various systems of
feeding and stacking depend, on
requirements, PC-control
optimizing system, waste disposal.
ANTHON PROFIT Same as above
ANTHON LNB Same as ANTHON LN
ANTHON LNC Same as ANTHON LN
ANTHON PVL/PVQ Multiple rip of X-cutting saw for
single sheets.
ANTHON CP Allen Bradley or Siemens PLC,
Visualization, turntable for head cuts
feeding systems, stacking systems,
postforming saw, optimization, AC-
Servo motors for programmable
pusher, THK guiding system
ANTHON POA Allen Bradley or Siemens PLC,
visualization, feeding systems,
stacking systems, optimization, THK
guiding system
ANTHON POB See above
ANTHON POC See above
Evans Machinery, Inc.,
5530 N. 51st Ave.,
Glendale, AZ 85301
Tel. 623/934-7294
FAX 623/934-7384
0710 Preset for 90, 45 and 22-1/2 degree
Miter Saw cuts on counterops 5' x 8' table with
extensions for long tops. Air
operated safety guard. Variable speed
0700 Preset for 90, 45 and 22-1/2 degree
Miter Saw cuts on counterops 5' x 8' table with
extensions for long tops. Air
operated safety guard.
0750 Carriage assembly only without
Saw Carriage legs or mitered top.
Felder Woodworking,
4003 Seaport Blvd.,
Sacramento, CA 95691
Tel. 916/375-3190
K7C Patented sliding table guiding system
digital controlled tilting&height adj.
K7 Same as above
K7F Same as above
K7X Same as above
Giben America Inc.,
3044 Northwoods Circle,
Norcross, GA 30071
Tel. 770/448-9140
FAX 770/448-9133
Starmatic 850 Giben saws feature symmetrical saw
carriage guidance system w// no
lubrication or periodic adjustment req.
to maintain 90[degrees] blade
orientation, patented side alignment
air tables, ext. scoring saw adj., post
form option.
Starmatic 1000 Same as above.
Giben [Prismatic.sup.2] High-speed saw carriage & pusher
h100SP quick blade change sys., electronic
scoring adj., 2 postform scoring sys.
adv. diagnostics, auto side align, auto
job-to-job mach. adj., workcell integr.
Giben Prismatic [2] h100SPT [] 18-22
Giben Prismatic [2] h115SP [] 22
Giben Prismatic [2] h115SPT [] 22
Giben [Prismatic.sup.301] SP [] 24-30
Giben [Prismatic.sup.301] SPT [] 24-30
Formula X SP [] 30
Formula X SPT [] 30
Formula XY SP [] 30
Formula XY SPT [] 30
401 Matic SP [] 36
401 Matic SPT [] 36
Giben Sigmatic 100 [] 18-22
Giben Sigmatic 115 [] 22
Sigmatic 301 [] 30
Formula S [] 30
Supermatic 17 [] 48
Supermatic 19 [] 48
Hypermatic 17 [] 60
Hypermatic 19 [] 60
Tetramatic [] 2x30
Globe Machine Mfg. Co.,
P.O. Box 2274, Tacoma, WA 98401
Tel. 253/383-2584
FAX 253/572-9672
Globe Sawlines 10/25,
and Specialty or as
Sawlines for plywood required
Globe Finishing and 10/200
CTS systems for or as
MDF, PB, OSL, and OSB required
Globe First-pass 10/25
or Skinner Saw, or as
Model 16A required
Model 16 H
Globe First-pass See above
or Skinner Saw,
Model 16B
Globe Specialty Saw, 40-200 bottom
Model 16AB and/or top arbor
or as required
Globe Second-pass 10/25
or Equalizer Saw, or as
Model 13H required
Globe Scarf Saw,
Model 13T
Globe Cut-off Saw, [] [] 10/20 or
Model 13Q as required
Globe Flying Cut-off [] 10/20 or
Model 13 R as required
Burelbach Gang Rip 20/100
Saw, Model 60R
Globe Specialty Saw, 10/20 copes
Model 16Q 40/60 dadoes
or as required
Model 16R
Globe Rough Sawn 20 or as
Machine, Model 16Y required
Globe Specialty Saw 10/20 copes
Model 16T 40/60 dadoes
20 rough sawn
or as required
Globe Sander/ Depends on
Specialty Saw, application
Models 16TS
and 16 QS
Hendrick RWH Industries Inc.,
36 Commercial St., Salem, MA 01970
Tel. 978/741-3600
FAX 978/744-0242
Hendrick PRO-V [] 7.5 hp
Hendrick PRO-AM [] 15 hp
Patriot [] [] 15 hp
20 hp
Rail Saw 5 hp
Giben Prismatic [2] h100SPT [] Intel PC
Giben Prismatic [2] h115SP [] Intel PC
Giben Prismatic [2] h115SPT [] Intel PC
Giben [Prismatic.sup.301] SP [] lntel PC
Giben [Prismatic.sup.301] SPT [] lntel PC
Formula X SP [] Intel PC
Formula X SPT [] Intel PC
Formula XY SP [] Intel PC
Formula XY SPT [] Intel PC
401 Matic SP [] Intel PC
401 Macic SPT [] Intel PC
Giben Sigmatic 100 [] Intel PC
Giben Sigmatic 115 [] Intel PC
Sigmatic 301 [] Intel PC
Formula S [] Intel PC
Supermatic 17 [] Intel PC
Supermatic 19 [] Intel PC
Hypermatic 17 [] Intel PC
Hypermatic 19 [] Intel PC
Tetramatic [] Intel PC
Globe Machine Mfg. Co.,
P.O. Box 2274, Tacoma, WA 98401
Tel. 253/383-2584
FAX 253/572-9672
Globe Sawlines [] []
and Specialty
Sawlines for plywood
Globe Finishing and [] []
CTS systems for
MDF, PB, OSL, and OSB
Globe First-pass [] []
or Skinner Saw,
Model 16A
Model 16 H
Globe First-pass [] []
or Skinner Saw,
Model 16B
Globe Specialty Saw, [] []
Model 16AB
Globe Second-pass [] []
or Equalizer Saw,
Model 13H
Globe Scarf Saw,
Model 13T
Globe Cut-off Saw, [] [] []
Model 13Q
Globe Flying Cut-off
Model 13 R
Burelbach Gang Rip [] []
Saw, Model 60R
Globe Specialty Saw, [] []
Model 16Q
Model 16R
Globe Rough Sawn [] []
Machine, Model 16Y
Globe Specialty Saw [] []
Model 16T
Globe Sander/ [] []
Specialty Saw,
Models 16TS
and 16 QS
Hendrick RWH Industries Inc.,
36 Commercial St., Salem, MA 01970
Tel. 978/741-3600
FAX 978/744-0242
Hendrick PRO-V [] []
Hendrick PRO-AM [] NC
Patriot [] [] [] CNC
Rail Saw [] []
Giben Prismatic [2] h100SPT Same as above. Same as above.
Giben Prismatic [2] h115SP Same as above. Same as above.
Giben Prismatic [2] h115SPT Same as above. Same as above.
Giben [Prismatic.sup.301] SP Same as above. Same as above.
Giben [Prismatic.sup.301] SPT Same as above. Same as above.
Formula X SP Same as above. Same as above.
Formula X SPT Same as above. Same as above.
Formula XY SP Same as above. Same as above.
Formula XY SPT Same as above. Same as above.
401 Matic SP Same as above. Same as above.
401 Macic SPT Same as above. Same as above.
Giben Sigmatic 100 Same as above. Same as above.
Giben Sigmatic 115 Same as above. Same as above.
Sigmatic 301 Same as above. Same as above.
Formula S Same as above. Same as above.
Supermatic 17 Same as above. Same as above.
Supermatic 19 Same as above. Same as above.
Hypermatic 17 Same as above. Same as above.
Hypermatic 19 Same as above. Same as above.
Tetramatic Same as above. Same as above.
Globe Machine Mfg. Co.,
P.O. Box 2274, Tacoma, WA 98401
Tel. 253/383-2584
FAX 253/572-9672
Globe Sawlines Varies according 3' x 5' wide
and Specialty to sizes and 6' x 10' long
Sawlines for plywood configuration 1/8" - 1-1/2"
thick, or as
required
Globe Finishing and Varies accd. to 3' x 9' wide
CTS systems for cutting patterns 6' x 35' long
MDF, PB, OSL, and OSB and configuration 1/8" - 6" thick
Globe First-pass Variable 12" x 66" wide
or Skinner Saw, 4' x 35' long
Model 16A
54" max. wide
Model 16 H 2' X 35' long
Globe First-pass Variable 3' x 9' wide
or Skinner Saw, 4' x 35' long
Model 16B or as required
Globe Specialty Saw, Variable 3' x 8' wide
Model 16AB 4' x 60' long
or as required
Globe Second-pass Variable 3' x 9' wide
or Equalizer Saw, 6' x 35' long
Model 13H or as required
Globe Scarf Saw,
Model 13T
Globe Cut-off Saw, Variable 4' x 10'
Model 13Q
Globe Flying Cut-off Variable All material
Model 13 R width
Burelbach Gang Rip 24,000 - 144,000 62" max. width
Saw, Model 60R lineal feet 44" min. length
1/8 - 2" thick
Globe Specialty Saw, Variable 50" wide max.
Model 16Q
Model 16R 63" wide max.
Globe Rough Sawn Variable 50" or 63"
Machine, Model 16Y wide max.
Globe Specialty Saw Variable 50" or 63"
Model 16T wide max.
Globe Sander/ Variable 50" or 63"
Specialty Saw, wide max.
Models 16TS
and 16 QS
Hendrick RWH Industries Inc.,
36 Commercial St., Salem, MA 01970
Tel. 978/741-3600
FAX 978/744-0242
Hendrick PRO-V Med. prod. 10'6"
Hendrick PRO-AM High prod. 12'6"
Patriot High prod. up to 18.3'
Rail Saw Variable 12'6", 6" depth
Type of
Tilt
Hydraulic Manual
Giben Prismatic [2] h100SPT []
Giben Prismatic [2] h115SP []
Giben Prismatic [2] h115SPT []
Giben [Prismatic.sup.301] SP []
Giben [Prismatic.sup.301] SPT []
Formula X SP []
Formula X SPT []
Formula XY SP []
Formula XY SPT []
401 Matic SP []
401 Macic SPT []
Giben Sigmatic 100 []
Giben Sigmatic 115 []
Sigmatic 301 []
Formula S []
Supermatic 17 []
Supermatic 19 []
Hypermatic 17 []
Hypermatic 19 []
Tetramatic []
Globe Machine Mfg. Co.,
P.O. Box 2274, Tacoma, WA 98401
Tel. 253/383-2584
FAX 253/572-9672
Globe Sawlines []
and Specialty
Sawlines for plywood
Globe Finishing and []
CTS systems for
MDF, PB, OSL, and OSB
Globe First-pass []
or Skinner Saw,
Model 16A
[]
Model 16 H
Globe First-pass []
or Skinner Saw,
Model 16B
Globe Specialty Saw, []
Model 16AB
Globe Second-pass []
or Equalizer Saw,
Model 13H
Globe Scarf Saw,
Model 13T
Globe Cut-off Saw, []
Model 13Q
Globe Flying Cut-off []
Model 13 R
Burelbach Gang Rip
Saw, Model 60R
Globe Specialty Saw,
Model 16Q
Model 16R
Globe Rough Sawn
Machine, Model 16Y
Globe Specialty Saw
Model 16T
Globe Sander/
Specialty Saw,
Models 16TS
and 16 QS
Hendrick RWH Industries Inc.,
36 Commercial St., Salem, MA 01970
Tel. 978/741-3600
FAX 978/744-0242
Hendrick PRO-V []
Hendrick PRO-AM []
Patriot [] []
Rail Saw
Giben Prismatic [2] h100SPT Patented pneumatic 1
dbl pressure beam
eliminates need for
aux. clamping
device or cur out
sections in beam
Giben Prismatic [2] h115SP Same as above 1
Giben Prismatic [2] h115SPT Same as above 1
Giben [Prismatic.sup.301] SP Same as above 1
Giben [Prismatic.sup.301] SPT Same as above 1
Formula X SP Same as above 1
Formula X SPT Same as above 1
Formula XY SP Same as above 1
Formula XY SPT Same as above 1
401 Matic SP Same as above 1
401 Macic SPT Same as above 1
Giben Sigmatic 100 Same as above
Giben Sigmatic 115 Same as above
Sigmatic 301 Same as above
Formula S Same as above
Supermatic 17 Same as above
Supermatic 19 Same as above
Hypermatic 17 Same as above
Hypermatic 19 Same as above
Tetramatic Same as above
Globe Machine Mfg. Co.,
P.O. Box 2274, Tacoma, WA 98401
Tel. 253/383-2584
FAX 253/572-9672
Globe Sawlines Overhead, air or
and Specialty spring loaded
Sawlines for plywood wheels, height
adj. by motor
or handwheel
Globe Finishing and See above
CTS systems for
MDF, PB, OSL, and OSB
Globe First-pass Overhead, spring
or Skinner Saw, loaded wheels,
Model 16A mounted in top frame,
height adjustment by
Model 16 H motorized jack
Globe First-pass Overhead, air or
or Skinner Saw, spring loaded
Model 16B wheels, common
height adjustment by
motor or handwheel
Globe Specialty Saw, See above
Model 16AB
Globe Second-pass
or Equalizer Saw,
Model 13H
Globe Scarf Saw,
Model 13T
Globe Cut-off Saw, Pneumatic
Model 13Q bar clamp
Globe Flying Cut-off Spring or air loaded
Model 13 R wheels or rolls
when required
Burelbach Gang Rip Spring
Saw, Model 60R
Globe Specialty Saw, Spring loaded wheels
Model 16Q common height adjust
by ratchet or motor.
Model 16R
Globe Rough Sawn See above
Machine, Model 16Y
Globe Specialty Saw See above
Model 16T
Globe Sander/ See above
Specialty Saw,
Models 16TS
and 16 QS
Hendrick RWH Industries Inc.,
36 Commercial St., Salem, MA 01970
Tel. 978/741-3600
FAX 978/744-0242
Hendrick PRO-V Pneumatic 1
Hendrick PRO-AM Pneumatic 1
Patriot Pneumatic 1
Rail Saw Pneumatic
Giben Prismatic [2] h100SPT Same as Prismatic SP plus
patented gripper infeed system,
patented thin mat'l loading
device, flexible infeed solutions,
12-ton lift table
Giben Prismatic [2] h115SP Same as above
Giben Prismatic [2] h115SPT Same as above
Giben [Prismatic.sup.301] SP Same as above
Giben [Prismatic.sup.301] SPT Same as above
Formula X SP Same plus Incorporation of PM System
CNC controlled grippers and G-Drive
RT real time graphics.
Formula X SPT Same as above
Formula XY SP Same as above
Formula XY SPT Same as above
401 Matic SP Same as above
401 Macic SPT Same as above
Giben Sigmatic 100 Same as above
Giben Sigmatic 115 Same as above
Sigmatic 301 Same as above
Formula S Same as above
Supermatic 17 Same as above
Supermatic 19 Same as above
Hypermatic 17 Same as above
Hypermatic 19 Same as above
Tetramatic Same as above
Globe Machine Mfg. Co.,
P.O. Box 2274, Tacoma, WA 98401
Tel. 253/383-2584
FAX 253/572-9672
Globe Sawlines Fully automated plant with optional
and Specialty saw setworks controls; completely
Sawlines for plywood programmed; configured to cust.
needs; all panel feeding, sawing,
stacking, handling, and packaging
equip. provided to suit application
Globe Finishing and See above
CTS systems for
MDF, PB, OSL, and OSB
Globe First-pass Fixed or variable speed roll-type
or Skinner Saw, feedworks. 2 or 3 individually
Model 16A driven saws. Heavy-duty cast and
machined side and top frames
Model 16 H
Globe First-pass Fixed or variable speed roll-type
or Skinner Saw, feedworks. 2 to 5 individually
Model 16B driven saws. Opt. automated saw
setworks controls. High precision,
low friction setworks bearings.
Globe Specialty Saw, Fixed or variable speed roll-type
Model 16AB feedworks. Bottom and/or top
common arbors for complex
ripping and machining.
Globe Second-pass Fixed or variable speed chain-type
or Equalizer Saw, feedworks. 2 or more individually
Model 13H driven saws. Opt. automated saw
Globe Scarf Saw, setworks controls. High precision,
Model 13T low friction setworks bearings.
Globe Cut-off Saw, See above
Model 13Q
Globe Flying Cut-off High precision, low friction
Model 13 R overSaw, overhead, saw carriage
bearings
Burelbach Gang Rip Steel feed rolls (polyurethane opt.)
Saw, Model 60R Adj. steel pinch rolls. Arbor avail.
as lift out or cantilever. Variable
saw RPM. Built-in anti-kickback
fingers Built-in dust hoods.
Globe Specialty Saw, For T & G and special edge profiles,
Model 16Q face grooving, and/or ripping.
Configurable with or w/o side copes
Model 16R or dado arbor. High sp. copes opt.
Globe Rough Sawn Rough sawn bottom face texturing
Machine, Model 16Y for siding and other products.
Globe Specialty Saw Combines Globe's Model 16Q and
Model 16T 16Y saws for multi-featured
single-pass panel processing.
Globe Sander/ Combines 16Q 16R or 16T with
Specialty Saw, Sander Model 35D for multi-
Models 16TS featured, single pass panel
and 16 QS processing.
Hendrick RWH Industries Inc.,
36 Commercial St., Salem, MA 01970
Tel. 978/741-3600
FAX 978/744-0242
Hendrick PRO-V Bevel; single blade scoring
and cutoff.
Hendrick PRO-AM Solid back table, air flotation,
high speed back fence, material
grabbers
Patriot Same as above
Rail Saw 1" dado capacity,
custom configuration
Hofer,
P.O. Box 832100,
Delray Beach, FL 33483
Tel. 561/265-3635
FAX 561/265-1240
Hofer PM Electronic [] []
panel saw
Holz-Her,
5120 Westinghouse Blvd.,
Charlotte, NC 28273
Tel. 704/587-3400
FAX 704/587-3412
#1265S [] 4 hp []
#1225 [] 7.5 hp []
#1230 [] 7.5 hp
#1265 [] 4 hp []
#1270 [] 4 hp
#1243 [] 10 hp []
Exacta [] 10 hp
Accura [] 12 hp
TEMPUS [] [] 18 hp
Holzma=U.S., Div. of
Stiles Machinery Inc.,
Tulip Drive, P.O. Box 2756,
Gastonia, NC 28052
Tel. 704/861-8239
FAX 704/867-4140
HPP 81 Optimat [] 24 hp
HPP 82 Optimat [] 24
HPP 11 Optimat [] 28 hp
HPP-23 [] 40 hp
0HPL-11 [] 28 hp
HPL-23 [] 40 hp
HPL-33 [] 58 hp
HFL-33 Fixomat [] 58 hp
ECONOLIFT Infeed
Device
Laguna Tools Inc.,
17101 Murphy Ave.,
Irvine, CA 92614
Tel.800/234-1976 or
949/474-1200
FAX 949/474-0150
Robland Z3200 [] 7.5 hp []
Robland Z2500 [] 7.5 hp []
Robland Z1700 [] 7.5 hp []
Z3800 [] 7.5 hp []
Harwi Giraffe 1550 [] 3 hp []
Harwi Dolphin 1500 [] 4 hp []
Lobo Machinery Corp.,
9034 Bermudez St.,
Pico Rivera, CA 90660
Tel. 562/949-3741
FAX 562/948-4171
SC-H5 [] 4 hp []
TSP-3200 [] [] 9 hp []
TSP-125 [] 12 hp
TSP-10C [] 10 hp
TRS 1014 [] 50-60 hp
Martin Woodworking Machines Corp.,
8107-R Arrowridge Blvd.,
Charlotte, NC 28273
Tel. 704/525-3963
FAX 704/525-3443
Martin T-72 A [] [] 7.5 []
Mayer USA,
4609 Dwight Evans Rd.,
Charlotte, NC 28217
Tel. 704/522-7870
FAX 704/522-9438
PS2Z [] up to 100 hp
PS92 [] 19 hp
Hofer,
P.O. Box 832100,
Delray Beach, FL 33483
Tel. 561/265-3635
FAX 561/265-1240
Hofer PM Electronic [] []
panel saw
Holz-Her,
5120 Westinghouse Blvd.,
Charlotte, NC 28273
Tel. 704/587-3400
FAX 704/587-3412
#1265S Med. prod.
#1225 Med. prod.
#1230 [] High prod.
#1265 Med. prod.
#1270 [] Med. prod.
#1243 Med. prod.
Exacta [] CNC 150-200 panels
Accura [] CNC 200-250 panels
TEMPUS [] CNC 250+
Holzma=U.S., Div. of
Stiles Machinery Inc.,
Tulip Drive, P.O. Box 2756,
Gastonia, NC 28052
Tel. 704/861-8239
FAX 704/867-4140
HPP 81 Optimat CNC 250 panels and up
HPP 82 Optimat CNC 300 panels and up
HPP 11 Optimat CNC 350 panels and up
HPP-23 CNC 500 panels and up
HPL-11 CNC 500 panels and up
HPL-23 CNC 650 panels and up
HPL-33 CNC 750 panels and up
HFL-33 Fixomat CNC 1500 panels and up
ECONOLIFT Infeed
Device
Laguna Tools Inc.,
17101 Murphy Ave.,
Irvine, CA 92614
Tel.800/234-1976 or
949/474-1200
FAX 949/474-0150
Robland Z3200
Robland Z2500
Robland Z1700
Z3800
Harwi Giraffe 1550
Harwi Dolphin 1500
Lobo Machinery Corp.,
9034 Bermudez St.,
Pico Rivera, CA 90660
Tel. 562/949-3741
FAX 562/948-4171
SC-H5 Medium
TSP-3200 Medium
TSP-125 [] CNC 150-400 panel
TSP-10C [] CNC 350-450
TRS 1014 [] 2000 panel
Martin Woodworking Machines Corp.,
8107-R Arrowridge Blvd.,
Charlotte, NC 28273
Tel. 704/525-3963
FAX 704/525-3443
Martin T-72 A [] [] []
Mayer USA,
4609 Dwight Evans Rd.,
Charlotte, NC 28217
Tel. 704/522-7870
FAX 704/522-9438
PS2Z [] CNC
PS92 [] CNC
Hofer,
P.O. Box 832100,
Delray Beach, FL 33483
Tel. 561/265-3635
FAX 561/265-1240
Hofer PM Electronic []
panel saw
Holz-Her,
5120 Westinghouse Blvd.,
Charlotte, NC 28273
Tel. 704/587-3400
FAX 704/587-3412
#1265S 129" x 62" []
#1225 209" x 83" []
#1230 209" x 83" []
#1265 169" x 73" []
#1270 169" x 73" []
#1243 5' x 10' []
Exacta 10' x 10',3" thick 1.5 hp
Accura 10' x 10',3" thick 1.5 hp
TEMPUS 14' x 14' 3 hp
Holzma=U.S., Div. of
Stiles Machinery Inc.,
Tulip Drive, P.O. Box 2756,
Gastonia, NC 28052
Tel. 704/861-8239
FAX 704/867-4140
HPP 81 Optimat 5' x 12' up to 3" []
thick
HPP 82 Optimat 5' x 12' up to []
3-3/4" thick
HPP 11 Optimat 5' x 12' up to 4.5' []
thick
HPP-23 5' x 12' up to []
5.25" thick
HPL-11 5' x 12' []
Up to 4.5" thick
HPL-23 5' x 12' up to []
5.25" thick
HPL-33 5' x 12' Up []
to 6.25" thick
HFL-33 Fixomat 5' x 12' up []
to 6.25" thick
ECONOLIFT Infeed 5' x 12' down to
Device 1/8" thick
Laguna Tools Inc.,
17101 Murphy Ave.,
Irvine, CA 92614
Tel.800/234-1976 or
949/474-1200
FAX 949/474-0150
Robland Z3200 10' length 3/4 hp
Robland Z2500 8' length 3/4 hp
Robland Z1700 50' length 3/4 hp
Z3800 12' panels 3/4 hp
Harwi Giraffe 1550 10' panels
Harwi Dolphin 1500 10' panels []
Lobo Machinery Corp.,
9034 Bermudez St.,
Pico Rivera, CA 90660
Tel. 562/949-3741
FAX 562/948-4171
SC-H5 129" x 62" []
TSP-3200 5' x 10' []
TSP-125 12' max 2 hp
3" thick
TSP-10C 10' max length 2 hp
TRS 1014 5' width
Martin Woodworking Machines Corp.,
8107-R Arrowridge Blvd.,
Charlotte, NC 28273
Tel. 704/525-3963
FAX 704/525-3443
Martin T-72 A 5' x 10' [] []
Mayer USA,
4609 Dwight Evans Rd.,
Charlotte, NC 28217
Tel. 704/522-7870
FAX 704/522-9438
PS2Z up tp 24 ft []
PS92 up tp 18 ft []
Hofer,
P.O. Box 832100,
Delray Beach, FL 33483
Tel. 561/265-3635
FAX 561/265-1240
Hofer PM Electronic
panel saw
Holz-Her,
5120 Westinghouse Blvd.,
Charlotte, NC 28273
Tel. 704/587-3400
FAX 704/587-3412
#1265S Pressure shoe
#1225 Pressure shoe
#1230 Pressure shoe
#1265 Pressure shoe
#1270 Pressure shoe
#1243 [] Mechanical or pneumatic
Exacta Pressure beam
Accura Pressure beam
TEMPUS Pressure beam
Holzma=U.S., Div. of
Stiles Machinery Inc.,
Tulip Drive, P.O. Box 2756,
Gastonia, NC 28052
Tel. 704/861-8239
FAX 704/867-4140
HPP 81 Optimat Pressure beam
HPP 82 Optimat Pressure beam
HPP 11 Optimat Pressure beam
HPP-23 Pressure beam
HPL-11 Pressure beam
HPL-23 Pressure beam
HPL-33 Pressure beam
HFL-33 Fixomat Pressure beam
ECONOLIFT Infeed
Device
Laguna Tools Inc.,
17101 Murphy Ave.,
Irvine, CA 92614
Tel.800/234-1976 or
949/474-1200
FAX 949/474-0150
Robland Z3200 [] Manual
Robland Z2500 [] Manual
Robland Z1700 [] Manual
Z3800 [] Manual
Harwi Giraffe 1550
Harwi Dolphin 1500
Lobo Machinery Corp.,
9034 Bermudez St.,
Pico Rivera, CA 90660
Tel. 562/949-3741
FAX 562/948-4171
SC-H5 Pressure shoe
TSP-3200 []
TSP-125 Air pressure beam
TSP-10C Air pressure beam
TRS 1014 Roller
Martin Woodworking Machines Corp.,
8107-R Arrowridge Blvd.,
Charlotte, NC 28273
Tel. 704/525-3963
FAX 704/525-3443
Martin T-72 A Pneumatic
Mayer USA,
4609 Dwight Evans Rd.,
Charlotte, NC 28217
Tel. 704/522-7870
FAX 704/522-9438
PS2Z Pneumatic
PS92 [] Pneumatic
Hofer,
P.O. Box 832100,
Delray Beach, FL 33483
Tel. 561/265-3635
FAX 561/265-1240
Hofer PM Electronic
panel saw
Holz-Her,
5120 Westinghouse Blvd.,
Charlotte, NC 28273
Tel. 704/587-3400
FAX 704/587-3412
#1265S
#1225 1
#1230 1
#1265
#1270 1
#1243
Exacta 1
Accura 1
TEMPUS 1
Holzma=U.S., Div. of
Stiles Machinery Inc.,
Tulip Drive, P.O. Box 2756,
Gastonia, NC 28052
Tel. 704/861-8239
FAX 704/867-4140
HPP 81 Optimat 1
HPP 82 Optimat 1
HPP 11 Optimat 1
HPP-23 1
HPL-11 1
HPL-23 1
HPL-33 1
HFL-33 Fixomat 2
ECONOLIFT Infeed
Device
Laguna Tools Inc.,
17101 Murphy Ave.,
Irvine, CA 92614
Tel.800/234-1976 or
949/474-1200
FAX 949/474-0150
Robland Z3200 1
Robland Z2500
Robland Z1700
Z3800
Harwi Giraffe 1550
Harwi Dolphin 1500
Lobo Machinery Corp.,
9034 Bermudez St.,
Pico Rivera, CA 90660
Tel. 562/949-3741
FAX 562/948-4171
SC-H5
TSP-3200 1
TSP-125 1
TSP-10C 1
TRS 1014 1
Martin Woodworking Machines Corp.,
8107-R Arrowridge Blvd.,
Charlotte, NC 28273
Tel. 704/525-3963
FAX 704/525-3443
Martin T-72 A 1
Mayer USA,
4609 Dwight Evans Rd.,
Charlotte, NC 28217
Tel. 704/522-7870
FAX 704/522-9438
PS2Z 1-2
PS92 1-2
Hofer,
P.O. Box 832100,
Delray Beach, FL 33483
Tel. 561/265-3635
FAX 561/265-1240
Hofer PM Electronic
panel saw
Holz-Her,
5120 Westinghouse Blvd.,
Charlotte, NC 28273
Tel. 704/587-3400
FAX 704/587-3412
#1265S Space saver; fast; accurate;
built-in
measuring system; vert. and horiz.
cuts; tip guide; hinge support
rail
double stops; Index from asides.
Many accessories are available w/
these saws.
#1225 Solid Surface
#1230 Programmable
#1265 Same as above
#1270 Same as above
#1243 Steel guideways, 5-yr, warrenty
Exacta Program fence with clamps; side
aligment device; cutting length
limiter, Includes DELL PC.
Accura High speed program fence with
clamps; air flotation tables; high
speed saw carriage; side align-
ment device; cutting length
limiter;
can be programmed from office;
optimlzation program available.
Includes DELL PC.
TEMPUS Same as above plus lift table
available.
Includes DELL PC
Holzma=U.S., Div. of
Stiles Machinery Inc.,
Tulip Drive, P.O. Box 2756,
Gastonia, NC 28052
Tel. 704/861-8239
FAX 704/867-4140
HPP 81 Optimat PC-based Cadmatic 3.0 control
w/static
& dynamic graphic deplay.
Cut/groove
capability, auto cutting height &
length
auto side pressure device.
Magnetic
measuring system, Ability to add
on-
line label printing.
HPP 82 Optimat Same as above.
HPP 11 Optimat Same as above w/o
cut.groove capability
HPP-23 Same as above w/o
cut/groove capability
HPL-11 Fully automatic infeed system with
Microfeed thin panel infeed
device,
as well as above listed features
HPL-23 Sea above
HPL-33 See above
HFL-33 Fixomat Two saw angular system with
fully automatic infeed, rip saw,
full intermediate table, cross cut
saw, integrated headcut system
(standard). Cadmatic 3.0 PC-based
control
with static & dynamic graphic
display.
Microfeed thin panel infeed system
(standard). Magnetic measuring
system.
ECONOLIFT Infeed Automatic infeed system for front
Device loading panel saws. Can be added
to existing machines. Esp. useful
for short runs, head cut pattems,
and mixed materials. Can improve
saw productivity by 30 -40%
Laguna Tools Inc.,
17101 Murphy Ave.,
Irvine, CA 92614
Tel.800/234-1976 or
949/474-1200
FAX 949/474-0150
Robland Z3200
Robland Z2500 18" blade diametr, 54" rip,
9' telescoping cut off fence
Robland Z1700 Same as above.
Z3800 Same as above.
Harwi Giraffe 1550 Flip away grids metric or American
standard tape, vert. & horiz.
cutting.
Harwi Dolphin 1500 Same as above.
Lobo Machinery Corp.,
9034 Bermudez St.,
Pico Rivera, CA 90660
Tel. 562/949-3741
FAX 562/948-4171
SC-H5
TSP-3200
TSP-125
TSP-10C
TRS 1014
Martin Woodworking Machines Corp.,
8107-R Arrowridge Blvd.,
Charlotte, NC 28273
Tel. 704/525-3963
FAX 704/525-3443
Martin T-72 A Angular tilting
Mayer USA,
4609 Dwight Evans Rd.,
Charlotte, NC 28217
Tel. 704/522-7870
FAX 704/522-9438
PS2Z Custom configurations available.
PS92 Custom configurations available.
Multiscore Mfg. Co.,
1143 N.W. 51st St.,
Seattle, WA 98107
Tel. 206/784-7640
FAX 206/784-7641
Model 21 System [] 20-40
(Rip/Crosscut)
Model MR-21 Rip Saw 20-60 []
Gang Rip
Panhans Machine Co. Inc.,
P.O. Box 3052,
Point Pleasant, NJ 08742
Tel. 888/667-8040
FAX 732/295-3753
6908 [] 9 hp []
Electronic Ill Plus [] 9 hp
Euro 5 [] 15 hp
Euro 12 [] 25
Euro 32 [] 30
V 12 [] 25
Paul Saws + Systems,
A Div. of Koch Ltd.,
300 Lake Ridge Dr., S.E.,
Smyrna, GA 30082
Tel. 678/444-5000
FAX 678-444-5100
K 34 Rip/Crosscut [] 20-125
K 34 M Gang Rip 5 hp/saw []
Powermatic Corp., 619 Morrison St.,
McMinnville, TN 37110
Tel. 931/473-5551 or
800/248-0144
FAX 931/473-0586
Powermatic Model [] []
S10 Panel Saw
Eric Riebling Co. Inc.,
106 Miller Place,
Mt. Vernon, NY 10550
Tel. 914/668-4800
FAX 914/668-6438
Kolle Formatic [] [] 10 []
Ritter Mfg. Inc.,
1300 - B, W. Fourth St.,
Antioch, CA
Tel. 925/757-7296
FAX 925/757-7083
R-1050 [] 5 []
SCM GROUP USA,
2475-B Satellite Blvd.,
Duluth, GA 30096
Tel. 770/813-8818
FAX 770/813-8819
Mini Max SC 2W [] 3.6 []
Mini Max SC 3W [] 4.8 []
Mini Max SC4WS [] 4.8 or 6.6 []
Mini Max S315WS [] 4.8 or 6.6 []
Mini Max Formula S35 [] 9 []
Mini Max [] 9 []
Formula S30
SCMI S1 [] 9 []
Gabbiani Elite [] 30 or 40
Gabbiani Elite/T [] 30 or 40
Gabbiani Elite AN 130 [] 30 or 40
Gabbiani A10 [] 40
SCMI [] 18 hp
Sigma 90 DR
SCMI [] 18 hp
Sigma 90 PR
SCMI [] 25 hp
Sigma 115
EvolutionDR
Multiscore Mfg. Co.,
1143 N.W. 51st St.,
Seattle, WA 98107
Tel. 206/784-7640
FAX 206/784-7641
Model 21 System [] 1000 panels
(Rip/Crosscut)
Model MR-21 Rip Saw 2500 panels
Gang Rip
Panhans Machine Co. Inc.,
P.O. Box 3052,
Point Pleasant, NJ 08742
Tel. 888/667-8040
FAX 732/295-3753
6908
Electronic Ill Plus [] NC
Euro 5 PC
[]
Euro 12 [] PC
Euro 32 [] PC
V 12 [] PC
Paul Saws + Systems,
A Div. of Koch Ltd.,
300 Lake Ridge Dr., S.E.,
Smyrna, GA 30082
Tel. 678/444-5000
FAX 678-444-5100
K 34 Rip/Crosscut [] [] 6000 panels
K 34 M Gang Rip [] [] CNC 6000 panels
Powermatic Corp., 619 Morrison St.,
McMinnville, TN 37110
Tel. 931/473-5551 or
800/248-0144
FAX 931/473-0586
Powermatic Model
S10 Panel Saw
Eric Riebling Co. Inc.,
106 Miller Place,
Mt. Vernon, NY 10550
Tel. 914/668-4800
FAX 914/668-6438
Kolle Formatic [] [] []
Ritter Mfg. Inc.,
1300 - B, W. Fourth St.,
Antioch, CA
Tel. 925/757-7296
FAX 925/757-7083
R-1050
SCM GROUP USA,
2475-B Satellite Blvd.,
Duluth, GA 30096
Tel. 770/813-8818
FAX 770/813-8819
Mini Max SC 2W
Mini Max SC 3W
Mini Max SC4WS
Mini Max S315WS
Mini Max Formula S35
Mini Max
Formula S30
SCMI S1
Gabbiani Elite [] CNC
Gabbiani Elite/T [] CNC
Gabbiani Elite AN 130 [] CNC
Gabbiani A10 [] CNC
SCMI [] CNC
Sigma 90 DR
SCMI [] CNC
Sigma 90 PR
SCMI [] CNC
Sigma 115
EvolutionDR
Multiscore Mfg. Co.,
1143 N.W. 51st St.,
Seattle, WA 98107
Tel. 206/784-7640
FAX 206/784-7641
Model 21 System 5' x 10' Opt.
(Rip/Crosscut)
Model MR-21 Rip Saw 62" width
Gang Rip
Panhans Machine Co. Inc.,
P.O. Box 3052,
Point Pleasant, NJ 08742
Tel. 888/667-8040
FAX 732/295-3753
6908 5' x 10' []
Electronic Ill Plus 5' x 10' []
Euro 5 10'6" x 102' []
137" x 137" []
Euro 12 3 models, up to []
17' cutting length
Euro 32 Up to 20' cut length []
V 12 Up to 17' cut length []
Paul Saws + Systems,
A Div. of Koch Ltd.,
300 Lake Ridge Dr., S.E.,
Smyrna, GA 30082
Tel. 678/444-5000
FAX 678-444-5100
K 34 Rip/Crosscut Up to 8' x 10'
K 34 M Gang Rip Up to 8' x 10' Opt.
Powermatic Corp., 619 Morrison St.,
McMinnville, TN 37110
Tel. 931/473-5551 or
800/248-0144
FAX 931/473-0586
Powermatic Model 62"
S10 Panel Saw
Eric Riebling Co. Inc.,
106 Miller Place,
Mt. Vernon, NY 10550
Tel. 914/668-4800
FAX 914/668-6438
Kolle Formatic 5' x 10' []
Ritter Mfg. Inc.,
1300 - B, W. Fourth St.,
Antioch, CA
Tel. 925/757-7296
FAX 925/757-7083
R-1050 5' x 10' []
SCM GROUP USA,
2475-B Satellite Blvd.,
Duluth, GA 30096
Tel. 770/813-8818
FAX 770/813-8819
Mini Max SC 2W 5' x 5' []
Mini Max SC 3W 4' x 8' []
Mini Max SC4WS 5' x 9' []
Mini Max S315WS 5' x 10' []
Mini Max Formula S35 5' x 10' []
Mini Max 5' x 10' []
Formula S30
SCMI S1 5' x 10' []
Gabbiani Elite 149" or 177" []
max cut length
Gabbiani Elite/T Same as above []
Gabbiani Elite AN 130 Same as above []
Gabbiani A10 Same as above []
SCMI 149" or 177" []
Sigma 90 DR Max cut length
SCMI 149" or 177" []
Sigma 90 PR Max cut length
SCMI 149" or 177" []
Sigma 115 Max cut length
EvolutionDR
Pneumatic
Multiscore Mfg. Co.,
1143 N.W. 51st St.,
Seattle, WA 98107
Tel. 206/784-7640
FAX 206/784-7641
Model 21 System
(Rip/Crosscut)
Model MR-21 Rip Saw
Gang Rip
Panhans Machine Co. Inc.,
P.O. Box 3052,
Point Pleasant, NJ 08742
Tel. 888/667-8040
FAX 732/295-3753
6908 []
Electronic Ill Plus Electronic
Euro 5
Euro 12
Euro 32
V 12
Paul Saws + Systems,
A Div. of Koch Ltd.,
300 Lake Ridge Dr., S.E.,
Smyrna, GA 30082
Tel. 678/444-5000
FAX 678-444-5100
K 34 Rip/Crosscut
K 34 M Gang Rip
Powermatic Corp., 619 Morrison St.,
McMinnville, TN 37110
Tel. 931/473-5551 or
800/248-0144
FAX 931/473-0586
Powermatic Model []
S10 Panel Saw
Eric Riebling Co. Inc.,
106 Miller Place,
Mt. Vernon, NY 10550
Tel. 914/668-4800
FAX 914/668-6438
Kolle Formatic
Ritter Mfg. Inc.,
1300 - B, W. Fourth St.,
Antioch, CA
Tel. 925/757-7296
FAX 925/757-7083
R-1050 []
SCM GROUP USA,
2475-B Satellite Blvd.,
Duluth, GA 30096
Tel. 770/813-8818
FAX 770/813-8819
Mini Max SC 2W []
Mini Max SC 3W []
Mini Max SC4WS []
Mini Max S315WS []
Mini Max Formula S35 []
Mini Max []
Formula S30
SCMI S1 []
Gabbiani Elite
Gabbiani Elite/T
Gabbiani Elite AN 130
Gabbiani A10
SCMI
Sigma 90 DR
SCMI
Sigma 90 PR
SCMI
Sigma 115
EvolutionDR
Multiscore Mfg. Co.,
1143 N.W. 51st St.,
Seattle, WA 98107
Tel. 206/784-7640
FAX 206/784-7641
Model 21 System Roller 3
(Rip/Crosscut)
Model MR-21 Rip Saw Roller 1
Gang Rip
Panhans Machine Co. Inc.,
P.O. Box 3052,
Point Pleasant, NJ 08742
Tel. 888/667-8040
FAX 732/295-3753
6908
Electronic Ill Plus 1
Euro 5 Pneumatic beam 1
Euro 12 Pneumatic beam 1
Euro 32 Pneumatic beam 1
V 12 Pneumatic 1
Paul Saws + Systems,
A Div. of Koch Ltd.,
300 Lake Ridge Dr., S.E.,
Smyrna, GA 30082
Tel. 678/444-5000
FAX 678-444-5100
K 34 Rip/Crosscut
K 34 M Gang Rip
Powermatic Corp., 619 Morrison St.,
McMinnville, TN 37110
Tel. 931/473-5551 or
800/248-0144
FAX 931/473-0586
Powermatic Model 1
S10 Panel Saw
Eric Riebling Co. Inc.,
106 Miller Place,
Mt. Vernon, NY 10550
Tel. 914/668-4800
FAX 914/668-6438
Kolle Formatic Pneumatic 1
Ritter Mfg. Inc.,
1300 - B, W. Fourth St.,
Antioch, CA
Tel. 925/757-7296
FAX 925/757-7083
R-1050 Spring arm 1
SCM GROUP USA,
2475-B Satellite Blvd.,
Duluth, GA 30096
Tel. 770/813-8818
FAX 770/813-8819
Mini Max SC 2W Eccentric clamp 1
Mini Max SC 3W Eccentric clamp 1
Mini Max SC4WS Eccentric clamp 1
Mini Max S315WS Eccentric clamp 1
Mini Max Formula S35 Eccentric clamp 1
Mini Max Eccentric clamp 1
Formula S30
SCMI S1 Eccentric clamp 1
Gabbiani Elite DBL Pressure beam 1
Gabbiani Elite/T DBL Pressure beam 1
Gabbiani Elite AN 130 DBL Pressure beam 1
Gabbiani A10 DBL Pressure beam 1
SCMI Slotted Pressure beam 1
Sigma 90 DR
SCMI Slotted pressure beam 1
Sigma 90 PR
SCMI Slotted pressure beam 1
Sigma 115
EvolutionDR
Multiscore Mfg. Co.,
1143 N.W. 51st St.,
Seattle, WA 98107
Tel. 206/784-7640
FAX 206/784-7641
Model 21 System Sawing and/or grooving
(Rip/Crosscut)
Model MR-21 Rip Saw Sawing and/or grooving
Gang Rip
Panhans Machine Co. Inc.,
P.O. Box 3052,
Point Pleasant, NJ 08742
Tel. 888/667-8040
FAX 732/295-3753
6908 Digital on tilt, scoring, rip
fence, cross
cut stop; "Super Gherfix" miter
system;
"Quick-Step" Shimless scoring.
Electronic Ill Plus Programming display for rip fence,
blade
height and tilt; Motorized scoring
with
digital display; "Quick-step"
shimless
scoring; Digital cross-cut; "Super
Gherix"
miter system.
Euro 5 Space saver design; fully
automated.
Euro 12 Hi-speed fully automated.
Euro 32 Hi-speed fully automatic; highest
capacity.
V 12 Automatic V grooving normal panel
sizing.
Paul Saws + Systems,
A Div. of Koch Ltd.,
300 Lake Ridge Dr., S.E.,
Smyrna, GA 30082
Tel. 678/444-5000
FAX 678-444-5100
K 34 Rip/Crosscut
K 34 M Gang Rip
Powermatic Corp., 619 Morrison
St.,
McMinnville, TN 37110
Tel. 931/473-5551 or
800/248-0144
FAX 931/473-0586
Powermatic Model Worm Drive Motor, Optional "Short
Panel
S10 Panel Saw Fence."
Eric Riebling Co. Inc.,
106 Miller Place,
Mt. Vernon, NY 10550
Tel. 914/668-4800
FAX 914/668-6438
Kolle Formatic Angular tilting, electric tilt and
height
Ritter Mfg. Inc.,
1300 - B, W. Fourth St.,
Antioch, CA
Tel. 925/757-7296
FAX 925/757-7083
R-1050
SCM GROUP USA,
2475-B Satellite Blvd.,
Duluth, GA 30096
Tel. 770/813-8818
FAX 770/813-8819
Mini Max SC 2W 50" crosscut capacity, 48" rip
capac.,
mechanical blade group movement,
cast
iron rip fence.
Mini Max SC 3W 98" crosscut capacity, overarm saw
guard,
outfeed extension table
Mini Max SC4WS 109" crosscut capacity, overarm
guard
mitre guage w/fence, rolling
indicator
for tilt, articulating support arm
Mini Max S315WS 128" crosscut capacity, 50" rip
cap.,
separate motor scoring, mitre
gauge
w/fence, overarm guard, dial
indicator for
tilt, cast iron rip support
w/microadjustment.
Mini Max Formula S35 126" crosscut capacity w/sliding
table
gantry mouted overarm saw guard,
cast iron rip fence support, rip
fence
capacity 50", separate motor
scoring.
Mini Max 126" crosscut capacity w/sliding
table
Formula S30 gantry mouted overarm saw guard,
cast iron rip fence support, rip
fence
capacity 50", separate motor
scoring.
SCMI S1 126" rip capacity w/sliding table
Gabbiani Elite AC brushless motors, quick blade
change,
auto side alighment, 400 ft/min
carriage
speed, 230 ft/min pusher speed, 5"
cutting
height. H.P. PC, 3.2 gig hard
drive, 32 meg
RAM, simple cut-on-line
optimization
Gabbiani Elite/T Rear or side load platform saw,
same specs
as Elite, avail w/thin loading.
H.P. PC,
3.2 gig hard drive, 32 meg RAM,
simple
cut-on-line optimization.
Gabbiani Elite AN 130 Angular system. H.P. PC, 3.2 gig
hard
drive, 32 megs RAM, simple
cut-on-line
optimization.
Gabbiani A10 Angular system up to 6" cutting
height.
H.P. PC, 3.2 gig hard drive, 32
megs RAM,
simple cut-on-line optimization.
SCMI 90mm blade projection, Rack &
pinion
Sigma 90 DR carriage, Magnetic strip for
pusher
positioning, auto side alignment
H.P. PC,
3.2 gig hard drive, 32 megs RAM,
simple
cut-on-line optimization.
SCMI Rear load platform saw, same specs.
as the
Sigma 90 PR 90 DR. H.P. PC, 3.2 gig hard
drive, 32 megs
RAM, simple cut-on-line
optimization.
SCMI Auto side alignment Rack & pinion
saw
Sigma 115 carriage, Magnetic strip for
pusher
EvolutionDR positioning, quick blade change,
325 ft/min
pusher & carriage. H.P. PC, 3.2
gig hard
drive, 32 megs RAM, simple
cut-on-line
optim.
SCMI [] 25 hp
Sigma 115 PR
SCMI [] 12 hp
Sigma 65A
SCMI [] 12 hp
Sigma 65C
SCMI [] 18 hp
Sigma 9OC
SCMI S1150 [] 6.60 []
SCMI S1300 [] 9 hp []
SCMI S1350 [] 9 hp []
SCMI S1400E [] 9 hp []
S1450E [] 9 hp []
Gabbiani [] 30 hp
Galaxy 140
SCMI SI300 [] 9 hp []
SCMI Sl350 [] 9 hp []
SCMI S1400E [] 9 hp []
SCMI S1450E [] 9 hp []
Safety Speed Cut Mfg. Co. Inc.,
13460 N. Hwy., 65,
Anoka, MN 55304
Tel. 612/755-1600
FAX 612/755-6080
Model H4 [] 2-1/2 hp []
Model H5 [] 2-1/2 hp []
Model H6 [] 2-1/2 hp []
Model 6400 [] 3 hp []
Medol 6800 [] 3 hp []
Model 7400 [] 2 or 3 hp []
Model C-4 [] 2.5 hp []
Model SP-5 [] 2.5 hp []
Panel saw/panel router
Saw Trax Mfg. Co. Inc.,
3790 Hwy. 92, Ste. 220,
Acworth, GA 30102
Tel. 770/974-0021
FAX 770/975-1618
[] []
Schelling America Inc.,
P.0. Box 80367,
Raleigh, NC 27623
Tel. 919/544-0430
FAX 919/544-0920
FL330 Auto [] 32
FL330 Manual [] 32 []
FL430 Auto [] 32
FL430 Manual [] 32 []
FMH330 Auto [] 20
PMH33O Manual [] 20 []
FMH43O Auto [] 20
FMH430 Manual [] 20 []
Schwabedissen
P.O. Box 2753, D-32046
Herford, Germany
Tel. +49/ 0 5221 3981
FAX +49 0 5221 3985
S50 []
S-1001 []
700 Series [] per cust, spec
SCMI [] CNC
Sigma 115 PR
SCMI [] CNC
Sigma 65A
SCMI [] CNC
Sigma 65C
SCMI [] CNC
Sigma 9OC
SCMI S1150
SCMI S1300
SCMI S1350
SCMI S1400E
S1450E
Gabbiani [] CNC
Galaxy 140
SCMI SI300
SCMI Sl350
SCMI S1400E
SCMI S1450E
Safety Speed Cut Mfg. Co. Inc.,
13460 N. Hwy., 65,
Anoka, MN 55304
Tel. 612/755-1600
FAX 612/755-6080
Model H4
Model H5
Model H6
Model 6400
Medol 6800
Model 7400
Model C-4
Model SP-5
Panel saw/panel router
Saw Trax Mfg. Co. Inc.,
3790 Hwy. 92, Ste. 220,
Acworth, GA 30102
Tel. 770/974-0021
FAX 770/975-1618
Schelling America Inc.,
P.0. Box 80367,
Raleigh, NC 27623
Tel. 919/544-0430
FAX 919/544-0920
FL330 Auto [] CNC
FL330 Manual CNC
FL430 Auto [] CNC
FL430 Manual CNC
FMH330 Auto [] CNC
PMH33O Manual CNC
FMH43O Auto [] CNC
FMH430 Manual CNC
Schwabedissen
P.O. Box 2753, D-32046
Herford, Germany
Tel. +49/ 0 5221 3981
FAX +49 0 5221 3985
S50 [] [] CNC 800 sheets 3/4"
S-1001 [] CNC 1800 sheets 3/4"
700 Series [] CNC 3400 sheets 3/4"
SCMI 149" or 177" []
Sigma 115 PR Max cut length
SCMI 126" or 177" []
Sigma 65A Max cut length
SCMI 126" or 177" []
Sigma 65C Max cut length
SCMI 126" or 177" []
Sigma 9OC Max cut length
SCMI S1150 5'x 5' [] []
SCMI S1300 5' x 10' [] []
SCMI S1350 5' x 10' [] []
SCMI S1400E 5' x 10' [] []
S1450E 5' x 10' [] []
Gabbiani 149" or 177" []
Galaxy 140 Max cut length
SCMI SI300 5 x 10 [] []
SCMI Sl350 5 x 10 [] []
SCMI S1400E 5 x 10 []
SCMI S1450E 5 x 10 []
Safety Speed Cut Mfg. Co. Inc.,
13460 N. Hwy., 65,
Anoka, MN 55304
Tel. 612/755-1600
FAX 612/755-6080
Model H4 W: 50" L: Unlim. []
1.75" thick
Model H5 W: 64" L: Unlim. []
1.75" thick
Model H6 W: 76" L: Unlim. []
1.75" thick
Model 6400 W: 64" L: Unlim. []
1.75" thick
Medol 6800 W: 76" L: Unlim. []
1.75" thick
Model 7400 W: 64" L: Unlim. [] []
2.25" thick
Model C-4 W: 50" L: Unlim. []
1.75" thick
Model SP-5 W: 63" /w36" []
Panel saw/panel router L:Unlim.
1.75" thick
Saw Trax Mfg. Co. Inc.,
3790 Hwy. 92, Ste. 220,
Acworth, GA 30102
Tel. 770/974-0021
FAX 770/975-1618
Schelling America Inc.,
P.0. Box 80367,
Raleigh, NC 27623
Tel. 919/544-0430
FAX 919/544-0920
FL330 Auto 10' [] []
FL330 Manual 10' [] []
FL430 Auto 12' [] []
FL430 Manual 12' [] []
FMH330 Auto 10' [] []
PMH33O Manual 10' [] []
FMH43O Auto 12' [] []
FMH430 Manual 12' [] []
Schwabedissen
P.O. Box 2753, D-32046
Herford, Germany
Tel. +49/ 0 5221 3981
FAX +49 0 5221 3985
S50 900 sq. ft. []
S-1001 1800 sq. ft. []
700 Series 2900 sq. ft. []
SCMI Slotted pressure 1
Sigma 115 PR beam
SCMI Pressure beam 1
Sigma 65A
SCMI Slotted pressure 1
Sigma 65C beam
SCMI Slotted pressure 1
Sigma 9OC beam
SCMI S1150 Eccentric Clamp 1
SCMI S1300 Eccentric Clamp 1
SCMI S1350 Eccentric Clamp 1
SCMI S1400E Eccentric Clamp 1
S1450E Eccentric Clamp 1
Gabbiani Slotted pressure 1
Galaxy 140 beam
SCMI SI300 1
SCMI Sl350 1
SCMI S1400E 1
SCMI S1450E 1
Safety Speed Cut Mfg. Co. Inc.,
13460 N. Hwy., 65,
Anoka, MN 55304
Tel. 612/755-1600
FAX 612/755-6080
Model H4 Spring arm 1
Model H5 Spring arm 1
Model H6 Spring arm 1
Model 6400 Spring arm 1
Medol 6800 Spring arm 1
Model 7400 Spring arm 1
Model C-4 Spring arm 1
Model SP-5 Spring arm 1
Panel saw/panel router
Saw Trax Mfg. Co. Inc.,
3790 Hwy. 92, Ste. 220,
Acworth, GA 30102
Tel. 770/974-0021
FAX 770/975-1618
1
Schelling America Inc.,
P.0. Box 80367,
Raleigh, NC 27623
Tel. 919/544-0430
FAX 919/544-0920
FL330 Auto Pressure Beam 1
FL330 Manual Pressure Beam 1
FL430 Auto Pressure Beam 1
FL430 Manual Pressure Beam 1
FMH330 Auto Pressure Beam 1
PMH33O Manual Pressure Beam 1
FMH43O Auto Pressure Beam 1
FMH430 Manual Pressure Beam
Schwabedissen
P.O. Box 2753, D-32046
Herford, Germany
Tel. +49/ 0 5221 3981
FAX +49 0 5221 3985
S50 Same as above 1
S-1001 Same as above 1
700 Series Same as above 2
SCMI Rear load platform saw, same specs as
Sigma 115 PR 115 DR, H.P. PC, 3.2 gig hard drive, 32
megs RAM, simple cut-on-line optim.
SCMI 65mm blade projection, 32 port for
Sigma 65A downloading software, Master
controller 008.
SCMI Semi auto. side alignment, 5 clamps
Sigma 65C pc controller
SCMI Quick blade change, start/stop cycle
Sigma 9OC pedal, grooving capacity, air floata
tion tables, 195 ft/min carriage
speed. H.P. PC, 3.2 gig hard drive,32
megs RAM, simple cut-on-line option.
SCMI S1150 12" Industrial Short Stroke Saw
SCMI S1300 12" 1hp scoring motor, 126" cross
cut w/scoring, external scoring,
over-arm gantry guard, ergonomic
controls.
SCMI S1350 14" 1hp scoring motor, 126" cross
cut w/scoring, external scoring,
over-arm gantry guard, ergonomic
controls.
SCMI S1400E 18" as above with powered tilt and
raise of blade, Quick release and
square of cross cut fence ex version
with powered rip fence and digital
readout.
S1450E Electric blade adjustment, 3 Axes
programmer.
Gabbiani Rear or side load, H.P. PC, 32 megs
Galaxy 140 RAM, 3.2 gig hard drive, simple
cut-on-line optimization, THK guides.
SCMI SI300 1-hp scoring motor, 126" sliding
table rip capacity, ext. scoring adj.
SCMI Sl350 1-hp scoring motor, 126" sliding
table rip capacity, ext. scoring adj.
SCMI S1400E Electric tilt, elec blade adj, power
rip fence w/readout.
SCMI S1450E Electric tilt elec blade adj., 3 axes
programmer.
Safety Speed Cut Mfg. Co. Inc.,
13460 N. Hwy., 65,
Anoka, MN 55304
Tel. 612/755-1600
FAX 612/755-6080
Model H4 Roller material carriage.
Model H5 Roller material carraige.
Model H6 Roller material carraige.
Model 6400 Chip free cut without scoring
Medol 6800 Chip free cut without scoring
Model 7400 Carbide knife scoring
Model C-4 Roller material carriage.
Model SP-5 Roller material carriage.
Panel saw/panel router
Saw Trax Mfg. Co. Inc.,
3790 Hwy. 92, Ste. 220,
Acworth, GA 30102
Tel. 770/974-0021
FAX 770/975-1618
Expandable
Schelling America Inc.,
P.0. Box 80367,
Raleigh, NC 27623
Tel. 919/544-0430
FAX 919/544-0920
FL330 Auto 5.75" blade exposure, rack & pinion
FL330 Manual driven feeder & saw carriage, saw
FL430 Auto carriage cutting speed up tp 393 fpm,
FL430 Manual feeder positioning speed up to 275
fpm, hardened steel guideways w/
lifetime guarantee, PC.
FMH330 Auto 3.75" blade exposure. The other
PMH33O Manual features are the same as the FL
FMH43O Auto machines.
FMH430 Manual
Schwabedissen
P.O. Box 2753, D-32046
Herford, Germany
Tel. +49/ 0 5221 3981
FAX +49 0 5221 3985
S50 Gantry Saw withCompact space
S-1001 Extra heavy duty
700 Series High capacity
Vertical
U.S. Saws Co.,
505 E. Pine St.,
Compton, CA 90222
Tel. 310/763-2551
FAX 310/763-5142
Model 91HD [] 10, 15, 20 []
Model 91HD-XCX [] 15 (@) []
Model 91XHD [] 15, 20, 25 []
Model 91HD [] [] 10, 15, 20 []
10 x 5, 14 x 5
Unique Machine & Tool Co.,
4232 E. Magnolia St.,
Phoenix, AZ 85034
Tel. 602/470-1911
FAX 602/470-1916
Model #41 [] 3-10 or per []
cust. spec.
Model #42 [] 3-10 or per
cust. spec.
Wadkin USA,
7910 Industrial Village Road,
Greensboro, NC 27409
Tel. 910/665-1907
FAX 910/665-0576
CP32 [] 9 hp []
CP12 [] 9 hp []
Woodworkers Equipment &
Machinery Co.,
P.O. Box 148,
Olin, NC 28660
Tel. 704/876-4952
FAX 704/876-6408
Wemco [] Up to 10 hp
Wemco [] Up to 20 hp
U.S. Saws Co.,
505 E. Pine St.,
Crompton, CA 90222
Tel. 310/763-2551
FAX 310/763-5142
Model 91HD [] [] 1600 full width cuts
Model 91HD-XCX [] 4000 full width cuts
Model 91XHD [] [] [] 1200 full width cuts
Model 91HD [] 50,000 square feet
10 x 5, 14 x 5
Unique Machine & Tool Co.,
4232 E. Magnolia St.,
Phoenix, AZ 85034
Tel. 602/470-1911
FAX 602/470-1916
Model #41 Depends on mat.
Model #42 [] Depends on mat.
Wadkin USA,
7910 Industrial Village Road,
Greensboro, NC 27409
Tel. 910/665-1907
FAX 910/665-0576
CP32
CP12
Woodworkers Equipment &
Machinery Co.,
P.O. Box 148,
Olin, NC 28660
Tel. 704/876-4952
FAX 704/876-6408
Wemco [] [] 10,000 sq. ft.
Wemco [] [] NC 25,000 sq. ft.
U.S. Saws Co.,
505 E. Pine St.,
Crompton, CA 90222
Tel. 310/763-2551
FAX 310/763-5142
Model 91HD To 5 x 16 []
Model 91HD-XCX 60" wide []
Model 91XHD To 5 x 16 []
Model 91HD To 5 x 10 []
10 x 5, 14 x 5 5 x 14
Unique Machine & Tool Co.,
4232 E. Magnolia St.,
Phoenix, AZ 85034
Tel. 602/470-1911
FAX 602/470-1916
Model #41 50" to 144" cut
Model #42 50" to 144" cut
Wadkin USA,
7910 Industrial Village Road,
Greensboro, NC 27409
Tel. 910/665-1907
FAX 910/665-0576
CP32 10' x 4' [] []
CP12 8' x 4' [] []
Woodworkers Equipment &
Machinery Co.,
P.O. Box 148,
Olin, NC 28660
Tel. 704/876-4952
FAX 704/876-6408
Wemco [] []
Wemco [] []
U.S. Saws Co.,
505 E. Pine St.,
Crompton, CA 90222
Tel. 310/763-2551
FAX 310/763-5142
Model 91HD Air/Auto, pressure
beam
Model 91HD-XCX Air/Auto, pressure
beam
Model 91XHD Air/Auto, pressure
beam
Model 91HD Air/Auto, pressure
10 x 5, 14 x 5 beam
Unique Machine & Tool Co.,
4232 E. Magnolia St.,
Phoenix, AZ 85034
Tel. 602/470-1911
FAX 602/470-1916
Model #41 Option 1
Model #42 Option 1
Wadkin USA,
7910 Industrial Village Road,
Greensboro, NC 27409
Tel. 910/665-1907
FAX 910/665-0576
CP32 1-2
CP12 1
Woodworkers Equipment &
Machinery Co.,
P.O. Box 148,
Olin, NC 28660
Tel. 704/876-4952
FAX 704/876-6408
Wemco Pneumatic 1
Wemco Pneumatic 1
U.S. Saws Co.,
505 E. Pine St.,
Crompton, CA 90222
Tel. 310/763-2551
FAX 310/763-5142
Model 91HD 4" depth of cut. Low Maintenance.
Very accurate.
Model 91HD-XCX Cross-cuts in both directions. Very
fast. 4" depth of cut.
Model 91XHD To 6" depth of cut. PC communica-
tions. Auto-Cut, touch screen
Model 91HD 2 pass sytem.
10 x 5, 14 x 5
Unique Machine & Tool Co.,
4232 E. Magnolia St.,
Phoenix, AZ 85034
Tel. 602/470-1911
FAX 602/470-1916
Model #41 Horizontal
Model #42 Horizontal auto. power feed
Wadkin USA,
7910 Industrial Village Road,
Greensboro, NC 27409
Tel. 910/665-1907
FAX 910/665-0576
CP32
CP12 Fully supported outer table.
Woodworkers Equipment &
Machinery Co.,
P.O. Box 148,
Olin, NC 28660
Tel. 704/876-4952
FAX 704/876-6408
Wemco
Wemco Rip & cross cut
PANEL SIZING, BORING & EDGEBANDING
EDGEBANDER REFERENCE GUIDE
Product
Name/No. Manual Semi-auto. Automatic
Adwood Corp.,
P.O. Box 1195,
High Point, NC 27261
Tel. 336/884-1846
FAX 336/841-6493
Adwood EP 2S []
Adwood EP 3T []
Adwood EP 7 []
Adwood EP 8 []
Adwood EP 9 []
Adwood EP 11 []
Adwood []
300-Series
Adwood []
400-Series
Adwood EP-C []
Adwood []
200 SF-Series
Altendorf America, Div. of
Stiles Machinery Inc.,
P.O. Box 316, 3965 44th St. S.E.,
Grand Rapids, MI 49512
Tel. 616/698-8456
Brandt KTD-72 [] []
Brandt F-13 [] []
Trimmer
Brandt KD-50 []
Optimat
Brandt KD-60 []
Optimat
Brandt KD-70 []
Optimat
Brandt KD-97CF []
Optimist
Brandt KD-90 []
Series
Anderson Manufacturing Technologies,
80 Harwood Dr.,
St. Albert, Alberta, Canada T8N 6G3
Tel. 780/459-6320
147005 []
Atlantic Machinery Corp.,
36 South End Plaza,
New Milford, CT 06776
Tel. 860/354-7200
FAX 860/354-0315
VITAP BC 91 []
Quartz []
Biesse Group America,
P.O. Box 19849,
Charlotte, NC 28219-9849
Tel. 704/357-3131
FAX: 704/357-3130
Polymac []
Single 89
Ergho 2 [] []
Polymac []
Ergho 3
Polymac []
Ergho 5 []
Ergho 7
Product
Name/No. Single sided Double sided
Adwood Corp.,
P.O. Box 1195,
High Point, NC 27261
Tel. 336/884-1846
FAX 336/841-6493
Adwood EP 2S []
Adwood EP 3T []
Adwood EP 7 []
Adwood EP 8 []
Adwood EP 9 []
Adwood EP 11 []
Adwood []
300-Series
Adwood
400-Series
Adwood EP-C []
Adwood []
200 SF-Series
Altendorf America, Div. of
Stiles Machinery Inc.,
P.O. Box 316, 3965 44th St. S.E.,
Grand Rapids, MI 49512
Tel. 616/698-8456
Brandt KTD-72
Brandt F-13
Trimmer
Brandt KD-50 []
Optimat
Brandt KD-60 []
Optimat
Brandt KD-70 []
Optimat
Brandt KD-97CF []
Optimist
Brandt KD-90 []
Series
Anderson Manufacturing Technologies,
80 Harwood Dr.,
St. Albert, Alberta, Canada T8N 6G3
Tel. 780/459-6320
147005 []
Atlantic Machinery Corp.,
36 South End Plaza,
New Milford, CT 06776
Tel. 860/354-7200
FAX 860/354-0315
VITAP BC 91 []
Quartz []
Biesse Group America,
P.O. Box 19849,
Charlotte, NC 28219-9849
Tel. 704/357-3131
FAX: 704/357-3130
Polymac []
Single 89
Ergho 2
Polymac []
Ergho 3
Polymac []
Ergho 5 []
Ergho 7
Product
Name/No. Feed Speed Min. & Max.
Adwood Corp.,
P.O. Box 1195,
High Point, NC 27261
Tel. 336/884-1846
FAX 336/841-6493
Adwood EP 2S 30'
Adwood EP 3T 30'
Adwood EP 7 33'
Adwood EP 8 33'
Adwood EP 9 33'
Adwood EP 11 32'
Adwood 30' to 70'
300-Series
Adwood 30' to 80'
400-Series
Adwood EP-C Variable
Adwood 50'
200 SF-Series
Altendorf America, Div. of
Stiles Machinery Inc.,
P.O. Box 316, 3965 44th St. S.E.,
Grand Rapids, MI 49512
Tel. 616/698-8456
Brandt KTD-72 13-29 fpm
Brandt F-13
Trimmer
Brandt KD-50 30 fpm
Optimat
Brandt KD-60 36 fpm
Optimat
Brandt KD-70 36 fpm
Optimat
Brandt KD-97CF 52 fpm
Optimist
Brandt KD-90 49-82 fpm
Series
Anderson Manufacturing Technologies,
80 Harwood Dr.,
St. Albert, Alberta, Canada T8N 6G3
Tel. 780/459-6320
147005 17 fpm max
Atlantic Machinery Corp.,
36 South End Plaza,
New Milford, CT 06776
Tel. 860/354-7200
FAX 860/354-0315
VITAP BC 91 10-20 fpm
Quartz 13 fpm
Biesse Group America,
P.O. Box 19849,
Charlotte, NC 28219-9849
Tel. 704/357-3131
FAX: 704/357-3130
Polymac 13'-39'
Single 89
Ergho 2 29.5'-60.5'
Polymac same
Ergho 3
Polymac same
Ergho 5 same
Ergho 7
Product Glue System
Name/No. Hot air blower
Adwood Corp.,
P.O. Box 1195,
High Point, NC 27261
Tel. 336/884-1846
FAX 336/841-6493
Adwood EP 2S
Adwood EP 3T
Adwood EP 7
Adwood EP 8
Adwood EP 9
Adwood EP 11
Adwood
300-Series
Adwood
400-Series
Adwood EP-C
Adwood
200 SF-Series
Altendorf America, Div. of
Stiles Machinery Inc.,
P.O. Box 316, 3965 44th St. S.E.,
Grand Rapids, MI 49512
Tel. 616/698-8456
Brandt KTD-72
Brandt F-13
Trimmer
Brandt KD-50
Optimat
Brandt KD-60
Optimat
Brandt KD-70
Optimat
Brandt KD-97CF
Optimist
Brandt KD-90
Series
Anderson Manufacturing Technologies,
80 Harwood Dr.,
St. Albert, Alberta, Canada T8N 6G3
Tel. 780/459-6320
147005 []
Atlantic Machinery Corp.,
36 South End Plaza,
New Milford, CT 06776
Tel. 860/354-7200
FAX 860/354-0315
VITAP BC 91
Quartz []
Biesse Group America,
P.O. Box 19849,
Charlotte, NC 28219-9849
Tel. 704/357-3131
FAX: 704/357-3130
Polymac
Single 89
Ergho 2
Polymac
Ergho 3
Polymac
Ergho 5
Ergho 7
Product
Name/No. Hot melt glue pot Cartridge
Adwood Corp.,
P.O. Box 1195,
High Point, NC 27261
Tel. 336/884-1846
FAX 336/841-6493
Adwood EP 2S []
Adwood EP 3T []
Adwood EP 7 []
Adwood EP 8 []
Adwood EP 9 []
Adwood EP 11 []
Adwood []
300-Series
Adwood []
400-Series
Adwood EP-C []
Adwood []
200 SF-Series
Altendorf America, Div. of
Stiles Machinery Inc.,
P.O. Box 316, 3965 44th St. S.E.,
Grand Rapids, MI 49512
Tel. 616/698-8456
Brandt KTD-72 []
Brandt F-13
Trimmer
Brandt KD-50 []
Optimat
Brandt KD-60 []
Optimat
Brandt KD-70 []
Optimat
Brandt KD-97CF []
Optimist
Brandt KD-90 []
Series
Anderson Manufacturing Technologies,
80 Harwood Dr.,
St. Albert, Alberta, Canada T8N 6G3
Tel. 780/459-6320
147005 []
Atlantic Machinery Corp.,
36 South End Plaza,
New Milford, CT 06776
Tel. 860/354-7200
FAX 860/354-0315
VITAP BC 91 []
Quartz
Biesse Group America,
P.O. Box 19849,
Charlotte, NC 28219-9849
Tel. 704/357-3131
FAX: 704/357-3130
Polymac []
Single 89
Ergho 2 []
Polymac []
Ergho 3
Polymac []
Ergho 5 []
Ergho 7
Product
Name/No. PVAc cold glue
Adwood Corp.,
P.O. Box 1195,
High Point, NC 27261
Tel. 336/884-1846
FAX 336/841-6493
Adwood EP 2S
Adwood EP 3T
Adwood EP 7
Adwood EP 8
Adwood EP 9
Adwood EP 11
Adwood
300-Series
Adwood
400-Series
Adwood EP-C
Adwood
200 SF-Series
Altendorf America, Div. of
Stiles Machinery Inc.,
P.O. Box 316, 3965 44th St. S.E.,
Grand Rapids, MI 49512
Tel. 616/698-8456
Brandt KTD-72
Brandt F-13
Trimmer
Brandt KD-50
Optimat
Brandt KD-60
Optimat
Brandt KD-70
Optimat
Brandt KD-97CF
Optimist
Brandt KD-90
Series
Anderson Manufacturing Technologies,
80 Harwood Dr.,
St. Albert, Alberta, Canada T8N 6G3
Tel. 780/459-6320
147005
Atlantic Machinery Corp.,
36 South End Plaza,
New Milford, CT 06776
Tel. 860/354-7200
FAX 860/354-0315
VITAP BC 91
Quartz
Biesse Group America,
P.O. Box 19849,
Charlotte, NC 28219-9849
Tel. 704/357-3131
FAX: 704/357-3130
Polymac
Single 89
Ergho 2
Polymac
Ergho 3
Polymac
Ergho 5
Ergho 7
Product Comb, hot melt glue
Name/No. pot/PVAc
Adwood Corp.,
P.O. Box 1195,
High Point, NC 27261
Tel. 336/884-1846
FAX 336/841-6493
Adwood EP 2S
Adwood EP 3T
Adwood EP 7
Adwood EP 8
Adwood EP 9
Adwood EP 11
Adwood
300-Series
Adwood
400-Series
Adwood EP-C
Adwood
200 SF-Series
Altendorf America, Div. of
Stiles Machinery Inc.,
P.O. Box 316, 3965 44th St. S.E.,
Grand Rapids, MI 49512
Tel. 616/698-8456
Brandt KTD-72
Brandt F-13
Trimmer
Brandt KD-50
Optimat
Brandt KD-60
Optimat
Brandt KD-70
Optimat
Brandt KD-97CF
Optimist
Brandt KD-90
Series
Anderson Manufacturing Technologies,
80 Harwood Dr.,
St. Albert, Alberta, Canada T8N 6G3
Tel. 780/459-6320
147005
Atlantic Machinery Corp.,
36 South End Plaza,
New Milford, CT 06776
Tel. 860/354-7200
FAX 860/354-0315
VITAP BC 91
Quartz
Biesse Group America,
P.O. Box 19849,
Charlotte, NC 28219-9849
Tel. 704/357-3131
FAX: 704/357-3130
Polymac
Single 89
Ergho 2
Polymac
Ergho 3
Polymac
Ergho 5
Ergho 7
Product Workpiece size
Name/No. capacity Min. & Max.
Adwood Corp.,
P.O. Box 1195,
High Point, NC 27261
Tel. 336/884-1846
FAX 336/841-6493
Adwood EP 2S
Adwood EP 3T
Adwood EP 7
Adwood EP 8
Adwood EP 9
Adwood EP 11
Adwood
300-Series
Adwood
400-Series
Adwood EP-C
Adwood
200 SF-Series
Altendorf America, Div. of
Stiles Machinery Inc.,
P.O. Box 316, 3965 44th St. S.E.,
Grand Rapids, MI 49512
Tel. 616/698-8456
Brandt KTD-72
Brandt F-13
Trimmer
Brandt KD-50
Optimat
Brandt KD-60
Optimat
Brandt KD-70
Optimat
Brandt KD-97CF
Optimist
Brandt KD-90
Series
Anderson Manufacturing Technologies,
80 Harwood Dr.,
St. Albert, Alberta, Canada T8N 6G3
Tel. 780/459-6320
147005 1/2 to 2"
mat thick
Atlantic Machinery Corp.,
36 South End Plaza,
New Milford, CT 06776
Tel. 860/354-7200
FAX 860/354-0315
VITAP BC 91 0.4-5mm/
20mm radius
Quartz 0.4-1.5mm
Biesse Group America,
P.O. Box 19849,
Charlotte, NC 28219-9849
Tel. 704/357-3131
FAX: 704/357-3130
Polymac .39"-2.36"
Single 89
Ergho 2 10mm-45mm
Polymac 10mm-45mm
Ergho 3
Polymac 10mm-45mm
Ergho 5 10mm-45mm
Ergho 7
Product
Name/No. Straight line
Adwood Corp.,
P.O. Box 1195,
High Point, NC 27261
Tel. 336/884-1846
FAX 336/841-6493
Adwood EP 2S []
Adwood EP 3T []
Adwood EP 7 []
Adwood EP 8 []
Adwood EP 9 []
Adwood EP 11
Adwood []
300-Series
Adwood []
400-Series
Adwood EP-C
Adwood []
200 SF-Series
Altendorf America, Div. of
Stiles Machinery Inc.,
P.O. Box 316, 3965 44th St. S.E.,
Grand Rapids, MI 49512
Tel. 616/698-8456
Brandt KTD-72 []
Brandt F-13
Trimmer
Brandt KD-50 []
Optimat
Brandt KD-60 []
Optimat
Brandt KD-70 []
Optimat
Brandt KD-97CF []
Optimist
Brandt KD-90 []
Series
Anderson Manufacturing Technologies,
80 Harwood Dr.,
St. Albert, Alberta, Canada T8N 6G3
Tel. 780/459-6320
147005 []
Atlantic Machinery Corp.,
36 South End Plaza,
New Milford, CT 06776
Tel. 860/354-7200
FAX 860/354-0315
VITAP BC 91 []
Quartz
Biesse Group America,
P.O. Box 19849,
Charlotte, NC 28219-9849
Tel. 704/357-3131
FAX: 704/357-3130
Polymac []
Single 89
Ergho 2
Polymac []
Ergho 3
Polymac []
Ergho 5 []
Ergho 7
Product Comb, straight line &
Name/No. softforming Radius
Adwood Corp.,
P.O. Box 1195,
High Point, NC 27261
Tel. 336/884-1846
FAX 336/841-6493
Adwood EP 2S
Adwood EP 3T
Adwood EP 7
Adwood EP 8
Adwood EP 9
Adwood EP 11
Adwood
300-Series
Adwood
400-Series
Adwood EP-C [] []
Adwood []
200 SF-Series
Altendorf America, Div. of
Stiles Machinery Inc.,
P.O. Box 316, 3965 44th St. S.E.,
Grand Rapids, MI 49512
Tel. 616/698-8456
Brandt KTD-72
Brandt F-13
Trimmer
Brandt KD-50
Optimat
Brandt KD-60
Optimat
Brandt KD-70 []
Optimat
Brandt KD-97CF []
Optimist
Brandt KD-90 []
Series
Anderson Manufacturing Technologies,
80 Harwood Dr.,
St. Albert, Alberta, Canada T8N 6G3
Tel. 780/459-6320
147005 [] []
Atlantic Machinery Corp.,
36 South End Plaza,
New Milford, CT 06776
Tel. 860/354-7200
FAX 860/354-0315
VITAP BC 91 []
Quartz []
Biesse Group America,
P.O. Box 19849,
Charlotte, NC 28219-9849
Tel. 704/357-3131
FAX: 704/357-3130
Polymac [] []
Single 89
Ergho 2
Polymac
Ergho 3
Polymac
Ergho 5
Ergho 7
Product
Name/No. Contour Special Features
Adwood Corp.,
P.O. Box 1195,
High Point, NC 27261
Tel. 336/884-1846
FAX 336/841-6493
Adwood EP 2S Automatic roll cutter
Adwood EP 3T Automatic surface trim
with cutters
Adwood EP 7
Adwood EP 8 Buffing
Adwood EP 9 Scrape buffing
Adwood EP 11 Corner rounding, scrape
buffing
Adwood 7 frame lengths,
300-Series 12 different stations
Adwood 10 frame lengths,
400-Series 15 different stations
Adwood EP-C [] Roll cutter/ auto feed
Adwood Profile bander, surface
200 SF-Series end trim
Altendorf America, Div. of
Stiles Machinery Inc.,
P.O. Box 316, 3965 44th St. S.E.,
Grand Rapids, MI 49512
Tel. 616/698-8456
Brandt KTD-72 [] Contour edgebander
Brandt F-13 [] Contour trimmer
Trimmer
Brandt KD-50 Buffing
Optimat
Brandt KD-60 line control
Optimat
Brandt KD-70 Pre-trimming,
Optimat corner round
Brandt KD-97CF Programmable 3/4" wood,
Optimist corner round
Brandt KD-90 Programmable
Series Variable speed
Anderson Manufacturing Technologies,
80 Harwood Dr.,
St. Albert, Alberta, Canada T8N 6G3
Tel. 780/459-6320
147005 [] Digital tamp control/
edgemolding capable
Atlantic Machinery Corp.,
36 South End Plaza,
New Milford, CT 06776
Tel. 860/354-7200
FAX 860/354-0315
VITAP BC 91 Tilting table to
45 [degrees]
Quartz Top, bottom & end trim
Biesse Group America,
P.O. Box 19849,
Charlotte, NC 28219-9849
Tel. 704/357-3131
FAX: 704/357-3130
Polymac End trimming
Single 89
Ergho 2
Polymac
Ergho 3
Polymac
Ergho 5 4 mtr corner round
Ergho 7
Product Options
Name/No. Multiple feeding stations
Adwood Corp.,
P.O. Box 1195,
High Point, NC 27261
Tel. 336/884-1846
FAX 336/841-6493
Adwood EP 2S
Adwood EP 3T
Adwood EP 7
Adwood EP 8
Adwood EP 9
Adwood EP 11
Adwood []
300-Series
Adwood []
400-Series
Adwood EP-C
Adwood
200 SF-Series
Altendorf America, Div. of
Stiles Machinery Inc.,
P.O. Box 316, 3965 44th St. S.E.,
Grand Rapids, MI 49512
Tel. 616/698-8456
Brandt KTD-72
Brandt F-13
Trimmer
Brandt KD-50
Optimat
Brandt KD-60
Optimat
Brandt KD-70
Optimat
Brandt KD-97CF
Optimist
Brandt KD-90 []
Series
Anderson Manufacturing Technologies,
80 Harwood Dr.,
St. Albert, Alberta, Canada T8N 6G3
Tel. 780/459-6320
147005
Atlantic Machinery Corp.,
36 South End Plaza,
New Milford, CT 06776
Tel. 860/354-7200
FAX 860/354-0315
VITAP BC 91
Quartz
Biesse Group America,
P.O. Box 19849,
Charlotte, NC 28219-9849
Tel. 704/357-3131
FAX: 704/357-3130
Polymac []
Single 89
Ergho 2
Polymac
Ergho 3
Polymac
Ergho 5
Ergho 7
Product
Name/No. Sanding Grooving Buffing
Adwood Corp.,
P.O. Box 1195,
High Point, NC 27261
Tel. 336/884-1846
FAX 336/841-6493
Adwood EP 2S
Adwood EP 3T
Adwood EP 7
Adwood EP 8
Adwood EP 9 []
Adwood EP 11
Adwood [] [] []
300-Series
Adwood [] [] []
400-Series
Adwood EP-C
Adwood []
200 SF-Series
Altendorf America, Div. of
Stiles Machinery Inc.,
P.O. Box 316, 3965 44th St. S.E.,
Grand Rapids, MI 49512
Tel. 616/698-8456
Brandt KTD-72
Brandt F-13
Trimmer
Brandt KD-50 []
Optimat
Brandt KD-60 []
Optimat
Brandt KD-70 []
Optimat
Brandt KD-97CF []
Optimist
Brandt KD-90 [] [] []
Series
Anderson Manufacturing Technologies,
80 Harwood Dr.,
St. Albert, Alberta, Canada T8N 6G3
Tel. 780/459-6320
147005
Atlantic Machinery Corp.,
36 South End Plaza,
New Milford, CT 06776
Tel. 860/354-7200
FAX 860/354-0315
VITAP BC 91
Quartz
Biesse Group America,
P.O. Box 19849,
Charlotte, NC 28219-9849
Tel. 704/357-3131
FAX: 704/357-3130
Polymac
Single 89
Ergho 2
Polymac []
Ergho 3
Polymac OPT OPT []
Ergho 5 OPT OPT []
Ergho 7
Product
Name/No. Fine trimming Staining
Adwood Corp.,
P.O. Box 1195,
High Point, NC 27261
Tel. 336/884-1846
FAX 336/841-6493
Adwood EP 2S
Adwood EP 3T
Adwood EP 7
Adwood EP 8
Adwood EP 9
Adwood EP 11
Adwood [] []
300-Series
Adwood [] []
400-Series
Adwood EP-C
Adwood
200 SF-Series
Altendorf America, Div. of
Stiles Machinery Inc.,
P.O. Box 316, 3965 44th St. S.E.,
Grand Rapids, MI 49512
Tel. 616/698-8456
Brandt KTD-72
Brandt F-13 []
Trimmer
Brandt KD-50 []
Optimat
Brandt KD-60 []
Optimat
Brandt KD-70 []
Optimat
Brandt KD-97CF []
Optimist
Brandt KD-90 []
Series
Anderson Manufacturing Technologies,
80 Harwood Dr.,
St. Albert, Alberta, Canada T8N 6G3
Tel. 780/459-6320
147005
Atlantic Machinery Corp.,
36 South End Plaza,
New Milford, CT 06776
Tel. 860/354-7200
FAX 860/354-0315
VITAP BC 91
Quartz
Biesse Group America,
P.O. Box 19849,
Charlotte, NC 28219-9849
Tel. 704/357-3131
FAX: 704/357-3130
Polymac
Single 89
Ergho 2
Polymac []
Ergho 3
Polymac []
Ergho 5 []
Ergho 7
Product
Name/No. Other (Specify)
Adwood Corp.,
P.O. Box 1195,
High Point, NC 27261
Tel. 336/884-1846
FAX 336/841-6493
Adwood EP 2S Automatic feeder
Adwood EP 3T Automatic feeder
Adwood EP 7 Up to 5mm capacity;
High frequency
motors, PLC
Adwood EP 8 Same as above.
Adwood EP 9 Same as above.
Adwood EP 11 Same as above
Adwood Up to 3/8" capacity.
300-Series
Adwood Up to 3/4" capacity
400-Series
Adwood EP-C
Adwood
200 SF-Series
Altendorf America, Div. of
Stiles Machinery Inc.,
P.O. Box 316, 3965 44th St. S.E.,
Grand Rapids, MI 49512
Tel. 616/698-8456
Brandt KTD-72
Brandt F-13
Trimmer
Brandt KD-50
Optimat
Brandt KD-60
Optimat
Brandt KD-70
Optimat
Brandt KD-97CF
Optimist
Brandt KD-90
Series
Anderson Manufacturing Technologies,
80 Harwood Dr.,
St. Albert, Alberta, Canada T8N 6G3
Tel. 780/459-6320
147005
Atlantic Machinery Corp.,
36 South End Plaza,
New Milford, CT 06776
Tel. 860/354-7200
FAX 860/354-0315
VITAP BC 91 Optional guillotine
to cut 3mm PVC.
Optional RC 91self
standing 3mm PVC
trimming unit
Quartz Mechanical digital
readout
Biesse Group America,
P.O. Box 19849,
Charlotte, NC 28219-9849
Tel. 704/357-3131
FAX: 704/357-3130
Polymac
Single 89
Ergho 2
Polymac PLC control
Ergho 3
Polymac PLC control
Ergho 5 PLC control
Ergho 7
Polymac Ergho 9 [] []
Stream B1 & B2 [] [] []
Millennium [] [] []
OMNIA [] []
DMG - Delmac Machinery Group,
4322 Piedmont Parkway,
Greensboro, NC 27410
Tel. 336/854-1211
FAX 336/854-0811
Delmac Contour Bander 60CB [] []
Delmac Contour Trimmer 62CT []
Gabbiani 400 and 500 [] [] []
Series Banders
Gabbiani Combination [] []
Machine Panelmatic
Fletcher Machine Co.,
4305 E. US Hwy. 64,
Lexington, NC 27292
Tel. 800/438-1054
FAX 336/249-6890
FM-45 [] [] []
FM-200 [] [] []
Frama-Tech Inc.,
2001 S. Acacia Ave.,
Compton, CA 90220
800/622-9663
FAX 310/632-4000
EB-S-C [] []
EB-10-C [] []
EB-25 [] []
AG-98 [] []
Hess Group America,
P.O. Box 911,
Point Pleasant, NJ 08742
Tel. 800/973-HESS
FAX 732/295-3753
Mobile [] []
Hofer Inc.,
P.O. Box 832100,
Delray Beach, FL 33483
Tel. 561/265-3635
FAX 561/265-1240
Hofer US 2000-5000 Series
Holz-Her U.S. Inc.,
5120 Westinghouse Blvd.,
Charlotte, NC 28273
Tel. 704/587-3400
FAX 704/587-3419
Quick Series [] []
Genesis Series [] [] []
1435SE/PLC [] []
Sprint Series [] []
New Accord 1465-1469 [] []
Triathion 360-480 [] []
Polymac Ergho 9 Same []
Stream B1 & B2 8' - 80' []
Millennium 33' []
OMNIA 120' [] []
DMG - Delmac Machinery Group,
4322 Piedmont Parkway,
Greensboro, NC 27401
Tel. 336/854-1211
FAX 336/854-0811
Delmac Contour Bander 60CB 12-60 ft/min []
Delmac Contour Trimmer 62CT 12-60 ft/min
Gabbian 400 aand 500 20-118 ft/min [] []
Series Banders
Gabbiani Combination 20-196 ft/min []
Machine Panelmatic
Fletcher Machine Co.,
4305 E. US Hwy 64,
Lexington, NC 27292
Tel. 800/438-1054
FAX 336/249-6890
FM-45 0-90 fpm [] []
FM-200 0-90 fpm [] []
Frama-Tech Inc.,
2001 S. Acacia Ave.,
Compton, CA 90220
800/622-9663
FAX 310/632-4000
EB-S-C Variable []
EB-10-C Variable []
EB-25 15 fpm []
AG-98 Variable []
Hess Group America,
P.O. Box 911,
Point Pleasant, NJ 08742
Tel. 800/973-HESS
FAX 732/295-3753
Mobile
Hofer Inc.,
P.O. Box 832100,
Delray Beach, FL 33483
Tel. 561/265-3635
FAX 561/265-1240
Hofer US 2000-5000 Series []
Holz-Her U.S. Inc.,
5120 Westinghouse Blvd.,
Charlotte, NC 28273
Tel. 704/587-3400
FAX 704/587/3419
Quick Series 5m/min. (16 ft./min.) []
Genesis Series 11 m/min. (38 ft./min.) []
1435SE/PLC 11m/min. (36 ft./min.) vs []
26-5fpm
Sprint Series See above []
New Accord 1465-1469 Variable speed 8-20 mph []
(26-65 fpm)
Triathion 360-480 Variable speed 8-20/min.
(26-65 ft./min.)
Polymac Ergho 9
Stream B1 & B2 PUR
Millennium PUR
OMNIA PUR & EVA
DMG - Delmac Machinery Group,
4322 Piedmont Parkway,
Greensboro, NC 27401
Tel. 336/854-1211
FAX 336/854-0811
Delmac Contour Bander 60CB
Delmac Contour Trimmer 62CT
Gabbian 400 aand 500 [] []
Series Banders
Gabbiani Combination [] []
Machine Panelmatic
Fletcher Machine Co.,
4305 E. US Hwy 64,
Lexington, NC 27292
Tel. 800/438-1054
FAX 336/249-6890
FM-45
FM-200
Frama-Tech Inc.,
2001 S. Acacia Ave.,
Compton, CA 90220
800/622-9663
FAX 310/632-4000
EB-S-C
EB-10-C
EB-25
AG-98
Hess Group America,
P.O. Box 911,
Point Pleasant, NJ 08742
Tel. 800/973-HESS
FAX 732/295-3753
Mobile []
Hofer Inc.,
P.O. Box 832100,
Delray Beach, FL 33483
Tel. 561/265-3635
FAX 561/265-1240
Hofer US 2000-5000 Series
Holz-Her U.S. Inc.,
5120 Westinghouse Blvd.,
Charlotte, NC 28273
Tel. 704/587-3400
FAX 704/587/3419
Quick Series
Genesis Series
1435SE/PLC
Sprint Series
New Accord 1465-1469
Triathion 360-480
Polymac Ergho 9 10mm-45mm []
Stream B1 & B2 10mm-60mm [] []
Millennium 16mm-50mm []
OMNIA 10mm-60mm [] []
DMG - Delmac Machinery Group,
4322 Piedmont Parkway,
Greensboro, NC 27401
Tel. 336/854-1211
FAX 336/854-0811
Delmac Contour Bander 60CB Variable [] []
Delmac Contour Trimmer 62CT Variable
Gabbian 400 aand 500 Variable [] []
Series Banders
Gabbiani Combination Variable [] []
Machine Panelmatic
Fletcher Machine Co.,
4305 E. US Hwy 64,
Lexington, NC 27292
Tel. 800/438-1054
FAX 336/249-6890
FM-45 3"+ [] []
FM-200 5"+ [] []
Frama-Tech Inc.,
2001 S. Acacia Ave.,
Compton, CA 90220
800/622-9663
FAX 310/632-4000
EB-S-C Any size [] []
EB-10-C Any size [] []
EB-25 7/16 to 29/16" []
AG-98 1/2 to 2"
Hess Group America,
P.O. Box 911,
Point Pleasant, NJ 08742
Tel. 800/973-HESS
FAX 732/295-3753
Mobile Up to 1 1/4" thick x 2" high []
ending (approx.1 min.)
Hofer Inc.,
P.O. Box 832100,
Delray Beach, FL 33483
Tel. 561/265-3635
FAX 561/265-1240
Hofer US 2000-5000 Series []
Holz-Her U.S. Inc.,
5120 Westinghouse Blvd.,
Charlotte, NC 28273
Tel. 704/587-3400
FAX 704/587/3419
Quick Series Same as above []
Genesis Series Width 85mm (3-3/8") Length
180mm (7") Height 6mm (1/4")
to 45mm (1-3/4"), Max. edge
Thickness 5mm
1435SE/PLC Same as above []
Sprint Series 13mm edge capacity []
New Accord 1465-1469 Width 60mm (2-3/8") Length [] []
140mm (5-3/4") Height 6mm
(1/4") to 60mm (2-3/8") Max
edge thick 30mm
Triathion 360-480 See above []
Polymac Ergho 9
Stream B1 & B2 []
Millennium [] []
OMNIA []
DMG - Delmac Machinery Group,
4322 Piedmont Parkway,
Greensboro, NC 27401
Tel. 336/854-1211
FAX 336/854-0811
Delmac Contour Bander 60CB [] []
Delmac Contour Trimmer 62CT []
Gabbian 400 aand 500 []
Series Banders
Gabbiani Combination []
Machine Panelmatic
Fletcher Machine Co.,
4305 E. US Hwy 64,
Lexington, NC 27292
Tel. 800/438-1054
FAX 336/249-6890
FM-45
FM-200
Frama-Tech Inc.,
2001 S. Acacia Ave.,
Compton, CA 90220
800/622-9663
FAX 310/632-4000
EB-S-C []
EB-10-C []
EB-25
AG-98
Hess Group America,
P.O. Box 911,
Point Pleasant, NJ 08742
Tel. 800/973-HESS
FAX 732/295-3753
Mobile
Hofer Inc.,
P.O. Box 832100,
Delray Beach, FL 33483
Tel. 561/265-3635
FAX 561/265-1240
Hofer US 2000-5000 Series
Holz-Her U.S. Inc.,
5120 Westinghouse Blvd.,
Charlotte, NC 28273
Tel. 704/587-3400
FAX 704/587/3419
Quick Series
Genesis Series
1435SE/PLC
Sprint Series
New Accord 1465-1469 []
Triathion 360-480
Polymac Ergho 9 pre-mil, 4 motor corner rounding
Stream B1 & B2 CNC tool change
Millennium Automatic panel load and off-loading
OMNIA Numerous - machine is fully customized
DMG - Delmac Machinery Group,
4322 Piedmont Parkway,
Greensboro, NC 27401
Tel. 336/854-1211
FAX 336/854-0811
Delmac Contour Bander 60CB Contour & straight parts, thin PVC,
HPL & 3mm PVC
Delmac Contour Trimmer 62CT Independent trimmer, Adjustable RPM,
floating heads
Gabbian 400 aand 500 Options: quick melt, PC-programmable,
Series Banders solid wood 3mm PVC, HPL, sanding 3mm
corner rounding, pre-milling.
Gabbiani Combination Options: quick melt, PC-programming,
Machine Panelmatic tenoning, squaring, high speed
bandiing, softforming, foiling
Fletcher Machine Co.,
4305 E. US Hwy 64,
Lexington, NC 27292
Tel. 800/438-1054
FAX 336/249-6890
FM-45
FM-200
Frama-Tech Inc.,
2001 S. Acacia Ave.,
Compton, CA 90220
800/622-9663
FAX 310/632-4000
EB-S-C 1 phase
EB-10-C 1 phase
EB-25 Top, bottom, and trim, 1 phase
AG-98 110 volts, hand-held
Hess Group America,
P.O. Box 911,
Point Pleasant, NJ 08742
Tel. 800/973-HESS
FAX 732/295-3753
Mobile Work horiz.or vert; butt or mitered
corners; mica, tape, lumber bands,
waterfall & pre shaped edgebanding
Hofer Inc.,
P.O. Box 832100,
Delray Beach, FL 33483
Tel. 561/265-3635
FAX 561/265-1240
Hofer US 2000-5000 Series
Holz-Her U.S. Inc.,
5120 Westinghouse Blvd.,
Charlotte, NC 28273
Tel. 704/587-3400
FAX 704/587/3419
Quick Series Same as above exc. edge belt feed
Genesis Series Central dust collector, top unit
automatically adjusts with
pressure beam; cartridge glue
nozzle syst; edge feed belt; end
trimming; top & bottom trimming.
1435SE/PLC Same as above + high frequency
motors and scraping unit
Sprint Series Full PLC controk, prog. for all
apps., comer rounding, pneumatic
changeover system
New Accord 1465-1469 Programmable edgebander w/ user-
friendly screen & PLC, Choice
of Cartridge or Granulate glue
systems. Pneumatic Changeover
System (PCS). Premiling avail.
Choice of 26 working units.
Optional PC Control.
Triathion 360-480 Programmable edgebander w/ user-
friendly screen & PLC. Choice of
cartridge or Granulate glue systems.
Pneumatic Changeover System (PCS).
Premilling avail. Choice of 26
working units. Optional PC Control.
Polymac Ergho 9 OPT OPT [] []
Stream B1 & B2 [] OPT OPT [] []
Millennium [] []
OMNIA [] [] [] [] []
DMG - Delmac Machinery Group,
4322 Piedmont Parkway,
Greensboro, NC 27401
Tel. 336/854-1211
FAX 336/854-0811
Delmac Contour Bander 60CB
Delmac Contour Trimmer 62CT
Gabbian 400 aand 500 [] [] [] [] [] []
Series Banders
Gabbiani Combination [] [] [] [] [] []
Machine Panelmatic
Fletcher Machine Co.,
4305 E. US Hwy 64,
Lexington, NC 27292
Tel. 800/438-1054
FAX 336/249-6890
FM-45 [] [] [] [] [] []
FM-200 [] [] [] [] [] []
Frama-Tech Inc.,
2001 S. Acacia Ave.,
Compton, CA 90220
800/622-9663
FAX 310/632-4000
EB-S-C
EB-10-C
EB-25
AG-98
Hess Group America,
P.O. Box 911,
Point Pleasant, NJ 08742
Tel. 800/973-HESS
FAX 732/295-3753
Mobile
Hofer Inc.,
P.O. Box 832100,
Delray Beach, FL 33483
Tel. 561/265-3635
FAX 561/265-1240
Hofer US 2000-5000 Series [] [] []
Holz-Her U.S. Inc.,
5120 Westinghouse Blvd.,
Charlotte, NC 28273
Tel. 704/587-3400
FAX 704/587/3419
Quick Series []
Genesis Series []
1435SE/PLC
Sprint Series
New Accord 1465-1469 [] [] [] [] []
Triathion 360-480 [] [] [] []
Polymac Ergho 9 PLC control
Stream B1 & B2 PLC and PC control
Millennium PC control
OMNIA PC control
DMG - Delmac Machinery Group,
4322 Piedmont Parkway,
Greensboro, NC 27401
Tel. 336/854-1211
FAX 336/854-0811
Delmac Contour Bander 60CB Sm. univer, bander Min. radius
7/8"
Delmac Contour Trimmer 62CT
Gabbian 400 aand 500 Complete line of heavy duty,
Series Banders single-sided banders.
Gabbiani Combination
Machine Panelmatic
Fletcher Machine Co.,
4305 E. US Hwy 64,
Lexington, NC 27292
Tel. 800/438-1054
FAX 336/249-6890
FM-45 Corner rounding
FM-200 Corner rounding
Frama-Tech Inc.,
2001 S. Acacia Ave.,
Compton, CA 90220
800/622-9663
FAX 310/632-4000
EB-S-C
EB-10-C
EB-25
AG-98
Hess Group America,
P.O. Box 911,
Point Pleasant, NJ 08742
Tel. 800/973-HESS
FAX 732/295-3753
Mobile Pre-heating of edge strips; coil
holder; opt. 2" thick capacity;
4" edge height capacity
Hofer Inc.,
P.O. Box 832100,
Delray Beach, FL 33483
Tel. 561/265-3635
FAX 561/265-1240
Hofer US 2000-5000 Series
Holz-Her U.S. Inc.,
5120 Westinghouse Blvd.,
Charlotte, NC 28273
Tel. 704/587-3400
FAX 704/587/3419
Quick Series
Genesis Series 3mm rad. poss. 3 min. glue heatup
time, pneumatic changeover,
system scraping
1435SE/PLC Pneumatic Changeover System (PCS)
Sprint Series Premilling available
New Accord 1465-1469 PC control Network capable
Premilling
Triathion 360-480 Optional PC control
IMA America Corp., []
P.O. Box 90068,
Raleigh, NC 27675
Tel. 919/484-3130
FAX 919/484-2161
IMA HKA [] []
Compact 312 [] 10m/min
Compact 5220 [] 8-20/min []
Compact PC [] 8-20m/min [] []
6220
Compact 3000- [] [] [] []
8000
Novimat [] 8-30m/min [] []
Combima [] [] 8-160m/min
Combiform [] 8-30m/min
L&L Machinery Inc.
1614 Industrial Dr.,
Wilkesboro, NC 28697
Tel. 336/838-3398
GA100 [] [] [] Batch
DA100 [] [] Batch
Laguna Tools,
17101 Murphy Ave.,
Irvine, CA 92614
Tel. 800/234-1976 or
949/474-1200
FAX 714/497-1346
30/10 [] [] 18 []
20/101 [] [] 18 []
Lobo Machine Tools,
9034 Bermudez St.,
Pico Rivera, CA 90660
Tel. 562/949-3747 []
FAX 562/948-4171
Lobo EB-1 7-98 fpm []
EB-200 [] 6-30 fpm []
Masterwood Group USA,
6601 North Park Blvd., Ste. E,
Charlotte, NC 28216
Tel. 704/921-9994
FAX 704/921-9930
XT82 R [] [] 11 mpm []
XT83 RS [] [] 11 mpm []
XT83 2R [] [] 11 mpm []
XT84 2RS [] [] 11 mpm []
XT84 RRS [] [] 11 mpm []
XT85 2RRS [] [] 11 mpm []
Midwest Automation,
2645 26th Ave. South,
Minneapolis, MN 55406
Tel. 612/721-5347
Maxmatic [] [] [] 5-20 mpm []
PE 1000 [] [] 10-30 mpm []
Practical Products Co.,
3925 Virginia Ave.,
Cincinnati, OH 45227
Tel. 513/561-6560
FAX 513/561-6778
Practical EB101 [] [] 4-10 fpm []
Eric Riebling Co.,
106 Miller Place
Mt. Vernon, NY 10550
Tel. 914/668-4800
FAX 914/668-6438
Ott Atlantic [] [] 40 fpm []
Ott Unimatic [] [] 30-70 fpm []
Ott Euromatic [] [] 30-70 fpm []
Ott Easymatic [] [] 40 fpm []
Ott Profitmatic [] [] 30-70 fpm []
Ott Pacific [] [] 40 fpm []
Comb. hot melt
Cartridge glue pot/PVAc
IMA America Corp.,
P.O. Box 90068,
Raleigh, NC 27675
Tel. 919/484-3130
FAX 919/484-2161
IMA HKA
Compact 312
Compact 5220
Compact PC
6220
Compact 3000-
8000
Novimat []
Combima []
Combiform []
L&L Machinery Inc.
1614 Industrial Dr.,
Wilkesboro, NC 28697
Tel. 336/838-3398
GA100 []
DA100 []
Laguna Tools,
17101 Murphy Ave.,
Irvine, CA 92614
Tel. 800/234-1976 or
949/474-1200
FAX 714/497-1346
30/10
20/101
Lobo Machine Tools,
9034 Bermudez St.,
Pico Rivera, CA 90660
Tel. 562/949-3747
FAX 562/948-4171
Lobo EB-1
EB-200
Masterwood Group USA,
6601 North Park Blvd., Ste. E,
Charlotte, NC 28216
Tel. 704/921-9994
FAX 704/921-9930
XT82 R
XT83 RS
XT83 2R
XT84 2RS
XT84 RRS
XT85 2RRS
Midwest Automation,
2645 26th Ave. South,
Minneapolis, MN 55406
Tel. 612/721-5347
Maxmatic
PE 1000
Practical Products Co.,
3925 Virginia Ave.,
Cincinnati, OH 45227
Tel. 513/561-6560
FAX 513/561-6778
Practical EB101
Eric Riebling Co.,
106 Miller Place
Mt. Vernon, NY 10550
Tel. 914/668-4800
FAX 914/668-6438
Ott Atlantic
Ott Unimatic
Ott Euromatic
Ott Easymatic
Ott Profitmatic
Ott Pacific
IMA America Corp.,
P.O. Box 90068,
Raleigh, NC 27675
Tel. 919/484-3130
FAX 919/484-2161
IMA HKA Special [] []
Compact 312 [] [] []
Compact 5220 [] [] []
Compact PC [] [] [] []
6220
Compact 3000- [] [] [] []
8000
Novimat
Combima
Combiform [] [] [] []
L&L Machinery Inc.
1614 Industrial Dr.,
Wilkesboro, NC 28697
Tel. 336/838-3398
GA100 No limit [] []
DA100 No limit [] []
Laguna Tools,
17101 Murphy Ave.,
Irvine, CA 92614
Tel. 800/234-1976 or
949/474-1200
FAX 714/497-1346
30/10 []
20/101 []
Lobo Machine Tools,
9034 Bermudez St.,
Pico Rivera, CA 90660
Tel. 562/949-3747
FAX 562/948-4171
Lobo EB-1 160-
unlimited
EB-200 2/5"-2-3/8" [] [] []
Masterwood Group USA, thickness
6601 North Park Blvd., Ste. E,
Charlotte, NC 28216
Tel. 704/921-9994
FAX 704/921-9930
XT82 R Height: 10 - 45 []
Length: 450mm
-2200mm; Edge
thickness; 4
3mm coil; 3
8mm strips;
XT83 RS Same []
XT83 2R Same []
XT84 2RS Same []
XT84 RRS Same [] []
XT85 2RRS Same [] []
Midwest Automation,
2645 26th Ave. South,
Minneapolis, MN 55406
Tel. 612/721-5347
Maxmatic [] [] []
PE 1000 Varies [] []
Practical Products Co.,
3925 Virginia Ave.,
Cincinnati, OH 45227
Tel. 513/561-6560
FAX 513/561-6778
Practical EB101 To 50 mm []
Eric Riebling Co.,
106 Miller Place
Mt. Vernon, NY 10550
Tel. 914/668-4800
FAX 914/668-6438
Ott Atlantic 4x3 [] []
Ott Unimatic 4x3 [] []
Ott Euromatic 4x3 [] []
Ott Easymatic 4x3 [] []
Ott Profitmatic 4x3 [] []
Ott Pacific 4x3 [] []
IMA America Corp.,
P.O. Box 90068,
Raleigh, NC 27675
Tel. 919/484-3130
FAX 919/484-2161
IMA HKA Manual operation w/ over-
head counter balance and
vacuum holding system
Compact 312 Compact size on IMA's
sturdy frame.
Compact 5220 Over 1000mm of open
space for avail, options
Compact PC Total setup controlled by PC
6220 The ultimate time saver.
Compact 3000- Built exactly the way you [] []
8000 want w/ this modular system
Novimat From solid wood to intricate [] []
edging, this is a prove work
horse. PC control of standard
Combima Available on customer [] []
demand. New NT control &
all other IMA opts. available
Combiform IMA WOP software. CNC []
control off all working units
for linear contour edge-
banding and softforming.
L&L Machinery Inc.
1614 Industrial Dr.,
Wilkesboro, NC 28697
Tel. 336/838-3398
GA100
DA100
Laguna Tools,
17101 Murphy Ave.,
Irvine, CA 92614
Tel. 800/234-1976 or
949/474-1200
FAX 714/497-1346
30/10 3mm tape
20/101 3mm tape
Lobo Machine Tools,
9034 Bermudez St.,
Pico Rivera, CA 90660
Tel. 562/949-3747
FAX 562/948-4171
Lobo EB-1
EB-200
Masterwood Group USA,
6601 North Park Blvd., Ste. E,
Charlotte, NC 28216
Tel. 704/921-9994
FAX 704/921-9930
XT82 R Glue pre-heating system,
"smart" temp. guage, trim
motors titable 0-12 degrees
w/no tools req; quick release
blade change; digital mech.
indicators on top, bottom,
radius, trim units and
scraping units
XT83 RS Same as above
XT83 2R Same as above
XT84 2RS Same as above
XT84 RRS Same as above
XT85 2RRS Same as above
Midwest Automation,
2645 26th Ave. South,
Minneapolis, MN 55406
Tel. 612/721-5347
Maxmatic
PE 1000 Pre-programming []
for 10 profiles
Practical Products Co.,
3925 Virginia Ave.,
Cincinnati, OH 45227
Tel. 513/561-6560
FAX 513/561-6778
Practical EB101 Table top
Eric Riebling Co.,
106 Miller Place
Mt. Vernon, NY 10550
Tel. 914/668-4800
FAX 914/668-6438
Ott Atlantic PLC control
Ott Unimatic PLC control, line control []
Ott Euromatic PLC control, line control
Ott Easymatic PLC control
Ott Profitmatic PLC control, line control []
Ott Pacific PLC control []
IMA America Corp.,
P.O. Box 90068,
Raleigh, NC 27675
Tel. 919/484-3130
FAX 919/484-2161
IMA HKA Machine comes
complete
Compact 312 Available on
customer demand
Compact 5220 Available on
customer demand
Compact PC Available on
6220 customer demand
Compact 3000- [] [] [] [] Available on
8000 customer demand
Novimat [] [] [] [] Available on
customer demand
Combima [] [] [] [] Available on
customer demand
Combiform [] [] Available on
customer demand
L&L Machinery Inc.
1614 Industrial Dr.,
Wilkesboro, NC 28697
Tel. 336/838-3398
GA100 Core stock
lamination
DA100
Laguna Tools,
17101 Murphy Ave.,
Irvine, CA 92614
Tel. 800/234-1976 or
949/474-1200
FAX 714/497-1346
30/10 [] Call for video
20/101 [] Call for video
Lobo Machine Tools,
9034 Bermudez St.,
Pico Rivera, CA 90660
Tel. 562/949-3747
FAX 562/948-4171
Lobo EB-1
EB-200 [] [] []
Masterwood Group USA,
6601 North Park Blvd., Ste. E,
Charlotte, NC 28216
Tel. 704/921-9994
FAX 704/921-9930
XT82 R
XT83 RS []
XT83 2R
XT84 2RS [] []
XT84 RRS []
XT85 2RRS []
Midwest Automation,
2645 26th Ave. South,
Minneapolis, MN 55406
Tel. 612/721-5347
Maxmatic []
PE 1000 [] []
Practical Products Co.,
3925 Virginia Ave.,
Cincinnati, OH 45227
Tel. 513/561-6560
FAX 513/561-6778
Practical EB101 []
Eric Riebling Co.,
106 Miller Place
Mt. Vernon, NY 10550
Tel. 914/668-4800
FAX 914/668-6438
Ott Atlantic [] [] []
Ott Unimatic [] [] [] Surface scraping
Ott Euromatic [] Pre-mill
Ott Easymatic [] Programmable
Ott Profitmatic [] [] [] Automatic fine adjust
Ott Pacific [] [] [] Pre-mill
Manual
SCM GROUP USA
2475-B Satellite Blvd.,
Duluth, GA 30096
Tel. 770/813-8818
FAX 770/813-8819
IDM Idimatic [] [] 40 & 60 fpm
25 - 49/58
(5 models)
IDM Idimatic [] [] 40 & 60 fpm
53 & 66
Activa/1 [] [] 27-106 fpm
48-103
(12 models)
Activa/2 [] [] 27-106 fpm
48-103
(12 models)
Activa/25B [] [] 27-132 fpm
54-108
(7 models)
Stefanl [] [] 27-132 fpm
Monomatic
6300-15300
(11 models)
Stefanl [] [] 27-132 fpm
IBimatic
4500-15300
(13 models)
Stefanl [] [] 27-198 fpm
Major
5300-18200
(19 models)
OLIMPIC [] [] [] 20-120 fpm
NOVA 300 and
MS Series
SCMI S212 [] [] 40/60 fpm
SCMI S220 [] [] 40/60 fpm
SCMI K201 [] [] 25 fpm
SCMI K203 [] [] 30 fpm
SCMI K208 [] [] 36 fpm
SL Woodworking Machinery Inc.,
1427-C Boulder Ct.,
Greensboro, NC 27409
Tel. 336/294-9024
FAX 336/294-9496
EB77S2 [] [] 18 m/min.
12 m/min.
EB87S3 [] [] 8 m/min.
12 m/min.
EB97S4 [] [] Variable
Stiles Machinery Inc.,
3965 44th St. S.E.,
Grand Rapids, MI 49512
Tel. 616/698-7500
FAX 616/698-9411
Brandt KTV 51 [] [] 13 ft./min.
Brandt KTD 51 [] [] 13 ft./min.
Brandt KE Series [] [] 23-82 ft./min.
Homag BAZ [] 0-266
Homag BAK [] 0-240
Homag KLO 70 Series [] [] 40-79 ft./min.
Homag SE-9300 [] [] 59-78 ft./min.
Homag SE-9300/S2 [] [] Same as above
Homag SE-9500 [] [] Same as above
Homag SE-9500/S2 [] [] Same as above
Homag SE-9600 [] [] Same as above
Homag SE-9800/S2 [] [] Same as above
Cartridge PVAc cold glue
SCM GROUP USA
2475-B Satellite Blvd.,
Duluth, GA 30096
Tel. 770/813-8818
FAX 770/813-8819
IDM Idimatic [] []
25 - 49/58
(5 models)
IDM Idimatic [] []
53 & 66
Activa/1 [] []
48-103
(12 models)
Activa/2 [] []
48-103
(12 models)
Activa/25B [] []
54-108
(7 models)
Stefanl [] []
Monomatic
6300-15300
(11 models)
Stefanl [] []
IBimatic
4500-15300
(13 models)
Stefanl [] []
Major
5300-18200
(19 models)
OLIMPIC []
NOVA 300 and
MS Series
SCMI S212 [] []
SCMI S220 [] []
SCMI K201 []
SCMI K203 []
SCMI K208 [] []
SL Woodworking Machinery Inc.,
1427-C Boulder Ct.,
Greensboro, NC 27409
Tel. 336/294-9024
FAX 336/294-9496
EB77S2 []
EB87S3 []
EB97S4 []
Stiles Machinery Inc.,
3965 44th St. S.E.,
Grand Rapids, MI 49512
Tel. 616/698-7500
FAX 616/698-9411
Brandt KTV 51 []
Brandt KTD 51 []
Brandt KE Series []
Homag BAZ []
Homag BAK []
Homag KLO 70 Series []
Homag SE-9300 []
Homag SE-9300/S2 []
Homag SE-9500 []
Homag SE-9500/S2 []
Homag SE-9600 []
Homag SE-9800/S2 []
Comb. hot melt glue
pot/PVAc
SCM GROUP USA
2475-B Satellite Blvd.,
Duluth, GA 30096
Tel. 770/813-8818
FAX 770/813-8819
IDM Idimatic Variable
25 - 49/58
(5 models)
IDM Idimatic Variable
53 & 66
Activa/1 Variable
48-103
(12 models)
Activa/2 Variable
48-103
(12 models)
Activa/25B Variable
54-108
(7 models)
Stefanl Variable
Monomatic
6300-15300
(11 models)
Stefanl Variable
IBimatic
4500-15300
(13 models)
Stefanl Variable
Major
5300-18200
(19 models)
OLIMPIC Variable
NOVA 300 and
MS Series
SCMI S212 Variable
SCMI S220 Variable
SCMI K201 Variable
SCMI K203 Variable
SCMI K208 Variable
SL Woodworking Machinery Inc.,
1427-C Boulder Ct.,
Greensboro, NC 27409
Tel. 336/294-9024
FAX 336/294-9496
EB77S2 3.75" min.
No max.
EB87S3 3.75" min.
EB97S4 3.75" min.
Stiles Machinery Inc.,
3965 44th St. S.E.,
Grand Rapids, MI 49512
Tel. 616/698-7500
FAX 616/698-9411
Brandt KTV 51 Variable
Brandt KTD 51 Variable
Brandt KE Series Variable
Homag BAZ Varies by model
Homag BAK Varies by model
Homag KLO 70 Series Variable
Homag SE-9300 Variable
Homag SE-9300/S2 Variable
Homag SE-9500 Variable
Homag SE-9500/S2 Variable
Homag SE-9600 Variable
Homag SE-9800/S2 Variable
SCM GROUP USA
2475-B Satellite Blvd.,
Duluth, GA 30096
Tel. 770/813-8818
FAX 770/813-8819
IDM Idimatic []
25 - 49/58
(5 models)
IDM Idimatic []
53 & 66
Activa/1 [] []
48-103
(12 models)
Activa/2 [] []
48-103
(12 models)
Activa/25B [] []
54-108
(7 models)
Stefanl [] []
Monomatic
6300-15300
(11 models)
Stefanl [] []
IBimatic
4500-15300
(13 models)
Stefanl [] []
Major
5300-18200
(19 models)
OLIMPIC [] [] []
NOVA 300 and
MS Series
SCMI S212 [] []
SCMI S220 [] []
SCMI K201 []
SCMI K203 [] []
SCMI K208 [] []
SL Woodworking Machinery Inc.,
1427-C Boulder Ct.,
Greensboro, NC 27409
Tel. 336/294-9024
FAX 336/294-9496
EB77S2 []
EB87S3 []
EB97S4 []
Stiles Machinery Inc.,
3965 44th St. S.E.,
Grand Rapids, MI 49512
Tel. 616/698-7500
FAX 616/698-9411
Brandt KTV 51 [] [] []
Brandt KTD 51 [] [] []
Brandt KE Series []
Homag BAZ [] [] [] []
Homag BAK [] [] [] []
Homag KLO 70 Series [] []
Homag SE-9300 []
Homag SE-9300/S2 []
Homag SE-9500 []
Homag SE-9500/S2 []
Homag SE-9600 []
Homag SE-9800/S2 []
SCM GROUP USA
2475-B Satellite Blvd.,
Duluth, GA 30096
Tel. 770/813-8818
FAX 770/813-8819
IDM Idimatic Quick melt glue pot. []
25 - 49/58 Heavy feeding chain. Low
(5 models) maintenance adjustment
when changing panel
thickness. 3 mm PVC
capable. HF motors
IDM Idimatic Rectifying unit and round []
53 & 66 trimmer, on line
microprocessor
Activa/1 Heavy duty high [] []
48-103 production rounders
(12 models)
Activa/2 Same as above [] []
48-103
(12 models)
Activa/25B Combined DET and bander, [] []
54-108 high speed feeding, can
(7 models) be alone or in full line,
CNC opt. with rolling
chain
Stefanl Heavy duty, high [] []
Monomatic production, single sided
6300-15300 bander with rolling chain
(11 models)
Stefanl Heavy duty, high [] []
IBimatic production, single bander
4500-15300 with rolling chain
(13 models)
Stefanl Combined DET and bander, [] []
Major high speed feeding, can
5300-18200 be used along or in full
(19 models) line, full CNC, rolling
chain
OLIMPIC OMS Glue; end trim/top & [] []
NOVA 300 and bottom. Radius shapers
MS Series buffing / sanding
premilling
SCMI S212 Pre-Mill, end trim, top/ []
bottom trim/2 motor
corner rounding, scrape;
buffing; hot air, graphic
PLC
SCMI S220 Same as above []
SCMI K201 End trim, top/bottom trim
SCMI K203 End trim, top/bottom trim
2-motor corner rounding,
scrape, buff
SCMI K208 Pre-Mill, end trim, top/
bottom trim/2-Motor
corner rounding scrape,
buff, hot air, graphic
PLC
SL Woodworking Machinery Inc.,
1427-C Boulder Ct.,
Greensboro, NC 27409
Tel. 336/294-9024
FAX 336/294-9496
EB77S2 Separate end trims
EB87S3 Buffer standard included []
EB97S4 []
Stiles Machinery Inc.,
3965 44th St. S.E.,
Grand Rapids, MI 49512
Tel. 616/698-7500
FAX 616/698-9411
Brandt KTV 51 Coil or Strip feed
Brandt KTD 51 Coil or Strip feed
Brandt KE Series Variable feed speed [] []
Homag BAZ CNC router, edgebander, [] []
drilling mach for contour
edgebanded components
Homag BAK CNC countour edgebander [] []
for Pre-Machined
components
Homag KLO 70 Series Double wide hold down [] []
belt, inverter driven
motors
Homag SE-9300 Double wide hold down [] opt
belt, inverter driven
motors
Homag SE-9300/S2 Double wide hold down [] opt
belt, inverter driven
motors
Homag SE-9500 Double wide hold down opt opt
belt, inverter driven
motors
Homag SE-9500/S2 Double wide hold down opt opt
belt, inverter driven
motors
Homag SE-9600 Double wide hold down opt
belt, inverter driven
motors
Homag SE-9800/S2 Double wide hold down opt opt
belt, inverter driven
motors
SCM GROUP USA
2475-B Satellite Blvd.,
Duluth, GA 30096
Tel. 770/813-8818
FAX 770/813-8819
IDM Idimatic [] [] [] []
25 - 49/58
(5 models)
IDM Idimatic [] [] [] []
53 & 66
Activa/1 [] [] [] []
48-103
(12 models)
Activa/2 [] [] [] []
48-103
(12 models)
Activa/25B [] [] [] []
54-108
(7 models)
Stefanl [] [] [] []
Monomatic
6300-15300
(11 models)
Stefanl [] [] [] []
IBimatic
4500-15300
(13 models)
Stefanl [] [] [] []
Major
5300-18200
(19 models)
OLIMPIC [] [] [] []
NOVA 300 and
MS Series
SCMI S212 [] [] [] []
SCMI S220 [] [] []
SCMI K201
SCMI K203 []
SCMI K208 [] []
SL Woodworking Machinery Inc.,
1427-C Boulder Ct.,
Greensboro, NC 27409
Tel. 336/294-9024
FAX 336/294-9496
EB77S2
EB87S3 [] [] [] []
std.
EB97S4 [] [] [] []
Stiles Machinery Inc.,
3965 44th St. S.E.,
Grand Rapids, MI 49512
Tel. 616/698-7500
FAX 616/698-9411
Brandt KTV 51
Brandt KTD 51
Brandt KE Series [] [] [] []
Homag BAZ [] [] []
Homag BAK [] [] [] []
Homag KLO 70 Series [] [] [] []
Homag SE-9300 [] []
Homag SE-9300/S2 [] []
Homag SE-9500 opt [] []
Homag SE-9500/S2 opt [] []
Homag SE-9600 [] []
Homag SE-9800/S2 opt [] []
SCM GROUP USA
2475-B Satellite Blvd.,
Duluth, GA 30096
Tel. 770/813-8818
FAX 770/813-8819
IDM Idimatic Upon request
25 - 49/58
(5 models)
IDM Idimatic Upon request
53 & 66
Activa/1 Upon request
48-103
(12 models)
Activa/2 Upon request
48-103
(12 models)
Activa/25B Upon request
54-108
(7 models)
Stefanl Upon request
Monomatic
6300-15300
(11 models)
Stefanl Upon request
IBimatic
4500-15300
(13 models)
Stefanl Upon request
Major
5300-18200
(19 models)
OLIMPIC 30mm/lumber ready 7
NOVA 300 and press, rollers beam
MS Series frame; Doc end trimmer;
roller, belt hold down.
SCMI S212 Motorized top pressure
beam, pneumatic
positioning on all work
units.
SCMI S220 Motorized top pressure
beam, pneumatic
positioning on all work
units.
SCMI K201 Frequency version avail.
SCMI K203 Pneumatic positioning on
all work units.
SCMI K208 Pneumatic positioning on
all work units.
SL Woodworking Machinery Inc.,
1427-C Boulder Ct.,
Greensboro, NC 27409
Tel. 336/294-9024
FAX 336/294-9496
EB77S2
EB87S3
EB97S4 Shaping
Stiles Machinery Inc.,
3965 44th St. S.E.,
Grand Rapids, MI 49512
Tel. 616/698-7500
FAX 616/698-9411
Brandt KTV 51
Brandt KTD 51
Brandt KE Series
Homag BAZ
Homag BAK
Homag KLO 70 Series Snip, scrape, profile
trim
Homag SE-9300 Line control stand; bar
code opt. Snip, scrape,
profile trim
Homag SE-9300/S2 same as above
Homag SE-9500 same as above
Homag SE-9500/S2 same as above
Homag SE-9600 same as above
Homag SE-9800/S2 same as above
Semi-auto.
Homag SE- [] [] Same as
9800/S2/CNC above
Homag KL 70 [] [] 32-98.
Series ft./min.
Homag KL 80 [] [] 32-98
Series ft./min.
Homag KL 10 [] [] 32-131
Series ft./min.
Homag KL 20 [] [] 32-13
Series ft./min.
Homag KF 10 [] [] 32-131
Series ft./min.
Homag KF 20 [] [] 32-131
Series ft./min.
Homag VF [] [] [] 10-60
Series ft./min.
Homag KF 20 [] [] 100-300
Power Line ft./min.
Homag KF 10 [] 100-300
Power Line ft./min.
Tapes & Tools
P.O. Box 1195
High Paint, NC 27261
Tel. 336/884-5371
FAX 336/841-6493
MC 2 [] [] 12'
Therm O Web Inc.,
770 Glenn Ave.,
Wheeling, IL 60090
Tel. 800/323-0799
K 50+R2FT3 [] 32
K 100/3 [] [] 32
K 70 SCD [] []
BETA [] [] 32
BETA 80 T [] [] 32
Y 203 [] [] 55
Y 2010R [] [] 55
Y 2015R [] [] 55
Y 3010R [] [] 55
Y 3015R [] 55
Y 4010R [] [] 55
Y 4015R [] [] 55
Y 6010R [] [] 55
Y 6015R [] [] 55
Virutex.com Corp.,
601 W. 26th St., 3rd Floor,
New York, NY 10001
Tel. 212/989-9868
FAX: 212/989-1777
EB-25 [] [] 15 fpm
EB-15 [] []
Woodtape,
2300 Merrill Creek Pkwy.,
Everett, WA 98203
Tel. 800/426-6362
FAX 206/349-2121
Woodtape C-25 1-30 ft.
Woodtape C-40 1-60 ft.
Cartridge
Homag SE- [] Variable
9800/S2/CNC
Homag KL 70 [] [] Variable
Series
Homag KL 80 [] [] Variable
Series
Homag KL 10 [] [] Variable
Series
Homag KL 20 1 [] [] Variable
Series
Homag KF 10 [] [] Variable
Series
Homag KF 20 [] [] Variable
Series
Homag VF [] [] [] [] Variable
Series
Homag KF 20 [] [] Variable
Power Line
Homag KF 10 [] Variable
Power Line
Tapes & Tools
P.O. Box 1195
High Paint, NC 27261
Tel. 336/884-5371
FAX 336/841-6493
MC 2 []
Therm O Web Inc.,
770 Glenn Ave.,
Wheeling, IL 60090
Tel. 800/323-0799
K 50+R2FT3 [] 3mm-50mm
K 100/3 [] 3mm-100mm
K 70 SCD [] 3mm-70mm
BETA [] 3mm-70mm
BETA 80 T 3mm-80mm
Y 203 []
Y 2010R [] 3mm-80mm
Y 2015R [] 3mm-80mm
Y 3010R [] 3mm-80mm
Y 3015R [] 3mm-80mm
Y 4010R [] 3mm-80mm
Y 4015R [] 3mm-80mm
Y 6010R [] 3mm-80mm
Y 6015R [] 3mm-80mm
Virutex.com Corp.,
601 W. 26th St., 3rd Floor,
New York, NY 10001
Tel. 212/989-9868
FAX: 212/989-1777
EB-25 [] 7/16" to
2 9/16"
EB-15 [] See above
Woodtape,
2300 Merrill Creek Pkwy.,
Everett, WA 98203
Tel. 800/426-6362
FAX 206/349-2121
Woodtape C-25 Heat 1/4"-2",
bar custom size
to 4" width
Woodtape C-40 Heat 1/2"-2"
bar custom size
to 4" width
Homag SE- []
9800/S2/CNC
Homag KL 70 [] []
Series
Homag KL 80 [] []
Series
Homag KL 10 [] []
Series
Homag KL 20 [] []
Series
Homag KF 10 [] []
Series
Homag KF 20 [] []
Series
Homag VF
Series
Homag KF 20 [] []
Power Line
Homag KF 10 [] []
Power Line
Tapes & Tools
P.O. Box 1195
High Paint, NC 27261
Tel. 336/884-5371
FAX 336/841-6493
MC 2 [] []
Therm O Web Inc.,
770 Glenn Ave.,
Wheeling, IL 60090
Tel. 800/323-0799
K 50+R2FT3 [] [] [] []
K 100/3 [] [] [] []
K 70 SCD [] []
BETA [] []
BETA 80 T [] []
Y 203 [] []
Y 2010R [] []
Y 2015R [] []
Y 3010R [] []
Y 3015R [] []
Y 4010R [] []
Y 4015R [] []
Y 6010R [] []
Y 6015R [] []
Virutex.com Corp.,
601 W. 26th St., 3rd Floor,
New York, NY 10001
Tel. 212/989-9868
FAX: 212/989-1777
EB-25 []
EB-15 [] [] []
Woodtape,
2300 Merrill Creek Pkwy.,
Everett, WA 98203
Tel. 800/426-6362
FAX 206/349-2121
Woodtape C-25 [] []
Woodtape C-40 [] []
Homag SE- Double wide hold down [] opt
9800/S2/CNC belt, inverter driven motors
Homag KL 70 Double wide hold down [] []
Series belt, can also work with
PUR adhesive
Homag KL 80 Can also work with PUR [] []
Series ahesive
Homag KL 10 Rolling chain, double wide [] []
Series hold down belt, can also
work with PUR adhesive
Homag KL 20 Rolling chain, can also [] []
Series work with PUR adhesive
Homag KF 10 Rolling chain, sizing, [] []
Series can also work with PUR
adhesive
Homag KF 20 Rolling chain, sizing, [] []
Series can also work with PUR
adhesive
Homag VF Postformer
Series
Homag KF 20 Rolling chain, doublewide [] []
Power Line top pressure
Homag KF 10 Belt rolling chain []
Power Line
Tapes & Tools
P.O. Box 1195
High Paint, NC 27261
Tel. 336/884-5371
FAX 336/841-6493
MC 2 Gluing PVC tape
Therm O Web Inc.,
770 Glenn Ave.,
Wheeling, IL 60090
Tel. 800/323-0799
K 50+R2FT3 Contour and straight T
& B trimmer combo head
K 100/3 Contour/straight 3mm
K 70 SCD Contour/straight 3mm
BETA End trim saw (HF)
Up to 3mm
BETA 80 T Same as above []
Y 203 Up to 5m (HF) []
Duel end saws
Y 2010R Up to 10mm (HF) []
Duel end saws
Y 2015R Up to 15mm (HF) []
Pre-milling STD
Y 3010R Up to 15mm (HF) []
Pre-milling STD
Y 3015R Up to 15mm (HF) []
Pre-milling STD
Y 4010R Up to 10mm (HF) []
Pre-milling STD
Y 4015R Up to 15mm (HF) []
Pre-milling STD
Y 6010R Up to 10mm (HF) []
Pre-milling STD
Y 6015R Up to 15mm (HF) []
Pre-milling STD
Virutex.com Corp.,
601 W. 26th St., 3rd Floor,
New York, NY 10001
Tel. 212/989-9868
FAX: 212/989-1777
EB-25 Top, bottom, ends
flush, trim
EB-15 See above
Woodtape,
2300 Merrill Creek Pkwy.,
Everett, WA 98203
Tel. 800/426-6362
FAX 206/349-2121
Woodtape C-25 4 Side continuous banding
for preglued edge
banding
Woodtape C-40 4 side continuous banding
for preglued E/B, Pressure
roller & guide attachment
for high speed
Homag SE- opt [] [] Same as above
9800/S2/CNC
Homag KL 70 [] [] [] [] Snip, scrape profile
Series trim, Line control
(PLC)
Homag KL 80 [] [] [] [] Snip, scrape, double
Series sidedprofile trim, Line
Control
Homag KL 10 [] [] [] [] Snip, scrape,
Series profile trim
Homag KL 20 [] [] [] [] Snip, scrape, double
Series sided profile trim
Homag KF 10 [] [] [] [] Snip, scrape,
Series profile trim.
Other on req.
Homag KF 20 [] [] [] [] Snip, scrape, double
Series sided profile trim,
Others on req.
Homag VF
Series
Homag KF 20 [] [] [] [] Snip, scrape,
Power Line profile, trim
Homag KF 10 [] [] [] [] Snip, scrape,
Power Line profile, trim
Tapes & Tools
P.O. Box 1195
High Paint, NC 27261
Tel. 336/884-5371
FAX 336/841-6493
MC 2
Therm O Web Inc.,
770 Glenn Ave.,
Wheeling, IL 60090
Tel. 800/323-0799
K 50+R2FT3 [] Variable speed
K 100/3 [] Variable speed
K 70 SCD []
BETA [] []
BETA 80 T [] []
Y 203 [] [] [] Buffing option
Y 2010R [] [] []
Y 2015R [] [] [] Buffing option
Y 3010R [] [] [] 3 open stations
Corner rounding
Y 3015R [] [] [] 3 open stations
Corner rounding
Y 4010R [] [] [] 4 open stations
Corner rounding
Y 4015R [] [] [] 4 open stations
Corner rounding
Y 6010R [] [] [] 6 open stations
Corner rounding
Y 6015R [] [] [] 6 open stations
Corner rounding
Virutex.com Corp.,
601 W. 26th St., 3rd Floor,
New York, NY 10001
Tel. 212/989-9868
FAX: 212/989-1777
EB-25
EB-15 Feeder
Woodtape,
2300 Merrill Creek Pkwy.,
Everett, WA 98203
Tel. 800/426-6362
FAX 206/349-2121
Woodtape C-25 End cutters
Woodtape C-40 End cutters
PANEL SIZING, BORING & EDGEBANDING
DOUBLE-END TENONER REFERENCE GUIDE
Weight depends on
MANUFACTURER Base construction
Model Discharge piping
Richard T. Byrnes Co. Inc.,
600 Hannum Ave.,
West Chester, PA 19382
Tel. 610/692-2770
FAX 610/696-0330
Bacci TSD Double-end round tenoning
machine for solid wood
parts, including chair
parts, frames, and other
furniture parts. 2700
tenons per hour. CNC/
digital control of axis
available. Hopper feed for
1 person operation.
DMG - Delmac Machinery Group,
4322 Piedmont Parkway,
Greensboro, NC 27410
Tel. 336/854-1211
FAX 336/854-0811
St Weight depends on
model. Steel base
construction. Dust
collection hoods.
Gabbiani-GDG Weight depends on
mod. SV model. Steel base
construction. Dust
collection hoods.
Gabbiani-Monoflex Weight deponds on
model. Steel bese
constroction. Dust
collection hoods.
Danckaert Woodworking Machinery
Co.,
891 Howell Mill Road N.W.,
Atlanta, GA 30318
Tel. 404/873-6477
CELASCHI Double and sizing,
tenoning, shaping,
profiling, sanding, etc.
Machines include most
advanced technology.
Starting with standard
double end machines,
program range includes
equipment fully
electronically controlled
and memorized electronic
shaping contour systems.
Specialized in both panel
and solid wood processing.
TSA N-D-DS Series Variable
TSA C Variable
TSA DBP Variable
PA Double Variable
Sided Profiler
Progress Double Track Variable
Single Sided Tenoner
Celaschimatic Combination Variable
Machine
Squaring/Edgebanding
Derda Inc.,
2249 Reum Road,
Niles, MI 49120
Tel. 616/683-6666
FAX 616/683-8337
Derlegno 2025 lbs.
Model 150 Tenoner
Derlegno 2475 lbs.
Model 250 Tenener
Derda 1650 lbs. Steel
construction. Dust
collection hoods
Derda 1540 lbs. Steel
construction. Dust
collection hoods
Derda 5000 lbs. Steel
construction. Dust
collection hoods, cast iron
Derda Varying weights depending
on model. Dust collection
hoods. Steel construction.
Hopper feed standard.
Varying models saw,
mould, bore, relish, dado,
inject glue, insert dowels
Derlegno Models 3000-12000 Steel & cast iron
Fletcher Machine Co.,
4305 E. US Hwy 64,
Lexington, NC 27292
Tel. 800/438/1054
FAX 336/249-6890
Fletcher FM-220 25,000 lbs
cast iron & steel
IMA America Corp.,
P.O. Box 90068,
Raleigh, NC 27675
Tel. 919/484-3130
FAX 919/484-2161
Torwegge H 602 Series 15-20,000 lbs, Machine
bed melded steel.
Anti-noise enclosures and
central dust extraction
(2 x 10" pipes)
recommended.
Torwegge H 603 Series 17,000-22,000 lbs. Machine
bed welded steel. Antinoise
enclosures and
central dust extraction
(2 x 10" pipes)
recommended
Torwegge H 604 Series 18,000-26,000 lbs. Flat
guidances welded steel.
Anti noise enclosures and
central dust extraction
(4 x 10" pipes)
recommended
Torwegge H 605 Series 24,000-30,000 lbs. Flat
guidances weidod steel,
Anti noise enclosures and
central dust extraction
(4 x 10" pipes)
recommended
Torwegge H 606 Series 27,000-30,000 lbs. Flat
guidances welded steel.
Anti noise enclosures and
centarl dust extraction
(4 x 10" pipes)
recommended
IMA FBA/11 Base steel
Floor space for
MANUFACTURER 8 ft. machine
Model Loading space
Richard T. Byrnes Co. Inc.,
600 Hannum Ave.,
West Chester, PA 19382
Tel. 610/692-2770
FAX 610/696-0330
Bacci TSD
DMG - Delmac Machinery Group,
4322 Piedmont Parkway,
Greensboro, NC 27410
Tel. 336/854-1211
FAX 336/854-0811
St 3m x 3.5m
Gabbiani-GDG Depends en model: min.:
mod. SV 4600 x 4000 mm (working
width 1600 mm)
max: 7400 x 6500 mm
(working width 4100 mm)
Gabbiani-Monoflex Depends on model: min.:
2200 x 4000 mm (working
width 1600 mm)
Danckaert Woodworking Machinery
Co.,
891 Howell Mill Road N.W.,
Atlanta, GA 30318
Tel. 404/873-6477
CELASCHI
TSA N-D-DS Series Variable
TSA C Variable
TSA DBP Variable
PA Double Variable
Sided Profiler
Progress Double Track Variable
Single Sided Tenoner
Celaschimatic Combination Variable
Machine
Squaring/Edgebanding
Derda Inc.,
2249 Reum Road,
Niles, MI 49120
Tel. 616/683-6666
FAX 616/683-8337
Derlegno 12'
Model 150 Tenoner
Derlegno 16'
Model 250 Tenener
Derda 8' long, 5' wide
Derda 10' long, 5' wide
Derda 12' long, 6' wide
Derda 16' long and up, 6' wide
and up
Derlegno Models 3000-12000 5 to 15 ft.
Fletcher Machine Co.,
4305 E. US Hwy 64,
Lexington, NC 27292
Tel. 800/438/1054
FAX 336/249-6890
Fletcher FM-220 20' x 14'
IMA America Corp.,
P.O. Box 90068,
Raleigh, NC 27675
Tel. 919/484-3130
FAX 919/484-2161
Torwegge H 602 Series 40" front chain extension,
space requirement approx
290 sq ft related to working
width of 2,600 mm
Torwegge H 603 Series 40" front chain extension,
space requirement approx
330 sq ft related to working
width of 2,600mm
Torwegge H 604 Series 40" front chain extension,
space requirement approx
360 sq ft related to working
width of 2,600mm
Torwegge H 605 Series 40" front chain extension,
space requirement approx
380 sq ft related to working
width et 2,600mm
Torwegge H 606 Series 40" fornt chain extension,
space requirement approx
410 sq ft related to working
width of 2,600mm
IMA FBA/11
MANUFACTURER Feed rates
Model Drive
Richard T. Byrnes Co. Inc.,
600 Hannum Ave.,
West Chester, PA 19382
Tel. 610/692-2770
FAX 610/696-0330
Bacci TSD
DMG - Delmac Machinery Group,
4322 Piedmont Parkway,
Greensboro, NC 27410
Tel. 336/854-1211
FAX 336/854-0811
St Variable-
standard is 16-118 fpm
Gabbiani-GDG Variable-
mod. SV standard is 16-118 fpm
Gabbiani-Monoflex Variable-
standard is 16-118 fpm
Danckaert Woodworking Machinery
Co.,
891 Howell Mill Road N.W.,
Atlanta, GA 30318
Tel. 404/873-6477
CELASCHI
TSA N-D-DS Series Standard 9-64" optional
to 180'/min.
TSA C Same
TSA DBP Same
PA Double Same
Sided Profiler
Progress Double Track Same
Single Sided Tenoner
Celaschimatic Combination Same
Machine
Squaring/Edgebanding
Derda Inc.,
2249 Reum Road,
Niles, MI 49120
Tel. 616/683-6666
FAX 616/683-8337
Derlegno 8/12/16/26 m/min.
Model 150 Tenoner
Derlegno 8/12/16/26 m/min.
Model 250 Tenener
Derda Variable speeds with 4 hp
motors
Derda Variable speeds with 3 to
10 hp motors
Derda Variable speods with 3 to
10 hp motors
Derda Varieble speeds with 3 to
10 by motors
Derlegno Models 3000-12000 Variable 0-70 ft./min
Fletcher Machine Co.,
4305 E. US Hwy 64,
Lexington, NC 27292
Tel. 800/438/1054
FAX 336/249-6890
Fletcher FM-220 0-150 fpm
AC variable
IMA America Corp.,
P.O. Box 90068,
Raleigh, NC 27675
Tel. 919/484-3130
FAX 919/484-2161
Torwegge H 602 Series Standard: 8-40 m/min,
infinitely variable; other
feed speeds are possible
Optional: feed speed
adjustable at control panel
Torwegge H 603 Series Standard: 8-40 m/min,
infinitely variable; other
teed speeds are possible
Optional: feed speed
adjustable at control panel
Torwegge H 604 Series Standard: 9-45 m/min,
infinitely variable; other
feed speeds are possible
Optional: feed speed
adjustable at control panel
Torwegge H 605 Series Standard: 9-45 m/min,
infintely variable; other
feed speeds are possible
Optional: feed speed
adjustable at control panel
Torwegge H 606 Series Standard: 7.6-38 m/min,
infinitely variable: other
feed speeds are possible
Optional: teed speed
adjustable at control panel
IMA FBA/11
Traverse; traverse
MANUFACTURER adjustment
Model Stock capacities
Richard T. Byrnes Co. Inc.,
600 Hannum Ave.,
West Chester, PA 19382
Tel. 610/692-2770
FAX 610/696-0330
Bacci TSD
DMG - Delmac Machinery Group,
4322 Piedmont Parkway,
Greensboro, NC 27410
Tel. 336/854-1211
FAX 336/854-0811
St By ballscrew 2.5m/min.
(10m/min opt) on linear
square rails
Gabbiani-GDG Two speed motor. NC
mod. SV optional
[+ or -]0.1 MM accuracy.
Gabbiani-Monoflex Single or double side
CNC shaping w/ counter
rotating heads
Danckaert Woodworking Machinery
Co.,
891 Howell Mill Road N.W.,
Atlanta, GA 30318
Tel. 404/873-6477
CELASCHI
TSA N-D-DS Series Flexible manual, digital
electronic computerized
Max. adj. speed 66'/min.
TSA C Same
TSA DBP Same
PA Double Same
Sided Profiler
Progress Double Track Same
Single Sided Tenoner
Celaschimatic Combination Same
Machine
Squaring/Edgebanding
Derda Inc.,
2249 Reum Road,
Niles, MI 49120
Tel. 616/683-6666
FAX 616/683-8337
Derlegno Min. 10-1/2"; max. 63"
Model 150 Tenoner wide Min. 3/8", max.
3.125" thickness
Derlegno Min. 10-1/2"; max. 98.6"
Model 250 Tenener wide Min. 3/8", max.
3.125" thickness
Derda Manuel drive. Working
lengths from 10" to 52".
(Longer on request)
Derda Screw drive working
lengths frem 4" to 60".
(Longer on request)
Derda Screw drive working
lengths from 4" to 60".
(Longer on request)
Derda Screw drive working
lengths from 9" to 60".
(Longer on request)
Derlegno Models 3000-12000 6" to 120" screw
Fletcher Machine Co.,
4305 E. US Hwy 64,
Lexington, NC 27292
Tel. 800/438/1054
FAX 336/249-6890
Fletcher FM-220 CNC available
Motorized twin screw
IMA America Corp.,
P.O. Box 90068,
Raleigh, NC 27675
Tel. 919/484-3130
FAX 919/484-2161
Torwegge H 602 Series Motorized: Optinoal electrenic
width adjustment with optical
indication at control panel
Torwegge H 603 Series Motoritzed; Optional electronic
width adjustment
with optical indication at
control panel Width
capacities from 1,000mm-
3,500mm, more optional
Torwegge H 604 Series Motorized; Optional electronic
width adjustment
with optical indication at
control panel Width
capacities from 1,000mm
3,500mm, more optiooal
Torwegge H 605 Series Motorized Optional electronic
width adjustment
with eptical indication at
control panel Width
capacities from 1,000mm
3,500mm, more optional
Torwegge H 606 Series Motorized; Optional alectronic
width adjustment
with optical indication at
control panel Width
capacities from 1,000mm
3,500mm more optional
IMA FBA/11 Motorized with digital
readout
MANUFACTURER Posts-stations
Model (each side)
Richard T. Byrnes Co. Inc.,
600 Hannum Ave.,
West Chester, PA 19382
Tel. 610/692-2770
FAX 610/696-0330
Bacci TSD
DMG - Delmac Machinery Group,
4322 Piedmont Parkway,
Greensboro, NC 27410
Tel. 336/854-1211
FAX 336/854-0811
St 1 to 3
Gabbiani-GDG 3 to 12
mod. SV
Gabbiani-Monoflex 2 to 4
Danckaert Woodworking Machinery
Co.,
891 Howell Mill Road N.W.,
Atlanta, GA 30318
Tel. 404/873-6477
CELASCHI
TSA N-D-DS Series One plus 2 halfposts
TSA C Two and 1 half max.
TSA DBP 10 posts
PA Double 8 posts
Sided Profiler
Progress Double Track 4-1/2 posts
Single Sided Tenoner
Celaschimatic Combination 3 plus edgebanding
Machine section
Squaring/Edgebanding
Derda Inc.,
2249 Reum Road,
Niles, MI 49120
Tel. 616/683-6666
FAX 616/683-8337
Derlegno 2, 1 fixed 1 movalbe
Model 150 Tenoner
Derlegno 2, 1 fixed 1 movable
Model 250 Tenener
Derda Up to 3 stations
Derda Up to 3 stations
Derda Up to 3 stations
Derda Up to 10 stations
Derlegno Models 3000-12000 1 to 10
Fletcher Machine Co.,
4305 E. US Hwy 64,
Lexington, NC 27292
Tel. 800/438/1054
FAX 336/249-6890
Fletcher FM-220 2 or more
IMA America Corp.,
P.O. Box 90068,
Raleigh, NC 27675
Tel. 919/484-3130
FAX 919/484-2161
Torwegge H 602 Series Standard: 3 stations,
more possible
Torwegge H 603 Series Standard: 4 stations,
more possible
Torwegge H 604 Series Standard: 5 stations,
more possible
Torwegge H 605 Series Standard: 6 stations,
more possible
Torwegge H 606 Series Standard: 7 stations,
more possible
IMA FBA/11 Standard 3, more if
needed
Chains; bushings
MANUFACTURER tracks
Model Feed dogs
Richard T. Byrnes Co. Inc.,
600 Hannum Ave.,
West Chester, PA 19382
Tel. 610/692-2770
FAX 610/696-0330
Bacci TSD
DMG - Delmac Machinery Group,
4322 Piedmont Parkway,
Greensboro, NC 27410
Tel. 336/854-1211
FAX 336/854-0811
St Each 4th link. NC option
400 mm spacing. High
accuracy chains w/needle
bearings and joining link.
[+ or -] 0.1mm sizing & squaring
Gabbiani-GDG Each 4th link. Option NC.
mod. SV 400 mm spacing. High
accaracy chains w/needle
bearings and joining link.
[+ or -] 0.1mm sizing & squaring
Gabbiani-Monoflex Each 4th link. Option NC.
400 mm spacing. High
accuracy chains w/needle
bearings and joining link.
[+ or -] 0.01mm sizing & squaring
Danckaert Woodworking Machinery
Co.,
891 Howell Mill Road N.W.,
Atlanta, GA 30318
Tel. 404/873-6477
CELASCHI
TSA N-D-DS Series Manual & automatic teed
dogs. One piece heavy
steel links
TSA C Same
TSA DBP Same
PA Double Same
Sided Profiler
Progress Double Track Same
Single Sided Tenoner
Celaschimatic Combination Same
Machine
Squaring/Edgebanding
Derda Inc.,
2249 Reum Road,
Niles, MI 49120
Tel. 616/683-6666
FAX 616/683-8337
Derlegno Steel chain w/roller
Model 150 Tenoner bearings
Derlegno Steel chain w/roller
Model 250 Tenener bearings
Derda Hydraulic cam feed
Derda Hydraulic cam feed
Derda Hydraulic cam feed
Derda Hydraulic cam feed
Derlegno Models 3000-12000 Roller beering, pop-up dogs
Fletcher Machine Co.,
4305 E. US Hwy 64,
Lexington, NC 27292
Tel. 800/438/1054
FAX 336/249-6890
Fletcher FM-220 5" pitch, high tensile
steel precision bushings
or bearings, UHMW track
various dogs incl. track
various dogs incl. automatic
matic spacing
IMA America Corp.,
P.O. Box 90068,
Raleigh, NC 27675
Tel. 919/484-3130
FAX 919/484-2161
Torwegge H 602 Series High precision feed chains
Chain tracks with automatic
chain lubric'n. Dogs available
in every 9th or 3rd link.
Optional: chain dog control
with counting system
Torwegge H 603 Series High precision feed chains
Chain tracks with automatic
chain lubric'n. Dogs available
in every 9th or 3rd link
Optional: choir dog control
with counting system
Torwegge H 604 Series High precision feed chains
Choir trecks milk automatic
chain lubrien. Dogs available
in every 9th or 3rd link.
Optional: chain dog control
with counting system
Torwegge H 605 Series High precision feed chains
Chain tracks with automatic
chain labric'n. Dogs available
in every 9th or 3rd link.
Optional: chain dog control
with counting sustem
Torwegge H 606 Series High precision feed chains
Chain tracks with automatic
chain lubric'n. Dogs available
in every 9th or 3rd link.
Optional: chain dog control
with counting system
IMA FBA/11 High precision roller
chains with dogs
MANUFACTURER
Model Holddowns
Richard T. Byrnes Co. Inc.,
600 Hannum Ave.,
West Chester, PA 19382
Tel. 610/692-2770
FAX 610/696-0330
Bacci TSD
DMG - Delmac Machinery Group,
4322 Piedmont Parkway,
Greensboro, NC 27410
Tel. 336/854-1211
FAX 336/854-0811
St Top driven pressure belts
or idle rollers.
Gabbiani-GDG Top pressure belts or
mod. SV rollers depending on 1st
or 2nd machine in line.
Driven
Gabbiani-Monoflex Top pressure belts or
rollers depending on 1st
or 2nd machine in line.
Driven
Danckaert Woodworking Machinery
Co.,
891 Howell Mill Road N.W.,
Atlanta, GA 30318
Tel. 404/873-6477
CELASCHI
TSA N-D-DS Series Standard rubber belt.
TSA C Standard rubber belt.
TSA DBP Standard rubber belt.
PA Double Standard rubber belt.
Sided Profiler
Progress Double Track Standard rubber belt.
Single Sided Tenoner
Celaschimatic Combination Standard rubber belt.
Machine
Squaring/Edgebanding
Derda Inc.,
2249 Reum Road,
Niles, MI 49120
Tel. 616/683-6666
FAX 616/683-8337
Derlegno Pop-up dogs
Model 150 Tenoner
Derlegno Pop-up dogs
Model 250 Tenener
Derda Endless rubber belt
Derda Endless rubber belt
Derda Endless rubber belt
Derda Endless rubber belt
Derlegno Models 3000-12000 Belt or wheels
Fletcher Machine Co.,
4305 E. US Hwy 64,
Lexington, NC 27292
Tel. 800/438/1054
FAX 336/249-6890
Fletcher FM-220 Ball bearing chain with
urethane pads
IMA America Corp.,
P.O. Box 90068,
Raleigh, NC 27675
Tel. 919/484-3130
FAX 919/484-2161
Torwegge H 602 Series Maintenance-free top
track with double-row
ball bearings. Driven
upper pressure belts.
Torwegge H 603 Series Maintenance-free top
track with double-row
ball bearings. Driven
upper pressure belts.
Torwegge H 604 Series Maintenance-free top
track with double-row
ball bearings. Driven
upper pressure belts.
Torwegge H 605 Series Maintenance-free top
track with double-row
ball bearings. Driven
upper pressure belts.
Torwegge H 606 Series Maintenance-free top
track with double-row
ball bearings. Driven
upper pressure belts.
IMA FBA/11 Top pressure belts,
motorized
Koch Ltd. Machinery + Systems,
300 Lake Ridge Dr., S.E.,
Smyrna, GA 30082-5246
Tel. 678/444-5000
FAX 678/444-5100
Koch SBD sawing, boring 10,000-20,000 lbs., welded
& dowel drilling machine mono frame construction
w/ linear guide system,
equipped W/ dust extraction
system
TRIM-PRO double end Approx. 7700 lbs.
tenoner
Pade T 90 6200
round end tenoner Steel base & cast iron
Pade T90 CLP 6600 # steel base and cast
iron slides
Pade T90 NC-11 7300 # steel base and cast
iron slides
Pade Prima CNC 8400 # steel base and cast
iron slides
Kohler General Corp., Jenkins Div.,
100 Clark St.,
Sheboygan Falls, WI 53085
Tel. 920/467-4674
FAX 920/467-3944
#140 Series 8,000-30,000 #
Combination weldment &
cast bases. Cover plate
over base. Replaceable
wear sleeves. Solid
ground steel 4 in, round
traverse ralls well above
floor. Dust manifold sizes
8 to 24 in. dia. Overhead
wiring standard.
SPDE Series 12,000 lbs
Combination weld &
cast bases.
DPDE Series 14,000 lbs
Combination weld &
cast bases.
Impact 2100 Series 22,000 lbs
Welded steel bate w/linear
ways to assure accuracy.
Sound enclosure opt.
Integrator Single End 6,600 lbs
Tenoner 3100 Series Combination weld &
cast bases.
#120 Series 10,000-35,000 welded
1200 Series base. Replaceable wear
plates between traversing
saddles and base rails,
Dust manifold 8" - 16" dia.
Overhead wiring standard.
Lobo Machinery Corp.,
9034 Bermudez St.,
Pico Rivera, CA 90660
Tel. 562/949-3747
FAX 562/948-4171
Lobo SET-86DET 9800
SET-810NU 16500
Mereen-Johnson Machine Co.,
N. 4401 Lyndale Ave.,
Minneapolis, MN 55412
Tel. 612/529-7791
FAX 612/529-0120
#600 10-55,000 lbs. Base:
#400 welded steel; 2,3,4-rail
bases; 24" length capacity.
L.H., R.H. and both
chain beams adj. to cus-
tomer requirements; re-
placeable wear strips on
adj. chain beams. Dust
hoods, talescoping mani-
folds and sound/dust en-
closures with refuse feed-
out belts available.
2000 Series 10000-20,000 lbs.
welded base, left band
adjustable chain beam,
traverses en THK type
lineal rails and reciprocal
bearings. Optional sound/
dust enclosure available.
Midwest Automation,
2645 26 Ave. S.,
Minneapolis, MN 55406
Tel. 612/721-5347
FAX 612/721-1736
CF1510 7,000 lbs
CF1510-2 8,600 lbs
Koch Ltd. Machinery + Systems,
300 Lake Ridge Dr., S.E.,
Smyrna, GA 30082-5246
Tel. 678/444-5000
FAX 678/444-5100
Koch SBD sawing, boring
& dowel drilling machine
TRIM-PRO double end Floor space approx.
tenoner 13' x 7'
Pade T 90 15' x 5'
round end tenoner
Pade T90 CLP 15' x 6'
Pade T90 NC-11 15' x 6' plus 3' x 3'
Pade Prima CNC 15' x 6' plus 3' x 3'
Kohler General Corp., Jenkins Div.,
100 Clark St.,
Sheboygan Falls, WI 53085
Tel. 920/467-4674
FAX 920/467-3944
#140 Series 8 ft. traverse x 4 ft. load-
ing area 146 model
approximately
14 ft. wide x 19 ft. long.
Other models proportion-
ately larger or smaller.
Opt. traverse to 12 ft.,
infeed area to 96 in.
SPDE Series 8 ft. traverse x 42 in. load-
ing area. Approximately
17 ft wide x 15 ft long
DPDE Series 8 ft. traverse x 42 in. load-
ing area. Approximately
17 ft wide x 21.5 ft long
Impact 2100 Series 8 ft. traverse x 48 in. load-
ing area. Approximately
17.5 ft wide x 19 ft deep
Opt. 60" to 144" traverse,
24" to 72" intend. Floor
space changes proportion-
ately
Integrator Single End 16 ft. long x 4 ft wide
Tenoner 3100 Series 15 in. infeed
#120 Series 13' wide x approx. 22'
1200 Series long, avail. op tu 18' wide.
Lobo Machinery Corp.,
9034 Bermudez St.,
Pico Rivera, CA 90660
Tel. 562/949-3747
FAX 562/948-4171
Lobo SET-86DET 8 ft
SET-810NU 8 ft
Mereen-Johnson Machine Co.,
N. 4401 Lyndale Ave.,
Minneapolis, MN 55412
Tel. 612/529-7791
FAX 612/529-0120
#600 With all stations plus
#400 dade (#600): 17 ft. infeed
to outfeed x 18 ft. 8. in.
wide.
Loading space: 0 to lOb,
or customer spec. for
friction feed.
12 in. to customer spec.
for furniture.
With all stations plus
jump dade (#400): 19 ft.
2-1/4 in. infeed to outfeed
x 21 ft. wide.
2000 Series 14' wide x 18' long
Midwest Automation,
2645 26 Ave. S.,
Minneapolis, MN 55406
Tel. 612/721-5347
FAX 612/721-1736
CF1510 Approx. 128 sq. ft.
Maximum 48" loading
space
CF1510-2 Approv. 165 sq. ft.
Max. 48" loading space
Koch Ltd. Machinery + Systems,
300 Lake Ridge Dr., S.E.,
Smyrna, GA 30082-5246
Tel. 678/444-5000
FAX 678/444-5100
Koch SBD sawing, boring Intermittent feed; stops in
& dowel drilling machine each workstation
TRIM-PRO double end 20 parts per minute
tenoner
Pade T 90 N/A
round end tenoner
Pade T90 CLP 10 parts per minute
Pade T90 NC-11 10 parts per minute
Pade Prima CNC 20 parts per minute
Kohler General Corp., Jenkins Div.,
100 Clark St.,
Sheboygan Falls, WI 53085
Tel. 920/467-4674
FAX 920/467-3944
#140 Series Std. 3 hp; for 141, 142,
143.5 hp for 144, 145,
146, 18-100 fpm infinitely
variable w/brake. Options
are other hp & speeds,
hydraulic, DC, and clutch.
SPDE Series Std. 3 hp mansal steed
adjustment from 15 to 68
fpm with magsntic brakes
DPDE Series Std. 5 hp manual speed
adjustment from 15 to 68
fpm with magnetic brakes
Impact 2100 Series
Integrator Single End Std. 2 hp manual variable
Tenoner 3100 Series speed adjustment.
Std. 10 to 60 fpm
#120 Series 5 hp AC motor w/electric
1200 Series brake, Feed speed 16-48
fpm, or similar 3:1 ratio
Lobo Machinery Corp.,
9034 Bermudez St.,
Pico Rivera, CA 90660
Tel. 562/949-3747
FAX 562/948-4171
Lobo SET-86DET 20 - 60 Var.
SET-810NU 20 - 60 Var.
Mereen-Johnson Machine Co.,
N. 4401 Lyndale Ave.,
Minneapolis, MN 55412
Tel. 612/529-7791
FAX 612/529-0120
#600 Standard: Mereen-Johnson
#400 drive with gear box. 3:1
speed ratio, 15-45 to 75-
220 fpm. Opt: commercial
units to 10:1 ratios, 250
fpm. Opt: hydraulic drive,
0-200 fpm., infinitely vari-
able. Opt.: electrical drive
with brake and clutch for
start-stop cycling. El. and
hyd. drives can be remote
controlled trom operator's
console with speed read-
out. Opt: integrating single
unit drive for 2-pass system.
Opt: Feed speed con-
trolled by CNC integration
2000 Series 3-5 by AC motor
w/safety electric brake,
speeds 15-200 fpm,
per application
Midwest Automation,
2645 26 Ave. S.,
Minneapolis, MN 55406
Tel. 612/721-5347
FAX 612/721-1736
CF1510 18-90 fpm, 3 hp
CF1510-2 18-90 fpm
Koch Ltd. Machinery + Systems,
300 Lake Ridge Dr., S.E.,
Smyrna, GA 30082-5246
Tel. 678/444-5000
FAX 678/444-5100
Koch SBD sawing, boring Length, width or thickness
& dowel drilling machine as required. Motorized
traversa with digital
positioning; electronic
positioning available
Up to 30 parts
TRIM-PRO double end
tenoner
Pade T 90 Hard and ground ways
round end tenoner motorized open & closing
Pade T90 CLP motorized screw; min 6-1/4"
max 96" tenon width 3-1/8"
+ stock thickness
Pade T90 NC-11 NC ballscrew; min 6-1/4"
max 98"; tenon width 3-1/8"
+ stock thickness
Pade Prima CNC full 5-axis CNC movement
on each end; parts 98" long
square & round tenons
Kohler General Corp., Jenkins Div.,
100 Clark St.,
Sheboygan Falls, WI 53085
Tel. 920/467-4674
FAX 920/467-3944
#140 Series Precision twin screws.
Faster, two side center
traverse standard, allows
fixed center splitter.
Portable traverse contrals
standard, 4-5/8 in. min.
std. across chains.
Opt. is RH or LH single
traverse or manual
adjustmest.
SPDE Series 98 in. traverse width across
chains. Single screw moving
RH saddle on machised
dovetail ways. 4 3/4 in. min
STD across chains.
Mechanical counter readout
STD. Autotraverse optional
DPDE Series 98 in. traverse width across
chains. Single screw moving
RH saddle on machined
dovetail ways. 4 3/4 in.
min. STD across chains.
Mechanical counter readout
STD. Autotraverso optional
Impact 2100 Series 60" to 144" RH traverse.
4 3/4" min. dimension
across chains. Double
screw traverse at 6" per
second for last setups.
Integrator Single End Manual adjustable infeed
Tenoner 3100 Series fence
#120 Series Precision twin screws, RH
1200 Series side standard. Portable
traverse controls standard.
Min, seacerce opening
4-3/8" across chain.
Lobo Machinery Corp.,
9034 Bermudez St.,
Pico Rivera, CA 90660
Tel. 562/949-3747
FAX 562/948-4171
Lobo SET-86DET 24" W, 96" L
SET-810NU 8" W, 96" L
Mereen-Johnson Machine Co.,
N. 4401 Lyndale Ave.,
Minneapolis, MN 55412
Tel. 612/529-7791
FAX 612/529-0120
#600 Digital counter with
#400 double adjusting screw,
1 hp TEFC gear motor
traverse. Opt: 1/64"
reference, remote posi-
tioning on console. Push-
button manual data input
or CNC control. Traverse
LH standard RH or LH and
RH optional. Stock capa-
city: to 10" thick: 3-1/4"
to 24" wide, 8" standard
throat clearance opt. 24"
throat clearance.
2000 Series Traverse through double
lead screw adjust, left
hand adjustable chain
beam. Min. traverse 4"
to outside of chain.
Midwest Automation,
2645 26 Ave. S.,
Minneapolis, MN 55406
Tel. 612/721-5347
FAX 612/721-1736
CF1510 96"
CF1510-2 96"
Koch Ltd. Machinery + Systems,
300 Lake Ridge Dr., S.E.,
Smyrna, GA 30082-5246
Tel. 678/444-5000
FAX 678/444-5100
Koch SBD sawing, boring 3 stations, more
& dowel drilling machine possible. Optional shaping
vertical boring & edge
boring stations.
TRIM-PRO double end 2 stations atandard
tenoner
Pade T 90 Single post,
round end tenoner doable sided
Pade T90 CLP profile and score
Pade T90 NC-11 profile and score
Pade Prima CNC profile and score
Kohler General Corp., Jenkins Div.,
100 Clark St.,
Sheboygan Falls, WI 53085
Tel. 920/467-4674
FAX 920/467-3944
#140 Series 141 = 1 sta. ea. side
142 = 2 sta. na. side
143 = 3 sta. ea. side
144 = 4 sta. ea. side
145 = 5 sta. ea. side
146 = 6 sta. ea. side
Dado(s) may be mounted
over top of any station in
addition. All cutter adj.
have English/metric
scales.
SPDE Series One double faced tool
post per side. Mechanical
counter for position
reference of horiz, and
vert. axis
DPDE Series Two double faced tool
post per side. Mechanical
counter for position
reference of horiz. and
vert. axis
Impact 2100 Series Two double faced tool
post per side. Operator's
touch screen can set
60 axis while traversing.
Std. "Oilite" bushings
double teeth sprocket.
PC interface hook up to an
offline APGEN.
Integrator Single End Two double faced tool
Tenoner 3100 Series post on RH side.
#120 Series 121-1 sta. ea. side
1200 Series 122-2 sta. ea. side
123-3 sta. ea. side
All cutter adjustments
have English/metric
scales. 1201-1206
1-6 sta. ea. side
Lobo Machinery Corp.,
9034 Bermudez St.,
Pico Rivera, CA 90660
Tel. 562/949-3747
FAX 562/948-4171
Lobo SET-86DET 2 posts, 3 stations
SET-810NU 2 posts, 5 statiens
Mereen-Johnson Machine Co.,
N. 4401 Lyndale Ave.,
Minneapolis, MN 55412
Tel. 612/529-7791
FAX 612/529-0120
#600 1-8 stations: 1-3
#400 columns; box frame
extensions in and out.
2-rail and 3-rail floor
mounted structural steel
base. Overhead dado
beam with individual
jump router assemblies.
2000 Series 2020 = 2 sta. per side
2030 = 3 sta. per side
2040 = 4 sta. per side
2050 = 5 sta. per side
Midwest Automation,
2645 26 Ave. S.,
Minneapolis, MN 55406
Tel. 612/721-5347
FAX 612/721-1736
CF1510 2 each side
CF1510-2 3 each side
Koch Ltd. Machinery + Systems,
300 Lake Ridge Dr., S.E.,
Smyrna, GA 30082-5246
Tel. 678/444-5000
FAX 678/444-5100
Koch SBD sawing, boring Chain & stop system
& dowel drilling machine
TRIM-PRO double end Posh-feed system in
tenoner conjunction with hopper
Pade T 90 Automatic hopper teed
round end tenoner
Pade T90 CLP hopper fed with return
conveyor
Pade T90 NC-11 hopper fed with return
conveyor
Pade Prima CNC hopper fed with return
conveyor
Kohler General Corp., Jenkins Div.,
100 Clark St.,
Sheboygan Falls, WI 53085
Tel. 920/467-4674
FAX 920/467-3944
#140 Series 4 in. pitch hardened pre-
cision chain with replace-
ment V-track wear insert
on each pitch, "Oilite"
bushings, doule-tooth
sprockets, chain raking,
bronze track keyed to
solid alum, dogs, keyed to
links 16 in. c/c single screw.
SPDE Series 4 in, pitch hardened pre-
cision chain with replace-
ment V-track wear insert
an each itch, with uuto.
oilers. "Oilite" bushings,
chain raking, double
tooth sprocket,
dogs keyed to
links 16 in. c/c.
DPDE Series 4 in. pitch hardened pro-
cision chain with replace-
meet V-track wear insert
on each pitch, with auto.
oilers. "Oilite" bushings,
chain raking, double
tooth sprocket,
dogs keyed to
links 16 in. c/c.
Impact 2100 Series 4 in. pitch hardened pre-
cision chain with replace-
able V-track wear insert
on each pitch, with auto.
oilers. "Oilite" bushings,
chain raking, double
tooth sprocket,
dogs keyed so
links 16 in. c/c.
Integrator Single End Cast links w/guiding
Tenoner 3100 Series friction plates
#120 Series 4" pitch hardened chain,
1200 Series w/replaceable V-track
wear inserts. Precision
pins and bronse bushings.
Dog spacing in 8" incre-
ments. Quick-change or
ceecial docs.
Lobo Machinery Corp.,
9034 Bermudez St.,
Pico Rivera, CA 90660
Tel. 562/949-3747
FAX 562/948-4171
Lobo SET-86DET Solid steel feed dogs
SET-810NU Solid steel feed dogs,
cast iron chain links
Mereen-Johnson Machine Co.,
N. 4401 Lyndale Ave.,
Minneapolis, MN 55412
Tel. 612/529-7791
FAX 612/529-0120
#600 6-1/2 in. pitch, smooth or
#400 corrugated face. Rubber in-
serts, 5 to 250 fpm speed
range. Opt: full face pads.
5-tooth drive sprocket,
5-in. pitch takes 6 or 8
tooth sprocket.
Track: (#600) double-V
HMP: (#400) multi-V.
Hard, center-less ground
pin. Oilite bushings.
Dogs: snap-in, pop up,
straight top, 1/4 to 2-1/2 in.
high. Opt: offset, core ref-
erence extended; snap-in,
bolt-on combo; clamp
Track opt.: "moly-coated"
hardened steel: graphite
impregnated ind. laminate.
2000 Series 5" pitch smooth,
corrugated or rubber
faced padded chain, feed
lug lengths on 5" centers.
Exclusive Multi-VEE
chain and chainway
designs, chainways of
crosslinked UHMW.
Midwest Automation,
2645 26 Ave. S.,
Minneapolis, MN 55406
Tel. 612/721-5347
FAX 612/721-1736
CF1510 Cast iron chain links,
hardened steel pins,
high fricton, full face pads
pop-up dogs
CF1510-2 Same as above
Koch Ltd. Machinery + Systems,
300 Lake Ridge Dr., S.E.,
Smyrna, GA 30082-5246
Tel. 678/444-5000
FAX 678/444-5100
Koch SBD sawing, boring Clamping cylinders
& dowel drilling machine
TRIM-PRO double end Top pressure belts
tenoner
Pade T 90 Clamping cylinder
round end tenoner
Pade T90 CLP pneumatic clamping bar from
above
Pade T90 NC-11 pneumatic clamping bar from
above
Pade Prima CNC high pressure pneumatic
clamping bar frow above
Kohler General Corp., Jenkins Div.,
100 Clark St.,
Sheboygan Falls, WI 53085
Tel. 920/467-4674
FAX 920/467-3944
#140 Series Cast iron chains with poly-
urethone blocks. Bronze
tracks with replaceable wear
strips. Squaring holdbacks,
safety switches on lead-in.
Vertical adj. scales Eng-
lish/metric. Opt: Wheel or
belt types. Drives hold-
down. Power vert. adj.
Offset adj. Offset beams.
Interlocking blocks. All
nip pointe guarded.
SPDE Series Powered adjustable speed.
Traveling belt holddown.
Overthickness safety switches
and stock holdback device.
DPDE Series Powered adjustable speed.
Traveling belt holddown.
Overthickness safety switches
and stock holdbach device.
Impact 2100 Series Chain & rubber block hold-
down. Manual vertical adjust-
ment. Overthickness safety
switches and stock holdback
device.
Integrator Single End Powered adjustable speed.
Tenoner 3100 Series Traveling belt holddown.
Overthickness safety switch.
#120 Series Chain & block holddown
1200 Series Drain rollers on 1" centers
Over-thickness safety
switch and stock
holdback device at infeed
end, Opt. Chain w/rubber
block hold-downs
Lobo Machinery Corp.,
9034 Bermudez St.,
Pico Rivera, CA 90660
Tel. 562/949-3747
FAX 562/948-4171
Lobo SET-86DET Motor belt, variable speed.
SET-810NU Chain and block hold down
Auto thickness adj.
Stock hold back device.
Mereen-Johnson Machine Co.,
N. 4401 Lyndale Ave.,
Minneapolis, MN 55412
Tel. 612/529-7791
FAX 612/529-0120
#600 Interlocking rubber block;
#400 solid or spring or air
loaded single or double
row rollers: 8 in. dia.
rollers are rubber, poly-
urethane, or silicon
coated, pneumatic or
solid tire. Belt with rolls;
solid or spring or air
loaded shoe, hold-downs.
Split and intermediate
available. Height adjust-
ment scale and pointer.
Opt.: digital with hand-
wheel. Gear or DC motor
power adjust. Power adj.
by CNC control.
2000 Series Solid, spring or air-
loaded single at double
row of roller hold-downs.
Height adjustment
through digital position,
power adjust optional.
Midwest Automation,
2645 26 Ave. S.,
Minneapolis, MN 55406
Tel. 612/721-5347
FAX 612/721-1736
CF1510 Driven
CF1510-2 Driven
SCM GROUP USA,
2475-B Satellite Blvd.,
Duluth, GA 30096
Tel. 770/813-8818
FAX 770/813-8819
Concept 2000 Double side Ribbed tubular steel/cast
Concept 1000 Single Side Ribbed tubular steel/cast
Schwabedissen Maschinen
Anlagen GmbH,
P.O. Box 2753, D-32046
Herford, Germany
Tel. +49 (0) 5221/3981
FAX +49 (0) 5221/3985
Modul Depends on model,
Cast iron
Solid Wood Systems Inc.,
3202 E. Kivett Drive,
High Point, NC 27260
Tel. 910/884-0700
Balestrini MIA 4,400 lbs.
Balestrini Vesa 34 6,600 lbs.
Balestrini Nova II 5,830 lbs.
Balestrini MIA/Plus 5,280 lbs.
Stiles Machinery Inc.,
3965 44th St. S.E.,
Grand Rapids, MI 49508
Tel. 616/698-7500
FAX 616/698-9411
HOMAG NFL 21 Welded steel base
centralized dust extraction
HOMAG NFL 26 Variable - dependent
on machine configuration/
size
HOMAG FL 20 Series Variable - dependent
on machine configuration/
size
HOMAG KF Series Variable - dependent
on machine configuration/
size
Tyler Machinery Co.,
616 S. Detroit,
Warsaw, IN 46580
Tel. 219/267-3530
FAX 219/267-2937
Endless belt, woven 5,000-7,000 lbs. Base:
synthetic, welded steel 4 in. dia.
on ultra-HMP track. Side dust collection ports at
guide dovetail mounted to each cutting station.
the post. Roller type hold-
downs optional
Wadkin,
7910 Industrial Village Road,
Greensboro, NC 27409
Tel. 919/665-1907
WT Cast iron
SCM GROUP USA,
2475-B Satellite Blvd.,
Duluth, GA 30096
Tel. 770/813-8818
FAX 770/813-8819
Concept 2000 Double side 97 x 172-1/2
Concept 1000 Single Side 97 x 172-1/2
Schwabedissen Maschinen
Anlagen GmbH,
P.O. Box 2753, D-32046
Herford, Germany
Tel. +49 (0) 5221/3981
FAX +49 (0) 5221/3985
Modul
Solid Wood Systems Inc.,
3202 E. Kivett Drive,
High Point, NC 27260
Tel. 910/884-0700
Balestrini MIA
Balestrini Vesa 34
Balestrini Nova II
Balestrini MIA/Plus
Stiles Machinery Inc.,
3965 44th St. S.E.,
Grand Rapids, MI 49508
Tel. 616/698-7500
FAX 616/698-9411
HOMAG NFL 21 132 in.
HOMAG NFL 26 13 ft. in width. Length
dependent on working
stations
HOMAG FL 20 Series 13 ft. in width. Length
dependent on working
stations
HOMAG KF Series 20 ft. in width. Length
dependent on working
stations
Tyler Machinery Co.,
616 S. Detroit,
Warsaw, IN 46580
Tel. 219/267-3530
FAX 219/267-2937
Endless belt, woven 8 ft. 6-5/8 in. infeed to
synthetic, outfeed x 13 ft. 8-1/2 wide.
on ultra-HMP track. Side Loading space: 22-1/2 in.,
guide dovetail mounted to more, optional.
the post. Roller type hold-
downs optional
Wadkin,
7910 Industrial Village Road,
Greensboro, NC 27409
Tel. 919/665-1907
WT
SCM GROUP USA,
2475-B Satellite Blvd.,
Duluth, GA 30096
Tel. 770/813-8818
FAX 770/813-8819
Concept 2000 Double side 20-140 fpm
Concept 1000 Single Side 20-140 fpm
Schwabedissen Maschinen
Anlagen GmbH,
P.O. Box 2753, D-32046
Herford, Germany
Tel. +49 (0) 5221/3981
FAX +49 (0) 5221/3985
Modul Infinitely variable
up to 500 ft per minute
Solid Wood Systems Inc.,
3202 E. Kivett Drive,
High Point, NC 27260
Tel. 910/884-0700
Balestrini MIA Variable
Balestrini Vesa 34 Variable
Balestrini Nova II Variable
Balestrini MIA/Plus Variable
Stiles Machinery Inc.,
3965 44th St. S.E.,
Grand Rapids, MI 49508
Tel. 616/698-7500
FAX 616/698-9411
HOMAG NFL 21 5 to 25m/min.
HOMAG NFL 26 Infinitely variable from
16 ft to 82 ft per min.
HOMAG FL 20 Series Infinitely variable from
16 ft to 132 ft per min.
Special execution to
200 ft per minute
HOMAG KF Series Infinitely variable from
16 ft to 132 ft per min.
Special execution to
200 ft per minute
Tyler Machinery Co.,
616 S. Detroit,
Warsaw, IN 46580
Tel. 219/267-3530
FAX 219/267-2937
Endless belt, woven Feed drive: 3/4 hp to 80
synthetic, fpm
on ultra-HMP track. Side
guide dovetail mounted to
the post. Roller type hold-
downs optional
Wadkin,
7910 Industrial Village Road,
Greensboro, NC 27409
Tel. 919/665-1907
WT 11-1/2-62 fpm standard,
28-164 fpm optional
SCM GROUP USA,
2475-B Satellite Blvd.,
Duluth, GA 30096
Tel. 770/813-8818
FAX 770/813-8819
Concept 2000 Double side 126" Treated & normal-
ized, precision ground
steel. Opt. high speed AC
brushless ball screw adj.
Concept 1000 Single Side 126" Treated & normal-
ized, precision ground
steel. Opt. high speed AC
brushless ball screw adj.
Schwabedissen Maschinen
Anlagen GmbH,
P.O. Box 2753, D-32046
Herford, Germany
Tel. +49 (0) 5221/3981
FAX +49 (0) 5221/3985
Modul dependent on
customer's req.
Solid Wood Systems Inc.,
3202 E. Kivett Drive,
High Point, NC 27260
Tel. 910/884-0700
Balestrini MIA 78"
Balestrini Vesa 34 78"
Balestrini Nova II 78"
Balestrini MIA/Plus 78"
Stiles Machinery Inc.,
3965 44th St. S.E.,
Grand Rapids, MI 49508
Tel. 616/698-7500
FAX 616/698-9411
HOMAG NFL 21 Motorized w/precision
lead screw and digital
readout
HOMAG NFL 26 Programmable with ball
screw
HOMAG FL 20 Series Motorized using precision
ball screw and readout.
Option for Servo width
opening of 65 ft per min.
HOMAG KF Series Motorized using precision
ball screw and readout.
Option for Servo width
opening of 65 ft per min.
Tyler Machinery Co.,
616 S. Detroit,
Warsaw, IN 46580
Tel. 219/267-3530
FAX 219/267-2937
Endless belt, woven Traverse: manual or -
synthetic, ered with handwheel and
on ultra-HMP track. Side scale to 1/16 in. 6-1/2 to
guide dovetail mounted to 96 in. wide stock capacity,
the post. Roller type hold- to 3 in. thick.
downs optional
Wadkin,
7910 Industrial Village Road,
Greensboro, NC 27409
Tel. 919/665-1907
WT 7" thick, 74" wide
SCM GROUP USA,
2475-B Satellite Blvd.,
Duluth, GA 30096
Tel. 770/813-8818
FAX 770/813-8819
Concept 2000 Double side Up to 8 w/ more than
40 different units.
Auto tool changer
Concept 1000 Single Side Up to 8 w/ more than
40 different units.
Auto tool changer
Schwabedissen Maschinen
Anlagen GmbH,
P.O. Box 2753, D-32046
Herford, Germany
Tel. +49 (0) 5221/3981
FAX +49 (0) 5221/3985
Modul Variable, based on
application
Solid Wood Systems Inc.,
3202 E. Kivett Drive,
High Point, NC 27260
Tel. 910/884-0700
Balestrini MIA 2
Balestrini Vesa 34 3
Balestrini Nova II 2
Balestrini MIA/Plus 3
Stiles Machinery Inc.,
3965 44th St. S.E.,
Grand Rapids, MI 49508
Tel. 616/698-7500
FAX 616/698-9411
HOMAG NFL 21 2
HOMAG NFL 26 2, 3, or 4
HOMAG FL 20 Series Variable, based on
application
HOMAG KF Series Variable, based on
application
Tyler Machinery Co.,
616 S. Detroit,
Warsaw, IN 46580
Tel. 219/267-3530
FAX 219/267-2937
Endless belt, woven 1 post, 3 stations
synthetic,
on ultra-HMP track. Side
guide dovetail mounted to
the post. Roller type hold-
downs optional
Wadkin,
7910 Industrial Village Road,
Greensboro, NC 27409
Tel. 919/665-1907
WT 1 post/5 stations or 2
post/7 stations
SCM GROUP USA,
2475-B Satellite Blvd.,
Duluth, GA 30096
Tel. 770/813-8818
FAX 770/813-8819
Concept 2000 Double side Solid steel feeding track
with dogs, 16" spacing on
dogs. Connecting pivot by
cylindrical bearings. Auto
lubrication of feeding tracks
Chains w/needle bearings
and joining link
Concept 1000 Single Side Solid steel feeding track
with dogs, 16" spacing on
dogs. Connecting pivot by
cylindrical bearings. Auto
lubrication of feeding tracks
Chains w/needle bearings
and joining link
Schwabedissen Maschinen
Anlagen GmbH,
P.O. Box 2753, D-32046
Herford, Germany
Tel. +49 (0) 5221/3981
FAX +49 (0) 5221/3985
Modul Chain with roller bearing
running on prismatic
guides
Solid Wood Systems Inc.,
3202 E. Kivett Drive,
High Point, NC 27260
Tel. 910/884-0700
Balestrini MIA
Balestrini Vesa 34
Balestrini Nova II
Balestrini MIA/Plus
Stiles Machinery Inc.,
3965 44th St. S.E.,
Grand Rapids, MI 49508
Tel. 616/698-7500
FAX 616/698-9411
HOMAG NFL 21 Precision block link
chain dog spacing
at 15-3/4"
HOMAG NFL 26 Precision block link
chain. Dog spacing at
20 in. Other spacing
avail. on request
HOMAG FL 20 Series Precision block link
rolling chain. Dog
spacing at 40 in. Other
spacing on request
HOMAG KF Series Precision block link
rolling chain. Dog
spacing at 40 in. Other
spacing on request
Tyler Machinery Co.,
616 S. Detroit,
Warsaw, IN 46580
Tel. 219/267-3530
FAX 219/267-2937
Endless belt, woven Cast steel links on
synthetic, phite filled phenolic v-
on ultra-HMP track. Side shaped track. 3 in. pitch
guide dovetail mounted to Oil-impregnated bronze
the post. Roller type hold- bushings.
downs optional
Wadkin,
7910 Industrial Village Road,
Greensboro, NC 27409
Tel. 919/665-1907
WT Stainless steel tracks,
interchangeable for
furniture or panel parts
SCM GROUP USA,
2475-B Satellite Blvd.,
Duluth, GA 30096
Tel. 770/813-8818
FAX 770/813-8819
Concept 2000 Double side Double pressure beam
with motorized belt that can
absorb a difference in a level
of 12mm on the same work-
piece. 70mm wide belts
Concept 1000 Single Side Double pressure beam
with motorized belt that can
absorb a difference in a level
of 12mm on the same work-
piece. 70mm wide belts
Schwabedissen Maschinen
Anlagen GmbH,
P.O. Box 2753, D-32046
Herford, Germany
Tel. +49 (0) 5221/3981
FAX +49 (0) 5221/3985
Modul Rubber padded, steel
link chains
Solid Wood Systems Inc.,
3202 E. Kivett Drive,
High Point, NC 27260
Tel. 910/884-0700
Balestrini MIA
Balestrini Vesa 34
Balestrini Nova II
Balestrini MIA/Plus
Stiles Machinery Inc.,
3965 44th St. S.E.,
Grand Rapids, MI 49508
Tel. 616/698-7500
FAX 616/698-9411
HOMAG NFL 21 Driven top pressure belts.
HOMAG NFL 26 Driven top pressure belts
HOMAG FL 20 Series Driven top pressure belts
HOMAG KF Series Driven top pressure belts
Tyler Machinery Co.,
616 S. Detroit,
Warsaw, IN 46580
Tel. 219/267-3530
FAX 219/267-2937
Endless belt, woven Endless belt, woven syn-
synthetic, thetic, on ultra-HMP
on ultra-HMP track. Side track. Side guide dove-
guide dovetail mounted to tail mounted to the post.
the post. Roller type hold- Roller type hold-downs
downs optional optional.
Wadkin,
7910 Industrial Village Road,
Greensboro, NC 27409
Tel. 919/665-1907
WT Caterpillar or vee-belts
Biesse Group America Inc.,
P.O. Box 19849,
Charlotte, NC 28219-9849
Tel. 704/357-3131
FAX 704/357-3130
Comil Cosmo NK1 98.4" x 47.2"
Comil Astro 98.4" x 51.2"
Comil CF/2000 98.4" x 47.2"
Comil Cosmo NK2 98.4" x 47.2"
Comil SEM 78.7" x 23.6"
Handy Machines Div.,
616 S. Detroit St.,
Warsaw, IN 46580
Tel. 219/267-3530
FAX 219/267-2937
Handy Model 630-4 48"x36"x36"
Handy Model 630-6 72"x36"x36"
Handy Model 630-8 96"x36"x36"
Handy 123/124 48"x48"
Econ'd Clamp 48"x49"
Handy 87/960 48"x160"
Heavy Frame Clamps 60"x168"
Hess Group America, Inc.,
P.O. Box 537,
Point Pleasant, NJ 08742
Tel. 800/973-4377 or
732/892-3558
FAX 732/295-3753
Laura 98.4" x 49.2" x 24"
Laura Line 98.4" x 49.2" x 24"
Formatic Auto Line 98.4" x 49.2" x 24"
Italpresse Engineering, SpA,
Via delle Groane,
15--24060 Bagnatica (BG), Italy
Tel. 035/681122
FAX 035/682682
SP/1-A Spec Length: max. 99.2", min. 20.9"
Height: max. 48", min. 9.9"
Width: max. 27.5"/31.5"/39.4"
Electronic/36 Length: max. 118", min. 9.9"
Height: max. 59", min. 9.9"
Width: max. 23.6"
NUOVO-SP Length: max. 98", min. 9.8"
Height: max. 49", min. 11", Width:
23"
PROGRAM/30 Length: max. 36", min. 9.8"
Height: max. 97", min. 66"
ELECTRONIC/312 Length: max. 118", min. 9.8";
Height: max. 98.4", min. 11.8";
Width: 4.7"
Macoser Woodworking Machinery,
P.O. Box 667789,
Charlotte, NC 28266
Tel. 704/392-0110
Caselli Chair -- Early American
Caselli Chair frame
Eric Riebling Co. Inc.,
106 Miller P1.,
Mt. Vernon, NY 10550
Tel. 914/668-4800
FAX 914/668-6438
Ramarch Case Clamps Model PH-16 2640 x 1400 x 600
Ramarch Case Clamps Model PH-20-2 1110 x 1400 x 600
Stations
Ramarch Case Clamps Model PH-28-2 2000 x 1400 x 600
Stations
Ramarch Case Clamps Model PH-31 2500 x 1400 x 600
Ramarch Case Clamps Model HA-25 2050 x 1050 x 600
Ramarch Case Clamps Model HA-35 2200 x 1050 x 600
Ritter Mfg. Inc.,
1300-B W. 4th St.,
Antioch, CA 94509
Tel. 510/757-7296
R-525 50" x 100"
R-525 DE 2 @ 50" x 50" or 1 @ 50" x 100"
Stiles Machinery Inc.,
3965 44th St. S.E.,
Grand Rapids, Ml 49512
Tel. 616/698-7500
Ligmatech 2500 x 1220 mm
MPH 10 depth 600 or 800mm
MPH 21 2500 x 1300mm
depth 600 or 800mm
MPH 30 2500 x 1300mm, depth 600 or 800mm
MPH 40 2500 x 1400mm, depth 600 or 900mm
MPP 05 2500 x 1220mm, depth 600/800 or
1000mm
MPP 10 2500 x 1220mm
depth 600/800 or 1000mm
MPP 15 2300 x 1220mm
depth 600/800 or 1000mm
MPS 20 610, 800, 1000mm wide
MPC 10
MPC 20
MPE 10
Tritec Associates Inc.,
44964-B Underwood Lane,
Sterling, VA 20166
Tel. 703/904-7890
FAX 703/904-7889
Gannomat Model 261 50" x 100"
J.C. Uhling Products,
P.O. Box 445,
Cottonwood, ID 83522
Tel. 208/962-3271
HP 5000 100" x 24" x 50"
HP 3000 55" x 24" x 96"
HP 2000 50" x 24" x 42"
Biesse Group America Inc.,
P.O. Box 19849,
Charlotte, NC 28219-9849
Tel. 704/357-3131
FAX 704/357-3130
Comil Cosmo NK1 []
Comil Astro [] []
Comil CF/2000 [] []
Comil Cosmo NK2 []
Comil SEM []
Handy Machines Div.,
616 S. Detroit St.,
Warsaw, IN 46580
Tel. 219/267-3530
FAX 219/267-2937
Handy Model 630-4 []
Handy Model 630-6 [] same
Handy Model 630-8 [] same
Handy 123/124 [] 5000 main
Econ'd Clamp [] 2500 sec
Handy 87/960 [] 16000 main
Heavy Frame Clamps [] 2500 sec
Hess Group America, Inc.,
P.O. Box 537,
Point Pleasant, NJ 08742
Tel. 800/973-4377 or
732/892-3558
FAX 732/295-3753
Laura [] []
Laura Line [] []
Formatic Auto Line [] []
Italpresse Engineering, SpA,
Via delle Groane,
15--24060 Bagnatica (BG), Italy
Tel. 035/681122
FAX 035/682682
SP/1-A Spec [] V 4,000
Iba. side
3,000 lbs
Electronic/36 [] V & and
side press
7,700 lbs
NUOVO-SP []
PROGRAM/30 [] Vert. thrust
7,000
ELECTRONIC/312 [] 18* bar
Macoser Woodworking Machinery,
P.O. Box 667789,
Charlotte, NC 28266
Tel. 704/392-0110
Caselli [] []
Caselli [] []
Eric Riebling Co. Inc.,
106 Miller P1.,
Mt. Vernon, NY 10550
Tel. 914/668-4800
FAX 914/668-6438
Ramarch Case Clamps Model PH-16 [] []
Ramarch Case Clamps Model PH-20-2 [] []
Stations
Ramarch Case Clamps Model PH-28-2 [] []
Stations
Ramarch Case Clamps Model PH-31 []
Ramarch Case Clamps Model HA-25 [] []
Ramarch Case Clamps Model HA-35 [] []
Ritter Mfg. Inc.,
1300-B W. 4th St.,
Antioch, CA 94509
Tel. 510/757-7296
R-525 []
R-525 DE []
Stiles Machinery Inc.,
3965 44th St. S.E.,
Grand Rapids, Ml 49512
Tel. 616/698-7500
Ligmatech [] []
MPH 10
MPH 21 [] []
MPH 30 []
MPH 40 []
MPH 05 [] []
MPP 10 [] []
MPP 15 [] []
MPS 20 [] []
MPC 10 [] []
MPC 20 [] []
MPE 10 [] []
Tritec Associates Inc.,
44964-B Underwood Lane,
Sterling, VA 20166
Tel. 703/904-7890
FAX 703/904-7889
Gannomat Model 261 [] []
J.C. Uhling Products,
P.O. Box 445,
Cottonwood, ID 83522
Tel. 208/962-3271
HP 5000 [] [] []
HP 3000 [] []
HP 2000 [] []
Biesse Group America Inc.,
P.O. Box 19849,
Charlotte, NC 28219-9849
Tel. 704/357-3131
FAX 704/357-3130
Comil Cosmo NK1 []
Comil Astro
Comil CF/2000
Comil Cosmo NK2 []
Comil SEM []
Handy Machines Div.,
616 S. Detroit St.,
Warsaw, IN 46580
Tel. 219/267-3530
FAX 219/267-2937
Handy Model 630-4
Handy Model 630-6
Handy Model 630-8
Handy 123/124
Econ'd Clamp
Handy 87/960
Heavy Frame Clamps
Hess Group America, Inc.,
P.O. Box 537,
Point Pleasant, NJ 08742
Tel. 800/973-4377 or
732/892-3558
FAX 732/295-3753
Laura
Laura Line
Formatic Auto Line
Italpresse Engineering, SpA,
Via delle Groane,
15--24060 Bagnatica (BG), Italy
Tel. 035/681122
FAX 035/682682
SP/1-A Spec
Electronic/36
NUOVO-SP
PROGRAM/30
ELECTRONIC/312
Macoser Woodworking Machinery,
P.O. Box 667789,
Charlotte, NC 28266
Tel. 704/392-0110
Caselli
Caselli
Eric Riebling Co. Inc.,
106 Miller P1.,
Mt. Vernon, NY 10550
Tel. 914/668-4800
FAX 914/668-6438
Ramarch Case Clamps Model PH-16
Ramarch Case Clamps Model PH-20-2
Stations
Ramarch Case Clamps Model PH-28-2
Stations
Ramarch Case Clamps Model PH-31 []
Ramarch Case Clamps Model HA-25 []
Ramarch Case Clamps Model HA-35 []
Ritter Mfg. Inc.,
1300-B W. 4th St.,
Antioch, CA 94509
Tel. 510/757-7296
R-525 []
R-525 DE []
Stiles Machinery Inc.,
3965 44th St. S.E.,
Grand Rapids, Ml 49512
Tel. 616/698-7500
Ligmatech
MPH 10
MPH 21 []
MPH 30 []
MPH 40 []
MPH 05
MPP 10
MPP 15
MPS 20
MPC 10
MPC 20
MPE 10
Tritec Associates Inc.,
44964-B Underwood Lane,
Sterling, VA 20166
Tel. 703/904-7890
FAX 703/904-7889
Gannomat Model 261
J.C. Uhling Products,
P.O. Box 445,
Cottonwood, ID 83522
Tel. 208/962-3271
HP 5000 []
HP 3000
HP 2000
Biesse Group America Inc.,
P.O. Box 19849,
Charlotte, NC 28219-9849
Tel. 704/357-3131
FAX 704/357-3130
Comil Cosmo NK1 Precision ball screws.
Comil Astro Throughfeed clamp for high
productivity
Comil CF/2000 Throughfeed clamp for high
productivity
Comil Cosmo NK2 Precision ball screws.
Comil SEM Auto., throughfeed, 5-piece door
clamp
available with variety of
fastening solutions.
Handy Machines Div.,
616 S. Detroit St.,
Warsaw, IN 46580
Tel. 219/267-3530
FAX 219/267-2937
Handy Model 630-4 Air pod. Options: secondary
clamping, pow.
traverse, adj. to 8000 lbs.w/ main
jaws.
Handy Model 630-6 See above.
Handy Model 630-8 See above.
Handy 123/124 Power traverse optional 123 - one
way,
Econ'd Clamp 124 - two way.
Handy 87/960 Power traverse optional 970 - one
way,
Heavy Frame Clamps 960 - two way.
Hess Group America, Inc.,
P.O. Box 537,
Point Pleasant, NJ 08742
Tel. 800/973-4377 or
732/892-3558
FAX 732/295-3753
Laura Quick changeover, clamping corner
auto-
matically reposition when changing
opening
size.
Laura Line Push button lead screws for "x/v"
ergonomic
operation, incorporated manual
conveyors
eliminates any lifting.
Formatic Auto Line Automatic sizing via optional
scanning of
parts; Z shaped or U shaped
layouts avail.
Italpresse Engineering, SpA,
Via delle Groane,
15--24060 Bagnatica (BG), Italy
Tel. 035/681122
FAX 035/682682
SP/1-A Spec Electronic control; auto reading
of furn.
sizes double speed of clamp
movement through
feed; fully auto.; fully hydraulic
Electronic/36 Fully hyd.; elect. control; poss.
to process
frames, cabinet, drawers; auto
reading of
furn, size or setting on keyboard
of furn.
NUOVO-SP a) 4 vertical cylinders; bl 4
horizontal
cylinders
PROGRAM/30 a) frame clamp; b) fully
hydraulic; c)
electronic
ELECTRONIC/312 a) frame clamp; b) fully
hydraulic; c)
electronic
Macoser Woodworking Machinery,
P.O. Box 667789,
Charlotte, NC 28266
Tel. 704/392-0110
Caselli
Caselli
Eric Riebling Co. Inc.,
106 Miller P1.,
Mt. Vernon, NY 10550
Tel. 914/668-4800
FAX 914/668-6438
Ramarch Case Clamps Model PH-16 Manual operation
Ramarch Case Clamps Model PH-20-2 Manual operation
Stations
Ramarch Case Clamps Model PH-28-2 Manual operation
Stations
Ramarch Case Clamps Model PH-31 Thru-feed
Ramarch Case Clamps Model HA-25 Thru-feed
Ramarch Case Clamps Model HA-35 Thru-feed
Ritter Mfg. Inc.,
1300-B W. 4th St.,
Antioch, CA 94509
Tel. 510/757-7296
R-525 Semi/auto feed
R-525 DE Semi/auto feed; Double-end
Stiles Machinery Inc.,
3965 44th St. S.E.,
Grand Rapids, Ml 49512
Tel. 616/698-7500
Ligmatech Easy to adjust.
MPH 10
MPH 21 Pressure beams adjust
electronically,
pressure is applied by pneumatic
pads.
MPH 30 Equipped with adjustable pressure
pads.
MPH 40 Does not require pressure pads.
MPH 05 Through feed case clamp.
MPP 10 Through feed clamp; automatically
adjusts to case size.
MPP 15 Through feed clamp; automatically
adjusts to case size.
MPS 20 Self adjusting, through feed
clamp.
MPC 10 For smaller cases; does not
require
preassembly.
MPC 20 CNC controlled; doesn't require
preassembly.
MPE 10 For corner cabinets.
Tritec Associates Inc.,
44964-B Underwood Lane,
Sterling, VA 20166
Tel. 703/904-7890
FAX 703/904-7889
Gannomat Model 261
J.C. Uhling Products,
P.O. Box 445,
Cottonwood, ID 83522
Tel. 208/962-3271
HP 5000 Clamps all case goods incl. custom
req.
HP 3000 Clamps all case goods incl. custom
req.
HP 2000 See above
|
|
||||||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion