Ozone-resistant coating.HPC-5C (clear) and HPC-5B (black) high-performance elastomer elastomer (ĭlăs`təmər), substance having to some extent the elastic properties of natural rubber. The term is sometimes used technically to distinguish synthetic rubbers and rubberlike plastics from natural rubber. coatings were developed to improved upon the oil and ozone resistance of various elastomer materials used in automotive, industrial, marine, off-highway/agriculture, aerospace/aircraft and oil drilling type applications. Although the coatings are said to enable the use of less expensive elastomers, they are said to yield similar fluid and ozone resistance as compared to their more expensive elastomeric counterparts. Combining heat resistance, environmental protection, adhesion adhesion /ad·he·sion/ (ad-he´zhun) 1. the property of remaining in close proximity. 2. the stable joining of parts to one another, which may occur abnormally. 3. to both rubber and metal, as well as the flexibility to withstand dynamic motions, the coatings cure at room temperature and are aesthetically appealing, according to according to prep. 1. As stated or indicated by; on the authority of: according to historians. 2. In keeping with: according to instructions. 3. the manufacturer. Further, they are said to protect a natural rubber substrate The base layer of a structure such as a chip, multichip module (MCM), printed circuit board or disk platter. Silicon is the most widely used substrate for chips. Fiberglass (FR4) is mostly used for printed circuit boards, and ceramic is used for MCMs. from ozone and from moderate exposure to various petroleum oils and fuels, improve ozone resistance, etc. Lord Circle 62 on card |
|
||||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion