Optiwave Corporation Announces Release of OptiSystem 2.1.Business Editors/High-Tech Writers OTTAWA--(BUSINESS WIRE)--June 12, 2002 Optiwave Corporation, a world leader in the development of optical simulation software Simulation software is based on the process of imitating a real phenomenon with a set of mathematical formulas. It is, essentially, a program that allows the user to observe an operation through simulation without actually running the program. for the fiber optics fiber optics, transmission of digitized messages or information by light pulses along hair-thin glass fibers. Each fiber is surrounded by a cladding having a high index of refractance so that the light is internally reflected and travels the length of the fiber telecommunications industry, is pleased to announce the release of OptiSystem version 2.1. OptiSystem is a powerful tool that enables users to plan, test, and simulate simulate - simulation almost every type of optical link in the physical layer of a broad spectrum of optical networks. In an industry where time-to-market is imperative for success, OptiSystem 2.1 users can minimize time requirements and the expenses related to the design of optical systems, links, and components. Major enhancements to OptiSystem include integration with Optiwave's OptiBPM, compatibility with Agilent ADS, inclusion of electrical modulators and carrier generator components, and a new memory management system. OptiSystem 2.1 now includes an OptiBPM component that allows users to import waveguide waveguide, device that controls the propagation of an electromagnetic wave so that the wave is forced to follow a path defined by the physical structure of the guide. properties from OptiBPM, enabling the design of optical circuits such as ring resonators. In addition, OptiSystem 2.1 enables users to load signal data files from Advanced Design System (ADS), by Agilent EEsof EDA (1) (Electronic Design Automation) Using the computer to design, lay out, verify and simulate the performance of electronic circuits on a chip or printed circuit board. . These files contain time-domain waveform The shape of a signal. See wavelength, sine wave and square wave. data for defining the signals associated with certain sources. OptiSystem's compatibility with ADS enables users to benefit from technological expertise in electronic as well as optical design automation software systems. OptiSystem's electrical component library now includes components for carrier generation that allow users to simulate cable access systems easily. The component library also allows users to enter parameters that can be measured from real devices. Different types of modulators and modulation modulation, in communications modulation, in communications, process in which some characteristic of a wave (the carrier wave) is made to vary in accordance with an information-bearing signal wave (the modulating wave); demodulation is the process by which schemes are also available. OptiSystem 2.1 has a new memory management system that monitors the virtual memory usage and saves calculation graphs and results as required. In addition, OptiSystem 2.1 is fully compatible with Optiwave's entire line of optical design and simulation products. About Optiwave Since its inception in 1994, Optiwave Corporation has established its position as a world leader in the development of innovative software for the design, simulation, and optimization of components, links, and systems for the dynamic fiber optics telecommunications industry and other photonic Dealing with light (photons). See photon and photonics. applications. Optiwave Corporation also provides custom solutions through engineering design and consulting. Optiwave software has been licensed to many industry leaders and universities in over 40 countries. |
|
Printer friendly
Cite/link
Email
Feedback
Reader Opinion