Novel light moisturizer formulated by ISP.

Here are product formulas supplied by producers of raw materials.

* Included in some instances are sources of supply for the raw materials and instructions for preparation and use of the finished product.

No guarantee of performance or safety is implied by Happi.

* For more complete details readers should contact the suppliers directly using the telephone number or website provided with each formula.

If your company has a formula that you think would be of interest to readers of Happi: marketers of soaps & detergents; cosmetics & toiletries; waxes & polishes; disinfectants & sanitizers and other chemical specialties, we will be pleased to consider it for publication. Address all material to:

Formulary Editor

Happi

70 Hilltop Rd. Ramsey, NJ 07446 USA

Light Moisturizer

INGREDIENTS:                             % WT.

Phase A
Deionized water                          58.90
Stabileze OM (ISP)                        0.50
  (PVM/MA decadiene crosspolymer)
Glycerin                                  3.00
Versene NA (Dow Chemical)                 0.10
  (disodium EDTA)

Phase B
Escalol 567 (ISP)                          2.00
  (oxybenzone)
Escalol 557 (ISP)                          7.50
  (octinoxate)
Escalol 517 (ISP)                          1.00
  (avobenzone)
Ceraphyl 368 (ISP)                         2.00
  (ethylhexyl palmitate)
X-Tend 226 (ISP)                          10.00
  (phenethyl benzoate)
Ceraphyl 140A (ISP)                        1.50
  (isodecyl oleate)
Ceraphyl SLIK (ISP)                        3.00
  (isodecyl neopentanoate)
Cerasynt 840 (ISP)                         1.50
  (PEG-20 stearate)
Cerasynt 945 (ISP)                         2.00
  (glyceryl stearate (and) laureth-23)

Phase C
Triethanolamine 99% 0.50
Deionized water            5.00

Phase D
Optiphen Plus (ISP) 1.501
  (phenoxyethanol (and) caprylyl glycol
  (and) sorbic acid)

PROCEDURE:
Slowly sprinkle Stabileze QM into water of
phase A with mixing. Once Stabileze is completely
dispersed, heat and maintain at 80[degrees]C
for approximately 45 minutes with mixing. Add
disodium EDTA and glycerin to phase A with
mixing. Combine ingredients in phase B and
heat to 75-80[degrees]C with mixing. Add phase C to
phase A; mix for five minutes. Add phase B to
phase A/C; mix until homogeneous. Cool to
45[degrees]C, then add in phase O with mixing. Q.S. for
water loss.

PROPERTIES:
pH: 5.50; viscosity: 17 600 cps (Brookfield
model RVT, TB@5rpm)

MORE INFO:

ISP, 1361 Alps Road, Wayne, NJ 07470

Tel: [phone]; Fax: [phone]; Website: www.ispcorp.com

Thickened Mild Acid
Toilet Bowl Cleaner

INGREDIENTS:                  % WT.

Water                         84.3
Mackam TM (McIntyre Group)     5.0
Sulfamic acid                  5.0
Glycolic acid                  5.0
SXS, 40%                       0.7

PROCEDURE:
Charge water; add glycolic and sulfamic acids
slowly while mixing. Add Mackam TM and mix
until homogeneous. Add SXS to rech desired
viscosity.

PROPERTIES:
pH (as is): ~1; appearance @25[degrees]C: clear, yellow
liquid; viscosity @25[degrees]C, cps: 200-400;
freeze/thaw, three cycles: pass; 50[degrees]C stability
(one month): pass; 4[degrees]C stability (one month):
pass

MORE INFO:

McIntyre Group, 24601 Governors Highway, University Park, IL 60466

Tel: [phone]; Fax: [phone]

PEG-Free Shampoo

INGREDIENTS:                            % WT.

Phase A
Standapol ES-2 (Cognis)                  25.2
  (sodium laureth sulfate)
Planteren 2000 N (Cognis)                15.1
  (decyl glucoside)
Lexaine C (Inolex)                       10.2
  (cocamidopropyl betaine)
Sulfochem AEG (Chemron)                   4.0
  (ammonium lauryl sulfate (and) ALES
  (and) CAPB (andl cocamide DEA
  (and) lauramide DEA)
Glycerin (Spectrum)                       0.5

Phase B
Floraesters K-20W Jojoba (Floratech)      5.3
  (hydrolyzed jojoba esters (and)
  water (aqua))

Phase C
Deionized water q.s.
Quatrisoft Polymer LM-200 (Amerchol)      0.1
  (polyquaternium-24)
Tauranol 1-78 (Finetex)                   4.7
  (sodium cocoyl isethionate)

Phase D
Preservative                             q.s.
Fragrance (optional)                     q.s.
Dye (optional)                           q.s.

PROCEDURE:

Blend ingredients of phase A to uniformity using
moderate propeller agitation, while heating to
70[degrees]C. Add phase B to phase A and blend until
uniform. Heat water of phase C to 60[degrees]C and dissolve
Quatrisoft. Slowly add Tauranol 1-78 once
Quatrisoff has completely dissolved. Slowly
add phase C to phase AB, blend until uniform
and cool to 50[degrees]C. Add preservative of phase D
(and add fragrance and dye if required) to phase
ABC with moderate propeller agitation. Cool
mixture to room temperature.

PROPERTIES:
ph of finished shampoo: 6.5-7.0

MORE INFO:

Floratech Americas, 1151 N. Fiesta Blvd., Gilbert, AZ 85233-2238

2Tel: [phone]; Fax: [phone]; Website: www.floratech.com

Gloss Enhancement
Conditioning Shampoo

INGREDIENTS:                                 % WT.

Water                                     q.s. to 100
Standapol ES-2 (Cognis)                       30.0
  (sodium laureth sulfate)
Velvetex BK-35 (Cognis)                       10.0
  (cocamidopropyl betaine)
Silsoft A-553 (GE Advanced Material)           1.0
  (silicone quaternium-14)
Antil 141 (Degussa)                            2.0
  (polyethoxypropylene glycoldioleate)
Sodium chloride                                1.5
Citric acid 10% solution                       0.5
Preservative                                  q.s.
Fragrance                                     q.s.
Dye                                           q.s.

PROCEDURE:
Charge vessel with water. Pre-blend Silsoft A-553
with Standapol ES-2, mix until uniform and
add into the vessel. Add remaining ingredients,
one at a time, under agitation. Adjust pH
to 5.5-6.0 with citric acid. Continue stirring
until product is homogeneous. Fill off.

PROPERTIES:
pH: 5.93; viscosity: 7200 cps, Brookfield LVT
#3, 12rpm; appearance: clear, viscous liquid

MORE INFO:

GE Advanced Materials, Silicones, 187 Danbury Rd., Wilton, CT 06897

Tel: [phone] (customer service); [phone]

Fax: [phone] (customer service): 607-754-7517 (headquarters)

Website: www.gesilicones.com

Shower Oil Gel

INGREDIENTS:                              % WT.

Almond oil                                25.30
  (prunus dulcis amygdalus (sweet
  almond) oil)
Castor oil                                13.00
  (ricinus communis (castor) seed oil)
Zetesol 100                               57.00
  (MIPA-laureth-sulfate, laureth-4,
  cocamide DEA)
Nature Therapy D4110A (Symrise)            1.00
  (parfum (fragrance))
Oxynex K Uquid                             0.20
  (ascorbyl palmitate, tocopherol,
  ascorbic acid, citric acid, PEG-8)
dl-Alpha Tocopherol E 307                  0.50
  (tocopherol)
Aerosil 200 (Degussa AG)                   3.00
  (silica)

PROCEDURE:
Place oils, Zestol 100, fragrance and Oxynex K
liquid into a mixer. Add Aerosil 200 while
homogenizing or, preferably, stirring with a
dissolver. Stir with a dissolver or homogenize
until complete dispersion is obtained, continuing
another 5-10 minutes if necessary.

MORE INFO:

Degussa Corp. Business Line Personal Care 914 E. Randolph Rd., Hopewell. VA 23860

Tel: [phone]; Fax: [phone]; Website: www.degussa-personalcare.com

Soothing After-Shave

INGREDIENTS:                                 % WT.

Phase A
Deionized water                              85.20
Ultrez 10(BF Goodrich)                        0.20
  (carbomer)
Keltrol CGF (Kelco Biopolymers)               0.10
  (xanthan gum)
Disodium EDTA                                 0.05

Phase B
Crodamol STS (Croda)                          3.25
  (PPG-3 benzyl ether myristate)
Crodacol CS-50 (Croda)                        1.25
  (cetearyl alcohol)
Polawax                                       2.00
  (emulsifying wax NF)
Destressine 2000 (Croda)                      0.25
  (petrolatum (and) butyrospermum
  parkii (shea butter) unsaponiflables
  (and) docosahexanoic acid (and)
  eicosapentanoic acid (and) laureth-3
  (and) tocopherol acetate (and) zea mays
  (corn) oil unsaponifiables)

Phase C
Deionized water                               2.00
Triethanolamine                               0.20
Kava Kava (Croda)                             2.00
  (PEG-8 (and) water (and) piper
  methysticum extract (and) PEG8/SDMI
  copolymer)
Whole Leaf Aloe Gel (Coats Aloe)              1.50
  (aloe vera gel)
Hydrolite-5 (Dragoco)                         2.00
  (pentylene glycol)

PROCEDURE:
Disperse ingredients of phase A in water one at
a time in order given with rapid agitation. Heat
to 70-75[degrees]C. Combine ingredients of phase B
with mixing and heat to 70-75[degrees]C. Add phase B
to phase A with mixing and cool to 40[degrees]C. Add
phase C ingredients individually and mix thoroughly.

MORE INFO:

Croda Inc., 300-A Columbus Circle, Edison, NJ 08837

Tel: [phone]; Fax: [phone]; Website: www.crodausa.com

Deep Cherry Fragrance Oil

INGREDIENTS:              % WT.

Aldehyde C-14              0.19
Aldehyde C-10              0.19
Dimyrcetol                 0.38
Aldehyde myrac C           0.76
Aldehyde C-16              2.27
Isopar M                  15.00
Innosolv 305 (Innosol)    15.00
D-limonene                29.09
Benzaldehyde (98+%)       37.12

PROCEDURE:
Mix all of the aldehydes together until
homogeneous. Add the remaining chemicals
in order with smooth agitation. Mix until
clear. Mixing time is approximately 20 minutes.

PROPERTIES:
Appearance/odor/color: faint yellow liquid
with characteristic odor; FP: 125[degrees]F; SG:
.957 @25 DC; refractive index: 1.4847 @25
DC; solubility in water: insoluble; reactivity
in water: none

MORE INFO:

Innosol, Inc., 14403 Golden Pond Dr., Houston, TX 77084

Tel: [phone]; Fax: [phone]; Website: www.innosolinc.com

Sulfate-Free Ultra Mild
Liquid Body Wash for Sensitive Skin

INGREDIENTS:                                % WT.

Phase A
Plantapon ACG 35 (Cognis)                    13.0
  (disodiom cocoyl glutamate)
Plantapon LGC Sorb (Cognis)                  26.0
  (sodium lauryl glucose carboxylate
  (and) lauryl glucoside)
Lamesoft PO 65 (Cognis)                       8.0
  (coce-glucoside (and) glyceryl oleate)

Phase B
Eumulgin EO 33 (Cognis)                       0.7
  (PEG,150 distearete)
Preservative                                 q.s.
Citric acid 50%                              q.s.

Phase C
Deionized water                              52.3

PROCEDURE:
Mix surfactants (Plantapon ACG 35, Plantapon
LGC and Lamesoft PO 65). Add hot water (80[degrees]C)
while stirring. Incorporate Eumulgin E033 and
dissolve it. Cool down and add preservative and
fragrance. Adjust pH to 5.5.

PROPERTIES: ph value: 5.5; viscosity (mPas):
2000; Brookfield RVF, 23[degrees]C, sp. 4, 20rpm

MORE INFO:

Cognis Care Chemicals Division, 300 Brookside Avenue, Ambler, PA 19002

Tel: [phone]; Fax: [phone]; Website: www.cognis-us.com