New polymer uses sunlight to arm itself against UV damage.

* Using sunlight to protect against sunlight--that's the unusual concept behind GE Plastics' new Lexan SLX polymer. This clear, high-gloss resin was commercialized for Class A auto body panels and other outdoor weather able applications in 2001 under the name Sollx. Today it goes by the name Lexan SLX, and for the first time GE is publicly revealing details of its chemical composition and how this clear, colorless resin that contains no pigment or additives can provide a paint-free, decorative finish that lasts for 10 years.

Shape-shifting sunscreen

Until recently, GE said only that Lexan SLX is an amorphous polycarbonate copolymer. Now the company has revealed what kind of copolymer. As shown in Fig. 1, the resin consist, of PC segments alternating with ITR segments. ITR (isophthalate terephthalate resorcinol) is the part that contributes the weathering protection--but not in its native state. When initially exposed to sunlight, Lexan SLX lets uv light pass through freely. But in its first day outdoors, the resin stores up enough solar energy to undergo a chemical transformation. The ITR segments rearrange themselves to form hydroxybenzophenones embedded in the polymer chain that absorb almost all uv and near-uv radiation (Fig. 2).

[FIGURES 1-2 OMITTED]

The reaction occurs only in the top surface of the polymer to a depth of a few microns. As the surface erodes very slowly over time, the next few microns will then go through the same photochemical reaction.

Ensemble act

In its most highly publicized uses so far, Lexan SLX has acted as one component of a decorative surfacing system that can replace paint. As shown in Fig. 3 Lexan SLX forms the clear, colorless surface layer of a coextruded film to be used as a preformed insert for in-mold decorating (IMD). Lexan SLX protects the under-layer of pigmented Lexan PC. The resulting film can then be laminated to a thicker substrate of PC, a PC alloy, or most poly esters. With the addition of an appropriate tie, layer, the SLX film can adhere to glass-reinforced polyurethane, long-glass polypropylene composites, TPO, PP/PPO alloy (GE's Noryl PPX), or even thermoset polyester SMC. The SLX film can withstand SMC molding temperatures, says Venkatakrishnan Umamaheswaran, GE's industry manager for SLX body panels. He adds that it may even be possible to laminate SLX film to steel for stamping.

[FIGURE 3 OMITTED]

When exposed to more than 25,000 kJ/[m.sup.2] of xenon-arc accelerated weathering--said to be equivalent to 10 years outdoors in Florida--SLX film retains 95% of its gloss. (Starting value for 60[degrees] gloss is >100.) When back-molded with GE's Xenoy PC/PBT resin and subjected to OEM paint specification tests, SLX film reportedly performs in most cases better than or equal to exterior paint systems. Some of the more strikingly positive results are in resistance to scratches, brake fluid, and acid rain, GE repots. Lexan SLX also boasts good resistance to fuels. Though it has good surface hardness, scratches and gouges can be buffed out easily, GE claims.

Hitting the road

GE's primary target for SLX film is automotive paint replacement in IMD applications, says Todd Sweeney, global market manager for Lexan SLX. Available in solid and metallic colors, it has already appeared in the roof panel of the Smart roadster, made in Germany. Front fascias, fenders, door panels, mirror housings, trunk lids, and a hood are also in development Other possibilities are wheel covers and accent trim. Non-automotive applications include fenders on the Segway transporter. SLX film/sheet product manager Bob Johnson see further potential in outdoor enclosure for communications equipment and parts for heavy trucks, lawn/garden equipment, construction, and boats.

If laminated to heavier sheet, SLX film can be directly thermoformed into finished parts. Lexan SLX is said to have greater than 200% draw capability. Promising markets are panels for off-road construction and recreational vehicles, lawn/garden equipment, and auto aftermarket parts. Clear sheet of SLX film laminated to PC could find a home in lighting, signs, displays, and industrial screens.

GE recently fielded an injection molding grade (Lexan SLX 2431) that can be used on its own to make large lenses for industrial and street lighting.

LEARN MORE online

Visit www.plasticstechnology.com/articles/200402cu3 for links to these related articles:

* Where the Action Is: Decorating with Formable Films, January '04

* Thermoforming Goes Paint-Free, Too, January '04

NEED TO KNOW MORE?

GE Plastics, Pittsfield, Mass. [phone], www.geimd.com