New LCP/PPS alloys target complex parts.Two new LCP/PPS alloys are said to combine the properties of both materials to meet the demands of complex electrical, electronic, and industrial components. Vectra V140 and V143XL from Ticona, Florence, Ky., are said to improve on PPS (Packets Per Second) The measurement of activity in a local area network (LAN). In LANs such as Ethernet, Token Ring and FDDI, as well as the Internet, data is broken up and transmitted in packets (frames), each with a source and destination address. by nearly eliminating flash while also providing better flow at relatively low injection pressures and high strength in thin walls. They also have mold temperatures of 80 to 120 C, versus the 135 C typical of PPS. Compared with straight LCP (Link Control Protocol) See PPP. LCP - Link Control Protocol , the new alloys offer higher weld strength and less warpage in many designs. The new alloys retain the physical and mechanical properties of LCP and PPS. For instance, Vectra V140 has ultimate tensile strength tensile strength Ratio of the maximum load a material can support without fracture when being stretched to the original area of a cross section of the material. When stresses less than the tensile strength are removed, a material completely or partially returns to its of 1450 MPa, flexural strength of 230 MPa, and compressive com·pres·sive adj. Serving to or able to compress. com·pres  sive·ly adv. modulus of 16,000 MPa. The grades are compatible with lead-free soldering in surface mount applications. Tel: (800) 526-4960 * PTDirect: 688RF
|
|
||||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion