New 1x1 Tab-Down SMT J0C Series Connectors from Pulse; RJ45 Connectors Designed for SOHO, LAN-on-Motherboard, Hub and Switch Applications.Business Editors/High-Tech Writers SAN DIEGO--(BUSINESS WIRE)--April 23, 2004 Pulse, a Technitrol (NYSE NYSE See: New York Stock Exchange :TNL) Company, introduces the J0C-0003/4/5/6 series 10/100Base-TX surface mount (SMT (1) (Surface Mount Technology) See surface mount. (2) (Station ManagemenT) An FDDI network management protocol that provides direct management. Only one node requires the software. SMT - Station Management ) RJ45 single port (1-by-1) tab-down connectors with integrated magnetics. The robust J0C connector series can withstand the mechanical and thermal stresses of reflow soldering encountered on high-speed, automated, surface mount production lines, yet they are priced competitively with through-hole connectors. A significant feature of the J0C connectors is the co-planarity on the SMT pins of less than 0.102mm (0.004 inch), minimizing dry joints after solder reflow and decreasing rework and scrap. Hipot performance complies with the IEEE802.3 standard. The operating temperature range extends from 0 to 70 degrees Celsius. Designed for Direct Subscriber Line Asynchronous Refers to events that are not synchronized, or coordinated, in time. The following are considered asynchronous operations. The interval between transmitting A and B is not the same as between B and C. The ability to initiate a transmission at either end. Multiplexing (DSLAM (DSL Access Multiplexor) A central office (CO) device for ADSL service that intermixes voice traffic and DSL traffic onto a customer's DSL line. It also separates incoming phone and data signals and directs them onto the appropriate carrier's network. See DSL. ), the J0C Series adds value to Small Office/Home Office See SOHO. (SOHO), LAN (Local Area Network) A communications network that serves users within a confined geographical area. The "clients" are the user's workstations typically running Windows, although Mac and Linux clients are also used. on Motherboard, hubs, switches, Network Interface Cards (NICs), remote Device Terminals (DTs) and remote servers. J0C Series products also meet or exceed the IEEE802.3i standard for 10Base-T, IEEE802.3u standard for 100Base-TX and the ANSI (American National Standards Institute, New York, www.ansi.org) A membership organization founded in 1918 that coordinates the development of U.S. voluntary national standards in both the private and public sectors. It is the U.S. member body to ISO and IEC. X3.263 performance standard. The J0C Series connectors are available in tape-and-reel or tray packaging. Prices start at $1.60 per unit for quantities of 10,000. Unit price may vary depending on configuration and shipping destination. Contact Pulse directly for samples and high-volume pricing. Lead-time is four to six weeks. Detailed technical specifications are available on data sheet J409, http://www.pulseeng.com/pdf/J409.pdf located on the Pulse Web site. About Pulse Headquartered in San Diego, Pulse, a Technitrol (NYSE:TNL) Company, is one of the largest magnetic component manufacturers in the world. Pulse primarily serves OEMs in the data networking, telecommunications, high-speed Internet access, power conversion, military/aerospace and consumer electronics industries. Recognized as experts in interference (noise) reduction, miniaturization min·i·a·tur·ize tr.v. min·i·a·tur·ized, min·i·a·tur·iz·ing, min·i·a·tur·iz·es To plan or make on a greatly reduced scale. min , power management and signal conversion, Pulse offers an extensive line of custom and standard passive magnetic solutions for OEMs in commercial as well as consumer industries. An ISO (1) See ISO speed. (2) (International Organization for Standardization, Geneva, Switzerland, www.iso.ch) An organization that sets international standards, founded in 1946. The U.S. member body is ANSI. 9000 registered manufacturer, Pulse is fully engaged in joint development programs with key customers to ensure they receive high-performance, high-quality and high-reliability products at competitive prices. Pulse is a member of and actively participates in IEEE, ANSI, T1/E1 and the DSL Forum. In North America, contact Pulse's worldwide headquarters in the United States at 858-674-8100. The Pulse European offices are located in the United Kingdom and may be reached at +44-1483-401700, and its Asian offices in Singapore can be reached at +65-6287-8998. For more information, visit the Pulse Web site at www.pulseeng.com. Copyright (C)2004 Pulse Engineering Inc. All rights reserved. All brand names and trademarks are properties of their respective holders. Cautionary Note: This message contains "forward looking statements" within the meaning of the Private Securities Litigation Reform Act The Private Securities Litigation Reform Act of 1995 (PSLRA) implemented several significant substantive changes affecting certain cases brought under the federal securities laws, including changes related to pleading, discovery, liability, class representation and awards fees and of 1995. Actual results may differ materially. This release should be read in conjunction with the factors set forth in Technitrol's report on Form 10-K for the year ended December 26, 2003 in Item 1 under the caption "Factors That May Affect Our Future Results (Cautionary Statements for Purposes of the "Safe Harbor" Provisions of the Private Securities Litigation Reform Act of 1995)." J0C_hires, jpg photo available at www.pulseeng.com/News/media_gallery.cfm. |
|
||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion