Nanotech Ventures 2006 Presenter Profiles.

BOSTON -- Nanotech Ventures 2006 takes place May 8 - 11, 2006 at the Hynes Convention Center in Boston. For in-depth information about the event visit http://www.nsti.org/Nanotech2006/Development/ventures.html. Below are profiles from Nanotech Ventures 2006 presenters.

Business Wire is the official news wire for Nanotech Ventures 2006. Breaking news releases and photos are available at http://www.tradeshownews.com, Business Wire's trade show, conference, and event news resource.

Company: Anchor Science LLC
Investor Relations Contact: Ewa S. Kirkor
Investor Relations Contact Phone: [phone]
Web: anchorscience.com
Date of Presentation: May 9, 2006

Branford, CT: Anchor Science LLC announces progress in developing
technology for printing high conductivity inks without
high-temperature curing. This patent-pending technology is employable
for entirely printable antennas, physical, chemical and biological
sensors, and RFID tags. Anchor Science device prototypes detect
temperature and humidity. Bio- and chemical sensors are planned for
the near future. A wearable health monitor consisting of a positioning
device and wireless, unobtrusive sensors has potential for protecting
military personnel, police, firefighters, pilots, drivers, athletes,
elderly, and individuals with chronic conditions. The low cost of our
sensors will drive alternative applications. For further information,
contact [e-mail].

Company: Argonide Corporation
Investor Relations Contact: Fred Tepper
Investor Relations Contact Phone: [phone]
Web: www.argonide.com
Date of Presentation: May 9, 2006

We were founded in 1994 to invest in a Russian process that
produces nanopowders. In 1999 we invented a water filter that uses an
alumina fiber only 2 nanometers in diameter that electrostatically
attracts and retains small particles. The patented filter
(NanoCeram(R)) has wide application for purifying industrial as well
as drinking water. It features a high flowrate and high dirt holding
capacity. Yet it is very efficient filter for ultra-fine particles
such as bacteria and virus. In 2005 we launched the sale of water
purification cartridges. Recently we developed an air filter that is
more efficient than HEPA.

Company: ChemNova Technologies, Inc.
Investor Relations Contact: Dr. Chhiu-Tsu Lin
Investor Relations Contact Phone: [phone]
Web: www.chemnova.com
Date of Presentation: May 9, 2006, at 17:00 p.m.

ChemNova Technologies, Inc., established in 1999, is a material
and analytical engineering company. A US patent #7,015,280 on
conductive emulsion for preparing surface for powder coating is in
negotiation for a licensing agreement. A novel CoatID: Laser-Induced
Materials analyzer has been established in the global market . We will
present an innovative heat-releasing device, termed molecular fan (US
patent pending). Molecular fan is a nanocoating, with active molecular
vibrations to work as cooling fans radiatively. It shows to lower the
equilibrium system temperature by 13 oC that is a powerless and
spaceless device. Both venture funding and partnership are sought.

Company: Cryscade Solar Ltd.
Investor Relations Contact: Dmitry Repin, CEO
Investor Relations Contact Phone: [e-mail], +7.495.251.9998
Web: www.cryscade.com
Date of Presentation: May 8, 2006

Cryscade Solar Ltd. is a global technology company that is
bringing to market new cost-efficient organic solar cell material and
a low-cost fabrication technology. Our material can be printed or
spray-coated onto a flat or flexible substrate at room temperature.
Main competitive advantages include low cost (3-4 times less per
square meter than silicon cells), full coverage of sun spectrum, and
direct path to scalable manufacturing. Cryscade Solar builds its
business model on strong IP portfolio, efficient combination of
in-house R&D capabilities in Moscow, Russia with outsourcing at
leading research centers worldwide, and far-reaching strategic
partnership.

Company: Digital Solid State Propulsion, LLC
Investor Relations Contact: Wayne Sawka, Ph.D.,
  [e-mail]
Investor Relations Contact Phone: [phone]
Web: www.dsspropulsion.com
Date of Presentation: 5/8/2006

DSSP LLC developed solid propellant devices are a first of their
kind, capable of multiple ignitions-extinguishments with the burn-rate
controlled digitally by electrical input and have no moving parts. The
environmentally friendly propellant is insensitive to flame ignition,
does not produce toxic combustion gases and is low in particulates.
The basis for solid-state "pneumatic batteries" has now been
demonstrated. Initial defense applications include microchip-based
rocket thrusters, safe igniters for rocket motors and fast response
ACS systems. Commercial applications include robotic actuators,
FX/special-effects and circuit board mounted on-demand gas generators.
Pneumatic batteries should enable many new industrial and consumer
products.

Company: Enable IPC Corporation
Investor Relations Contact: Rich Kaiser
Investor Relations Contact Phone: [phone]
Web: www.enableipc.com
Date of Presentation: May 8

Enable IPC Corporation has a patent pending on a microbattery
technology that lowers manufacturing costs, is more powerful than
comparable products, and may be smaller than the period at the end of
this sentence.

There is substantial market potential for our technology in many
applications.

We have received some angel-level funding, but remain in the
development stage. We have some exciting test results but need to
continue development before licensing this technology or providing
product to customers. We anticipate R&D completion by late 2007.

Company: GEMIO Technologies
Investor Relations Contact: Andreas Hieke
Investor Relations Contact Phone: [e-mail]
[phone]
Web: www.gemiotech.com
Date of Presentation: 9. May 2006, 6pm

Nano-biotech and life science strive to identify molecular
patterns that correlate with disease states (biomarker discovery). The
goal is to detect and treat diseases, such as cancer, on a molecular
level at very early stages. GEMIO Technologies is a Silicon
Valley-based company that is developing patent-pending next generation
ion sources for biological macromolecules that promise to enable
unprecedented sensitivity and efficiency in mass spectrometry, the
principal instrument in biomarker discovery. Dr. Andreas Hieke,
GEMIO's Chief Executive Officer and founder, will present aspects of
GEMIO's technology, its vision and future.

Company: HTS Nano-Ceramics, Ltd
Investor Relations Contact: Anatoly Rokhvarger
Investor Relations Contact Phone: [phone]
Web: www.trogcorp.com
Date of Presentation: May 8, 2006

We US patented, validated at Polytechnic University (Brooklyn,
NY), eight times presented and six times published at American
Ceramic, Materials Science, Chemical and Mechanical Engineering
society journals and proceedings, and verified by three groups of
experts an innovation comprising novel superconductor nano-structured
sintered ceramic material and ceramic-silicone-polymer thermo-chemical
nanotechnology of surface coated and bulk shaped superconductor leads
including 3G superconductor ceramic (HTS) wire. Only an application of
inexpensive 3G HTS multi-strand (round) wire can result in 5 - 10x
cost reductions as well as weight and size/diameter decreases of
electrical motors, generator rotors, transformers, and cables saving
15-25% energy consumption.

Company: Liquidia Technologies
Investor Relations Contact: Todd Pope
Investor Relations Contact Phone: [phone] ext. 222
Web: www.liquidia.com
Date of Presentation: Monday, May 8th, 2006

Liquidia technologies enables breakthrough applications based on
novel fluoropolymer materials for the electronics, life science,
medical, chemical and consumer goods industries. Fluorocur(TM),
Liquidia's innovative material platform, was developed from
fluoropolymers that are liquids at room temperature but cure to
transparent, PTFE-like solids when polymerized. Liquidia uses Fluorcur
technology to fabricate solvent resistant, elastomeric microfluidic
devices as well as high performance molds for imprint lithography.
Furthermore, Liquidia has pioneered a process called PRINT (Particle
Replication in Non-Wetting Templates) which allows for the first time,
the precise fabrication of shape-specific customized organic
nanoparticles that will revolutionize applications in targeted
delivery, imaging, security, and electronics among others.

Company: NanoBioMagnetics, Inc (NBMI)
Investor Relations Contact: Charles E Seeney
Investor Relations Contact Phone: [phone]
Web: www.nanobmi.com
Date of Presentation: 5/8/2006

NanoBioMagnetics is a nanobiomaterials company with focus on an
emerging area of nanomedicine referred to as Organ-Assisting-Device
(OAD) technologies. The Company is developing an electromagnetic
methodology in which magnetically responsive nanoparticles (MNP) drive
a desired physiological event. NBMI's OAD technologies have
significant potential for treatment of a range of human health
diseases function as (1) vehicles for site-specific drug delivery, or,
(2) as biostable implants for organ movement. MNP configurations are
developed and evaluated in collaboration with major research
institutions. Our customer targets are major pharmaceutical houses.
The company is seeking investment capital to support business
development and research activities.

Company: NanoLambda, Inc.
Investor Relations Contact: Bill Choi
Investor Relations Contact Phone: [e-mail], 412-828-6266
Web: www.nanolambda.net
Date of Presentation: May 9, 2006

NanoLambda is developing Spectrum Sensor chip,
Spectrometer-on-a-chip. Each pixel of the Spectrum Sensor chip detects
a pre-defined wavelength light. This enables not only
"mobile/wearable" health monitors such as non-invasive
hemoglobin/glucose monitors, but also enables miniaturized sensor
devices for simultaneous detection of multiple toxic gases /hazardous
materials or color changing materials.

Where ever and whenever you want to see wavelengths, or wavelength
changes "at a compact scale", Spectrum Sensor could be a good
solution.

NanoLambda was founded in 2005 as a spin-off company of University
of Pittsburgh, in Pittsburgh PA USA.

Company: Nanomix, Inc.
Investor Relations Contact: David Macdonald, CEO
Investor Relations Contact Phone: [phone]
Web: www.nano.com
Date of Presentation: Monday, May 8, 2006

Nanomix is a leading nanotechnology company launching a portfolio
of devices based on Sensation(TM) detection technology. These
scaleable, nanoelectronic devices use ultra-sensitive carbon nanotube
sensing elements combined with proprietary chemistries. These devices
can be deployed across a broad range of industrial and medical
applications where the attributes of nanodetection technology - low
power consumption, small form factor, and high sensitivity offer
significant performance advantages and enable unprecedented access to
critical information. Nanomix is located in Emeryville, California.
For additional information, please visit the Nanomix website at
www.nano.com.

Company: NanoSpire, Inc., Buxton, ME 04093
Investor Relations Contact: Mark L. LeClair, CEO & Founder
Investor Relations Contact Phone: [phone]
Web: [e-mail]
Date of Presentation: May 8, 2006

NanoSpire provides the first tool that directs and controls the
energy and size of high-speed liquid cavitation microjets. Two US
patents for directing microjets have been issued (6,960,307 and
6,960,307) three more are pending. The microjets perform top down
processes: cut, drill, shot peen and anneal and bottom up processes:
weld, coat or implant nanophase materials. The platform technology
applies to a multitude of markets, including solar, sensors, fuel
cells, semiconductors, MEMS/NEMS, biotech, microfluidics, microsurgery
and many others. NanoSpire won the Innovation Technology Award at the
Nanotech 2003 + Future Conference in Tokyo. NanoSpire is seeking
investors and strategic partners.

Company: NIL Technology
Investor Relations Contact: Brian Bilenberg
Investor Relations Contact Phone: [phone]
Web: www.nilt.com
Date of Presentation: May 8 2006

NIL Technology produces and sells stamps for nanoimprint
lithography (NIL). NIL is a nano-patterning technique combining the
high precision of electron-beam-lithography with rapid production of
nanostructures. NIL Technology's stamps comprise a patent pending
technology which generically ensures second-to-none large area
homogeneous imprints. The minimum feature size on the stamps is below
20 nm.

NIL technology stamps can be used in many different applications such
as:

-- Solar cells and fuel cells
-- Batteries
-- Micro and nano fluidics
-- Light emitting diodes and lasers
-- Life science
-- Optics
-- Radio frequency components
-- Data storage
-- Security
-- CPU's and memory

Company: Nucleus Remodeling, Inc.
Investor Relations Contact: Asutosh N. Sharda
Investor Relations Contact Phone: [phone]
Date of Presentation: 05/09/2006

Nucleus Remodeling, Inc. (NRI) is a life science discovery company
developing tools and therapeutic solutions for the regenerative
medicine industry. Founders Dr. Asutosh Sharda, a biomedical engineer,
and Dr. Joseph Zahner, a developmental biologist, combined their
talents to provide solutions to the growing demand for cell-based
therapies, while avoiding stem cells. NRI holds proprietary positions
in two basic technologies: (a) cells derived from skin that can be
reprogrammed to generate any useful cell type or replacement tissue,
and (b) novel reagents for biopharma discovery. NRI is looking for
capital and management to help bring these products closer to market.

Company: Orionsolar Photovoltaics
Investor Relations Contact: David Waimann
Investor Relations Contact Phone: [phone]
Web: www.orionsolar.net
Date of Presentation: May 9th

We, at Orionsolar, are developing very low cost solar energy cells
and we maintain that our manufacturing costs will less than half
existing silicon photovoltaics. Our first designs focus on solar home
systems and the DIY markets and we are excited about the prospect of
providing affordable solar technology to consumers worldwide.

Company: Prism Solar Technologies, Inc.
Investor Relations Contact: Rick Lewandowski
Investor Relations Contact Phone: [phone]
Web: http://www.prismsolar.com
Date of Presentation: May 9, 2006

Prism Solar Technologies, Inc., (PST) is a privately held, early
stage company, formed to manufacture a new type of photovoltaic (PV)
module that incorporates transparent holographic optical elements
within the module, producing a Holographic Planar Concentrator (HPC).
This new, patented technology reduces the amount of silicon in a solar
module up to 75%, thereby reducing the module cost per watt
dramatically. The HPC replaces $20-per-square-foot of silicon with
pennies-per-square-foot holograms.

Prism Solar is currently seeking Series A financing and expects to
begin manufacturing by the end of the year.

Company: Progressive Cooling Solutions LLC
Investor Relations Contact: [e-mail]
Investor Relations Contact Phone: [phone]
Web: www.progressivecooling.com
Date of Presentation: May 9th 2006 at 17:00

Progressive Cooling Solutions products are based on
nano/microfabrication techniques developed at the University of
Cincinnati. This radical cooling technology is unique in that it does
not require fans, pumps, dangerous gases, or electricity. The
semiconductor industry is presented as the first market segment for
launch to demonstrate this technologies ability to overcome one of the
biggest barriers in developing faster computer speeds- HEAT! Company
projections anticipate first commercial products to be offered by June
2008. PCS will provide a quantum leap forward to the thermal hardware
industry by providing heat transfer devices with superior cooling
capability at the right price.

Company: ScienceGL, Inc.
Investor Relations Contact: Alexander Onik
Investor Relations Contact Phone: [phone]
Web: http://www.sciencegl.com
Date of Presentation: Monday, May 8, 2006

ScienceGL offers leading-edge 3-D and 4-D software visualization
software for science and technology applications. Our unique set of
interactive measurement tools was specifically developed to meet the
demands of nanotechnology, nanometrology, and nanomanipulation. Data
visualization is a rapidly growing field. ScienceGL aims to bring our
in-depth understanding of current processes and trends to the end
user. ScienceGL aims to become the industry leader in scientific and
engineering 3-D/4-D visualization solutions by providing best in class
products and services. We are proud to offer one of the best
visualization engines on the market for an affordable price. Potential
and existing customers include hardware/software manufacturers, OEMs,
ISVs, research and academic institutions, and government agencies.
Existing Total Customers: 15.

Company: SMOLTEK AB
Investor Relations Contact: David Brud
Investor Relations Contact Phone: [phone]
Web: www.smoltek.com
Date of Presentation: May 9

Smoltek is devoted to develop, validate and utilize state of the
art nanoscale technologies for the semiconductor industry by enhancing
performance and enabling new functionalities.

By exploring the excellent thermal and current carrying properties
of carbon nanofibers, Smoltek has developed a solution to integrate
them into existing CMOS-technology. With its technology, Smoltek aims
to offer a solution for cooler and faster microprocessors utilizing
existing processes.

Company: Solexant Corp.
Investor Relations Contact: Damoder Reddy
Investor Relations Contact Phone: [phone]
Web: www.solexant.com
Date of Presentation: May 9 at 3:30 pm

Solexant is developing high efficiency low cost nanostructured
solar cells. Solexant solar cells achieve high efficiency by
incorporating nanomaterials that harvest light from the entire solar
spectrum and achieve low cost by adopting roll to roll manufacturing
process.

Solexant IR nanostructures can be integrated into thin film solar
cells to increase efficiency and reduce cost. Solexant business model
is to make/sell broadband nanostructured solar cells to OEMs and
make/sell IR absorbing nanomaterials and nanostructures to thin film
solar cell manufacturers.

Solexant is seeking Series-A funding to build prototypes and
strategic partnerships with thin film solar cell manufacturers and
chemical companies.

Company: Telomolecular
Investor Relations Contact: Matthew A. Sarad
Investor Relations Contact Phone: [phone]
Web: www.telomolecular.com
Date of Presentation: May 8 2006

Telomolecular Corp. develops nanotechnologies capable of
regenerating human tissues through the delivery of agents that
therapeutically lengthen and repair chromosomal telomeres. Successful
therapies based on this tactic may offset, and potentially reverse,
many presently incurable age-related diseases and possibly reverse
processes of human aging. Other pharmaceutical targets include
nanotechnologies in the treatment of cancer.

Company: U.S. Civilian R & D Foundation
Web: www.crdf.org
Date of Presentation: May 10, 2006

The U.S. Civilian Research & Development Foundation (CRDF) is a
nonprofit organization authorized by the U.S. Congress and established
in 1995 by the National Science Foundation. This unique public-private
partnership promotes international scientific and technical
collaboration, primarily between the United States and Eurasia through
grants, technical resources, and training.

CRDF enables American and Eurasian scientists, engineers and
organizations to explore new commercial research partnerships, and
move the product of their collaboration to the market through a wide
selection of progressive, industry-orientated grants.

Note to Editors: Business Wire's PressPass allows you to create free, custom Web, RSS, and email-based news feeds from more than 160 industry options, dozens of subject categories and thousands of geographic preferences as well as by specific company filters. In addition, PressPass subscribers have access to exclusive content, experts, company profiles, email alerts, survey services and other media services.

Note to Event Organizers: Add your trade show, conference, or event to www.tradeshownews.com, Business Wire's online event calendar. For information, email [e-mail].