Printer Friendly
The Free Library
14,680,088 articles and books
Member login
User name  
Password 
 
Join us Forgot password?

NIST releases split-cylinder resonator measurement software.


NIST (National Institute of Standards & Technology, Washington, DC, www.nist.gov) The standards-defining agency of the U.S. government, formerly the National Bureau of Standards. It is one of three agencies that fall under the Technology Administration (www.technology.  has released SplitC, an automated software program for measuring the high-frequency electrical properties of dielectric substrates using a split-cylinder resonator resonator /res·o·na·tor/ (rez´o-na?ter)
1. an instrument used to intensify sounds.

2. an electric circuit in which oscillations of a certain frequency are set up by oscillations of the same frequency in another
. With this software, developed by a NIST scientist, manufacturers of printed-wiring boards, ceramics substrates, and other low-loss dielectric materials Dielectric materials

Materials which are electrical insulators or in which an electric field can be sustained with a minimal dissipation of power. Dielectrics are employed as insulation for wires, cables, and electrical equipment, as polarizable media for
 can use the split-cylinder resonator method to non-destructively measure the dielectric constant dielectric constant
n.
See permittivity.
 and loss tangent over a frequency range of 5 GHz to 50 GHz. Included in this release of SplitC is a new theoretical model for the split-cylinder resonator, derived using the mode-matching method, which improves measurement accuracy and decreases computation time. In addition, SplitC incorporates a new method, recently developed by NIST staff, for measuring the resonant frequency resonant frequency,
n the specific frequency at which an object vibrates.
 and quality factor of resonance curves, resulting in a reduction of measurement uncertainty. This release of SplitC follows the successful test of an earlier beta version in which participants from industry and academia published meas-urement data for a wide range of dielectric materials.

CONTACT: Robert Judish, (303) 497-3380; judish@boulder.nist.gov.
COPYRIGHT 2003 National Institute of Standards and Technology
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2003, Gale Group. All rights reserved. Gale Group is a Thomson Corporation Company.

 Reader Opinion

Title:

Comment:



 

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:General Developments
Publication:Journal of Research of the National Institute of Standards and Technology
Article Type:Brief Article
Geographic Code:1USA
Date:May 1, 2003
Words:162
Previous Article:Elastic moduli data for polycrystalline oxide ceramics added to webbook.(General Developments)(Brief Article)
Next Article:Fundamental noise limitations on supercontinua generated in microstructure fiber determined by NIST.(General Developments)
Topics:



Related Articles
NIST'S SOFTWARE USABILITY PROGRAM GAINING INDUSTRY ATTENTION.(Brief Article)
LTCC SUBSTRATES CHARACTERIZED AT HIGH FREQUENCIES.(low temperature co-fired ceramics)(Brief Article)
Message from the chief editor.(Brief Article)(Editorial)
Foreword.
A double-primary dead-weight tester for pressures (35-175) kPa in gage mode.
NIST-developed algorithms reveal fundamental flaws in coordinate measuring machine fitting software. (General Developments).(Brief Article)
A primary dead-weight tester for pressures (0.05-1.0) MPa.
NIST delivers radar cross section standard artifacts to industry. (General Development).(Brief Article)
NIST researcher highlights challenges of "Talking Ceramics". (General Developments).
NIST researchers develop improved high-resistance standards.(General Developments)

Terms of use | Copyright © 2009 Farlex, Inc. | Feedback | For webmasters | Submit articles