Moving die parts change profile shapes 'on the fly'.* Change one tubing lumen into two, or two lumens into three, or even split one tube into two in a "Y" shape: These are some of the dramatic alterations that can be made "on the fly" with a novel articulated die concept available for license from Specialty Silicone Fabricators, a medical tubing maker in Paso Robles Robles is a common surname in the Spanish language meaning oaks, and may refer to:
Specialty Silicone's shape-shifting Geotrans (geometric transition) die technology has been used so far only for the company's silicone rubber Noun 1. silicone rubber - made from silicone elastomers; retains flexibility resilience and tensile strength over a wide temperature range synthetic rubber, rubber - any of various synthetic elastic materials whose properties resemble natural rubber tubing, but it can be licensed for non-medical thermoplastic A polymer material that turns to liquid when heated and becomes solid when cooled. There are more than 40 types of thermoplastics, including acrylic, polypropylene, polycarbonate and polyethylene. applications. Moving die parts Specialty Silicone has patented a number of dies with moving parts Moving parts are the components of a device that undergo continuous or frequent motion, most commonly rotation. "Parts" only include the mechanical components which does not include fuel, or any other gas or liquid. : * Continuous "Y"-shaped lumen has one lumen that splits into two or three inside a continuous tube. * Lumens can start and stop, previously accomplished only by welding welding, process for joining separate pieces of metal in a continuous metallic bond. Cold-pressure welding is accomplished by the application of high pressure at room temperature; forge welding (forging) is done by means of hammering, with the addition of heat. plugs in a secondary operation. This tooling (U.S. Patent 6,394,141, May'02) raises and lowers tines in the die mandrel mandrel /man·drel/ (man´dril) the shaft on which a dental tool is held in the dental handpiece, for rotation by the dental engine. man·drel or man·dril n. 1. . * Three moving die sections make a one-piece, "Y"-shaped tube (U.S. Patent 5,945,052, Aug. '99) with one inlet inlet /in·let/ (-let) a means or route of entrance. pelvic inlet the upper limit of the pelvic cavity. thoracic inlet the elliptical opening at the summit of the thorax. tube that transforms seamlessly into two. Previously such tubes could be made only by welding individual tubes onto a molded "Y" connector, with the inherent risk that the welds could come apart. Specialty Silicone has even built dies to transform one tube into three. * A one-piece surgical drain changes shape from a small round tube with 3/16-in. OD into a wide, flat hollow profile 10 x 4 mm and then back again (U.S. Patent 5,549.579, Aug.'96). The single lumen transforms from round to a flat oval with ribs on one side that keep the flat lumen from collapsing. The mandrel is round in front, sloping smoothly into a flat oval with lengthwise length·wise adv. & adj. Of, along, or in reference to the direction of the length; longitudinally. Adj. 1. lengthwise ridges on one side. As the mandrel oscillates back and forth in the die, it changes the lumen from round to ribbed oval. At the same time, die plates outside of the profile move in and out to reshape the outside from round to flat and back, keeping nearly constant wall thickness. * Specialty Silicone's latest tooling (patent pending) creates spirals inside a profile. For example, multiple lumens can loop or twist around each other inside a solid tube to prevent kinking. Spirals are made with a linear sequence of two or more "tortuous tor·tu·ous adj. Having many turns; winding or twisting. tortuous adjective Referring to complexly twisted thing. Cf Tortious. conduits," threaded to give different cross-sections. A solid panel can also be molded in the die wall in the form of a spiral baffle to provide static mixing or turbulent flow. "The lumen spins, stops, then spins in the other direction. The spirals go one inch in one direction, then reverse and spiral one inch in the other direction," explains v.p. of R&D Charles Schryver, co-inventor of the dies. "Then the wall between the two lumens stops, and the two lumens flow together." * Specialty Silicone's first patent simply creates tubing with a constant ID and variable OD (Patent 5,511,965 April '96). This can produce catheter tubes with stiff, thick sections and thin, flexible sections. Variable OD is made by moving a ring forward and back against the die plate to alter the gap between the die opening and mandrel. Good for thermoplastics? An unanswered question is whether Specialty Silicone's moving-die technologies will work with thermoplastics. Commercial designers and makers of profile dies for both silicones and thermoplastics give a qualified "yes." Shear and viscosity requirements are similar, they say, except that thermoplastic extrusion provides continuous flow, while silicone extrusion can start and stop. Silicone dies need cooling channels, and thermoplastic dies need heating channels. Neither can be used in moving die parts. "My gut feeling gut feeling Intuition, visceral sensation is that it could be done," says James Rathert, general manager at die maker Genca. "But it would be complex." He notes that moving parts could create pockets where thermoplastics could burn, while silicone doesn't degrade TO DEGRADE, DEGRADING. To, sink or lower a person in the estimation of the public. 2. As a man's character is of great importance to him, and it is his interest to retain the good opinion of all mankind, when he is a witness, he cannot be compelled to disclose in the die. NEED TO KNOW MORE? For more information, enter PT Direct code at www.ptonline.com. Genca, St. Petersburg, Fla. (800) 237-5448 * PT Direct: 257ZK Specialty Silicone Fabricators Inc., Paso Robles, Calif (805) 239-4284 * www.ssfab.com |
|
||||||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion