Molding press systems. (Literature: equipment).Molding press systems for elastomers are featured in this four-page, four-color brochure. The clamp unit is said to feature a robust design with flame hardened, thermally pre-stressed columns. The heavy sliding bolster uses split bronze bushings for easy replacement. Platens are said to feature precise temperature control, even heat distribution and rapid heat up times that are assured through the use of PID (1) (Process IDentifier) A temporary number assigned by the operating system to a process or service. (2) (Proportional-Integral-Derivative) The most common control methodology in process control. controlled electrical cartridge heaters, with individual heat outputs depending on location within the platen. The injection unit is designed for accuracy and easy maintenance, according to according to prep. 1. As stated or indicated by; on the authority of: according to historians. 2. In keeping with: according to instructions. 3. the literature. Both vertical and horizontal injection units come equipped with first in, first out (FIFO (First In First Out) A storage method that retrieves the item stored for the longest time. Contrast with LIFO. See traffic engineering methods. FIFO - first-in first-out ) or standard injection systems. Shot volume is injected against backpressure back·pres·sure n. Residual pressure opposing the free flow of a gas or liquid, as in a pipe or an exhaust system. and metered via a high-resolution linear scale. Designed for durability, efficiency and quiet operation, the hydraulic system Noun 1. hydraulic system - a mechanism operated by the resistance offered or the pressure transmitted when a liquid is forced through a small opening or tube features a direct drive tandem pump, according to this literature. (Dieffenbacher North America, 9495 Twin Oaks Dr., Windsor, Ontario, Canada N8N 5B8) Circle 123 on card |
|
||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion