Mold pre-heaters.Mold pre-heaters for tire curing presses reduce press downtime The time during which a computer is not functioning due to hardware, operating system or application program failure. after mold changing, provide good heat conductivity, feature a standard design for passenger and light truck molds, and offer molds that are independently inserted and removed, according to according to prep. 1. As stated or indicated by; on the authority of: according to historians. 2. In keeping with: according to instructions. 3. the company. These mold preheating stations normally use steam platens, similar to those in the tire press, to pre-heat the top and bottom mold sections before installing the molds in the press. The company can supply single or multiple-station units with the level of automation desired. The two-station unit accommodates molds for up to a 52" dual cavity press. Pneumatic cylinders lift and lower each top platen A long, thin cylinder in a typewriter or printer that guides the paper through it and serves as a backstop for the printing mechanism to bang into. It is typically made of a hard rubber or rubber-like material. See carriage and typewriter. . Each upper assembly rotates independently for easy mold placement and removal, according to the firm. Top platens swivel to meet the plane of the mold and maximize the heat contact area. Outer platen flat surfaces are insulated in·su·late tr.v. in·su·lat·ed, in·su·lat·ing, in·su·lates 1. To cause to be in a detached or isolated position. See Synonyms at isolate. 2. . (Rogers Industrial Products, 532 S. Main St., Akron, OH 44311) Circle 16 on card |
|
||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion