Mold components secure slides & cool faster.Hasco America Inc., Arden, N,C., has introduced two new standard mold components. One is a slides or top-to-bottom slides when the mold is open. The Z189 slide retainer A contract between attorney and client specifying the nature of the services to be rendered and the cost of the services. Retainer also denotes the fee that the client pays when employing an attorney to act on her behalf. has two carbide carbide, any one of a group of compounds that contain carbon and one other element that is either a metal, boron, or silicon. Generally, a carbide is prepared by heating a metal, metal oxide, or metal hydride with carbon or a carbon compound. locking pins and a shoulder screw for installation, Safety varnish varnish, homogeneous solution of gum or of natural or synthetic resins in oil (oil varnish) or in a volatile solvent (spirit varnish), which dries on exposure to air, forming a thin, hard, usually glossy film. on the screw prevents accidental loosening. In testing, the retainer showed no signs of wear after 100,000 movements. The retainer is offered in three sizes with minimum heights of 10, 12, and 16 mm. Hasco also offers new beryllium-free copper-alloy core pins that provide high heat: dissipation. The Z492 Cool Finger pins have heat conductivity 10 times greater than that of steel and can be used to replace cooling lines in areas of difficult access. The pins have a hardness of HB 200, making heat treatment unnecessary, although wear resistance can be increased by adding a surface coating Surface coating A substance applied to other materials to change the surface properties, such as color, gloss, resistance to wear or chemical attack, or permeability, without changing the bulk properties. . The pins are offered in diameters from 4 to 16 mm and in lengths of 160, 250, or 315 mm. Tel: (828) 650-2600, www.hasco.com |
|
||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion