Milking an MMA.Mechanics, over time, moisture and condensation will get inside your AH-64D's mast-mounted assembly (MMA (Microcomputer Managers Association, Inc.) A membership organization with chapters throughout the U.S. that was devoted to educating personnel responsible for personal computers. It disbanded in 1996. Mma - A fast Mathematica-like system, in Allegro CL by R. Fateman, 1991. ). So what do you do? When TM 1-1520-25 I-PMD tells you in Task 8-3 to remove condensation from the MMA, don't don't 1. Contraction of do not. 2. Nonstandard Contraction of does not. n. A statement of what should not be done: a list of the dos and don'ts. assume the TM means for you to open up the MMA to remove condensation. That's an armament task, so if you're not an armament mechanic, leave it to armament folks to do the opening. What you should do is bleed Printing at the very edge of the paper. Many laser printers, including all LaserJets up to the 11x17" 4V, cannot print to the very edge, leaving a border of approximately 1/4". In commercial printing, bleeding is generally more expensive, because wider paper is often used, which is later condensation from the radar by squeezing the two drain plugs that protrude pro·trude v. 1. To push or thrust outward. 2. To jut out; project. on the underside of the dome to release condensation. Always do your 25-hour/14-day scheduled inspection like the--PMD says. |
|
||||||||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion