|
| |
Articles
1-55 out of 55 article(s)
| Title |
Author |
Type |
Date |
Words |
| Creating microstructures on silicon wafers using UV-crosslinked polystyrene thin films. |
Knudsen, Daniel; Harnish, Bernadette; Toth, Ramona; Yan, Mingdi |
Report |
May 1, 2009 |
2240 |
| Axial-Feed thermoforming of oriented polypropylene tubes. |
Elnagmi, Mohamed; Bruhis, Moisei; Jain, Mukesh |
Technical report |
Mar 1, 2009 |
4077 |
| Preparation and morphology of high-performance exfoliated poly(sodium acrylate)/hydrotalcite nanocomposite superabsorbents. |
Zhang, Yatao; Fan, Lihai; Cheng, Lihua; Zhang, Lin; Chen, Huanlin |
Technical report |
Feb 1, 2009 |
4006 |
| Microstructure-thermal property relationship of high trans-1,4-poly (butadiene) produced by anionic polymerization of 1,3-butadiene using an initiator composed of alkyl aluminum, n-butyl lithium, and barium alkoxide. |
Benvenuta-Tapia, Juan J.; Tenorio-Lopez, Jose A.; Herrera-Najera, Rafael; Rios-Guerrero, Leonardo |
Technical report |
Jan 1, 2009 |
6936 |
| A novel two-component physical gel based on interaction between poly(acrylic acid) and 6-deoxy-6-amino-[beta]-cyclodextrin. |
Sun, Song; Chen, Xi; Liu, Jing; Yan, Junlin; Fang, Yu |
Technical report |
Jan 1, 2009 |
2908 |
| Segmentation of 2D AND 3D textures from estimates of the local orientation. |
Jeulin, Dominique; Moreaud, Maxine |
|
Nov 1, 2008 |
4018 |
| Microhybrids of metal powder incorporated in polymeric matrices: friction, mechanical behavior, and microstructure. |
Brostow, Witold; Buchman, Alisa; Buchman, Eli; Olea-Mejia, Oscar |
Technical report |
Oct 1, 2008 |
2798 |
| Microstructure and water vapor transport properties of functionalized carbon nanotube-reinforced dense-segmented polyurethane composite membranes. |
Mondal, S.; Hu, J.L. |
Technical report |
Sep 1, 2008 |
4250 |
| Diffusion-controlled atom transfer radical polymerization with crosslinking. |
Yu, Qiang; Qin, Zhongqiong; Li, Jinchun; Zhu, Shiping |
Technical report |
Jul 1, 2008 |
3610 |
| A novel fabrication route for Auxetic polyethylene, part 2: mechanical properties. |
Webber, R.S; Alderson, K.L; Evans, K.E. |
Technical report |
Jul 1, 2008 |
6013 |
| Local study of defects during sintering of U[O.sub.2]: image processing and quantitative analysis tools. |
Girard, Eric; Chaix, Jean-Marc; Valdivieso, Francois; Goeuriot, Patrice; Lechelle, Jacques |
Report |
Jun 1, 2008 |
2726 |
| Recycled and virgin LDPE as rheology modifiers of lithium lubricating greases: a comparative study. |
Martin-Alfonso, J.E.; Valencia C.; Sanchez, M.C.; Franco, J.M.; Gallegos, C. |
Technical report |
Jun 1, 2008 |
4531 |
| Effects of thermal aging on isotactic polypropylene crystallinity. |
Law, Aaron; Simon, Leonardo; Lee-Sullivan, Pearl |
Technical report |
Apr 1, 2008 |
4004 |
| Effect of annealing and orientation on microstructures and mechanical properties of polylactic acid. |
Yu, Long; Liu, Hongshen; Xie, Fengwei; Chen, Ling; Li, Xiaoxi |
Technical report |
Apr 1, 2008 |
5242 |
| Microdomain composition and properties differences of biodegradable polyurethanes based on MDI and HDI. |
d'Arlas, Borja Fernandez; Rueda, Lorena,; de la Caba, Koro; Mondragon, Inaki; Eceiza, Arantxa |
Author abstract |
Mar 1, 2008 |
6499 |
| Microstructure changes in poly(ethylene terephthalate) in thick specimens under complex biaxial loading. |
Marco, Yann; Chevalier, Luc |
Author abstract |
Mar 1, 2008 |
5445 |
| Structural characterization and mass transfer properties of dense segmented polyurethane membrane: influence of hard segment and soft segment crystal melting temperature. |
Mondal, S.; Hu, J.L. |
Technical report |
Feb 1, 2008 |
4259 |
| Influence of screw profile and extrusion conditions on the microstructure of polypropylene/organoclay nanocomposites. |
Lertwimolnun, W.; Vergnes, B. |
Technical report |
Dec 1, 2007 |
5236 |
| 3-D imaging, analysis and modelling of porous cereal products using x-ray microtomography. |
van Dalen, Gerard; Nootenboom, Peter; van Vliet, Lucas J.; Voortman, Lennard; Esveld, Erik |
|
Nov 1, 2007 |
3893 |
| Effects of waste glass additions on the properties and durability of fired clay brick (1). |
Chidiac, S.E.; Federico, L.M. |
Technical report |
Nov 1, 2007 |
7879 |
| Correlation between different microstructural parameters and tensile modulus of various polyethylene blown films. |
Fatahi, Shokoh; Ajji, Abdellah; Lafleur, Pierre G. |
|
Sep 1, 2007 |
6600 |
| Microstructural characterization of polymeric materials by small angle neutron scattering. |
Rogante, Massimo; Lebedev, Vassili T. |
Technical report |
Aug 1, 2007 |
4371 |
| Embossing of high-aspect-ratio-microstructures using sacrificial templates and fast surface heating. |
Lu, Chunmeng; Cheng, Mark Ming-Cheng; Benatar, Avraham; Lee, L. James |
|
Jun 1, 2007 |
4373 |
| A two-station embossing process for rapid fabrication of surface microstructures on thermoplastic polymers. |
Yao, Donggang; Nagarajan, Pratapkumar; Li, Lei; Yi, Allen Y. |
|
Apr 1, 2007 |
4658 |
| Microstructure-properties correlations in dynamically vulcanized nanocomposite thermoplastic elastomers based on PP/EPDM. |
Naderi, Ghasem; Lafleur, Pierre G.; Dubois, Charles |
|
Mar 1, 2007 |
5147 |
| Visualization analysis of the filling behavior of melt into microscale V-grooves during the filling stage of injection molding. |
Han, X.; Yokoi, H. |
|
Nov 1, 2006 |
4739 |
| Accuracy and mechanical properties of multiparts produced in one mold in microinjection molding. |
Huang, C.K.; Chen, S.W.; Yang, C.T. |
|
Nov 1, 2005 |
4031 |
| Latex produced with carboxylic acid comonomer for waterborne coatings: particle morphology variations with changing pH. |
Sundberg, Donald |
|
Jul 1, 2005 |
4957 |
| Microstructure and morphology of amine-cured epoxy coatings before and after outdoor exposures--an AFM study. |
Jean, Y.C. |
|
Jul 1, 2005 |
6460 |
| Fundamental parameters line profile fitting in laboratory diffractometers. |
Cline, J.P. |
|
Jan 1, 2004 |
14131 |
| Elasticity at large deformations and high strain rates in injection molded polypropylene. |
Dijkstra, P.T.S.; Gaymans, R.J.; Van Dijk, D.J.; Huetink, J. |
|
Sep 1, 2003 |
4625 |
| USAXS imaging used to study artificial tissue scaffolds. (General Developments). |
|
Brief Article |
Mar 1, 2003 |
179 |
| Study: ten most attractive markets for MEMS/MST devices. |
|
|
Mar 1, 2003 |
285 |
| Effect of process conditions on the weld-line strength and microstructure of microcellular injection molded parts. |
Turng, Lih-sheng; Kharbas, Hrishikesh |
|
Jan 1, 2003 |
5100 |
| Replication of sub-micron features using amorphous thermoplastics. |
Monkkonen, Kari; Hietala, Joni; Paakkonen, Pertti; Paakkonen, Esko J.; Kaikuranta, Terho; Pakkanen, |
|
Jul 1, 2002 |
3676 |
| The Visible Cement Data Set. |
Baruchel, Jose |
|
Mar 1, 2002 |
4630 |
| Metallic materials made to order. (Materials Science). |
|
Brief Article |
Jan 26, 2002 |
252 |
| Neutron methods link microstructure to processing and performance for thermal barrier coatings. (News Briefs). |
|
Brief Article |
Jan 1, 2002 |
319 |
| Microstructural effects on hot drawing syndiotactic styrene p-m ethyl styrene copolymer. |
Yan, R. J.; Ajji, A.; Shinozaki, D. M. |
|
Oct 1, 2001 |
4842 |
| Effect of Poly(acrylic acid)-g-PCL Microstructure on the Mechanical Properties of Starch/PCL Blend Compatibilized With Poly(acrylic acid)-g-PCL. |
KIM, CHANG-HYEON; CHO, KUK YOUNG; PARK, JUNG-KI |
|
Mar 1, 2001 |
4927 |
| Effects of SBS on Phase Morphology of iPP/aPS Blends. |
SMIT, I.; RADONJIC, G. |
|
Oct 1, 2000 |
8022 |
| Microstructure and properties of random heterogeneous materials: a review of theoretical results. |
Quintanilla, J. |
|
Mar 1, 1999 |
14445 |
| Effects of solvent-particle interaction kinetics on microstructure formation during three-dimensional printing. |
Wu, Benjamin M.; Cima, Michael J. |
|
Feb 1, 1999 |
4582 |
| Microstructure and stiffness analysis of a new ternary melamine-formaldehyde composite. |
Hagstrand, P.-O.; Rychwalski, R.W.; Klason, C. |
|
Aug 1, 1998 |
6396 |
| Solidification of a macroscopic part. |
Charbon, Christian; Swaminarayan, Sriram |
|
Apr 1, 1998 |
8099 |
| Microindentation testing of inhomogeneous microstructures in welded polyethylene. |
Lu, Y.; Shinozaki, D.M. |
|
Nov 1, 1997 |
5429 |
| Microstructure transformation and stress-strain behavior of isotactic polypropylene under large plastic deformation. |
G'sell, C.; Dahoun, A.; Favier, V.; Hiver, J.M.; Philippe, M.S.; Canova, G.R. |
|
Oct 1, 1997 |
4841 |
| Study of mechanical damage in rubber-toughened poly(methyl methacrylate) by single and multiple scattering of light. |
Schirrer, R.; Lenke, R.; Boudouaz, J. |
|
Oct 1, 1997 |
5692 |
| Evolution of the microstructure and mechanical properties of polyamide 6 during impact. |
Billon, N.; Haudin, J.M. |
|
Oct 1, 1997 |
4609 |
| Crystallization and microstructure in quenched slabs of various molecular weight polypropylenes. |
Isayev, A.I.; Catignani, B.F. |
|
Sep 1, 1997 |
6888 |
| Dynamic simulation of microstructure and rheology of fiber suspensions. |
Yamamoto, Satoru; Matsuoka, Takaaki |
|
Oct 15, 1996 |
3102 |
| Optical properties of extruded polyethylene thin films related to anisotropy and inhomogeneous microstructure. |
Bernabeu, E.; Boix, J.M. |
|
May 15, 1996 |
3235 |
| Factors influencing microstructure formation in polyblends containing liquid crystalline polymers. |
He, Jiasong; Bu, Wensheng; Zhang, Hongzhi |
|
Nov 15, 1995 |
3609 |
| Tiny structures molded in capillaries. |
Lipkin, R. |
Brief Article |
Aug 19, 1995 |
485 |
| Microstructure anomalies affect ductile iron properties. |
Goodrich, George M. |
|
Dec 1, 1994 |
420 |
|
