|
| |
Articles
1-75 out of 75 article(s)
| Title |
Author |
Type |
Date |
Words |
| A real-time process optimization system for injection molding. |
Li, Dequn; Zhou, Huamin; Zhao, Peng; Li, Yang |
Technical report |
Oct 1, 2009 |
5457 |
| A new explicit simulation for injection molding and its validation. |
Cheng, Zhiqiang; Barriere, Thierry; Liu, Baosheng; Gelin, Jean-Claude |
Report |
Jun 1, 2009 |
6231 |
| Simulation of phase-change heat transfer during cooling stage of gas-assisted injection molding of high-density polyethylene via enthalpy transformation approach. |
Yang, Bin; Fu, Xiao-Rong; Yang, Wei; Liang, Shui-Po; Hu, Shen; Yang, Ming-Bo |
Report |
Jun 1, 2009 |
5918 |
| The effect of injection molding conditions on the morphology of polymer structural foams. |
Barzegari, M. Reza; Rodrigue, Denis |
Report |
May 1, 2009 |
7643 |
| Structure and property of injection-molded polypropylene along the flow direction. |
Yu, Xiaofeng; Wu, Hong; Li, Jiang; Guo, Shaoyun; Qiu, Jianhui |
Report |
Apr 1, 2009 |
4760 |
| Study of application of ultrasonic wave to injection molding. |
Sato, Atsushi; Ito, Hiroshi; Koyama, Kiyohito |
Report |
Apr 1, 2009 |
2359 |
| The stress relaxation behavior and mechanical properties of polypropylene and polypropylene/CaC[O.sub.3] in mechanical vibration injection molding. |
Lu, Ying; Peng, Huan; Shen, Kai-Zhi; Yan, Zheng |
Technical report |
Mar 1, 2009 |
3855 |
| Rapid thermal cycling with low thermal inertia tools. |
Xu, Ronald X.; Sachs, Emanuel |
Technical report |
Feb 1, 2009 |
7413 |
| Preparation of nanocomposites based on PP and PA6 by direct injection molding. |
Frache, Alberto; Monticelli, Orietta; Ceccia, Simona; Brucellaria, Alessandro; Casale, Antonio |
Technical report |
Dec 1, 2008 |
4968 |
| Injection molding of a diffractive optical element. |
Tofteberg, Terje; Amedro, Helene; Andreassen, Erik |
Technical report |
Nov 1, 2008 |
5367 |
| The development and characterization of polymer microinjection molded gratings. |
Angelov, A.K.; Coulter, J.P. |
Technical report |
Nov 1, 2008 |
4009 |
| A simplified approach to predict part temperature and minimum "safe" cycle time. |
Hioe, Yunior; Chang, Keh-Chyou; Zuyev, Konstantin; Bhagavatula, Narayan; Castro, Jose M. |
Technical report |
Sep 1, 2008 |
4354 |
| Three-dimensional simulation of primary and secondary penetration in a clip-shaped square tube during a gas-assisted injection molding process. |
Chau, Shiu-Wu |
Technical report |
Sep 1, 2008 |
9314 |
| Pressure and temperature behavior of thermoplastic polymer melts during high-pressure expansion injection molding. |
Rogelj, Saso; Krajnc, Matjaz |
Technical report |
Sep 1, 2008 |
5542 |
| Multiscale roughness analysis in injection-molding process. |
Bigerelle, Maxence; Gorp, Van Adrien; Lost, Alian |
Technical report |
Sep 1, 2008 |
6221 |
| Detecting crystallization structure evolution of polypropylene injection-molded bar induced by nucleating agent. |
Bai, Hongwei; Wang, Yong; Song, Bo; Li, Yanli; Liu, Li |
Technical report |
Aug 1, 2008 |
5275 |
| Numerical and experimental investigation of shrinkage behavior of precision injection molded articles. I. Development of lateral motion modeling. |
Yang, Sang Sik; Kwon, Tai Hun |
Technical report |
Aug 1, 2008 |
8818 |
| Numerical and experimental investigation of shrinkage behavior of precision injection molded articles. II. Results and Discussion. |
Yang, Sang Sik; Kwon, Tai Hun |
Technical report |
Aug 1, 2008 |
6147 |
| Luminance of injection-molded V-groove light guide plates. |
Lin, T.H; Isayev, A.I.; Mehranpour, M. |
Technical report |
Aug 1, 2008 |
3770 |
| Effect of viscous dissipation on the temperature of the polymer during injection molding filling. |
Hassan, Hamdy; Regnier, Nicolas; Pujos, Cyril; Defaye, Guy |
Technical report |
Jun 1, 2008 |
3395 |
| Effect of molecular weight and molding conditions on the replication of injection moldings with micro-scale v-groove features. |
Murakami, Osamu; Kotaki, Masaya; Hamada, Hiroyuki |
Author abstract |
Apr 1, 2008 |
3509 |
| Local thermo-oxidative degradation in injection molding. |
Schmiederer, Dirk; Gardocki, Aleksander; Kuhnert, Ines; Schmachtenberg, Ernst |
Technical report |
Apr 1, 2008 |
3454 |
| Determination of different morphological structures in PC/ABS open spiral injection moldings. |
O-Charoen, N.; Leong, Y.W.; Hamada, H. |
Technical report |
Apr 1, 2008 |
3460 |
| Experimental investigation of key parameters on the effects of cavity surface roughness in microinjection molding. |
Zhang, H.L.; Ong, N.S.; Lam, Y.C. |
Author abstract |
Mar 1, 2008 |
2788 |
| Fiber orientation in injection molding with rotating flow. |
Silva, Cristina A.; Viana, Julio C.; van Hattum, Ferrie W.J.; Cunha, Antonio M. |
Technical report |
Feb 1, 2008 |
3332 |
| Effects of surface roughness on microinjection molding. |
Zhang, H.L.; Ong, N.S.; Lam, Y.C. |
Technical report |
Dec 1, 2007 |
4334 |
| Ultrasonic measurement of residual wall thickness during gas assisted injection molding. |
Brown, E.C.; Mulvaney-Johnson, L.; Coates, P.D. |
Technical report |
Nov 1, 2007 |
5993 |
| Injection molding quality control by integrating weight feedback into a cascade closed-loop control system. |
Chen, Zhongbao; Turng, Lih-Sheng |
|
Jun 1, 2007 |
5427 |
| Process optimization of injection molding using an adaptive surrogate model with Gaussian process approach. |
Zhou, Jian; Turng, Lih-Sheng |
|
May 1, 2007 |
6034 |
| Approximate prediction of gas core geometry in gas assisted injection molding using a short cut method. |
Polynkin, A.; Pittman, J.F.T.; Sienz, J. |
|
May 1, 2007 |
3511 |
| Multiple criteria optimization with variability considerations in injection molding. |
Castro, Carlos E.; Rios, Mauricio Cabrera; Castro, Jose M.; Lilly, Blaine |
|
Apr 1, 2007 |
7064 |
| High-frequency proximity heating for injection molding applications. |
Yao, Donggang; Kimerling, Thomas E.; Kim, Byung |
|
Jul 1, 2006 |
5285 |
| Gas assisted injection molding of a handle: three-dimensional simulation and experimental verification. |
Polynkin, A.; Pittman, J.F.T.; Sienz, J. |
|
Aug 1, 2005 |
6097 |
| Rheology studies of polyethylene/chemical blowing agent solutions within an injection molding machine. |
Qin, X.; Thompson, M.R.; Hrymak, A.N.; Torres, A. |
|
Aug 1, 2005 |
5674 |
| Ejection force of tubular injection moldings. Part II: a prediction model. |
Pontes, A.J.; Pouzada, A.S.; Pantani, R.; Titomanlio, G. |
|
Mar 1, 2005 |
4294 |
| Shear-induced migration of conductive fillers in injection molding. |
Hong, Chang-Min; Kim, Jongdae; Jana, Sadhan C. |
|
Nov 1, 2004 |
4690 |
| Sequential injection overmolding of an elastomeric ethylene-octene copolymer on a polypropylene homopolymer core. |
Arzondo, L.M.; Pino, N.; Carella, J.M.; Pastor, J.M.; Merino, J.C.; Poveda, J.; Alonso, C. |
|
Nov 1, 2004 |
4052 |
| Rheological properties of injection molded LDPE and mPE foams. |
Chen, Xue; Heuzey, Marie-Claude; Carreau, Pierre J. |
|
Nov 1, 2004 |
4451 |
| Injection molding for interiors--including fabrics: plenty of interior components are injection molded. But some companies--such as VW--are using a process for trim pieces that both mold a component and cover it in fabric in a single molding process. And it is coming to the U.S. in the not-too-distant future. |
Vasilash, Gary S. |
|
Sep 1, 2004 |
802 |
| 'Soft-on-soft' is newest option in soft-touch molding. (Injection Molding). |
Leaversuch, Robert |
|
Oct 1, 2002 |
564 |
| Blends of a bottle-grade polyethylene terephthalate copolymer with a liquid crystalline polymer. Part II: thermal and transport properties. |
Silva, L.B. Da; Marinelli, A.L.; Ruvolo-Fileho, A.; Bretas, R.E.S. |
|
Aug 1, 2002 |
7969 |
| The Design of Conformal Cooling Channels in Injection Molding Tooling. |
XU, XIAORONG; SACHS, EMANUEL; ALLEN, SAMUEL |
|
Jul 1, 2001 |
8513 |
| Visual Analysis of Cavity Filling and Packing Process in Injection Molding of Thermoset Phenolic Resin by the Gate-Magnetization Method. |
OHTA, TAKASHI; YOKOI, HIDETOSHI |
|
May 1, 2001 |
4287 |
| Modeling of Structural Reaction Injection Molding Process. I. Mathematical Model. |
MALKIN, ALEXANDER YA.; KUZNETSOV, VICTOR V. |
|
May 1, 2001 |
4336 |
| Numerical Simulation of Moving Free Surface Problems in Polymer Processing Using Volume-of-Fluid Method. |
KIM, JU MIN; AHN, KYUNG HYUN; LEE, SEONG JAE; LEE, SEUNG JONG |
|
May 1, 2001 |
3972 |
| Crystallization of Poly(ethylene terephthalate) and Poly(butylene terephthalate) Modified by Diamides. |
BOUMA, KRISTA; GAYMANS, REINOUD J. |
|
Mar 1, 2001 |
5276 |
| Weldline Morphology of Injection Molded Modified Poly(phenylene-oxide)/Polyamide-6 Blends. |
SON, YOUNGGON; AHN, KYUNG HYUN; CHAR, KOOKHEON |
|
Mar 1, 2001 |
3276 |
| Crystallinity and Microstructure in Injection Moldings of Isotactic Polypropylenes. Part II: Simulation and Experiment. |
GUO, X.; ISAYEV, A. I.; DEMIRAY, M. |
|
Nov 1, 1999 |
6498 |
| Investigation of Wave-like Flow Marks in Injection Molding: Flow Visualization and Micro-Geometry. |
TREDOUX, LOUIS; SATOH, ISAO; KUROSAKI, YASHUO |
Statistical Data Included |
Nov 1, 1999 |
4878 |
| Postfilling Analysis of Viscoelastic Polymers With Internal Structure Parameter. |
HUANG, XIAHONG; ZHOU, CHIXING |
|
Nov 1, 1999 |
5100 |
| Cycle-to-Cycle and Within-Cycle Adaptive Control of Nozzle Pressure During Packing-Holding for Thermoplastic Injection Molding. |
Yang, Yi; Gao, Furong |
Statistical Data Included |
Oct 1, 1999 |
5337 |
| An unsteady multifluid flow model: application to sandwich injection molding process. |
Schlatter, G; Agassant, J.F.; Davidoff, A.; Vincent, M. |
|
Jan 1, 1999 |
4613 |
| Controlled orientation of reflective pigment and optical property characterization of injection-molded polypropylene. |
Rawson, Keith W.; Allan, Peter |
|
Jan 1, 1999 |
3295 |
| Clean cooling water clears up molding problems. |
De Gaspari, John |
|
Nov 1, 1998 |
1238 |
| Optimal cooling system design for the injection molding process. |
Park, S.J.; Kwon, T.H. |
|
Sep 1, 1998 |
5655 |
| Optimizing barrel heat profiles: it shouldn't be a mystery. |
Davis, Martin |
|
Jun 1, 1998 |
1142 |
| Lost-core molding: don't count it out yet. |
Ogando, Joseph |
|
Sep 1, 1997 |
1117 |
| Pattern-based closed-loop quality control for the injection molding process. |
Woll, Suzanne L.B.; Cooper, Douglas J. |
|
May 1, 1997 |
5933 |
| 50 ways to cut your injection molding cycle time. |
Ogando, Joseph |
Cover Story |
Apr 1, 1997 |
3446 |
| On-line ultrasonic monitoring of the injection molding process. |
Wang, H.; Cao, B.; Jen, C.K.; Nguyen, K.T.; Viens, M. |
|
Feb 1, 1997 |
6498 |
| Reaction injection molding: analyzing the filling stage of a complex product with a highly viscous thermoset. |
Haagh, G.A.A.V.; Peters, G.W.M.; Meijer, H.E.H. |
|
Oct 1, 1996 |
4753 |
| In-mold textile laminating gives boost to injection-compression. |
Ogando, Joseph |
|
Apr 1, 1996 |
1354 |
| Reaction injection molding process. |
Kim, Dae Su; Kim, Sung Chul |
|
Apr 15, 1995 |
5170 |
| How to injection mold metallocene polyolefins. |
Moldovan, Dan |
|
Apr 1, 1995 |
1868 |
| Guidelines for trouble-free gas-assist molding. |
Ogando, Joseph |
|
Mar 1, 1995 |
2088 |
| Gas-injection molding: 'black art' or science? |
De Gaspari, John |
|
Apr 1, 1994 |
3679 |
| Troubleshooting problems with mold releases. |
Hillman, Stephen J. |
|
Aug 1, 1993 |
2094 |
| Practical techniques of injection molding. |
Graham, Timothy R. |
Column |
Jul 1, 1993 |
1688 |
| RTM hot tools drive the push for speed. |
Monks, Richard |
|
Mar 1, 1993 |
2801 |
| Novel injection molding techniques move toward commercialization. |
De Gaspari, John |
|
Oct 1, 1992 |
1359 |
| Large injection presses combine rigid clamping & long strokes. |
De Gaspari, John |
|
Feb 1, 1992 |
882 |
| New technique permits fast, ultra-thin-wall molding. |
De Gaspari, John |
|
Dec 1, 1991 |
734 |
| Close-up on 'lost-core': a puzzle with many pieces. |
Schut, Jan H. |
|
Dec 1, 1991 |
4283 |
| Injecting liquid silicones. |
Menough, Jon |
|
Aug 1, 1991 |
1724 |
| Injection molding thermoplastic elastomers. |
Hudson, John A. |
|
Jul 1, 1989 |
2179 |
|
