Metallocene VLDPE is a tough new contender for flexible packaging. (Materials).* A new metallocene catalyzed, very-low-density polyethlyene (mVLDPE) from ExxonMobil Chemical Co., Houston, reportedly offers the excellent toughness associated with mLLDPE plus lower heat-seal temperatures and other advantages over conventional Ziegler-Natta VLDPEs or ULDPEs for flexible packaging.Produced with Exxpol catalyst technology in a gas-phase process plant at Mont Belvieu, Texas Mont Belvieu is a city in Chambers County, Texas, United States. It is just north of Interstate 10 along State Highway 146. The population was 2,324 at the 2000 census. Geography Mont Belvieu is located at (29.860242, -94. , new Exceed 1012CA has a density of 0.912 g/cc and MI of 1.0. It is aimed at monolayer mon·o·lay·er n. 1. A film or layer one molecule thick formed at the interface between water and either oil or air by a substance such as a partially esterified fatty acid that contains both hydrophobic and hydrophilic groups in the same and multi-layer flexible packaging for meat and dairy products dairy products dairy npl → produits laitier dairy products dairy npl → Milchprodukte pl, Molkereiprodukte pl , snacks, prepared convenience foods, and frozen foods. Other potential uses include industrial packaging such as heavy-duty sacks and impact modification of other resins. Sealing, impact, opticals In monolayer blown films, Exceed 1012CA mVLDPE has been shown to outshine out·shine v. out·shone , out·shin·ing, out·shines v.tr. 1. a. To shine brighter than. b. To be more beautiful, splendid, or flamboyant than. 2. monolayer conventional LLDPE LLDPE Linear Low Density Polyethylene and ULDPE ULDPE Ultra Low Density Polyethylene , as well as mLLDPE and plastomers in sealing performance (see graph on next page). The comparison includes LL3001, a 1-MI, 0.918-g/cc hexene LLDPE from ExxonMobil; Exceed 1018C, a 1-MI, 0.918-g/cc mLLDPE from ExxonMobil; Mxsten CM77075, a 0.5 MI, 0.9065-g/cc enhanced hexene LLDPE from Eastman; Attane 4201, a 1-MI, 0.912-g/cc ULDPE from Dow Plastics; and Affinity 1880, a 1-MI, 0.910-g/cc metallocene plastomer from Dow. Tests show that Exceed 1012CA mVLDPE has both the lowest seal-initiation temperature and the broadest hot-tack window, along with excellent hot-tack strength. With mVLDPE, fabricators/converters can use substantially lower film sealing temperatures (down to 185 F), which results in faster sealing line speeds. The new grade also boasts dart impact three times that of conventional VLDPE VLDPE Very Low Density Polyethylene , along with exceptional puncture resistance (see graphs below). As a result, film produced with it can be significantly downgauged, providing an economical alternative for poultry and meat packaging applications, according to ExxonMobil. Exceed 1012CA also boasts better low-temperature impact performance for frozen-food packaging. In addition, the excellent haze and gloss properties of Exceed 1012CA are advantages for retail displays and barcode scanning of packages. These properties can be improved substantially with the addition of only 5% to 10% LDPE LDPE abbr. low-density polyethylene . A comparison of Exceed 1012CA and Attane 4201 showed that though the ULDPE by itself has lower haze and higher gloss, adding 10% of either of two ExxonMobil LDPEs (7.5 and 0.75 MI) produced higher clarity and gloss with Exceed 1012CA than with Attane 4201. The two "spider" graphs on the previous page compare Exceed 1012CA with Attane 4201 and Mxsten CM77075. The mVLDPE is shown to surpass the Attane grade in dart impact, puncture resistance, low-temperature toughness, and seal-initiation temperature. It also outperforms the Mxsten grade in all of those same properties, as well as haze value. *34* [Graph omitted] |
|
||||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion