Measure foam rise & cure with one instrument. (Keeping Up with Urethanes).A sensor that combines dielectric dielectric (dī'ĭlĕk`trĭk), material that does not conduct electricity readily, i.e., an insulator (see insulation). A good dielectric should also have other properties: It must resist breakdown under high voltages; it should not cure monitoring of PUR foams with traditional foam-rise test methods is the newest addition to the Fomat Foam Qualification System from Germany's Format Messtechnik GmbH. The system is available here from Electrotech Industrial, Inc., Sagamore Hills Sagamore Hills can refer to:
Standard foam-testing methods measure the foam's rise height, pressure, and temperature, but not its state of cure directly. Dielectric polarization measurement gives insight into the foam curing process. The new Curing Monitor Device (CMD CMD cerebromacular degeneration. ) consists of comb-shaped electrodes on a circuit board, forming a plane capacitor. The CMD sensor is mounted on the base plate of the Fomat foam-pressure-measurement (FPM FPM - Fast Page Mode Dynamic Random Access Memory ) device. As the CMD is completely covered by the liquid mixture, polarization data are obtained from the very beginning of the foaming process. Electrotech Industrial: (330) 468-3385 |
|
||||||||||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion