Market prices effective mid-July (a).

Market Prices Effective Mid-July (a)

RESIN                                     cent/
GRADE (b)                 cents/LB      CU IN (c)

ABS
  MED IMPACT            80-90            3.0-3.4
  HI IMPACT             85-125           3.2-4.7
  X-HI IMPACT           95-140           3.6-5.3
  HI HEAT               85-110             3.8
  PIPE                  85-110           3.2-4.1
  SHEET                 90-110           3.4-4.2
  TRANSPARENT           125-165          4.9-6.4
  FITTINGS              85-115           3.2-4.3
  PLATING               95-105           3.5-3.9
  FLAME RET             120-140          4.6-5.9
  STRUCT FM             83-97            3.6-4.3
  10% GLASS             125-140          5.0-5.6
  30% GLASS             116-136          5.3-6.3
ABS/PC ALLOY            145-180          5.5-6.8
ABS/PVC ALLOY           130-135          5.8-6.1
ABS/NYLON ALLOY         190                7.3

ACETAL
  HOMOPOL               148-165          7.5-8.4
  20% GLASS             168-228         8.5-11.5
  COPOLYMER             141-153          7.1-7.7
  25% GLASS             168-240          8.5-12
                                       [up arrow]

ACRYLIC
  G-P                   117                5.0
  IMPACT                192                8.2

ACRYLONITRILE COPOL
  EXTRUSION             78-110           3.3-4.7
  INJECTION             130-191          5.4-7.9

ALKYD                   65-74            4.9-5.5

CELLULOSICS
  ACETATE               187                8.6
  CAB                   189                8.2
  CAP                   189                8.2

DAP (G-P)               251-497         16.3-34.7

EPOXY
  G-P RESIN             116-126          NA (d)
  COMPOUNDS
  C/B/T (e)             123-166         9.4-12.9
  R/C/D (f)             208-271         15.3-20.1
  SEMICONDUCTOR
    NOVOLAC             193-228         13.1-15.9
    ANHYDRIDE           188-268         13.9-19.2

EVA
  INJECTION             46-52            1.5-1.7
  FILM EXTRU            42-49            1.4-1.6

EVOH                    265               11.3

FLUORO-
POLYMER
  CTFE                  2500-5500        193-424
  ECTFE                 1470-1680      93.1-107.7
  ETFE                  1155-1680      70.7-102.8
  FEP                   971-1470       74.8-113.2
  PFA                   1785-2520      134.9-190.5
  PTFE                  450-900         34.8-69.7
  PVDF                  680-900         43.3-57.3

IONOMER
  PACKAGING             127-166          4.3-6.0
  INDUSTRIAL            150-244          5.0-8.3

LIQUID-
CRYSTAL
POLYMERS
  INJECTION
  MIN FILLED            690-1035        44.2-72.1
  GLASS FILLED          695-895           40-52
  CARBON FILLED         1700-2000      83.2-138.6
  UNFILLED              1000-1200         58-70
  EXTRUSION
  UNFILLED              1200-2200      60.5-110.9

MELAMINE
COMPOUND                90-94            5.5-5.6
MELAMINE/
PHENOLIC
COMPOUND                75-83            4.5-5.0

NYLON
    TYPE 6              139-159          5.7-6.5
    MIN FILLED          131-144          5.4-5.9
    30% GLASS           148-173          6.0-7.0
  TYPE 66               153-168          6.3-6.9
    MIN FILLED          151-159          6.2-6.5
    30% GLASS           142-192          5.8-7.9
  TYPE 69               250-276         9.7-10.7
  TYPE 6/10             286-313         12.4-13.6
  TYPE 612              400               15.3
    30% GLASS           309-311           14.7
    40% GLASS           309               14.7
  TYPE 46               295               12.6
  TYPE 11               329-341         13.6-14.1
    30% GLASS           331-350         15.0-15.8
    40% GLASS           347-360         17.7-18.5
  TYPE 12               318-341         12.1-13.0
    30% GLASS           327-350         14.7-15.8
    50% GLASS           299-340         15.6-17.8
  TRANSPARENT
  AMORPHOUS             247-360         10.3-15.0

PHENOLIC
MOLD COMP               75                 3.8
  REINFORCED
  GRADES                105-268          6.1-16

POLYAMIDE-
IMIDE (g)
  UNFILLED              2750              148.5
  30% GLASS             2500               135
  30% CARBON FIB.       3500               185

POLYARYLATE             200-280         8.8-12.3

POLYARYL-
SULFONE                 440               21.8

POLYETHYLENE
G-P                     94-96              3.1
FILM                    88-91              2.9
PIPE
  COLD WATER            116-120          3.9-4.0
  HOT WATER             162-166          5.5-5.6

POLYCARBONATE
  INJECTION             138-165          5.9-7.0
    20% GLASS           177-190          7.6-8.2
    30% GLASS           178-217          7.6-9.3
    EXTRUSION           145-180          6.3-7.8
    BLOW MOLD           155-190          6.7-8.2
    STRUCT FOAM         149-181          6.4-7.8
      20% GLASS         235-255         10.1-11.0
    FR                  166-197          7.1-8.5
    CD                  140-200          6.0-8.6

POLYESTER (TP)
  PBT TYPE
    UNFILLED            143-150            6.9
    HI-IMP              154-165            7.6
    30% GLASS, FR       185-207           11.9
    STRUCT FOAM         159-165          NA (d)

PET
    BOTTLE (RAILCAR)    86-91            4.3-4.6
  MOD PET
    30% GLASS           132-143            7.4
    55% GLASS           148-155            9.8
    30% GLASS,
      FLAME RET         147-157            9.2
    PETG COPOL          114-124          5.2-5.6

POLYESTER
  THERMOSET
    G-P ORTHO           135-140          NA (d)
    ISOPHTHALIC         160-170          NA (d)
    BIS-A               205-210          NA (d)

PEEK                    4400               231
  30% GLASS             3300               173

POLYETHERIMIDE          641-646         29.3-29.5
  30% GLASS             526-531         24.0-24.2

POLYETHER-
  KETONE (PEK)          2950              130.1
    30% GLASS           2600               153

POLYETHER-
  SULFONE               350-400         17.2-19.7
    30% GLASS           425-525          21-25.9

POLYETHYLENE
(RAILCAR)
LDPE
  G-P MOLDING
    & EXTRU             89-91            2.9-3.0
  INJECTION             91-93            3.0-3.1
    LID RESIN           92-94              3.1
    LINER               87-89              2.9
  CLARITY               84-86              2.8
  EXTRU COATG           88-90            2.9-3.0
  BLOW MOLD             92-94             3.1

LLDPE,
BUTENE-
BASED
  G-P MOLDING           76-78            2.5-2.6
  FILM                  78-80              2.6
  LME 30-DAY (j)       55.5               1.9
                        [down
                        arrow]
  ROTOMOLD              80-82            2.6-2.7

LLDPE,
HAO-BASED
  G-P MOLDING           79-81            2.6-2.7
  LID RESIN             89-91            2.9-3.0
  LINER FILM            83-85            2.7-2.8

HDPE
  G-P INJ MOLD          76-78            2.6-2.7
  FILM                  84-86            2.8-2.9
  BLOW MOLD             78-80            2.7-2.8

HMW-HDPE
BLOW MOLDING            83-85            2.8-2.9
FILM                    85-87              2.9
PIPE                    90-92              3.1
UHMW-PE                 100-125          3.6-3.7

PPE/PPO-
BASED RESIN
  INJECTION             180                6.8
  20% GLASS (h)         283               12.3
  30% GLASS (h)         291               13.3
  EXTRUSION (h)         242                9.2
  STRUCT FM             231              NA (d)

PPS
  40% GLASS             357-404         21.2-24.0
  55% GLASS/
    MINERAL             289-310         20.8-22.3
  65% GLASS/
    MINERAL             226-273         15.5-18.7

POLY-PROPYLENE
(RAILCAR)
  G-P HOMOPOL
  INJECTION             80-82            2.6-2.7
    LME 30-DAY (j)      55.1               1.8
                        [up arrow]
  EXTRUSION
    FIBER               78-80            2.5-2.6
  PROFILES              84-86            2.7-2.8
  RANDOM COPOL
    BLOW MOLDING        85-87              2.8
  FILM                  84-86            2.7-2.8
    INJECTION           82-84              2.7
  IMPACT COPOL
    MED IMP             93-95            3.0-3.1
    HI IMP              96-98            3.1-3.2

POLYSTYRENE
  (RAILCAR)
  G-P CRYSTAL           66-74            2.5-2.8
    HI HEAT             69-77            2.6-2.8
  HIPS                  67-74            2.5-2.8
    SUPER HI IMP        77-83            2.6-3.1
    FR                  85-93            3.2-3.5
    STRUCT FM (FR)      105-108            NA

EPS

  UNMODIFIED            85-88            NA (d)
  MODIFIED              86-90            NA (d)

POLYSULFONE             569                25
10% GLASS               669                32
30% GLASS               609                20

POLYURETHANE (TP)
  ESTER TYPE            185-255           8-11
  ETHER TYPE            245-295          10.6-13

PU
ISOCYANATES (i)
  POLYMERIC MDI         118-135          NA (d)
  80/20 TDI             145-155          NA (d)

PVC RESIN
(RAILCAR)
  G-P HOMOPOL           53-55            NA (d)
  PIPE                  50-52            NA (d)
  FILM                  61-64            NA (d)
  COPOLYMER
    FLOORING            71-73            NA (d)
  DISPERSION
    HOMOPOLY            84-90            NA (d)
    COPOLYMER           89-93            NA (d)
  CPVC PIPE
    COMPOUND            119              NA (d)

PVDC
EXTRUDABLE              162              NA (d)

SILICONES
  MOLD. COMP.           581-640         38.1-39.3
  SPECIALTY GR.         891-3148         NA (d)
  SILICONE/EPOXY        339-343         22.5-22.8

STYRENE-
ACRYLIC                 108-112          3.7-4.0

SAN (G-P)               66-74            2.5-2.8

STYRENE
MALEIC
ANHYDRIDE

G-P                     110-115          4.2-4.3
HI IMP                  130-140          4.2-4.5
FR                      175-183          6.7-7.0

TP ELASTOMERS
  OLEFINIC              70-76              2.4
  POLYAMIDE             287-337         10.4-12.3
  POLYESTER             200-310         8.8-13.6
  STYRENIC              83-237           2.9-8.3

UREA MOLDING
COMPOUND
  BLACK & BROWN         76                 3.8
  WHITE & IVORY         81                 4.0

VINYL ESTER
  COR RES               208-220          NA (d)
                        [up arrow]
  HEAT & COR RES        233              NA (d)
                        [up arrow]

KEY: Colored areas indicate pricing activity.
An arrow (') indicates direction of price change.
(a) Truckload, unless otherwise specified.
(b) Unfilled, natural color, unless otherwise specified.
(c) Based on typical or average density. (d) Not applicable.
(e) Novolac and anhydride grades for coils, bushings,
transformers. (f) Novolac and anhydride grades for
resistors, capacitors, diodes. (g) in quantities of 20,000
lb. (h) 19,800-lb load. (i) Prices include benzene surcharge.
(j) LME 30-day futures contract for lots of 54,564 lb.