Printer Friendly

Machining projects.


Machining projects.

Averyt, David O.



180 pages




As a supplement to Machining fundamentals, this workbook provides 47 competency development activities for learning to perform machining operations on the bench, lathe lathe (lāth), machine tool for holding and turning metal, wood, plastic, or other material against a cutting tool to form a cylindrical product or part. It also drills, bores, polishes, grinds, makes threads, and performs other operations. , and vertical mill. Advanced projects walk through creating a gravity center punch center punch
A tool with a sharp point used in metalworking to mark centers or center lines on pieces to be drilled.

Noun 1.
, lathe puzzle, meat tenderizing tenderizing

natural tenderizing is caused by the action of enzymes already in tissues. This effect can be enhanced by quick freezing before rigor mortis sets in, and by hanging the meat at the proper temperature for the proper time, especially just before cooking.
 hammer, model civil war cannon, and bolt welding jig jig, dance of English origin that is performed also in Ireland and Scotland. It is usually a lively dance, performed by one or more persons, with quick and irregular steps. When the jig was introduced to the United States, it was often danced in minstrel shows. . Perforated pages with holes for three-ring binder. The author teaches at a technology high school.

([c]20082005 Book News, Inc., Portland, OR)
COPYRIGHT 2008 Book News, Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2008 Gale, Cengage Learning. All rights reserved.

 Reader Opinion




Article Details
Printer friendly Cite/link Email Feedback
Publication:SciTech Book News
Article Type:Book review
Date:Dec 1, 2008
Previous Article:Improved protocol for classification and analysis of stormwater-borne solids.
Next Article:Wireless quality-of-service; techniques, standards and applications.

Terms of use | Copyright © 2014 Farlex, Inc. | Feedback | For webmasters