Low-cost mold simulation now does packing, cooling.The latest version of Moldflow Mastics Advisers (MPA MPA medroxyprogesterone acetate. 7.0) features two now analysis modules that simulate simulate - simulation the packing phase of injection molding injection molding n. A manufacturing process for forming objects, as of plastic or metal, by heating the molding material to a fluid state and injecting it into a mold. and analyze cooling-channel design. It also contains now tools that optimize the mold-building process. MPA is a relatively simple, fast, and low-coat package of simulation and analysis software for part and mold design from Moldflow Corp., Wayland, Mass. The new Performance Adviser module simulates the packing phase and helps users to minimize undesirable part shrinkage Shrinkage The amount by which inventory on hand is shorter than the amount of inventory recorded. Notes: The missing inventory could be due to theft, damage, or book keeping errors. . This module Indicates if a part is likely to warp warp: see weaving. (1) See OS/2 Warp. (2) A parallel processor developed at Carnegie-Mellon University that was the predecessor of iWARP. Warp - OS/2 or deform beyond acceptable levels. Also now is the Cooling Circuit Adviser, which simulates the cooling phase and helps users optimize their mold designs for uniform cooling and faster cycles. MPA 7.0 has more now optimization tools that help quickly identify a suitable plastic material for a project and determine the most efficient way to deliver the melt through the injection mold. Also now are runner-system modeling tools and a plot of material orientation during processing. The new Connect to Consultants Tool helps users quickly link up with a plastics simulation consultant, if needed. Tel: (508) 358-5848, www.moldflow.com |
|
||||||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion