Low durometer line.A fluoroelastomer formulation has been developed for applications requiring a very low hardness. This compound was formulated using Tecnoflon fluoroelastomer polymer specifically developed for this unique characteristic. The formulation offers 48 durometer A hardness with low compression set. It is said to have very good molding characteristics such as good scorch safety, fast cure rate, excellent mold mold, name for certain multicellular organisms of the various classes of the kingdom Fungi, characteristically having bodies composed of a cottony mycelium. The colors of molds are caused by the spores, which are borne on the mycelium. release and good mold flow, according to according to prep. 1. As stated or indicated by; on the authority of: according to historians. 2. In keeping with: according to instructions. 3. the company. This compound is recommended for transfer and compression molding Compression molding is a method of molding in which the molding material, generally preheated, is first placed in an open, heated mold cavity. The mold is closed with a top force or plug member, pressure is applied to force the material into contact with all mold areas, and heat of gaskets, seals and other custom molded parts. The formulation can be used in some cases as an alternative to fluorosilicones or fluoroelastomer sponge, according to the company. Eagle Elastomer elastomer (ĭlăs`təmər), substance having to some extent the elastic properties of natural rubber. The term is sometimes used technically to distinguish synthetic rubbers and rubberlike plastics from natural rubber. Circle 61 on card |
|
||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion