Printer Friendly
The Free Library
19,122,083 articles and books
Member login
User name  
Password 
 
Join us Forgot password?

Legacy Electronics Offers First 2GB High-Speed Memory Module Available for 1U Chassis Server Group Design Applications With 1.2-Inch PCB Height.


Business Editors/High-Tech Writers

SAN CLEMENTE, Calif.--(BUSINESS WIRE)--July 24, 2002

Legacy Electronics announced the first 2GB PC2100 Registered DDR Dual Inline Memory Module (DIMM) that meets a 1.2-inch PCB PCB: see polychlorinated biphenyl.
PCB
 in full polychlorinated biphenyl

Any of a class of highly stable organic compounds prepared by the reaction of chlorine with biphenyl, a two-ring compound.
 height requirement and incorporates the Canopy(TM)(a) 3-D subassembly technology, which facilitates heat dissipation and impedance control.

The new DIMM is a Dual Data Rate (DDR) Synchronous Dynamic Random Access Memory (storage) Synchronous Dynamic Random Access Memory - (SDRAM, Synchronous DRAM) A form of DRAM which adds a separate clock signal to the control signals. SDRAM chips can contain more complex state machines, allowing them to support "burst" access modes that clock out a series of  (SDRAM (Synchronous DRAM) A type of dynamic RAM (DRAM) memory chip that has been widely used since the late 1990s. SDRAM chips eliminated wait states by dividing the chip into two cell blocks and interleaving data between them. ), registered 184-pin, error correcting code (ECC (1) (Error-Correcting Code) A type of memory that corrects errors on the fly. See ECC memory.

(2) (Elliptic Curve Cryptography) A public key cryptography method that provides fast decryption and digital signature processing.
) module, and the first to offer 2GB density at this PCB height.

The 2GB module is built using lower-cost, standard, 66-pin TSOPs (thin, small outline packages). "Engineering a module of this density and speed while keeping it manufacturable was a challenge; the Canopy technology facilitated the manufacturability," said Ken Kledzik, chief technology officer.

"Plus, we don't compromise the quality of our designs; we support decoupling capacitors for both upper and lower SDRAMs, using three TVSOP TVSOP Thin Very Small Outline Package  registers (some manufacturers only use one or two) and a PLL clock buffer."

Also available in 512MB and 1GB densities, the JEDEC-standard DIMM uses a 2.5V power supply and offers ECC (error detection and correction (algorithm, storage) error detection and correction - (EDAC, or "error checking and correction", ECC) A collection of methods to detect errors in transmitted or stored data and to correct them. This is done in many ways, all of them involving some form of coding. ).

Availability

The 2GB, 1.2-inch SDRAM DIMM is available with a 1-2 week lead time, with price discounts for volume quantities. A downloadable, four-page data sheet is available at www.legacyelectronics.com/files/8AL6MDAC-1xDG.pdf, or designers may call toll-free 888/466-3853, or e-mail: techsupport@legacyelectronics.com.

About Legacy Electronics

Founded in 1993 and located among South Orange County, California's new high-technology companies, Legacy Electronics is an ISO (1) See ISO speed.

(2) (International Organization for Standardization, Geneva, Switzerland, www.iso.ch) An organization that sets international standards, founded in 1946. The U.S. member body is ANSI.
 9001-registered electronics firm. Three years ago the company purchased and moved into new manufacturing headquarters to accommodate expansion of surface-mount technology (SMT (1) (Surface Mount Technology) See surface mount.

(2) (Station ManagemenT) An FDDI network management protocol that provides direct management. Only one node requires the software.

SMT - Station Management
) and automated test (ATE) equipment, as well as the hiring of additional personnel.

(a) Legacy Electronics' Canopy(TM) technology is a patented, 3-dimensional printed circuit board subassembly process using a single-sided reflow, which increases on-board memory capacity without pre-stacking components. Considered an alternative to traditional stacking technologies, Canopy(TM) reduces memory module manufacturing cost while reducing time-to-market and reliability issues, including thermal failures.

Note to Editors: A downloadable jpg e-photo of Legacy Electronics' new 1.2-inch height, 2GB DDR DIMM is available from http://www.legacyelectronics.com/images/8AS6MDLC-1JDG.jpg.
COPYRIGHT 2002 Business Wire
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2002, Gale Group. All rights reserved. Gale Group is a Thomson Corporation Company.

 Reader Opinion

Title:

Comment:



 

Article Details
Printer friendly Cite/link Email Feedback
Comment:Legacy Electronics Offers First 2GB High-Speed Memory Module Available for 1U Chassis Server Group Design Applications With 1.2-Inch PCB Height.
Publication:Business Wire
Geographic Code:1USA
Date:Jul 24, 2002
Words:362
Previous Article:ReShape Completes $12M Series B Funding with Canaan Partners and NEA; Investors See Opportunity in the Challenging IC Design Space.
Next Article:Monterey Design Systems Technologist Honored for Establishing Industry's Preeminent Ph.D. Conference; Dr. Olivier Coudert presented with SIGDA...



Related Articles
Kentron Technologies Announces 'The Gig' a 1.25-Inch High, PC133, 1GB FEMMA Memory Module, Lowest Profile Available in the Marketplace Today.
Kentron Technologies Announces the Lowest Profile, 1GB Registered, PC133 DIMM in the Industry; the 1.125-Inch Low Profile DIMM for the '1U' and the...
Dataram Offers Memory for Sun Microsystems Netra AX1105.
Legacy Electronics Boosts Memory Capacity.
Infineon Technologies Announces Availability of Low Profile DRAM Modules.
Dataram: first to expand HP/Compaq AlphaServer DS10L TO 2GB.
Legacy Electronics' New Point Seven DDR Memory Module First to Provide 1GB Density in Low, 0.7-inch Height; Eliminates Need to Angle DIMMs to Fit.
Legacy Electronics' New Low-Profile DDR2 DIMM with Canopy is First 2GB Module for Low-Height Blade Server Applications; Eliminates Need to Angle...
PCI Express switching and Remote I/O in the data center.
New 4GB Fully Buffered DIMM from Legacy Electronics Eliminates Need for Dual Die Devices, Offers Cost Savings.

Terms of use | Copyright © 2012 Farlex, Inc. | Feedback | For webmasters | Submit articles