Laser tool monitoring. (In Gear).Who: Blum LMT LMT left mentotransverse (position of fetus). , Inc. (Fort Mitchell, KY) What: LaserControl tool monitoring system Why you should care: LaserControl uses a visible red light laser to accomplish in-machine tool length and diameter measuring and tool breakage detection with a minimal effect on process time. The positions of all of the cutters in multi-cutter tools can be monitored in radial and axial directions while the tool rotates at full nominal rpm, and any setting or clamping errors can be quickly identified. Blum says that LaserControl is effective in high-speed, high-velocity and high-accuracy machining applications that require tool integrity. Pertinent Data: Optical components are protected from chips and coolant coolant (kōō´l  nt),n by a pneumatic shutter and air barrier. The laser used is a Class 2 VDE (1) (Video Display Editor) A WordStar and WordPerfect-compatible shareware word processor written by Eric Meyer. (2) (Verband Deutscher Elektrotechniker) The German counterpart of the U.S. Underwriters Lab. 0837, which does not require specific protective measures. Software measuring routines have been developed for many leading CNC (Computerized Numerical Control) See numerical control. CNC - Collaborative Networked Communication controls. Measuring cycle routines include: length of concentric tools, tap drills, engraving needles and reamers and acentric acentric /acen·tric/ (a-sen´trik) 1. not central; not located in the center. 2. lacking a centromere, so that the chromosome will not survive cell divisions. a·cen·tric adj. tools like endmills and facemills. More Info: Enter 4. |
|
||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion